Manuale d’uso / di manutenzione del prodotto NC-400D del fabbricante FujiFilm
Vai alla pagina of 47
DIGIT AL COLOR PRINTER NC - 400D PRINTER DRIVER for Windows ® USER’S MANUAL Fir st Edition.
IMPOR T ANT INFORMA TION REGARDING THIS MANUAL • Transfer or duplication of all or any part of the content of this manual without prior authorization from Fuji Photo Film Co. Ltd is forbidden by law. • The contents of this manual are subject to change without notice.
CONTENTS 1. Exif Viewer ............................................................................... 4 1.1 INSTALLING Exif Viewer .......................................................................... 6 1.2 USING Exif Viewer ...................
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 4 NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 1. Exif Viewer Exif Viewer is an image viewing application that provides an Explorer-like user interface for quick and convenient browsing of image files stored in folders.
2 Click the “Recording” tab. The “Enable CD Recording on this drive” checkbox should be ticked. Deselect this checkbox. ☞ CAUTION Deselecting this checkbox disables the function that allows you to write data to a CD-R or CD-RW disk. When you want to write data to a CD-R or CD-RW disk, tick this checkbox again.
1.1 1.1 INST ALLING Exif Viewer 1 Load the enclosed CD-ROM into the CD-ROM drive of the Windows PC that will use the printer . The installer window automatically appears. If the installer window does not appear , run the “SETUP .exe” pr ogram on the CD-ROM.
1.2 1.2 USING Exif Viewer 1.2-1 Launching Exif Viewer and an Exif Viewer Overview 1 From the Windows Start menu, click “Programs (P)” ➔ “Exif Viewer” ➔ “Exif V iewer” to launch Exif V iewer . 2 When you select a folder in the left-hand pane, thumbnails of the images in that folder are displayed in the right-hand pane.
3 When you double-click directly on one of the thumbnail images in the right-hand pane, the full-size image is displayed in its own image window . T o close the image window , click the button in the top-right corner of the window .
1.2-2 Viewing Images 1 Selecting the folder Select the desired folder by clicking it in the folder tree display area in the Main Window. The images in that folder are then displayed. Clicking the to the left of the folder shows a drop-down display of the folders contained in the selected folder.
4 Scrolling ar ound the image display You can use the scroll bars in the Image Window to scroll to different parts of the image. Also, by clicking the button in the Toolbar or selecting “Hand tool (.
■ Browsing the bookmarks Selecting a folder stored in the “Bookmarks (B)” menu displays the images in that folder. ■ Editing the bookmarks To edit the bookmarks, open the Bookmarks dialog box by selecting “Organize Bookmarks (O )” from the “Bookmarks (B )” menu.
7 Changing the Thumbnail Display Mode ■ To change the order in which thumbnail images are displayed Select “Arrange Thumbnails (A )” from the “View (V)” menu or “Arrange Thumbnails” pop- up menu and specify one of the following as the thumbnail display order.
8 Vi ewing the image information To view the image information, select a thumbnail and click the button or select “Information (I )” from the “File (F )” menu.
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 14 9 V iewing a slide show When you select “Slide Show (S)” from the “File (F)” menu, the “Slide Show Setting” dialog box opens and you can run a slide show. The slide show displays the image files in the thumbnail display area.
1.2-3 W orking With Image Files 1 Selecting images Images in the Main Window can be selected in the following ways. To select one image : Clicking a thumbnail image selects the image. To select all the images : From the “Edit (E )” menu, select “Select All (A )” to select all the images in the thumbnail display area.
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 16 3 Renaming image files You can rename an image file simply by clicking in the file name display area and typing in a new file name.
1.2-4 Editing Images 1 Image window To edit an image, begin by opening the image you want to edit. You can open the image for editing by either double-clicking the thumbnail image directly or by selecting the thumbnail and doing one of the following: A.
3 Copying the image to the clipboard By selecting “Copy (C )“ from the “Edit (E )“ menu, you can copy the selected section of the image to the clipboard. 4 Changing the image size When you click the button in the Toolbar or select “Image Size (S )” from the “Image (I )” menu, the “Image Size” dialog box opens.
6 Saving the image When you click the button or select “Save As (A)” from the “File (F )” menu, the “Save As” dialog box appears. Use this dialog box to specify the file format and destination folder before saving the image. ☞ CAUTION Exif Viewer can save the following file formats: Exif-JPEG, Exif-TIFF, BMP.
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 20 1.2-5 Printing the image 1 Page setup When you select “Page Setup (T )” from the “File (F )” menu, the standard “Page Setup” dialog box appears. You can use this dialog box to specify parameters such as the paper size and orientation.
[Preview] button: Click this button to see a preview of the image to be printed. [Cancel] button: Click this button to stop printing and close the “Print” dialog box. [OK] button: Click this button to start printing using the currently selected settings.
3 Printing an index If you select several images and then select “Index Print (N)” from the “File (F)” menu, the “Index Print” dialog box opens. You can then use this dialog box to print an index of the images. ✽ The “Print” dialog box displayed by the [Properties] button differs depending on the printer driver you are using.
1.2-6 Exiting Exif Viewer To exit Exif Viewer, select “Exit ( X )” from the “File ( F )” menu or click the button in the top-right corner in the Main Window.
1.3 1.3 TROUBLESHOOTING ■ Problems with Exif Viewer NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 24 Message Cause Solution Re-insert the disk. Use the ”Refresh” menu. Re-insert the disk. Use a file format supported by Exif Viewer (Exif-JPEG, Exif-TIFF, JPEG (baseline only), BMP).
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 25 Message Cause Solution Insufficient disk capacity. Process aborted. Cannot move “filename”. Copy ? “Filename” is in use. The files may not be used correctly. OK ? File is locked. “Filename” is broken or not in the usable format.
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 26 Message Cause Solution Part of “filename” will be cropped because the image is larger than the printer output size. Registered application not found. Could not execute the registered application.
1.4 1.4 UNINST ALLING Exif Viewer 1 Quit all the currently running applications. 2 Close all the files. 3 Open the “My Computer” window and double-click “Add/Remove Programs” in the Contr ol Panel. 4 The “Add/Remove Programs Pr operties” window appears.
5 When the confirmation message appears, click the [Y es] button. Check your selection carefully since the process cannot be cancelled once you click the [Y es] button. 6 Automatic uninstallation begins. When uninstallation ends, click the [OK] button.
2. PRINTER DRIVER The specifications for the NC-400D printer driver are given below. ● Compatible printers FUJIFILM Printpix DIGITAL COLOR PRINTER NC-400D ● PC requirements RAM: Minimum 96 MB (128.
2.1 2.1 INST ALLING THE NC-400D PRINTER DRIVER ☞ CAUTION Do not use the Add Printer wizard in the Windows printer folder to install the printer driver. The driver must be installed from the menus provided on the enclosed CD- ROM. 1 Quit all the applications currently running on Windows.
7 Click the [Installation of Printer Driver] button. 8 The window for entering the printer ’ s SCSI host appears. T o use automatic printer detection, click the [Reference...] button. T o specify the settings manually , enter the value directly and then click the [OK] button.
9 A list of the connected printers is displayed. Select the printer to be used and click the [OK] button. 10 The SCSI host for the NC-400D is entered automatically .
11 The window for entering the printer's registration name appears. Enter the registration name you want to use in place of the displayed name. If you want to use the displayed name, simply click the [OK] button. If you entered a printer name that has already been used, the message shown below appears.
12 If there is a printer driver already installed on the PC, one of the messages shown below appears. Click the [OK] button or [Cancel] button. If you clicked the [OK] button, register the additional printer by repeating the procedure on page 31 from step 8 onwards.
2.2 2.2 USING THE NC-400D PRINTER DRIVER ☞ CAUTION The NC-400D printer driver provides functions that allow you to use your printed images in a variety of ways. Depending on the software application that is using the printer driver, enabling these function settings may result in printed images that differ from what is shown on your screen.
2 The NC-400D printer properties window appears. Specify the settings in the “Paper” and “Adjustment” tabs. ☞ CAUTION The number of tabs displayed in addition to “Paper” and “Adjustment” varies depending on your PC hardware and software.
☞ CAUTION If you are using a software application that allows you to select the paper size when you print, specify the NC-400D as the printer to be used, list the NC-400D paper sizes and then select the paper size.
[Print quality adjustment setting] To obtain a better quality print of a photographic image, you can specify print quality adjustment. The available settings are as follows: “Enable” “Disable”.
2.3 2.3 UNINST ALLING THE NC-400D PRINTER DRIVER 1 Switch off the PC and disconnect the NC-400D. 2 Switch your PC on. 3 Quit any application programs that are currently running. 4 Load the enclosed CD-ROM into the PC’ s CD-ROM drive. 5 When the main menu appears, click the [Quit] button to exit the menu.
7 A window appears asking for confirmation. Click the [OK] button. 8 If other FUJIFILM printer drivers are installed, one or more of the messages shown below may appear .
9 When uninstallation is completed, the dialog box shown below appears. NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 41 <When restarting is required> <When restarting is not required> Click the [Yes] button. Click the [OK] button.
3. Acrobat Reader AND PERUSAL OF MANUAL (USER'S MANUAL) To read the PDF-format user’s manual, Adobe Systems’ Acrobat Reader must be installed on the PC. If Acrobat Reader is already installed on the PC, you can omit the Acrobat Reader installation.
3.2 3.2 READING THE USER’S MANUAL 1 Click the [Perusal of manual] button. 2 Acrobat Reader starts up and the “USER'S MANUAL” appears. NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 4.
4. TROUBLESHOOTING Problem Check this Solution NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 44 I can’t print. The printer suddenly stopped printing.
NC-400D PRINTER DRIVER for Windows ® USER’S MANUAL 45 APPENDIX BMP (bitmap) Standard format for image data in Windows. The file extension for bitmap files is “.bmp”. Exif A full-color image format for digital still cameras. This format is compatible with TIFF and JPEG and is supported by most image processing software.
Scroll bar Bars that allow you to move an image up, down, left and right in small increments so that portions not shown in the window can be viewed. Dialog box A window used for specifying settings. Time stamp The time stamp records the date on which a file was last updated.
26 - 30, Nishiazabu 2 - chome, Minato - ku, Tokyo 106 - 8620, Japan SR00979-00 ( 1 ) FGS-204111-SZ.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il FujiFilm NC-400D è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del FujiFilm NC-400D - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso FujiFilm NC-400D imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul FujiFilm NC-400D ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il FujiFilm NC-400D, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del FujiFilm NC-400D.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il FujiFilm NC-400D. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo FujiFilm NC-400D insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
