Manuale d’uso / di manutenzione del prodotto TDM-7574E del fabbricante Alpine
Vai alla pagina of 19
EN DE FR ES IT SE R R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
.
1 -EN Contents Operating Instr uctions W ARNING W ARNING .................................................. 2 CA UTION ................................................... 2 PRECA UTIONS ......................................... 2 Basic Operation Detaching the Front Panel .
2 -EN WARNING The e xclamation point within an equilateral triangle and "W ARNING" are intended to aler t the user to the presence of impor tant operating instructions. F ailure to heed the instructions will result in se vere injur y or death.
3 -EN T ape Head Cleaning Periodic cleaning (approximately every 20 hours of use) of the tape head with a wet type head-cleaning cassette tape (available at audio stores) is necessary for best performance. Fuse Replacement When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder .
4 -EN Basic Operation Detaching the Fr ont P anel 1 Press the PWR (P ower) b utton to tur n off the power . 2 Press the (Release) button until the front panel pops out. 3 Grasp the left side of the front panel and pull it out. NO TES • The front panel may become hot (especially the connector terminals).
5 -EN 2 Press and hold the A.S.U . (Automatic Setup) button f or at least 3 seconds to activate the A.S.U . mode. "ASU" blinks in the displa y . The unit automatically perf or ms the follo wing operations. 1. Activates the A uto Memor y mode.
6 -EN 4 Press the DN g or f UP button to automatically seek f or a station downward or upward respectiv ely . The unit will stop on the ne xt station it finds. Press the same button again to seek the ne xt station. Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory .
7 -EN A utomatic Memory of Station Presets 1 Press the SOURCE button until the r adio frequency appears in the displa y . 2 Press the BAND button repeatedly until the desired radio band is displa yed. Each press changes the radio bands as f ollows: → F1 → F2 → AM 3 Press and hold the A.
8 -EN Inser ting/Ejecting Cassette 1 Inser t a cassette tape into the slot with the open side f acing r ight. When the cassette is loaded, the pla yer automatically star ts tape pla yback and indicates "T APE" in the display . 2 Press the Eject ( c ) button when y ou want to eject the cassette tape.
9 -EN F ast Forward and Re wind 1 Press the DN g or f UP button during tape pla y to fast rewind or f orward the tape respectively . The tape side indicator or blinks indicating the direction of the tape.
10 -EN Contr olling CD Chang er (Optional) The CD controls on the TDM-7574E will function only when a CD Changer (M-Bus) is connected. 1 Press the SOURCE button to activ ate the CD Changer . The display sho ws the disc number and trac k number . NOTE T o start play or pause playback, pr ess the : / J button.
11 -EN M.I.X. (Random) Pla y 1 Press and hold the M.I.X. button in CD pla y for at least 2 seconds to turn on the M.I.X. mode. When this mode is turned on, the tracks on the currently pla ying disc will be played bac k in a random sequence. T o cancel the M.
12 -EN Inf or mation CD CD Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playbac k sound is wavering. • Moisture condensation in the CD Module.
13 -EN Indication for CD Changer • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Malfunction in the CD Changer . - Consult your Alpine dealer . Press the magazine eject button and pull out the magazine.
14 -EN Installation and Connections Before installing or connecting the unit, please read the follo wing and pages 2 and 3 of this manual thor oughly for pr oper use . W arning USE ONL Y VEHICLES WITH A 12 VOL T NEGA TIVE (–) GROUND. Check with your dealer if you are not sure.
15 -EN 3 Slide the TDM-7574E into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver.
16 -EN Installation and Connections Connections Antenna To power antenna To amplifier or equaliser Ignition Key Front right Rear right CD Changer (Sold Separately) Speakers Amplifier Rear left Front left Battery TDM-7574E A DIN Connector PIN Configuration.
17 -EN 1 Antenna Receptacle 2 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicab le. NOTE This lead should be used only for contr olling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal pr ocessor , etc.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alpine TDM-7574E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alpine TDM-7574E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alpine TDM-7574E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alpine TDM-7574E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alpine TDM-7574E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alpine TDM-7574E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alpine TDM-7574E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alpine TDM-7574E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
