Manuale d’uso / di manutenzione del prodotto CDV210HH8 del fabbricante FUNAI
Vai alla pagina of 26
Supplied Accessories AC outlets Plug in 4 5 From TV From DVD/VCR Please refer to “Connections” on page 6. Cable T V signal ANT-OUT ANT-IN RF cable (supplied) (Back of DVD/VCR) (Back of T V ) or An.
– 2 – EN Precautions Precautions This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to po ssible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
EN – 3 – Precautions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
– 4 – EN Precautions Location and Handling • Do not stand this unit up vertically. Install this unit in a horizontal and stable position. Do not place anything directly on top of this unit.
EN – 5 – Precautions About the Video Cassettes and Discs Playable Discs Unplayable Discs NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM / DVD-Audio / CD-i / Photo .
– 6 – EN Setup SETUP > AUDIO > DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to other equipment (an MD deck or DAT deck etc.
EN – 7 – Setup Admiral: AUX Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93 GE: INPUT, TV/VCR, 00, 90, 91, 92, 93 Hitachi: INPUT, AUX JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3 Kenwood: AUX LXI-Series: 00.
– 8 – EN Setup 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6. 2 Select your language when turning this unit on for the first time. Then press [ B ] to go to next step.
EN – 9 – Setup 6: VIDEO IN jack Connect a cable coming from the video out jack of a camcorder, another VCR or an audio-visual source (laser disc player, video disc player, etc.) here. 7: DVD/VCR VIDEO OUT jack Connect the supplied video cable here through the video in jack of a television.
– 10 – EN Setup ST ANDBY -ON DISPLA Y VCR DVD P A USE SLOW VCR/TV SKIP/CH. PLA Y STOP RECORD MENU SETUP TOP MENU MODE ZOOM SUBTITLE T- S E T ANGLE ENTER RETURN SEARCH MODE REPEA T A-B OPEN/CLOSE /EJECT SPEED AUDIO CLEAR/ C.
EN – 11 – VCR Functions 1 Press [SEARCH MODE] once. 2 To select Index Mark 3 4 After searching, it automatically starts playback. 1 Press [SEARCH MODE] twice. 2 Select the desired length of time for fast forwarding or rewinding. 3 4 After searching, it automatically starts playback.
– 12 – EN VCR Functions 1 Press [MENU] , then select “TIMER PROGRAMMING”. 2 Select an empty program number. Then press [ B ] to go to next step. 3 Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”. Then press [ B ] to go to next step. 2 Press [ B ] for “AUTO REPEAT”, “ON” or “OFF”.
EN – 13 – VCR Functions 10 Press [SUBTITLE/T-SET] to set timer standby mode. • TIMER indicator on the front panel lights up. The unit will change to the DVD mode. 6 Select “AM” or “PM”. Then press [ B ] to go to next step. 7 Repeat the procedure in steps 5 and 6 to set the end time.
– 14 – EN VCR Functions Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. DIGITAL AUDIO OUT COAXIAL ANT -OUT ANT -IN AUDI O OUT DVD DVD/VCR VCR .
EN – 15 – DVD Functions ST ANDBY -ON DISPLA Y VCR DVD P A USE SLOW VCR/TV SKIP/CH. PLA Y STOP OPEN/CLOSE /EJECT SPEED AUDIO 123 456 789 0 +10 DVD Functions Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
– 16 – EN DVD Functions 1 1 2 1 Search Functions Using Time Search DV DV D 2 within 5 seconds 03/24 001/002 -- : -- : -- OFF 03/24 001/002 -- : -- : -- OFF PLA Y Press cursor [ B ] to highlight .
EN – 17 – DVD Functions On-Screen Display You can check the information about the current disc by pressing [DISPLAY] on the remote control. DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DI.
– 18 – EN DVD Functions 2 Select “RANDOM”. Then press [ENTER] . The RANDOM playback will start. 1 at your desired starting point (A) 2 1 Press [MODE] once during stop mode.
EN – 19 – DVD Functions 1 1 1 Special Settings Audio Language DV DV D This unit allows you to select an audio language (if multiple languages are avail- able on disc) during DVD playback. 1 1. ENG Dolb y D 5.1ch 48k/3 Each time you press [AUDIO] or [ s / B ] , the audio language changes as example below.
– 20 – EN DVD Functions 2 Select the desired item. LANGUA GE AUDIO SUBTITLE DISC MENU PLA YER MENU 1 Press [SETUP] . ENTER ENTER ENTER SETUP ENTER ENTER ENTER Hint ∗ 1 • Language options are not available with some discs.
EN – 21 – DVD Functions 3 Select the desired item. DISPLA Y_TV ASPECT TV ASPECT STILL MODE 4:3 LETTER BOX 4:3 P AN & SCAN 16:9 WIDE 3 Select the desired item. AUDIO_DRC DRC DOWN SAMPLING DOLBY DIGIT AL ON OFF Hint STILL MODE: • Select “AUTO” usually.
– 22 – EN DVD Functions Parental Control limits the viewing of discs that exceed your settings. (An incorrect password will not be acceptable.) This feature prevents your children from viewing inappropriate materials. Parental Levels Parental Level allows you to set the rating levels of your DVD discs.
EN – 23 – Information Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist. • Some functions are not available in specific modes, but this is not a malfunction.
– 24 – EN Information Specifications Video Heads : Four Heads Output signal format : NTSC color Power source : 120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption : 21 W (standby: 3.8W) Operating temperature : 41°F (5°C) to 104°F (40°C) Dimensions : W : 17 3/16” (435mm) H : 3 3/4” (94mm) D : 9 3/16” (233mm) Weight : Approx 6.
EN – 25 – cut here 1 Turn on the TV and set it to channel 3. • If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section. 2 Select your language when turning this unit on for the first time. Then press [ B ] to go to next step.
Printed in China E8C1UCD 1VMN23713 ★★★★★ VCR Playback DVD/CD Playback 7 Remote Control 8 Before: Turn on the TV and set it to channel 3. • If channel 3 has been already oc- cupied for broadcasting, see “RF Output Channel” section.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il FUNAI CDV210HH8 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del FUNAI CDV210HH8 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso FUNAI CDV210HH8 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul FUNAI CDV210HH8 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il FUNAI CDV210HH8, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del FUNAI CDV210HH8.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il FUNAI CDV210HH8. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo FUNAI CDV210HH8 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
