Manuale d’uso / di manutenzione del prodotto CDM-7854E del fabbricante Alpine
Vai alla pagina of 19
.
.
1 -EN Contents Operating Instr uctions W ARNING W ARNING .................................................. 2 CA UTION ................................................... 2 PRECA UTIONS ......................................... 2 Basic Operation Detaching the Front Panel .
2 -EN WARNING The exc lamation point within an equilateral triangle and "W ARNING" are intended to aler t the user to the presence of important operating instructions. Failure to heed the instructions will result in severe injury or death. DO NOT DISASSEMBLE OR AL TER.
3 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Y our player accepts only one disc at a time for playback.
4 -EN Detaching the Fr ont P anel 1 Press the PWR (P ower) b utton for more than 3 seconds to turn off the power . 2 Press the (Release) button at lo wer left cor ner until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
5 -EN A udio Mute Function Activating this function will instantly lo wer the volume le vel b y 20 dB. 1 Press the MUTE button to activate the MUTE mode. The audio lev el will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its pre vious lev el.
6 -EN Basic Operation CT H M CLK Displaying Time 1 Press the CLK (clock) b utton repeatedly until the clock time is displa yed. Each press changes the modes as f ollows: Radio mode. ↔ Clock priority mode Radio frequency CD Player/Changer(CDM-7854E onl y) modes → T rac k No.
7 -EN A utomatic Seek T uning 1 Press the SOURCE button until a r adio frequency appears in the displa y . 2 Press the BAND button repeatedly until the desired radio band is displa yed. Each press changes the band: → F1 → F2 → AM 3 Press the TUNE button to illuminate the DX and SEEK indicators in the displa y .
8 -EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset b uttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.
9 -EN Storing into Direct Access Preset (D .A.P .) Band A combination of radio stations in any band (up to 6 stations) can be manuall y preset into the D .A.P . band. 1 Press and hold the D .A.P . button f or more than 2 seconds until the D .A.P . indicator appears.
10 -EN Inser ting/Ejecting Disc 1 Inser t a CD half wa y into the slot with the label side f acing up. The player automatically dr aws the disc into the disc compar tment. The Disc indicator appears to show that a disc is loaded. NOTE Thr ee-inch (8cm) CD's can be used.
11 -EN Contr olling CD Chang er (Optional) (CDM-7854E only) If an optional Alpine 6-disc CD Changer is connected to the 8-pin DIN connector (M-Bus) of the CDM-7854E, you can control the CD changer using the CDM-7854E.
12 -EN Inf or mation CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. • Moisture condensation in the CD Module.
13 -EN Specifications FM TUNER SECTION T uning Range 87.5 – 108 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB AM TUNER SECTION T uning Range 531 – 1,602 kHz Sensitivity (IEC Standard) 22.
14 -EN Installation and Connections Before installing or connecting the unit, please read the follo wing and pages 2 and 3 of this manual thor oughly for pr oper use . W arning USE ONL Y VEHICLES WITH A 12 VOL T NEGA TIVE (–) GROUND. Check with your dealer if you are not sure.
15 -EN Installation 1 Remov e the Detachable F ront P anel (refer to page 4). Slide mounting slee ve from main unit (see “Removal” on this page). Slide the mounting slee ve into the dashboard. NOTE Please examine the installation. Make certain that no external pr essure is applied to either the top of the unit or the r emovable nosepiece.
16 -EN Grey SPEAKER RIGHT FRONT REMOTE TURN-ON Red IGNITION Y ellow BATTER Y Black GND Blue/White Grey/ Black SPEAKER RIGHT REAR Violet/ Black Green Violet SPEAKER LEFT REAR Green/ Black White/ Black .
17 -EN 1 Antenna Receptacle 2 P ower Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. 3 Remote T ur n-On Lead (Blue/White) (CDM- 7854E only) Connect this lead to the remote turn-on lead of your amplifier or signal processor .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alpine CDM-7854E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alpine CDM-7854E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alpine CDM-7854E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alpine CDM-7854E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alpine CDM-7854E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alpine CDM-7854E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alpine CDM-7854E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alpine CDM-7854E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
