Manuale d’uso / di manutenzione del prodotto TB14H del fabbricante GarrettCom
Vai alla pagina of 60
www Garre t t Com com .. www Garre t t Com com .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) i www Garre t t Com com .. Magnum ™ TB14 and TB14H 10Mb/s Media Converters Installation and User Guide Part #: 84-00126 Rev.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) ii www Garre t t Com com .. Federal Communications Commission Radio Frequency Interferen ce Statement This equipment generate.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) iii www Garre t t Com com .. Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) iv www Garre t t Com com .. TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specs Model TB14 and TB14H ( TP and B NC media ) .
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) v www Garre t t Com com .. 4.0 OPERATION ....................................................................................... 35 4.1 Power Requireme nts, Power Supply Types for TB14 and TB 14H .
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) vi www Garre t t Com com .. Revisions Rev C 09/04: Minor updates on UL R equirement s on power supplies Rev C 06/04: Minor updates on Agency approvals and power supplies Rev C 07/03: Minor Update, MK3 uni ts in Series.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 1 www Garre t t Com com .. 1.0 SPECIFICATIONS 1.1 Technical Specs Model TB14 and TB14H ( Standard TP and BNC media ) Performance: Data Rate: 10 Mbps (IEEE 802.3), half duplex mode Network Standards: Ethernet: IEEE 802.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 2 www Garre t t Com com .. Maximum Standard Ethern et Segment Lengths: 10BASE-T (twisted pair): 100 m (328 ft) 10BASE2 ThinNet (BNC): 185 m (607 ft) Note: Magnum Media Converters DO NOT support full length Ethernet segments.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 3 www Garre t t Com com .. Power Supply These products are intended to be supplied by a Listed, Direct Plug- In power unit, marked “Class 2”, or a List ed ITE Power Supply, marked “LPS”, which has suitably rated output voltage (i.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 4 www Garre t t Com com .. 100-240V AC at 50-60Hz, for “-Hd” high temp. with IEC320 connectors built-in 100-240V AC at 50-60Hz, for “-Hi” high temp with IEC320 connectors built-in DC to unit : 12V DC, 2.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 5 www Garre t t Com com .. -48V DC internal (range of 36 to 60V DC) Power Consumption : 3 watts typical and 5 watts max.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 6 www Garre t t Com com .. Cooling Method: Convection, plus the case is us ed as a heat sink on “ H” models Media Convert.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 7 www Garre t t Com com .. Metal Mounting clips : included DIN-Rail mounting option : Model # DIN-RAIL KIT Rack-mount option : MC14-TRAY, see http:/ /www.gar rettc om.c om/mc _tra y.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 8 www Garre t t Com com .. 1.2 Summary of models and desc r i ptions : TB14-d = TP to BNC, half-duplex, 120V 60Hz AC power su.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 9 www Garre t t Com com .. 2.0 INTRODUCTION This section describes the TB14 and TB14H models, including appearance, features and typical applications.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 10 www Garre t t Com com .. Remove the Magnum Media Converter from the shipping container. Be sure to keep the shipping container should you need to ship the unit at a later date.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 11 www Garre t t Com com .. The TB14 regular-package units are for office and wiring closet environments and use an external AC power supply for either 0° to 40°C or the more stressful industrial Magnum TB14 Magnum TB14H Li nk R R P wr COAX TWISTED PA IR C 12 V D C .
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 12 www Garre t t Com com .. 0° to 50°C ambient temperature. A rugge d metal case with convection cooling is featured. The units can be mount ed securely on a closet wall or the side of cabinet, or by using the metal mounting clips included.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 13 www Garre t t Com com .. limitations will not be exceeded in the segment. All units are com patible with Ethernet V 1.0 / 2.0 specifications and comply with IEEE 802.3 standards.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 14 www Garre t t Com com .. Magnum TB14s 10Mb Media Converters are de signed for quick and easy installation even in very tight spaces. Media cables ar e easily attached to the corresponding Media Converter.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 15 www Garre t t Com com .. All of the Magnum “TB14s” Media Converters comply with the IEEE 802.3 10BASE-T specification for 10 Mb/sec traffic vi a shielded (STP) or unshielded twisted pair (UTP) segments.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 16 www Garre t t Com com .. 2.3 Features and Benefits Reduces Network Costs Magnum Media Converters offer the ideal solut.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 17 www Garre t t Com com .. Rugged metal case, industrial grade TB14s Media Converters have a robust design and are packaged in a rugged sheet metal enclosures to ensure high reliability and durability even when placed in extended temp; e.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 18 www Garre t t Com com .. 2.4 Applications The primary function of a 10Mb Ethernet Media Converter is to permit two different 10Mb media types to coexist ine xpensively within the same network by allowing data to be transmitted and recei ved between different media types.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 19 www Garre t t Com com .. In this application, in a Industrial envir onment where extended temp . supported units is a requirement, the existing BNC network needs to connect with RJ-45 ports in a hub / switch to expand the existing application.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 20 www Garre t t Com com .. The TB14 10Mb Ethernet Media Converter c onnects twisted-pair cabling to existing BNC cabling. The operation is half-duplex in all situations. See Section 3.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 21 www Garre t t Com com .. 3.0 INSTALLATION This section describes the insta llation of the Magnum TB14s Media Converters, including location, segment distance calculation and media connection.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 22 www Garre t t Com com .. mounting clips and screws are included fo r a rugged and secure mounting in any orientation. Installation of the Magnum TB14 and TB14H Me dia Converters is a simple procedure.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 23 www Garre t t Com com .. 3.2 MC14-TRAY for Rack Mounting of TB14 and TB14H Media Converters For 19” rack-mounting of Magnum TB14s Me dia Converters, a rack-mount tray is available, MC14-TRAY.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 24 www Garre t t Com com .. A typical installation of the model MC14-TRAY, 19” rack-mount tray will hold a few (often three to eight) 14-series Media Convert ers, with their power supplies plugged into power strips (not included) in the rear area of the tray.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 25 www Garre t t Com com .. MC14-TR+PS9X2 Model has two groups of ei ght units per power s upply. These models are equipped with auto- ranging AC input to the power supplies for use worldwide.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 26 www Garre t t Com com .. The side-view picture shown here is an ex ample of an installation of the model MC14- TR+PS9, 19.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 27 www Garre t t Com com .. 3.4 DIN-Rail mounting option The Magnum TB14 and TB14H Media Converter s, designed for use in “Factory Floor” Industrial Ethernet environments, are also available for DIN-Rail mounting in an enclosure having DIN Rails.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 28 www Garre t t Com com .. 3.5 Calculating Overall Segment Distance Important Note : Special consideration must be given to maximum cable segment lengths of a Magnum TB14 and TB14H Media Converter.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 29 www Garre t t Com com .. Connectivity between ThinNet and TP Eth ernet Media. Media Distance Formula for Magnum Med ia Converters: Li nk R R P wr COAX TWISTED PA IR C 12 V D C .
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 30 www Garre t t Com com .. X% + Y% < 100% Where X = The segment distance on one side of the Magnum Media Converter divided by the Standard Maximum Media Distance for that media type, x 100%.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 31 www Garre t t Com com .. Note 1 : Where more than one media converter is used in one segment run, the percentages for all of the cabling lengths in th e run must be added together and must not exceed 100%.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 32 www Garre t t Com com .. 3.6 Connecting Ethernet Media It is recommended that both of the media (TP and BNC) be connected with power off so that both ports are connected wh en power is applied to the logic in the electronics.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 33 www Garre t t Com com .. 1. Using standard 10BASE-T media, insert either end of the cable with an RJ-45 plug into the RJ-45 connector of the Magnum Media Converter. 2. Connect the other end of the cable to the corresponding device.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 34 www Garre t t Com com .. Connect the ThinNet coax cable to the BNC connector on the TB14s Media Converter in the same manner as is done for an y standard BNC connection. Be sure that the BNC segment is properly terminat ed using a standard “T” connector.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 35 www Garre t t Com com .. 4.0 OPERATION This section describes the operati on of the Magnum TB14 and TB14H 10Mb Media Converters, including power supply re quirements, up-link switch functionality, and a description of all LEDs.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 36 www Garre t t Com com .. The 12V DC power input has a plug of 2.5mm, center +ve , with 6 ft. cord. All the other AC power supply info detail is provided in Technical Specifications Section 1.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 37 www Garre t t Com com .. information about the 12 VDC, the 24V DC and the –48V DC is provided in the Technical Specifications Section 1.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 38 www Garre t t Com com .. and have built-in screw terminals for secure a ttachment of the power leads. Three models support a range of power input types. The th ree model choices are for use with 12VDC, 24VDC or -48VDC power.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 39 www Garre t t Com com .. Input current : 0.8 amp max.(9V DC) 0.4 amp max.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 40 www Garre t t Com com .. The connection procedure is straightforwar d. Simply insert the DC leads to the TB14H’s power terminals, positive (+) a nd negative (-) screws. The use of Ground (GND) is optional; it connects to the TB14H cha ssis.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 41 www Garre t t Com com .. 4.4 Dual LEDs, front-panel and side -panel (Magnum TB14 and TB14H) LED Description PWR Illuminates GREEN to indicate power applied. LINK/L (TP) Illuminates GREEN, to indicate proper connectivity on the 10BASE-T network segment.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 42 www Garre t t Com com .. 50 Ω ∝ End view, TB14 ’ s RJ45 BNC U pl in L COL/C (per port) Illuminates AMBER to indicate a collision on the segment.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 43 www Garre t t Com com .. 4.6 Up-Link (Cross-over) Switch The TB14 and TB14H Media Converter is equi pped with an Up-Link slide switch.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 44 www Garre t t Com com .. 5.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 45 www Garre t t Com com .. 5.1 Before Calling for Assistance 1. If difficulty is encountered when insta lling or operating the unit, refer back to the Installation Section of the applicable chapter of this manual.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 46 www Garre t t Com com .. 4. If the problem is isolated to a network device other than the Magnum TB14/TB14H 10 Mb/s Media Converters product, it is recommended that the problem device is replaced with a known good device.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 47 www Garre t t Com com .. 5.2 When Calling for Assistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 48 www Garre t t Com com .. 3. It is useful to include other networ k equipment models and related hardware, including personal computers, workstati ons, terminals and printers; plus, the various network media ty pes being used.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 49 www Garre t t Com com .. Product name Serial Number (or Invoice Number) Packing List Number (or Sales Order Number) Date of installation Failure sy mptoms, including a full description of the problem.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 50 www Garre t t Com com .. No Problem Found. GarrettCom reserves the right to charge for the testing of non-defective units under warranty. Testing and repair of produc t that is not under warranty will result in a customer (user) charge.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 51 www Garre t t Com com .. 5.4 Shipping and Packaging Information Should you need to ship the unit back to GarrettCom, please follow these instructions: 1. Package the unit carefully.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 52 www Garre t t Com com .. 4. Ship the package to: GarrettCom, Inc. 47823 Westinghouse Dr.
TB14 and TB14H 10Mb Media C onverters Installation and User Gui de (09/04) 53 www Garre t t Com com .. APPENDIX A: WARRANTY INFORMATION GarrettCom, Inc. warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of shipment by GarrettCom.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il GarrettCom TB14H è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del GarrettCom TB14H - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso GarrettCom TB14H imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul GarrettCom TB14H ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il GarrettCom TB14H, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del GarrettCom TB14H.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il GarrettCom TB14H. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo GarrettCom TB14H insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.