Manuale d’uso / di manutenzione del prodotto 500L (2016) del fabbricante Fiat
Vai alla pagina of 472
OWNER’S MANUAL 2016 FIA T ® 500L.
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc. used in substitution therefor e. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION . .............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .................................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ....
.
INTRODUCTION CONTENTS 䡵 INTRODUCTION ........................ 4 䡵 HOW TO USE THIS MANUAL .............. 5 䡵 W ARNINGS AND CAUTIONS ..............
INTRODUCTION Congratulations on selecting your new vehicle. Be as- sured that it repr esents precision workmanship, distinc- tive styling, and high quality - all essentials that are traditional to our vehicles.
HOW TO USE THIS MANUAL Consult the T able of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment.
6 INTRODUCTION.
W ARNINGS AND CAUTIONS This Owner ’s Manual contains W ARNINGS against operating procedur es that could result in a collision, bodily injury and/or death. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner ’s Manual, you may miss important information.
NOTE: It is illegal to remove or alter the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A WORD ABOUT YOUR KEYS ............. 1 1 ▫ Ignition Switch ........................ 1 1 ▫ Locking Doors W ith A Key ................ 1 3 ▫ Key-In-Ignition Reminder ................ 1 3 䡵 SENTR Y KEY .
䡵 DOOR LOCKS ......................... 2 1 ▫ Doors Lock W ith One Or More Doors Open . . .24 ▫ Auto — Relocking (Only For Rear Doors) ..... 2 4 ▫ Child-Protection Door Lock System — Rear Doors .............................. 2 4 ▫ T o Engage Or Disengage The Child-Protection Door Lock System .
A WORD ABOUT YOUR KEYS The Key Fob contains the Remote Keyless Entry (RKE) transmitter with an integrated key . T o use the mechanical key simply push the mechanical key release button. NOTE: The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks.
The ignition switch is fitted with a safety system that requires the ignition key to be turned back to STOP if the engine does not start, before the starting operation can be repeated.
W ARNING! (Continued) • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death.. CAUTION! An unlocked vehicle is an invitation. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended.
NOTE: A key which has not been programmed is also considered an invalid key , even if it is cut to fit the ignition switch lock cylinder for that vehicle. If the V ehicle Security Light is on after the key is turned to the ON/RUN position, it indicates that ther e is a problem with the electronics.
2. This device must accept any interference received, including interference that may cause undesir ed op- eration. NOTE: Changes or modifications not expressly approved by the party r esponsible for compliance could void the user ’s authority to operate the equipment.
The activation of the V ehicle Security Alarm is followed by a self-diagnosis stage. If a fault is detected during the self-diagnosis stage, the horn will sound a second time. If the horn sounds a second time, check that all doors, hood and liftgate are closed correctly , then rearm the system.
W e recommend that you activate the Safe Lock device each time you park your car . Activating The Safe Lock Device The Safe Lock device is enabled on all the doors by quickly double-pushing the LOCK button on the RKE transmitter .
REMOTE KEYLESS ENTR Y (RKE) This system allows you to lock or unlock the doors and liftgate from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmit- ter . The RKE transmitter does not need to be pointed at the vehicle to activate the system.
T o Unlock The Doors And Liftgate Push and release the UNLOCK button on the RKE transmitter once to unlock the driver ’s door or twice, within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal.
Replacing The Battery In The Key With Remote Control T o replace the battery , proceed as follows: • Push button A to open the metal insert B; • T urn the screw C to Unlock using a small screwdriv.
General Information The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
Once the doors have been locked with the RKE transmit- ter , it will no longer be possible to unlock them by pressing central LOCK/UNLOCK button. NOTE: W ith central locking active (LED ON), opening one of the front doors, it is possible to perform a central unlocking (LED OFF).
W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • For personal security and safety in the event of a collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Doors Lock With One Or More Doors Open It is possible locking the vehicle thr ough the RKE, internal button or external key pawl, also if one or more doors are open.
W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged (locked).
NOTE: The power window switches will remain active for up to three minutes after the ignition switch is cycled to the OFF position. Opening either front door will cancel this feature. W ARNING! Never leave children unattended in a vehicle, and do not let children play with power windows.
NOTE: • If the window runs into any obstacle during auto- closure, it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window . • Any impact due to rough road conditions may trigger the auto-reverse function unexpectedly during auto- closure.
.
Liftgate Emergency Release As a security measure, a Liftgate Emergency Release is built into the liftgate latching mechanism. T o access the Liftgate Emergency Release proceed as follows: 1. Remove the rear headrests and fold down the seats completely 2.
4. Introduce the screwdriver into the seat B in order to trigger the r elease tab of the tr unk (follow the dir ection arrow to open) OCCUP ANT RESTRAINT SYSTEMS Some of the most important safety feat.
2. If a child from 2 to 12 years old (not in a rear-facing child restraint) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restraint.
W ARNING! • Never place a rear-facing child restraint in front of an air bag. A deploying Passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger , including a child in a rear- facing child restraint. • Only use a rear-facing child restraint in a vehicle with a rear seat.
Initial Indication If the driver is unbuckled when the ignition switch is first turned to the A VV/ST ART or MAR/RUN position, a chime will signal for a few seconds.
Change Of Status If the driver or outboard front seat passenger (if equipped with outboard front passenger seat BeltAlert) unbuckles their seat belt while the vehicle is traveling, the BeltAlert warning sequence will begin until the seat belts are buckled again.
W ARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly . In some collisions, the air bags won’t deploy at all. Always wear your seat belt even though you have air bags.
W ARNING! (Continued) • A lap belt worn too high can increase the risk of injury in a collision. The seat belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap part of your seat belt as low as possible and keep it snug.
W ARNING! (Continued) • A frayed or torn seat belt could rip apart in a collision and leave you with no protection. Inspect the seat belt system periodically , checking for cuts, frays, or loose parts. Damaged parts must be re- placed immediately . Do not disassemble or modify the seat belt system.
4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
6. T o release the belt, push the red button on the buckle. The seat belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the seat belt to retract fully . Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt.
Position the lap belt snug and low below the abdomen and acr oss the str ong bones of the hips. Place the shoulder belt acr oss the chest and away from the neck.
For additional information, refer to “Installing Child Restraints Using The V ehicle Seat Belt” under the “Child Restraints” section of this manual.
W ARNING! • Never place a rear-facing child restraint in front of an air bag. A deploying Passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger , including a child in a rear- facing child restraint. • Only use a rear-facing child restraint in a vehicle with a rear seat.
W ARNING! (Continued) only used to install rear-facing or forward-facing child restraints that have a harness for restraining the child. Supplemental Restraint System (SRS) Air Bag System Components Y.
.
Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags. This system pr ovides output appr opriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact sensors or other system components.
W ARNING! (Continued) • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly . In some collisions, air bags won’t deploy at all. Al- ways wear your seat belts even though you have air bags.
The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The Advanced Front Air Bags fully inflate in less time than it takes to blink your eyes. The air bags then quickly deflate while helping to restrain the driver and front passenger .
The SABs may help to reduce the risk of occupant injury during certain side impacts and/or vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and body structure. When the SAB deploys, it opens the seam on the out- board side of the seatback’s trim cover .
2. Supplemental Side Air Bag Inflatable Curtains (SABICs) are located above the side windows. The trim covering the SABICs is labeled “SRS AIRBAG” or “AIRBAG.
W ARNING! • Y our vehicle is equipped with left and right Supplemental Side Air Bag Inflatable Curtains (SABICs). Do not stack luggage or other cargo up high enough to block the deployment of the SABICs. The trim covering above the side win- dows where the SABIC and its deployment path are located should remain free from any obstruc- tions.
Seat belts (and child restraints where appropriate) are necessary for your protection in all collisions. They also help keep you in position, away from inflating Side Air Bags. T o get the best protection from the Side Air Bags, occupants must wear their seat belts properly and sit upright with their backs against the seats.
Side Impacts In side impacts, the side impact sensors aid the ORC in determining the appr opriate r esponse to impact events. The system is calibrated to deploy the Side Air Bags on the impact side of the vehicle during impacts that r equire Side Air Bag occupant protection.
If A Deployment Occurs The Advanced Front Air Bags are designed to deflate immediately after deployment. NOTE: Fr ont and/or side air bags will not deploy in all collisions.
W ARNING! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the seat belt retractor assemblies replaced by an authorized dealer imme- diately . Also, have the Occupant Restraint Controller System serviced as well.
Enhanced Accident Response System Reset Procedure After the event occurs, when the system is active, a message regarding fuel cutoff is displayed. T urn the ignition switch from ignition A VV/ST AR T or MAR/ ACC/ON/RUN to ignition STOP/OFF/LOCK.
Customer Action Customer W ill See 6. T urn Left T urn Signal Switch ON. Left T urn Light Is ON SOLID. Right T urn Light Is ON SOLID. 7. T urn Left T urn Signal Switch OFF . (T urn Signal Switch Must Be Placed In Neutral State). Left T urn light Is OFF .
the MAR/ACC/ON/RUN position. After the self-check, the Air Bag W arning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Air Bag W arning Light, either momentarily or continuously . A single chime will sound to alert you if the light comes on again after initial startup.
Maintaining Y our Air Bag System W ARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. Y ou could be injured if the air bag system is not there to protect you.
Event Data Recorder (EDR) This vehicle is equipped with an event data recor der (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems per- formed.
Child Restraints Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every state in the United States, and every Canadian province, requir es that small children ride in proper restraint systems. This is the law , and you can be pros- ecuted for ignoring it.
NOTE: • For additional information, refer to www .seatcheck.org or call 1-866-732-8243. • Canadian residents should refer to T ransport Canada’s website for additional information: www .tc.gc.ca/eng/ motorvehiclesafety/safedrivers-childsafety-index-53.
Child Size, Height, W eight Or Age Recommended T ype Of Child Restraint Children T oo Large for Child Restraints Children 12 years old or younger , who have out-grown the height or weight limit of the.
Older Children And Child Restraints Children who are two years old or who have outgrown their rear -facing convertible child seat can ride forward- facing in the vehicle.
Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
Recommendations For Attaching Child Restraints Restraint T ype Combined W eight of the Child + Child Restraint Use any attachment method shown with an “X” Below LA TCH – Lower Anchors Only Seat Belt Only LA TCH – Lower Anchors + T op T ether Anchor Seat Belt + T op T ether Anchor Rear-Facing Child Restraint Up to 65 lbs (29.
Lower Anchors And T ethers For CHildren (LA TCH) Restraint System Y our vehicle is equipped with the child r estraint anchor - age system called LA TCH, which stands for Lower Anchors and T ethers for CHildren. The LA TCH system has three vehicle anchor points for installing LA TCH- equipped child seats.
LA TCH Positions For Installing Child Restraints In This V ehicle • Lower Anchorage Symbol 2 anchorages per seating position • T op T ether Anchorage Symbol 2 THINGS TO KNOW BEFORE ST ARTING YOUR .
What is the weight limit (child’s weight + weight of the child restraint) for using the LA TCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Use the LA TCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.
Can two child restraints be attached using a common lower LA TCH anchorage? No Never “share” a LA TCH anchorage with two or more child restraints. If the center position does not have dedicated LA.
Locating LA TCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They ar e just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the gap between the seatback and seat cushion.
LA TCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear -facing child restraints will also be equipped with a tether strap.
Always follow the directions of the child restraint manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here.
6. T est that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.
Installing Child Restraints Using The V ehicle Seat Belt The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
What is the weight limit (child’s weight + weight of the child restraint) for using the T ether Anchor with the seat belt to attach a forward facing child restraint? W eight limit of the Child Restr.
2. Pull enough of the seat belt webbing from the retractor to pass it through the belt path of the child restraint. Do not twist the belt webbing in the belt path. 3. Slide the latch plate into the buckle until you hear a “click.” 4. Pull on the webbing to make the lap portion tight against the child seat.
Installing Child Restraints Using The T op T ether Anchorage W ARNING! Do not attach a tether strap for a rear-facing car seat to any location in front of the car seat, including the seat frame or a tether anchorage.
4. Remove slack in the tether strap according to the child restraint manufacturer ’s instructions. W ARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not requir ed for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust f.
Air Bag W arning Light The Air Bag warning light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
W ARNING! (Continued) • Never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals. • Check mounting of mats on a regular basis.
Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid (if equipped), or brake fluid leaks are suspected. The cause should be located and corrected immediately .
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS ............................. 8 8 ▫ Inside Day/Night Mirror ................ 8 8 ▫ Automatic Dimming Mirror — If Equipped . . .89 ▫ Conversation Mirror — If Equipped .........
▫ T urn Signals ......................... 1 1 0 ▫ Lane Change Assist .................... 1 1 0 ▫ Follow Me Home/Headlight Delay ......... 1 1 0 ▫ Front Fog Lights — If Equipped ........... 1 1 1 ▫ Interior Lights ....................... 1 1 1 䡵 WINDSHIELD WIPERS AND W ASHERS .
▫ Programming A Rolling Code ............ .133 ▫ Programming A Non-Rolling Code ........ .135 ▫ Canadian/Gate Operator Programming ..... .136 ▫ Using HomeLink ..................... .138 ▫ Security ........................... .138 ▫ T roubleshooting T ips .
MIRRORS Inside Day/Night Mirror A single ball joint mirror is provided in the vehicle. It is a twist on mirr or that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requir es no tools for mounting.
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the feature on or off by pushing the button at the base of the mirr or . A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Conversation Mirror — If Equipped There is a conversation mirror located at the top of the overhead console. T o gain access to the conversation mirror , pull downward on the mirror to the open position. Power Mirrors The power mirror controls are located on the driver ’s door trim panel.
control wand in the direction you want the mirror to move. When you are finished adjusting the mirror , turn the control to the center position to prevent accidentally moving a mirror . Folding Mirrors The exterior mirrors are hinged to allow the mirror to pivot forward or rearward to help avoid damage.
Sun Visors The driver and passenger sun visors are located on the headliner , near the front windshield. The sun visor can be rotated downwar d or up against the door glass.
SEA TS Front Seats Forward/Rearward Adjustment The adjusting bar is located at the front of the seats, near the floor . While sitting in the seat, lift up on the bar and move the seat forward or rearwar d. Release the bar once the desired position is reached.
W ARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Recliner Adjustment The recline lever is located on the outboard side of the seat. T o recline the seat, lean forward slightly , lift the lever , lean back to the desired position and release the lever . T o return the seatback to its normal upright position, lean forward and lift the lever .
Power Lumbar — If Equipped Push the power lumbar switch to adjust the lumbar support. Release the switch when you reach the desired position. Heated Seats — If Equipped On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks.
NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater .
While sitting in the seat, lift up on the bar and move the seat forward or rearwar d. Release the bar once the desired position is reached. Then, using body pressur e, move forward and r earward on the seat to be sur e that the seat adjusters have latched.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Fold And T umble Rear Seat NOTE: • Prior to folding the rear seat, it may be necessary to reposition the front seats.
NOTE: Y ou may experience deformation in the seat cushion from the seat belt buckles if the seats are left folded for an extended period of time. This is normal and by simply opening the seats to the open position, over time the seat cushion will return to its normal shape.
5. Slowly flip the entir e seat rearwar d and firmly lock the seat into position. 6. Raise the rear seatback and firmly lock the seatback into position.
Head Restraints Head r estraints are designed to reduce the risk of injury by restricting head movement in the event of a rear - impact. Head r estraints should be adjusted so that the top of the head restraint is located above the top of your ear .
Reactive Head Restraints — Front Seats The front driver and passenger seats are equipped with Reactive Head Restraints. In the event of a rear impact the Reactive Head Restraints will automatically extend forward minimizing the gap between the back of the occupant’s head and the Reactive Head Restraint.
W ARNING! • A loose head restraint thrown forward in a colli- sion or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment. • ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants.
T o remove the outboar d head r estraints, raise it as far as it can go then push the adjustment button, and the release button at the base of each post while pulling the head restraint up. T o r einstall the head r estraint, put the head restraint posts into the holes and push downwar d.
W ARNING! ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the re-installation instructions above prior to operating the vehicle or occupying a seat. OPENING AND CLOSING THE HOOD T o open the hood, two latches must be released to open the hood.
CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower hood to approximately 12 in (30 cm) and drop the hood to close. Make sure hood is fully closed for both latches. Never drive vehicle unless hood is fully closed, with both latches engaged.
LIGHTS Multifunction Lever The multifunction lever , located on the left side of the steering wheel, controls the operation of the headlights, headlight beam selection, passing light and turn signals. NOTE: The external lights can only be turned on with the ignition in the ON/RUN position.
NOTE: When the headlights are turned on, the Daytime Running Lights will be deactivated. Daytime Running Lights — If Equipped T o activate the Daytime Running Lights (DRL), rotate the end of the multifunction lever to the O symbol. NOTE: The low beams and side/tail lights will not be on with DRL.
Parking Lights T o turn on the parking lights, remove the key or turn the ignition to OFF/LOCK position and turn on the headlights. T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
Deactivation Pull the multifunction lever toward the steering wheel and hold it for more than two seconds. Front Fog Lights — If Equipped The fog light switch is located on the center stack of the instrument panel, just below the radio. Push the switch once to turn the front fog lights on.
Push the switch to the off/left position from its center position and the lights are always off. Leave the switch in the center position, and the lights are turned on and off when the doors ar e opened or closed.
The switches on the left and right sides of the overhead console contr ols the map or reading function of the lights. Push the switch to the right to turn on the right light and push the switch to the left to turn on the left light.
• When the doors are unlocked with the Key Fob a 10 second timer is activated. • When the doors are locked with the Key Fob the lights will turn off. Interior Light T iming (On/Right Position) • When all doors are closed a 15 minute timer is activated.
W indshield Wiper Off This is the normal position of the wiper lever . Intermittent Speed Rotate the end of the lever upward to the first detent. The wipers will operate at intermittent speed. Low Speed Rotate the end of the lever upwar d to the second detent.
CAUTION! • T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • In cold weather , always turn off the wiper switch and allow the wipers to return to the “Park” posi- tion before turning off the engine.
Rear Window Wiper/W asher Activation Rotate the windshield wiper lever center ring upwar ds to operate the rear window wiper as follows: • In intermittent mode when the front windshield wiper is not operating. • In synchronous mode (at half the speed of the front window wiper) when the front windshield wiper is operating.
window wiper as well. Releasing the windshield wiper lever will activate the smart washing function, as de- scribed for the windscreen wiper . Deactivation The function stops when the windshield wiper lever is released. TIL T/TELESCOPING STEERING COLUMN This featur e allows you to tilt the steering column upward or downward.
T o unlock the steering column, pull the control handle down. T o tilt the steering column, move the steering wheel upward or downward as desired. T o lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desir ed.
NOTE: In order to ensure proper operation, the Elec- tronic Speed Contr ol system has been designed to shut down if multiple Speed Contr ol functions are operated at the same time.
W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it.
The drivers pr eferred units can be selected through the instrument panel settings if equipped. Refer to “Under- standing Y our Instrument Panel” for more information. The speed increment shown is dependent on the selected speed unit of U.S. (mph) or Metric (km/h): U.
• If the button is continually pushed, the set speed will continue to decr ease until the button is released, then the new set speed will be established. Metric Speed (km/h) • Pushing the SET (-) button once will result in a 1 km/h decrease in set speed.
REAR P ARK ASSIST — IF EQUIPPED The Rear Park Assist system provides an audible indica- tion of the distance between the rear fascia/bumper and a detected obstacle when backing up, e.g. during a parking maneuver . Refer to the “Park Assist System Usage Precautions” for the limitations of this system and recommendations.
Rear Park Assist Audible Alerts If an obstacle is behind the vehicle when the transmission is placed into REVERSE, an audible alert is activated. The tones emitted by the loudspeaker inform the driver that the vehicle is approaching an obstacle. The pauses between the tones are directly proportional to the dis- tance from the obstacle.
SIGNAL MEANING INDICA TION Failure Sensor or System failur es V isual Signal (instrument panel) • Icon appears on display . • Message is displayed on the Electronic V ehicle Infor- mation Center (EVIC) (where provided). While audible signals are emitted, the audio system is not muted.
The sensors and wiring are tested continuously when the ignition is in the ON/RUN position. Failures are indi- cated immediately if they occur when the system is ON.
• Objects such as bicycle carriers, etc., must not be placed within 12 in (30 cm) from the rear fascia/bumper while driving the vehicle. Failure to do so can result in the system misinterpreting a close object as a sensor prob- lem, causing a failure indication to be displayed in the instrument cluster .
W ARNING! (Continued) could detect the ball mount and hitch ball assem- bly , depending on its size and shape, giving a false indication that an obstacle is behind the vehicle.
When enabled, fixed guide lines are overlaid on the image to illustrate the width of the vehicle. NOTE: The ParkV iew Rear Back Up Camera has pro- grammable modes of operation that may be selected through the Uconnect System. Refer to your Uconnect Supplement Manual for further information.
CAUTION! • T o avoid vehicle damage, ParkV iew should only be used as a parking aid. The ParkV iew camera is unable to view every obstacle or object in your drive path. • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew to be able to stop in time when an obstacle is seen.
NOTE: HomeLink is disabled when the V ehicle Security Alarm is active. Before Y ou Begin Programming HomeLink Be sure that your vehicle is parked outside of the garage before you begin programming.
NOTE: • Erasing all channels should only be performed when programming HomeLink for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or , on the Internet at HomeLink.
2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view . 3. Push and hold the HomeLink button you want to program while you push and hold the hand-held transmitter button.
Reprogramming A Single HomeLink Button (Rolling Code) T o repr ogram a channel that has been previously trained, follow these steps: 1. Cycle the ignition to the ON/RUN position. 2. Push and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds.
5. Push and hold the programmed HomeLink button and observe the indicator light. • If the indicator light stays on constantly , program- ming is complete and the garage door/device should activate when the HomeLink button is pushed. • T o program the two remaining HomeLink buttons, repeat each step for each r emaining button.
1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view .
Reprogramming A Single HomeLink Button (Canadian/Gate Operator) T o repr ogram a channel that has been previously trained, follow these steps: 1. Cycle the ignition to the ON/RUN position. 2. Push and hold the desired HomeLink button until the indicator light begins to flash after 20 seconds.
T roubleshooting Tips If you are having trouble programming HomeLink, here are some of the most common solutions: • Replace the battery in the Garage Door Opener hand- held transmitter . • Push the LEARN button on the Garage Door Opener to complete the training for a Rolling Code.
General Information This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle or in a location accessible to children. Occupants, particularly unattended children, can become entrapped by the power sun- roof while operating the power sunroof switch.
T o Open • Pull the power sunroof switch for approximately one second and the sunr oof will stop at the vented posi- tion. Pull the power sunroof switch a second time for approximately one second and release, the sunroof will open fully , then stop automatically .
NOTE: During the automatic opening and closing stages, if the power sun blind switch is pulled again it will stop the blind movement. POWER OUTLETS Passenger Compartment Power Socket The power outlet is located on the central tunnel, in front of the shift lever , between the two cup holders.
CIGAR LIGHTER — IF EQUIPPED This is located on the central tunnel, next to the parking brake lever . T o activate the cigar lighter , push and release the knob. After a few seconds the knob automatically returns to its initial position, and the cigar lighter is ready for use.
CUPHOLDERS For the driver and front passenger , cupholders are lo- cated on the floor console between the front seats. For the rear seat passengers their is one cupholder located in the center armrest (if equipped).
STORAGE Glove Compartment Y our vehicle is equipped with a upper and lower glove compartment which is located on the right side of the instrument panel. Push the latch button upward on the upper glove compartment door to open it. Pull outward on the lower glove compartment latch to open the lower glove compartment.
Front Center Armrest Storage — If Equipped The front center armrest contains a storage compartment. T o open the storage compartment push in the upper release latch on the front of the armrest. Lift upward on the armrest to gain access to the storage area.
The front center armrest can also be lifted up and adjusted in three positions, this is done by pulling up on the armr est, push the latch down to adjust the armrest down.
T ilt of cargo floor The cargo floor can also be arranged at an angle (tilted toward the rear seat backs), in order to facilitate access to the area below the luggage compartment. In this position also the plan guarantees the correct locking of any objects present inside the cargo area, avoiding that they move in the event of sudden braking.
CAUTION! The dimension of the cargo floor permit a maximum capacity of a distributed weight of 154 lbs (70kg) (if positioned at threshold level) or 88 lbs (40 kg) (if positioned at raised level) do not add objects with a higher weight. Access to double load compartment T o access the double load compartment, proceed as follows: 1.
3. Then reposition the platform correctly in the housings on the side panels and rear crossmember . NOTE: Movements of the load platform must take place in a central position r elative to the luggage compartment.
Moving the load platform T o move the load platform from lower to upper position, proceed as follows: 1. Grip handle and raise the platform, holding it with one hand.
Securing Y our Load There ar e two tie downs inside the luggage compartment for attaching cables which can secure the load carried. A further two tie downs located on the r ear cr ossmember .
T wo hooks are also available on the side panels to fix loads which are not excessively heavy (e.g. bags). T o use the hooks, push the release button. CAUTION! The maximum load admitted per each bag hook is 22 lbs (10 kg). Storage Compartments There are two storage compartments located on the rear side panels.
REAR WINDOW FEA TURES Rear Window Defroster The rear window defroster button is located with the climate controls on the instrument panel. Push this button to turn on the rear window defroster . An indicator in the button will illuminate when the r ear window defroster is on.
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
Distribute car go weight evenly on the r oof rack crossbars. The roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity .
REAR WINDOW FEA TURES Rear Window Defroster The rear window defroster button is located with the climate controls on the instrument panel. Push this button to turn on the rear window defroster . An indicator in the button will illuminate when the r ear window defroster is on.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 INSTRUMENT P ANEL FEA TURES ......... .162 䡵 INSTRUMENT CLUSTER ................ .163 䡵 W ARNING AND INDICA T OR LIGHTS ...... .165 ▫ Red T elltale Indicator Lights ............. .166 ▫ Y ellow T elltale Indicator Lights .
▫ Personal Settings (Customer-Pr ogrammable Features) ........................... .194 䡵 CYBERSECURITY ...................... .208 䡵 UCONNECT SETTINGS ................. .210 ▫ Buttons On The Faceplate ............... .210 ▫ Buttons On The T ouchscreen .
▫ Navigation (6.5N) .................... .256 ▫ V oice T ext Reply ..................... .257 ▫ General Information ................... .258 ▫ Additional Information .
INSTRUMENT P ANEL FEA TURES 1 — Side V ent 7 — Fixed Upper Air V ent 13 — Climate Controls 2 — Steering Wheel Audio Control — Lo- cated On Back Side Of Steering Wheel 8 — Passenger Advance.
INSTRUMENT CLUSTER EVIC Instrument Cluster 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 163.
1. Speedometer • Indicates vehicle speed 2. Fuel Gauge • The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position 3.
4. T achometer • Indicates the engine speed in revolutions per minute (RPM x 1000). 5. Electronic V ehicle Information Center (EVIC) • When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages.
Red T elltale Indicator Lights Brake W arning Light Red T elltale Light What It Means United States Canada Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application.
The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake W arning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied.
Seat Belt Reminder W arning Light Red T elltale Light What It Means Seat Belt Reminder W arning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound.
Air Bag W arning Light Red T elltale Light What It Means Air Bag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN.
Oil Pressure W arning Light Red T elltale Light What It Means Oil Pressure W arning Light This light indicates low engine oil pressur e. If the light turns on while driving, stop the ve- hicle and shut off the engine as soon as possible. A chime will sound when this light turns on.
Electronic Throttle Control (ETC) W arning Light Red T elltale Light What It Means Electronic Throttle Control (ETC) W arning Light This light informs you of a problem with the Electronic Throttle Contr ol (ETC) system.
Anti-Lock Brake (ABS) Indicator Light Y ellow T elltale Light What It Means Anti-Lock Brake (ABS) Indicator Light After the ignition is turned on, the Anti-Lock Brake System (ABS) light illuminates to indi- cate function check at vehicle startup.
Y ellow T elltale Indicator Lights Electronic Stability Control (ESC) Activation / Malfunction Indicator Light Y ellow T elltale Light What It Means Electronic Stability Control (ESC) Indicator Light .
Electronic Stability Control (ESC) OFF Indicator Light Y ellow T elltale Light What It Means Electronic Stability Control (ESC) OFF Indicator Light This light indicates the Electronic Stability Control (ESC) is off.
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the (Continued) CAUTION! (Continued) heating elements.
Passenger Air Bag Indicator Light Y ellow T elltale Light What It Means Passenger Air Bag Indicator Light This light should come and remain on for four to eight seconds as a bulb check when the ignition is first turned to the ST ART or ON/RUN position.
Engine Check/Malfunction Indicator Light (MIL) Y ellow T elltale Light What It Means Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems.
CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur .
T ire Pressure Monitoring Indicator Light Y ellow T elltale Light What It Means T ire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring.
one or more of your tires is significantly under-inflated. Accordingly , when the low tire pr essure telltale illumi- nates, you should stop and check your tires as soon as possible and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle.
Glow Plug Light — If Equipped Y ellow T elltale Light What It Means Glow Plug Light — If Equipped This vehicle will inhibit engine cranking when the ambient temperature is less than –22° F (–30° C) and the oil temperature sensor reading indicates an engine block heater has not been used.
Green T elltale Indicator Lights T urn Signal Indicator Lights Green T ell- tale Light What It Means T urn Signal Indicator Lights The instrument cluster dir ectional arrow will flash independently fo.
Park/Headlight ON Indicator Light Green T elltale Light What It Means Park/Headlight ON Indicator Light This indicator will illuminate when the park lights or headlights are turned on.
Blue T elltale Indicator Lights High Beam Indicator Light Blue T elltale Light What It Means High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam.
EVIC Screen The EVIC will display the following: • T ime • Date or trip distance display in miles or kilometers • Outside temperature • Gear Indicator • Odometer (display of distance travelled in miles/ kilometers) • Car status indication (e.
Electronic V ehicle Information Center (EVIC) Setup Menu The menu comprises a series of functions arranged in a cycle. The menu includes the following functions: NOTE: Some of the Menu Items could be managed by Uconnect (if equipped). In that case, some of these are not present in EVIC but in Uconnect.
• T ire Reset • City Brake Control • Selecting An Option Of The Main Menu Without Submenu Briefly push and release the MENU button to select the main menu option to set. Push and release the UP or DOWN button (by single pushes) to select the new setting.
Change Engine Oil Indicator System Y our vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval.
• A short button push displays the different values. • A long button push resets the system and then starts a new trip. New T rip T o reset: • Push and hold the TRIP button to reset the system manually . • When the “T rip distance” reaches 99999.
Start Of T rip Procedure W ith the ignition on, push and hold the TRIP button for over one second to reset. Exit T rip T o exit the T rip function, wait until all the values have been displayed or hold the MENU button for longer than one second.
V alues Displayed Range This indicates the distance which may be traveled with the fuel remaining in the tank, assuming that driving conditions will not change. The message “----” will appear on the display in the following cases: • Distance less than 30 miles (or 50 km).
Personal Settings (Customer-Programmable Features) Dimmer NOTE: The brightness of IPC will change automatically only if the External light has changed: External light On= Night Mode, External Light OFF= Day Mode. In both case (Day or Night) is possible to adjust the display brightness as described in step 1 below .
NOTE: Selection is possible between 20 – 125 mph or (32 – 201 km/h), depending on the selected unit. The setting will increase/decr ease by five units each time the UP/DOWN button is pushed. Push and hold the UP/ DOWN button to incr ease/decrease the setting rapidly .
Proceed as follows to set: • Push MENU button briefly . The level set previously flashes on the display; • Push the UP or DOWN button to make the adjust- ment; • Push the MENU button briefly to return to the menu screen or hold the button down to return to the standard screen without storing.
T rip B Data (T rip B On) Through this option, it is possible to activate (On) or deactivate (Off) the T rip B (partial trip) display . For further information, see “T rip Computer .” For activation / deactivation, proceed as follows: 1. Briefly push and release the MENU button.
2. Push and release the UP or DOWN button to navigate the two sub-menu items. 3. Select the required option and then push and release the MENU button. 4. When accessing the “T ime” sub-menu item, briefly push and release the MENU button and “hours” will flash on the display .
When you have selected the requir ed settings, briefly push and release the MENU button to go back to the T ime, Mode sub-menu scr een, or push and hold the MENU button (approximately one second) to go back to the main screen without storing the settings.
First Page (Display Of Information On The Main Screen) This function allows you to choose the information you would like to see on the main screen. Y ou can view the date or the trip distance. T o make your choice, proceed as follows: • Briefly push the MENU button.
W ith this function active, the EVIC display shows infor- mation relevant to the sound system. • Radio: tuned radio station frequency , automatic tuning activation or AutoStore. • CD audio, CD MP3: track number . T o activate (On) or to deactivate (Off) the sound system info displaying, proceed as follows: 1.
3. Briefly push and release the MENU button to go back to the menu screen, or push and hold the MENU button (approximately one second) to go back to the main screen without storing the settings.
If the distance unit set is “km,” the fuel economy unit will be displayed in either km/l or l/100km. 1. Push and release the UP or DOWN button for setting. 2. Briefly push and release the MENU button to return to the sub-menu. 3. When accessing the “T emperature” submenu: briefly push and release the MENU button.
button (approximately one second) to go back to the main screen without storing the settings. Buzzer V olume (Adjusting The Failure/W arning Buzzer V olume) W ith this function the volume of the buzzer accompany- ing any failure/warning indication can be adjusted to one of eight volume levels.
Service (Scheduled Servicing) This function allows you to display the information about km/mileage intervals or , for versions/markets, where provided, time intervals for car servicing.
Proceed as follows: • Push the MENU button and, after the message ⬙ Bag pass: Off ⬙ (to deactivate) or ⬙ Bag pass: On ⬙ (to activate) is displayed by pushing UP and DOWN buttons, push the ME.
Hill Start Assist This function is used when starting a vehicle from a stop on a hill. Hill Start Assist maintains the same level of brake pressur e the driver applied for a short period of time after the foot has been removed from the brake pedal. Proceed as follows to switch this function on or off: 1.
When the system is deactivated, the dedicated warning light in the instrument panel switches on. T ire Reset W ith this function, it is possible to reset the TPMS. T o reset, proceed as follows: • Briefly push the MENU button. The display will show Reset.
Y our vehicle may be equipped with certain security features to reduce the risk of unauthorized and unlawful access to vehicle systems and wireless communications. V ehicle software technology continues to evolve over time and FCA US LLC, working with its suppliers, evaluates and takes appropriate steps as needed.
NOTE: • FCA or your dealer may contact you dir ectly regar ding software updates. • T o help further impr ove vehicle security and minimize the potential risk of a security breach, vehicle owners should: • Routinely check www .driveuconnect.com/softwar e- update to learn about available Uconnect software updates.
Push the Display Off button on the faceplate to turn off the Uconnect screen. Push the Display Off button on the faceplate a second time to turn the screen on. Push the Back Arrow button on the faceplate to exit out of a Menu or certain option on the Uconnect system.
Display After pressing the “Display” button on the touchscreen the following settings will be available: • Display Mode This feature will allow you to select one of the auto display settings. T o change Mode status, press and re- lease the “Auto” or “Manual” button on the touchscreen.
• T ouchscreen Beep When in this display , you may turn on or shut off the sound heard when a touchscreen button (button on the touchscreen) is pressed. Press the “T ouchscreen Beep” button on the touchscreen. Press the “On” or “Off” button on the touchscreen to turn the T ouchscreen Beep ON or OFF .
Set to: “MPG” (US). • Pressur e Set to: “psi.” • T emperature Set to: “°F .” Metric • Distance Set to: “km.” • Fuel Consumption Set to: “L/100 km.” • Pressur e Set to: “bar .” • T emperature Set to: “°C.” Custom Units can be customized independently from: • Distance Select from: “mi” or “km.
V oice • V oice Response Length When in this display , you may change the V oice Response Length settings. T o change the V oice Response Length, press the “Brief” or “Long” button on the touchscreen. • Show Command List When in this display , you may change the Show Com- mand List settings.
• T ime Format This feature will allow you to select the time format display setting. Press the “T ime Format” button on the touchscreen. Press the “12hrs” or “24hrs” button on the touchscreen. • Show T ime In Status Bar — If Equipped This feature will allow you to turn on or shut off the digital clock in the status bar .
the outside mirrors. When Lights & Chime mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the outside mirrors as well as an audible alert when the turn signal is on. When Off is selected, the Blind Spot Monitor (BSM) system is deactivated.
• Greeting Lights When this feature is selected, it allows the greeting lights to be turned On or Off. T o change the Greeting Lights setting, press the “On” or “Off” button on the touchscreen to select your desired Greeting Light setting.
• Auto Dim High Beams — If Equipped When this feature is selected, the high beam headlights will deactivate automatically under certain conditions. T o make your selection, press the “Auto High Beams” button on the touchscreen, then choose “Y es” or “No.
Exit” button on the touchscreen, then choose “Y es” or “No.” The button will highlight indicating that the set- ting has been selected. • Flash Headlights With Lock When this feature is selected, the exterior lights will flash when the doors are locked with the Remote Keyless Entry (RKE) transmitter .
NOTE: If the vehicle is programmed 1st Pr ess Of Key Fob Unlocks, all doors will unlock no matter which Passive Entry equipped door handle is grasped. If 1st Pr ess Of Key Fob Unlocks is programmed, only the driver ’s door will unlock when the driver ’s door is grasped.
Auto Comfort Systems — If Equipped After pressing the “Auto-On Comfort & Remote Start” button on the touchscreen the following settings will be available: • Horn With Remote Start When this feature is selected, the horn will sound when the remote start is activated.
• Engine Of f Power Delay When this feature is selected, the power window switches, radio, Uconnect Phone system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will r emain active for up to 10 minutes after the ignition is cycled to OFF .
• Equalizer When in this display you may adjust the Bass, Mid and T reble settings. Adjust the settings with the “+” and “–” buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the touchscreen.
Phone/Bluetooth W ARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws. Y our attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.
W rite down the SIRIUS ID numbers for your receiver . T o reactivate your service, either call the number listed on the screen or visit the provider online. NOTE: SiriusXM T ravel Link is a separate subscription and is available for U.S. residents only .
Refer to the Uconnect 5.0/6.5 User’s Manual for iPod and external USB support capability . STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located at the rear of the steering wheel.
The right-hand control is a rocker -type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pushing the top of the rocker switch will increase the volume, and pushing the bottom of the rocker switch will decrease the volume.
CD/DVD DISC MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc.
CLIMA TE CONTROLS Manual Climate Control System Controls The Manual Climate controls consist of a series of rotary dials, an inner push knob and two push buttons. 1. T emperature Control Rotate this control to r egulate the temperature of the air inside the passenger compartment.
NOTE: • Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur . Extended use of this mode is not recommended. • The use of the Recirculation mode in cold or damp weather could cause windows to fog on the inside, because of moisture buildup inside the vehicle.
6. Mode Control Rotate this contr ol to change the system between Modes (Panel, Bi-Level, Floor , Mix, Defrost). • Panel Air is directed through the outlets in the instrument panel.
Rear W indow Defrosting Push and release the rear window defr ost button to turn the function on/off. The activation of the function is indicated by the rear defrost warning light on the instrument panel switching on. The function is automatically deactivated after 20 minutes.
Air Distribution Selection Rotate the Mode Contr ol knob to manually select one of the five possible air distribution settings in the passenger compartment: Air flow to the fr ont windshield, front side win- dow and front/r ear footwell diffusers. Air flow to the front/r ear footwell diffusers.
• fan speed set to 1st speed; • T emperature Control knob turned completely clock- wise to red section. The heater is switched off when at least one of the conditions above is no longer verified. NOTE: The power of the electric heater is modulated according to the battery voltage.
1. Driver T emperature Control Provides the driver with independent temperature con- trol. Rotate adjustment knob to set desired temperature. NOTE: In Sync mode, this button will also automatically adjust the passenger temperature setting at the same time.
6. Blower Control Blower control is used to r egulate the amount of air forced through the climate system. Adjusting the blower will cause automatic mode to switch to manual opera- tion. The speeds can be selected by rotating the Blower Control adjustment knob.
1 1. SYNC Button Push the Sync button to toggle the Sync featur e ON/OFF . The Sync indicator is illuminated when this feature is enabled. Sync is used to synchr onize the passenger temperature setting with the driver temperature setting. Changing the passenger temperature setting while in Sync will automatically exit this feature.
All these functions can be adjusted manually by operat- ing the system, selecting one or more functions and modifying their parameters. Automatic contr ol of the functions will be suspended: the system will only override the settings for safety reasons.
NOTE: The climate control system detects the passenger compartment temperature using a mean radiant tem- perature sensor located in the interior r ear view mirror and protected by a specific cover . Obstructing the field of view of this sensor with any object could cause the climate contr ol system to operate with less than optimal efficiency .
Adjusting The Air T emperature Rotate the Driver T emperature Control, or the Passenger T emperature Control, dial clockwise or anti clockwise, to adjust the air temperature in the front left (Driver T em- perature Control) or right (Passenger T emperature Con- trol) zone of the passenger compartment.
• Down Arrow – Air flow to the front and r ear footwell diffusers. This air distribution setting heats the passen- ger compartment most quickly , giving a prompt sen- sation of warmth. • Right/Down Arrows – Air flow distributed between footwell diffusers (hotter air) and central and side dashboard vents (cooler air).
T o restore automatic control of the air distribution after a manual selection, push the AUTO button. AUTO Button When the AUTO button is pushed (LED on button lit) the climate control system automati.
SYNC Button Push the SYNC button (LED on button lit) to align the passenger side air temperature with that of the driver side. This function makes temperature regulation easier when the driver is travelling alone. T urn the Passenger T emperature Contr ol knob to set the passenger side temperature and return to separate air temperature management.
• It is inadvisable to use internal air recirculation when the outside temperature is low , since the windows could mist up rapidly Climate Control System Compressor Push the A/C Control button to activate/deactivate the compressor (activation is indicated by the LED on the button switching on).
• directs air flow to windshield and front side window diffusers; • activates the heated rear window; • activates the heated windshield (if equipped); • displays the fan speed (Blower Control Indicator LED lit).
If equipped, push the rear defrost button to activate defrosting of door mirrors and heated rear window . NOTE: Do not affix stickers to the inside of the heated rear window over the heating filaments, to avoid damage that might cause them to stop working properly .
UCONNECT VOICE RECOGNITION QUICK TIPS Introducing Uconnect Start using Uconnect V oice Recognition with these help- ful quick tips. It provides the key V oice Commands and tips you need to know to control your Uconnect 5.0 or 6.5N system. Key Features: • 5.
Key Features: • 6.5-inch Color T ouchscreen Display with AM/FM/ USB/SD Card/Bluetooth • Bluetooth with integrated voice control • GPS navigation (if equipped) Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel.
Basic V oice Commands The basic V oice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say ѧ • Cancel to stop a current voice session. • Help to hear a list of suggested V oice Commands.
Uconnect 5.0 Uconnect 6.5N 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 251.
Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear . (Subscrip- tion or included SiriusXM Satellite Radio trial r equired.) Push the VR button . After the beep, say ѧ • T une to ninety-five-point-five FM.
Media Uconnect offers connections via USB Port, Bluetooth and Auxiliary Ports (If Equipped). V oice operation is only available for connected USB and iPod devices.
TIP: Press the Br owse button on the touchscreen to see all of the music on your iPod or USB device. Y our V oice Command must match exactly how the artist, album, song and genre information is displayed. Phone Making and answering hands-free phone calls is easy with Uconnect.
Push the Phone button . After the beep, say one of the following commands ѧ • Call John Smith. • Dial 123-456-7890 and follow the system prompts. • Redial (call previous outgoing phone number). • Call back (call previous incoming phone number).
Navigation (6.5N) The Uconnect navigation featur e helps you save time and become more productive when you know exactly how to get to where you want to go. 1. T o enter a destination, push the VR button . After the beep, say: “Navigate to 800 Chrysler Drive Auburn Hills, Michigan.
V oice T ext Reply Uconnect will announce incoming text messages. Push the Phone button and say “Listen.” (Must have compatible mobile phone paired to Uconnect system.) 1. Once an incoming text message is r ead to you, push the Phone button . After the beep, say: “Reply .
PRE-DEFINED VOICE TEXT REPL Y RESPONSES Y es. Stuck in T raffic. See you later . No. Start without me. I’ll be Late. Okay . Where are you? I will be <number> minutes late. Call me. Are you there yet? I’ll call you later . I need directions. See you in <number> of minutes.
Additional Information © 2015 FCA US LLC. All rights reserved. Mopar and Uconnect are register ed trademarks and Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.
.
ST ARTING AND OPERA TING CONTENTS 䡵 ST ARTING PROCEDURES ............... .265 ▫ Manual T ransmission — If Equipped ...... .265 ▫ Automatic T ransmission — If Equipped .... .265 ▫ Normal Starting ...................... .265 ▫ Cold W eather Operation .
䡵 DRIVING ON SLIPPER Y SURF ACES ........ .290 ▫ Acceleration ........................ .290 ▫ T raction ........................... .291 䡵 DRIVING THROUGH W A TER ............ .291 ▫ Flowing/Rising W ater ................. .292 ▫ Shallow Standing W ater .
▫ T ire Inflation Pr essures ................ .319 ▫ T ire Pr essures For High Speed Operation . . . .320 ▫ Radial Ply T ires ..................... .320 ▫ T ire T ypes .......................... .321 ▫ Run Flat T ires — If Equipped .......
䡵 TRAILER TOWING .................... .343 䡵 RECREA TIONAL T OWING (BEHIND MOTORHOME, ETC.) .................. .344 ▫ T owing This V ehicle Behind Another V ehicle .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
T urn the ignition switch to the A VV/ACC (ST AR T) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the STOP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
3. If the engine fails to start within ten seconds, cycle the ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the Extended Park Starting procedur e. 4. If the engine fails to start after eight attempts, allow the starter to cool for at least 10 minutes, then repeat the procedur e.
CAUTION! (Continued) • T o prevent damage to the starter , do not continu- ously crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After Starting The idle speed is controlled automatically and it will decrease as the engine warms up.
Use each gear in numerical order , do not skip a gear . Be sure the transmission is in first gear , (not third), when starting from a standing position. Damage to the clutch can result from starting in third. For most city driving you will find it easier to use only the lower gears.
Downshifting Proper downshifting will improve fuel economy and prolong engine life. CAUTION! If you skip a gear while downshifting or downshift at too high of a vehicle speed, these conditions may cause the engine to overspeed if too low of a gear is selected and the clutch pedal is released.
W ARNING! • It is dangerous to shift out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requires the transmission to be in P ARK before the ignition switch can be turned to the LOCK/ OFF (key removal) position.
This transmission is programmed to prevent shifting from REVERSE to DRIVE or DRIVE to REVERSE, if vehicle speed is above 6 mph (10 km/h). This safety feature helps protect your transmission from damage. Only shift from DRIVE to P ARK or REVERSE when the accelerator pedal is released and the vehicle is stopped.
NOTE: If the gear selector cannot be moved to the P ARK, REVERSE, or NEUTRAL position (when pushed for- ward) it is probably in the AutoStick (+/-) position (beside the DRIVE position). In AutoStick mode, the transmission gear (1, 2, 3, etc.) is displayed in the instrument cluster .
W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Y our vehicle could move and injure you and others if it is not in P ARK.
W ARNING! (Continued) number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector . • Do not leave the ignition key in or near the vehicle (or in a location accessible to children).
REVERSE (R) This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL (N) Use this range when the vehicle is standing for pr olonged periods with the engine running. The engine may be started in this range.
T o maximize fuel economy , the Euro T win Clutch Six Speed T ransmission uses a geartrain arrangement similar to a manual transmission. Therefor e, you should become familiar with some of the normal .
During extremely cold temperatures, the transmission will not operate if the oil temperature is -22°F (-30°C) or below . Allow the engine to idle briefly with the transmis- sion in P ARK in order to warm the fluid. Normal operation will resume once the transmission temperatur e has risen to a suitable level.
MESSAGE DESCRIPTION SHIFT TO NEUTRAL – THEN DRIVE OR REVERSE The transmission has shifted itself into NEUTRAL (due to a fault condi- tion, or overheat due to excessive idling when stopped in DRIVE with the brakes released), but the gear selector remains in gear .
MESSAGE DESCRIPTION TRANS. HOT STOP SAFEL Y SHIFT TO P ARK W AIT TO COOL The transmission driving clutch has overheated. Pull over , shift the trans- mission into P ARK, and allow the vehicle to cool until “TRANSMISSION COOL READY TO DRIVE” is displayed.
T ransmission Limp Home Mode T ransmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, T ransmission Limp Home Mode is activated. In this mode, some gears will be unavailable.
Six-Speed Automatic T ransmission (Aisin A W6F25) — If Equipped The transmission gear position display (located in the instrument cluster) indicates the transmission gear range.
Manual shifts can be made using the AutoStick shift control (refer to “AutoStick” in this section for further information). Moving the gear selector into the AutoStick (+/-) position (beside the DRIVE position) activates AutoStick mode, providing manual shift control and displaying the current gear in the instrument cluster (as 1, 2, 3, etc).
When parking on a hill, apply the parking brake before shifting the transmission to P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the gear selector out of P ARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away fr om the curb on an uphill grade.
W ARNING! (Continued) LOCK/OFF (key removal) position, an automatic transmission is locked in P ARK, securing the ve- hicle against unwanted movement. • When leaving the vehicle, always remove the igni- tion key from the vehicle and lock the vehicle.
• W ith brake pedal released, verify that the gear selector will not move out of P ARK. REVERSE (R) This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL (N) Use this range when the vehicle is standing for pr olonged periods with the engine running.
range of torque converter clutch engagement. This is done to pr event transmission damage due to overheat- ing. During cold temperatures, transmission operation may be modified depending on engine coolant temperature. Normal operation will r esume once the engine tempera- ture has risen to a suitable level.
If the transmission cannot be reset, authorized dealer service is requir ed. AUTOSTICK AutoStick is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle. AutoStick allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance.
• If a requested downshift would cause the engine to over-speed, that shift will not occur . • The system will ignore attempts to upshift at too low of a vehicle speed. • A void using speed control when AutoStick is engaged because the transmission will not shift automatically .
W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. Y ou could lose control of the vehicle and possibly have a collision. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.
Flowing/Rising W ater W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly .
CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water .
P ARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave manual transmission in REVERSE or first gear . The parking brake lever is located in the center console. T o apply the parking brake, pull the lever up as firmly as possible.
When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle.
BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still func- tion.
The system’s pump motor runs during an ABS stop to provide regulated hydraulic pressure. The pump motor makes a low humming noise during operation, which is normal. The ABS includes an amber ABS W arning Light. When the light is illuminated, the ABS is not functioning.
Engagement of the ABS may be accompanied by a pulsing sensation. Y ou may also hear a clicking noise. These occurrences ar e normal and indicate that the system is functioning properly . Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers.
T raction Control System (TCS) The T raction Control System (TCS) monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide en- hanced acceleration and stability .
• Gear selection matches vehicle uphill direction (i.e., vehicle in NEUTRAL (manual transmission), vehicle facing uphill is in forward gear; vehicle backing uphill is in REVERSE gear).
Electronic Stability Control (ESC) This system enhances dir ectional control and stability of the vehicle under various driving conditions. ESC cor- rects for oversteering or understeering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the oversteering or understeering condi- tion.
W ARNING! (Continued) • V ehicle modifications, or failure to properly main- tain your vehicle, may change the handling charac- teristics of your vehicle, and may negatively affect the performance of the ESC system. Changes to the steering system, suspension, braking system, tire type and size or wheel size may adversely affect ESC performance.
The ESC Activation/Malfunction Indicator Light also flashes when TCS is active. If the ESC Activation/ Malfunction Indicator Light begins to flash during accel- eration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
“ESC OFF” button and the “ESC Activation/Malfunction Indicator Light” will turn of f. This will restore the normal “ESC On” mode of operation.
Electronic Roll Mitigation (ERM) This system anticipates the potential for wheel lift by monitoring the driver ’s steering wheel input and the speed of the vehicle.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) — Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall pr eceding the size designa- tion. Example: P215/65R15 95H. • European — Metric tir e sizing is based on European design standards.
• T emporary spare tires are designed for temporary emergency use only . T emporary high pressur e com- pact spare tires have the letter “T” or “S” molded into the sidewall pr eceding the size designation. Example: T145/80D18 103M. • High flotation tire sizing is based on U.
EXAMPLE: 65, 85, 80 = Aspect ratio in percent (%) – Ratio of section height to section width of tire, or 10.5 = Section width in inches (in) R = Construction code – ⬙ R ⬙ means radial construc.
EXAMPLE: H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tir e.
EXAMPLE: DOT MA L9 ABCD 0301 01 = Number repr esenting the year in which the tire was manufactured (two digits) – 01 means the year 2001 – Prior to July 2000, tire manufacturers were only r equired to have one number to repr esent the year in which the tire was manufactured.
T erm Definition Maximum Inflation Pressure The maximum inflation pressur e is the maximum permissible cold tire inflation pressure for this tir e. The maximum inflation pressur e is molded into the sidewall. Recommended Cold T ire Inflation Pressure V ehicle manufacturer’s recommended cold tire inflation pressur e as shown on the tire placard.
Tire Loading And Tire Pressure T ire And Loading Information Placard Location NOTE: The pr oper cold tire inflation pressure is listed on the driver ’s side B-Pillar or the rear edge of the driver’s side door .
T ire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. T otal weight your vehicle can carry . 3. T ire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear , and spare tires.
T o determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the T ire and Loading Information placard.
vehicle with varying seating configurations and num- ber and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle. • For the following example, the combined weight of occupants and cargo should never exceed 865 lbs (392 kg).
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure.
Tire Inflation Pressures The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or rear edge of the driver’s side door . At least once a month: • Check and adjust tire pr essure with a good quality pocket-type pressur e gauge.
inflation pressur e should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. T ire pressur e may increase from 2 to 6 psi (13 to 40 kPa) during operation. DO NOT reduce this normal pressur e build up or your tire pressure will be too low .
T ire Repair If your tire becomes damaged, it may be repair ed if it meets the following criteria: • The tire has not been driven on when flat. • The damage is only on the tr ead section of your tir e (sidewall damage is not repairable). • The puncture is no greater tha na¼o fa n inch (6 mm).
Summer tir es do not contain the all season designation or mountain/snowflake symbol on the tire sidewall. Use Summer tir es only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. W ARNING! Do not use Summer tires in snow/ice conditions.
Run Flat Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a rapid loss of inflation pressur e. This rapid loss of inflation is referred to as the Run Flat mode. A Run Flat mode occurs when the tir e inflation pr essure is of/or below 14 psi (96 kPa).
rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended tire rotation pattern. Compact Spare T ire — If Equipped The compact spare is for temporary emergency use only .
Full Size Spare — If Equipped The full size spare is for temporary emergency use only . This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping. Refer to “Freeing A Stuck V ehicle” in “What T o Do In Emergencies” for further information.
These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes a 1/16 of an inch (1.6 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to “Replacement T ires” in this section for further information.
Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and corr ect cold tire inflation pressures. The manufactur er strongly recommends that you use tires equivalent to the originals in size, quality and performance when r eplacement is needed.
W ARNING! (Continued) • Never use a tire with a smaller load index or capacity , other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. Y ou could lose control and have a collision.
CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted traction device clearance be- tween tires and other suspension components, it is important that only traction devices in good condi- tion are used.
These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow and wet traction levels, and contribute to a smooth, quiet ride.
TIRE PRESSURE MONITORING SYSTEM (TPMS) The T ire Pr essure Monitor System (TPMS) will warn the driver of a low tire pressur e based on the vehicle r ecom- mended cold tire pressure. The tire pr essure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.
For example, your vehicle may have a recommended cold (parked for more than three hours) tire pr essure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressur e is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressur e to appr oximately 23 psi (159 kPa).
CAUTION! (Continued) • After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the T ire Pressure Moni- toring Sensor .
NOTE: It is particularly important for you to check the tire pressur e in all of the tires on your vehicle regularly and to maintain the proper pressure. The TPMS consists of the following components: • Receiver Module. • Four T ire Pr essure Monitoring Sensors.
• Installing some form of aftermarket window tinting that affects radio wave signals. • Snow or ice around the wheels or wheel housings. • Using tire chains on the vehicle. • Using wheels/tires not equipped with TPM sensors. NOTE: Y our vehicle may be equipped with a compact spare wheel and tire assembly .
General Information This device complies with Part 15 of the FCC rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interfer ence that may cause undesir ed opera- tion.
Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before consid- ering service for the vehicle. Reformulated Gasoline Many areas of the country requir e the use of cleaner burning gasoline r eferred to as “Reformulated Gasoline”.
Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void or not be covered under New V ehicle Limited W arranty .
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’ s performance: • The use of leaded gasoline is prohibited by Federal law . Using leaded gasoline can impair engine perfor- mance and damage the emissions control system.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
5. Remove the fuel nozzle and close the fuel door . NOTE: A funnel is provided (located in the tool bag or cargo floor area in the r ear cargo area) to open the flapper door to allow for emergency refueling with a gas can.
CAUTION! T o avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. W ARNING! • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. • Never add fuel when the engine is running.
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle T owing Condition Wheels OFF the Ground Manual T ransmis- sion Euro T win Clutch T ransmission Automatic T r.
V ehicles equipped with a manual transmission, or a Euro T win Clutch transmission, may be flat towed (with all four wheels on the ground) at any legal highway speed, for any distance, if the transmission is in NEUTRAL. T o place the Euro T win Clutch transmission in NEU- TRAL, follow the procedur e below: 1.
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 HAZARD W ARNING FLASHERS .......... .349 䡵 IF YOUR ENGINE OVERHEA TS ........... .349 䡵 WHEEL AND TIRE TORQUE SPECIFICA TIONS ..................... .350 ▫ T orque Specifications .................. .350 䡵 TIRE SER VICE KIT .
▫ Euro T win Clutch T ransmission ........... .373 ▫ Automatic (Aisin A W6F25) T ransmission .... .374 䡵 IGNITION KEY REMOV AL OVERRIDE ...... .375 䡵 CAP-LESS FUEL FILL FUNNEL .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the instrument panel below the radio. Push the switch to turn on the Hazard W arning flashers. When the switch is activated, all direc- tional turn signals will flash on and of f to warn oncoming traffic of an emergency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. T urn off the air conditioning and wait until the pointer drops back into the normal range.
**Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. T ighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice.
W ARNING! T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury .
T ire punctures of up to 1/4” (6mm) can be repaired; the kit can be used in all weather conditions. Do not remove the foreign object from the punctured tire, i.e., screw or nail. Remove the T ire Service Kit fr om the vehicle, take it out from the bag and place it near the punctured tire.
W ARNING! (Continued) • T ake care not to allow the contents of T ire Service Kit to come in contact with hair , eyes, or clothing. T ire Service Kit sealant is harmful if inhaled, swallowed, or absorbed through the skin. It causes skin, eye, and respiratory irritation.
W ARNING! T ire Service Kit is not a permanent flat tire repair . Have the tire inspected and repaired or replaced after using T ire Service Kit. Do not exceed 65 mph (1 10 km/h) until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you.
W ARNING! Store the sealant canister in its special compartment, away from sources of heat. Failure to follow this W ARNING may result in sealant canister rupture and serious injury or death. JACKING AND TIRE CHANGING — IF EQUIPPED W ARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
W ARNING! (Continued) • The jack is designed to be used as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only . A void ice or slippery areas.
Spare Tire Removal The spar e tire is stowed in underneath the rear car go area on the outside of the car . 1. Remove the cargo floor to access the winch. 2. Remove the jack handle and use the wrench end to lower the spare tire. 3. When the spare is clear , replace the jack tools.
Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
W ARNING! (Continued) • T urn on the Hazard W arning flasher . • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an Euro T win Clutch T ransmission in P ARK; a manual transmis- sion in REVERSE. • Never start or run the engine with the vehicle on a jack.
3. Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove, the wheel bolts on the wheel with the flat tire. T urn the wheel bolts counter- clockwise one turn while the wheel is still on the ground.
4. Place the jack underneath the lift area that is closest to the flat tire. T urn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange, centering the jack saddle between the locating notches on the sill flange.
W ARNING! • T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury . • T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges.
Spare Tire Stowage Rotate the jack wrench tool on the winch drive nut clockwise (the flat tire must not be connected to the winch) until effort becomes heavy and an audible click is heard indicating the winch is properly stowed. Cover the flat tire with the Emergency Spar e T ire Bag and stow the flat tire into the trunk.
Preparations For Jump-Start The battery in your vehicle is located on the drivers side of the engine compartment. W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON.
3. Remove the protective cover over the r emote positive (+) battery post. T o remove the cover , pull upward on the cover . 4. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF .
Follow these steps to disconnect the negative (-) battery cable: 1. Pull outward on the negative (-) battery cable terminal release lever to the open position. 2. Lift up on the negative (-) battery cable terminal and set aside. Connecting The Jumper Cables 1.
Disconnecting The Jumper Cables 1. Disconnect the negative (-) jumper cable from the negative (-) battery cable terminal of the vehicle with the discharged battery . 2. Disconnect the opposite end of the negative (-) jumper cable from the negative (-) post of the booster battery .
FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , it can often be moved using a rocking motion. T urn the steering wheel right and left to clear the area around the front wheels.
CAUTION! • When “rocking” a stuck vehicle by shifting be- tween DRIVE/2nd gear and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drive- train damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure.
GEAR SELECTOR OVERRIDE If a malfunction occurs and the gear selector cannot be moved out of the P ARK position, you can use the following procedur e to temporarily move the gear selec- tor: 1. T urn the engine OFF . 2. Firmly apply the parking brake. 3.
TOWING A DISABLED VEHICLE NOTE: This section describes procedur es for towing a disabled vehicle using a commercial towing service. T owing Condition Wheels OFF The Ground MANUAL TRANS- MISSION EURO T.
CAUTION! • Do not use sling-type equipment when towing. V ehicle damage may occur . • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Damage to your vehicle may result from improper towing. If you must use the accessories (wipers, defroster , etc.
CAUTION! • T owing this vehicle in violation of the above re- quirements can cause severe transmission damage. Damage from improper towing is not covered un- der the New V ehicle Limited W arranty . Automatic (Aisin A W6F25) T ransmission • V ehicle can be towed with the front wheels elevated.
IGNITION KEY REMOV AL OVERRIDE This vehicle is equipped with a Key Ignition Park Inter- lock which requires the transmission to be in P ARK before the ignition switch can be turned to the LOCK/ OFF (key removal) position. T o remove the key manually , proceed as follows: 1.
6. Pull the release tab downwar ds using one hand and with the other one remove the key , sliding it outwar ds. 7. Once the key is removed, reinstall the steering column cover . CAUTION! It is advisable to contact your Authorized Dealer to have the reinstall procedure carried out.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMP AR TMENT — 1.4L TURBO . . . .379 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .380 ▫ Onboard Diagnostic System (OBD II) Cybersecurity ....................... .380 䡵 REPLACEMENT P AR TS ...........
▫ Euro T win Clutch T ransmission — If Equipped ........................ .406 ▫ Automatic T ransmission — Aisin A W6F25 T ransmission — If Equipped ............ .408 ▫ Appearance Care And Protection From Corrosion .........................
ENGINE COMP ARTMENT — 1.4L TURBO 1 — Air Cleaner Filter 4 — Battery 7 — Coolant Pressure Cap 2 — Engine Oil Dipstick 5 — Front Distribution Unit (Fuses) 8 — Coolant Pressure Bottle 3 —.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and Euro T win Clutch T ransmission control systems.
W ARNING! • ONL Y an authorized service technician should con- nect equipment to the OBD II connection port in order to diagnose or service your vehicle.
NOTE: Intentional tampering with emissions control systems may void your warranty and could r esult in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment.
CAUTION! (Continued) not covered by the New V ehicle Limited W arranty . If a flush is needed because of component malfunc- tion, use only the specified fluid for the flushing procedure. Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level.
Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further informa- tion.
Materials Added T o Engine Oil The manufacturer strongly recommends against the ad- dition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineer ed product and its performance may be impaired by supplemental addi- tives.
W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.) unless such removal is necessary for repair or maintenance.
W ARNING! (Continued) an output greater than 12 V olts. Do not allow cable clamps to touch each other . • Battery posts, terminals, and related accessories contain lead and lead compounds.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
A/C Air Filter W ARNING! Do not remove the A/C air filter while the vehicle is running, or while the ignition is in the ACC or ON/RUN mode. With the A/C air filter removed and the blower operating, the blower can contact hands and may propel dirt and debris into your eyes, resulting in personal injury .
5. Open the air filter access door . 6. Remove the particulate air filters from the HV AC air inlet housing. Pull the filter elements straight out of the housing. 7. Install the A/C air filter with the air filter position indicators pointing in the same direction as removal.
CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter . Failure to properly install the filter will result in the need to replace it more often. 8. Rotate the glove compartment door back into position.
Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to r emove salt or dirt from a dry windshield or rear window . A void using the wiper blades to remove frost or ice from the windshield or rear window .
Function Deactivation: The functionality is reset if: • T urn the ignition to the MAR/RUN position. • Number of subsequent activations is three. • T wo minutes timer has expired after turning the ignition OFF . NOTE: When turning the ignition ON, the blades will go into the parking position.
Rear W iper Blade Removal/Installation 1. Lift the rear wiper arm upward to raise the wiper blade off of the liftgate glass. 2. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder .
Adding W asher Fluid The windshield washer fluid reservoir is located in the engine compartment, and the fluid level should be checked at regular intervals. Fill the reservoir with wind- shield washer solvent (not engine coolant/ antifreeze). Refer to “Engine Compartment” in this section for fur - ther information.
W ARNING! (Continued) T o Know Before Starting Y our V ehicle” for further information. • A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system.
NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. In unusual situations involving grossly malfunctioning engine operation, a scor ching odor may suggest severe and abnormal catalyst overheating.
Coolant Checks Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather , where applicable). If the engine coolant (antifr eeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fr esh engine coolant (anti- freeze).
CAUTION! (Continued) Organic Additive T echnology (OA T) engine cool- ant is different and should not be mixed with Hybrid Organic Additive T echnology (HOA T) en- gine coolant (antifreeze) or any “globally compat- ible” coolant (antifreeze).
Please review these recommendations for using Organic Additive T echnology (OA T) engine coolant (antifreeze) that meets the requir ements of FCA Material Standard MS.
Cooling System Pressure Cap The cap must be fully tightened to prevent loss of engine coolant (antifreeze) and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery tank. The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces.
Coolant Level The coolant expansion bottle provides a quick visual method for determining that the coolant level is ad- equate. W ith the engine off and cold, the level of the engine coolant (antifreeze) in the bottle should be be- tween the “MIN” and “MAX” marks.
• If frequent engine coolant (antifreeze) additions are requir ed, the cooling system should be pressure tested for leaks. • Maintain engine coolant (antifreeze) concentration at a minimum of 50% OA T coolant (conforming to MS.90032) and distilled water for pr oper corr osion protection of your engine which contains aluminum components.
Brake Master Cylinder The fluid level in the master cylinder should be checked when performing under hood services, or immediately if the “Brake W arning Light” is on.
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
Manual T ransmission — If Equipped Lubricant Selection Use only the manufacturers recommended transmission fluid. Refer to “Fluids, Lubricants, And Genuine Parts” in “Maintaining Y our V ehicle” for further information. Fluid Level Check Check the fluid level by removing the fill plug.
Special Additives The manufacturer strongly recommends against using any special additives in the transmission. T ransmission fluid is an engineered product and its performance may be impaired by supplemental addi- tives. Therefor e, do not add any fluid additives to the transmission.
Fluid Changes Under normal operating conditions, the fluid installed at the factory will provide satisfactory lubrication for the life of the vehicle. However , if the vehicle is used for police, fleet, taxi, etc., change the fluid as indicated in the Maintenance Schedule.
Special Additives The manufacturer strongly recommends against using any special additives in the transmission. Automatic T ransmission Fluid (A TF) is an engineered product and its performance may be impair ed by supple- mental additives. Therefor e, do not add any fluid addi- tives to the transmission.
Fluid And Filter Changes Under normal operating conditions, the fluid installed at the factory will provide satisfactory lubrication for the life of the vehicle. Routine fluid and filter changes are not requir ed. However , change the fluid and filter if the fluid becomes contaminated (with water , etc.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR Car W ash, or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR Super Kleen Bug and T ar Remover to remove.
• If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the responsibility of the owner . • If your vehicle is damaged due to a collision or similar cause that destroys the paint and protective coating, have your vehicle repaired as soon as possible.
CAUTION! Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use oven cleaner . These products may damage the wheel’s protective finish. A void automatic car washes that use acidic solutions or harsh brushes that may damage the wheel’s pro- tective finish.
Y our leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOP AR T otal Clean.
Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch r esistant as glass and ther efore differ ent lens cleaning procedures must be followed.
Instrument Panel Bezels CAUTION! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully . Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface.
W ARNING! (Continued) assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor , torn web- bing, etc.). FUSES W ARNING! • When replacing a blown fuse, always use an appro- priate replacement fuse with the same amp rating as the original fuse.
Underhood Fuses The Front Distribution Unit is located on the right side of the engine compartment, next to the battery . T o access the fuses, push the release tabs and remove the cover . The ID number of the electrical component correspond- ing to each fuse can be found on the back of the cover .
Cavity Maxi Fuse Mini Fuse Description F01 70 Amp T an – Body Controller F02 60 Amp Blue – Body Controller Rear Distribution Unit F03 20 Amp Y ellow – Ignition Switch F04 40 Amp Orange – Anti-.
Cavity Maxi Fuse Mini Fuse Description F16 – 7.5 Amp Brown T ransmission Powertrain F17 – 10 Amp Red Powertrain F18 – 5 Amp T an Powertrain (Multiair – If Equipped) F19 – 7.
Interior Fuses The interior fuse panel is part of the Body Contr ol Module (BCM) and is located on the driver’s side under the instrument panel. Interior Fuse Panel 7 MAINT AINING YOUR VEHICLE 421.
Fuse Panel Cavity Locations 422 MAINT AINING YOUR VEHICLE.
Cavity V ehicle Fuse Number Mini Fuse Description 1 F12 7.5 Amp Brown Right Low Beam 2 F32 7.5 Amp Brown Front and Rear Ceiling Lights T runk and Door Courtesy Lights 3 F53 7.5 Amp Brown Instrument Panel Node 4 F38 20 Amp Y ellow Central Door Locking 5 F36 15 Amp Blue Diagnostic Socket, V ehicle Radio, Climate Control System, TPMS, Sunroof 6 F90 7.
Cavity V ehicle Fuse Number Mini Fuse Description 13 F43 20 Amp Y ellow Bi-Dir ectional W asher 14 F48 20 Amp Y ellow Passenger Power W indow 15 F13 7.
Rear Interior Fuses The rear interior fuse panel is located on the driver’s side in the rear compartment. Cavity V ehicle Fuse Number Mini Fuse Description 1 F61 15 Amp Blue Lumbar Regulation Seats .
Cavity V ehicle Fuse Number Mini Fuse Description 4 F65 20 Amp Y ellow Sun Blind 5 F66 20 Amp Y ellow Sunroof VEHICLE STORAGE If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery . • Disconnect the negative cable from the battery .
REPLACEMENT BULBS Interior Bulbs Bulb Number Overhead Lamp C5W Sun V isors C5W Courtesy Lamp W5W Glove Compartment C5W Rear Courtesy Lamp C5W Exterior Bulbs Bulb Number Front Low and High Beam Headlam.
Bulb Number Rear T ail/Stop Lamps P21/5W Rear T ail Lamp LED (See Authorized dealer) Rear T urn Signal Lamps P21W Rear Backup Lamps W16W Rear Side Marker Lamps LED (See Authorized dealer) Center High .
BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor . T urning the lamps on will usually accelerate the clearing process.
2. Rotate the bulb counterclockwise. 3. Remove the bulb when all the tabs are aligned with the openings in the metal holder . 4. Disconnect the electrical connector from the bulb.
5. Install the new bulb and rotate clockwise to lock in place. 6. Reinstall the plastic cap. New Bulb Installation Headlamp Sealing Cap Installation 7 MAINT AINING YOUR VEHICLE 431.
Front T urn Signal, Parking And Daytime Running Lamps 1. T urn front wheels inboard to access upper cover in wheel liner . 2. Open the upper cover on the front of the wheel liner . 3. Remove the cap from the back of the lower headlamp housing. 4. Rotate the bulb counterclockwise and r emove.
5. Remove the two screws that secur e the backplate to the tail lamp housing. 6. Separate the backplate from the tail lamp housing. 7. Remove the tail, stop, or turn signal bulbs by pushing them slightly and turning counterclockwise. 8. Remove the backup lamp bulb by pulling straight out.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant – 1.4L T urbo Engine W e recommend you use MOP AR Antifreeze/Coolant 10 Y ear/150,000 Mile Formula OA T (Organic Additive T echnology) or equivalent meeting the requirements of FCA Material Standard MS-90032.
CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive T echnology (OA T) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
Chassis Component Fluid, Lubricant, or Genuine Part Manual T ransmission – If Equipped W e recommend you use MOP AR C Series Manual & Dual Dry Clutch T ransmission Fluid. Euro T win Clutch T ransmission – If Equipped Gearbox: Use only MOP AR C Series Manual & Dual Dry Clutch T ransmis- sion Fluid or equivalent.
MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE ............ .438 ▫ Maintenance Chart ................... .440 8.
MAINTENANCE SCHEDULE Y our vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate in the instrument clus- ter .
Once A Month Or Before A Long T rip: • Check engine oil level. • Check windshield washer fluid level. • Check the tire inflation pressures and look for unusual wear or damage. • Check the fluid levels of the coolant reservoir , and brake master cylinder reservoir , and fill as needed.
Maintenance Chart Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 .
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
W ARNING! (Continued) • Failure to properly inspect and maintain your ve- hicle could result in a component malfunction and effect vehicle handling and performance.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 SUGGESTIONS FOR OBT AINING SER VICE FOR YOUR VEHICLE ...................... .447 ▫ Prepar e For The Appointment ............ .447 ▫ Prepar e A List ....................... .447 ▫ Be Reasonable W ith Requests .
䡵 DEP AR TMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES ................ .453 ▫ T readwear .......................... .453 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you are having warranty work done, be sure to have the right papers with you. T ake your warranty folder . All work to be performed may not be cover ed by the warranty .
facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized dealer service manager first. Most matters can be re- solved with this process.
Puerto Rico And U.S. Virgin Islands Customer Service Chrysler International Services LLC P .O. Box 191857 San Juan 00919-1857 T el.: (787) 782-5757 Fax: (787) 782-3345 Customer Assistance For The Hear.
The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract.
REPORTING SAFETY DEFECTS In The 50 United States And W ashington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying the manufacturer .
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted. If you prefer mailing your payment, please call for an order form.
• Call toll free at: 1-800-890-4038 (U.S.) 1-800-387-1 143 (Canada) Or • V isit us on the W orldwide W eb at: www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories wer e established by the National Highway T raffic Safety Administration.
W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10.
Adding Engine Coolant (Antifreeze) ........... .399 Adding Fuel ............................ .341 Adding W asher Fluid ..................... .395 Additives, Fuel .......................... .339 A i r B a g ................................. 4 3 Advance Front Air Bag .
Automatic T ransmission .......... .270, 283, 408, 410 Adding Fluid ...................... .409, 410 Autostick ............................ .289 Fluid And Filter Changes ................. .410 Fluid Change ......................... .410 Fluid Level Check .
Cellular Phone .......................... .229 Center High Mounted Stop Light ............. .433 Chains, T ire ............................ .329 Changing A Flat T ire ...................... .356 Chart, T ire Sizing ........................ .307 Checking Y our V ehicle For Safety .
Adding Coolant (Antifreeze) .............. .399 Coolant Level ..................... .398, 402 Disposal Of Used Coolant ................ .401 Drain, Flush, And Refill .................. .398 Inspection ........................... .402 Points T o Remember .
Electronic Throttle Control W arning Light ....... .172 Electronic V ehicle Information Center (EVIC) . .129, 186 Exit T rip ............................. .192 Start Of T rip Procedur e .................. .192 Emergency Deck Lid Release ..............
Filters Air Cleaner .......................... .385 Air Conditioning ...................... .389 Engine Fuel .......................... .434 Engine Oil ........................... .385 Engine Oil Disposal .................... .385 Flashers T urn Signal .
Gear Ranges ........................ .274, 284 Gear Select Lever Override ................. .371 General Maintenance ...................... .382 Glass Cleaning .......................... .415 Hazard Driving Through Flowing, Rising, Or Shallow Standing W ater .
Passive Entry Programming ............... .219 Unlock Liftgate ........................ .219 Key , Replacement .......................... 1 4 Keys ................................... 1 1 Key , Sentry (Immobilizer) .................... 1 3 Lane Change Assist .
Locks Child Protection ......................... 2 4 Door ................................. 2 1 Lubrication, Body ........................ .391 Lug Nuts .............................. .350 Maintenance Free Battery ................... .386 Maintenance, General .
Checking ............................ .383 Disposal ............................. .385 Filter ............................... .385 Filter Disposal ........................ .385 Materials Added T o ..................... .385 Pressur e W arning Light ..
Rear Camera ........................... .129 Rear Liftgate (Sedan) ....................... 2 8 Rear W indow Features ................. .155, 158 Reclining Rear Seats ........................ 9 8 Recorder , Event Data ....................... 5 9 Recreational T owing .
Seat Belt Maintenance ..................... .416 Seat Belt Reminder ......................... 3 2 Seat Belts ............................ .32, 81 Child Restraint .......................... 6 0 Front Seat ....................... .32, 34, 37 Inspection .
Wheel, T ilt ............................ 1 1 8 Steering Wheel Audio Controls .............. .227 Steering Wheel Mounted Sound System Controls . . .227 Storage ............................... .426 Stuck, Freeing ........................... .369 Sun Roof .
T owing ............................... .343 Disabled V ehicle ....................... .372 Recreational .......................... .344 T owing V ehicle Behind A Motorhome .......... .344 T raction ............................ .290, 291 T raction Control .
V ehicle Modifications/Alterations ............... 8 V ehicle Security Alarm (Security Alarm) .......... 1 5 V ehicle Storage .......................... .426 W arnings And Cautions ...................... 7 W arranty Information .................... 4 , 4 5 0 W asher Adding Fluid .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Fiat 500L (2016) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Fiat 500L (2016) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Fiat 500L (2016) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Fiat 500L (2016) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Fiat 500L (2016), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Fiat 500L (2016).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Fiat 500L (2016). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Fiat 500L (2016) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
