Manuale d’uso / di manutenzione del prodotto EN7410 del fabbricante Envision Peripherals
Vai alla pagina of 25
EN7410 17” TFT LCD Monitor User’s Manual By Env ision Peripherals Inc. www. E N V I S I ON d is p la y . co m.
i FOR YOUR SAFETY Before operating the monitor, please r ead this manual th oroughly. This manual should be retained for future referenc e. FCC Class B Radio Frequency Interference S tatement W ARNING.
ii PRECAUTIONS: • Do not use the monitor near water, e.g. nea r a bathtub, washbowl, kitchen sink, laundry tub, sw imming pool or in a wet basement. • Do not place the monit or on an unstable cart, stand, or table. If the monitor falls, it can injure a person and caus e serious damage to the appl iance.
iii circuit parts causing a fire or electric shock. Never spill liquids on the monitor . • Do not attempt to servic e the monitor by yourself. Open ing or removing covers can expose you to d angerous voltages and other hazar ds. Please refer all servicing to qualified service personnel.
iv GENERAL NOTES The following symptoms are normal with LCD monitor and do not indicate a probl em. • Due to the nature of the fluorescent light, the screen may flicker during initia l use. T urn off the Power Switch and then turn it on again t o make sure the flicker disappears.
v OTHER NOTES • The screen surface is very soft. Do not rub, touch or tap the screen surface with sharp object such as pen or pencil. This contact may scratch or damage the screen. These damages are not covered under the w arranty . • T urn your computer OFF before installi ng your ne w monitor .
vi Disclaimer Envision Peripherals Inc. makes no representations or warranties, either expressed or implied, with respect to the conten ts hereof and specifically disclaims an y warranties, merchantability or fitness for any particular purpose. Further , Envision Peripherals Inc.
vii T able of Contents 1 1 Import ant Safety Instructions ........................................... i 2 2 Featur es ............................................................................. 2 3 3 Unp acking th e Monito r ........................
1 1 1 Important Safety Instructions Please read the following safe ty instructions before in st alling or cleaning your Envision monitor: 1. Unplug the monitor ’s po wer cable from the wall o utlet before cleaning. Do not use liquid or aerosol cleaners.
2 2 2 Features Y our Envision EN7410 Monitor features: ♦ SXGA (1280 x 1024 pixel) Resolution LCD Panel ♦ High Brightness – 300 cd/m 2 (typical) ♦ High Contrast Ratio – 400:1 (typical) ♦ True Colour Display With FRC support for 16.7M colours, the Envision EN7410 monitor offers you better image quality.
3 3 3 Unpacking the Monitor Please check that the following items are in cluded with your monitor . If they are missing or damaged, please contac t your place of purchase immediately .
4 4 4 Hardware Installation Your monitor is equipped with an automat ic power supply with a voltage range from 100 to 240 Volts AC at a frequency of 50 to 60 Hz. Make sure that your local power supply is within the support ed range. If you are unsure, please contact your elec tricity supplier.
5 5 5 Windows driver Installation The Envision EN7410 is fully Windows compatible so no specific windows drivers are required to be loaded. Window s 98, ME, and 2000 The first time you start Win dows after co nnecting your new monitor , the system will detect the monitor and automatically start the Add New Hardw are wizard.
6 6 6 Setting the Display Resolution Choosing The Best Resolution All Liquid Crystal Displays (LCDs) have a fixed resolution that is the same as the maximum resolution that may be displa yed on the LCD. In the case of the EN7410 the LCD resolution is 1280 x 1024 pixels.
7 Supported Graphics Modes and Refresh Rate Selection There is no need to choose the highest possible refresh rate when using an LCD monitor . It is not technically possibl e for an LCD monitor to flicke r . Even at a refresh rate of 60 Hz you will get an absolutely flicker-free image.
8 caused by the signal from the VGA card if it does not correspond with the usual standard. This is not however , a problem with the monitor . If it is still visible after using th e Automatic adjustm.
9 7 7 Adjusting the Monitor Picture Optimisation The easiest way to obtain an optimal picture is by using the Auto button for 2 seconds. This only works reliably if the graphics ad aptor is set to use.
10 (from left to right) Menu Enter OSD menu. Enter submenus or select items within OSD menu. c Move the selection cursor upwards within the OSD menu. d Move the selection cursor downwards within the OSD menu. e Adjust OSD functions. (Decrease) f Adjust OSD functions.
11 Tracking Adjustment Position Adjustment CLOCK: Adjust to minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. PHASE: A djust to remove any horizont al distortion, and clear or sharpen the image of characters.
12 Color Adjustment Other There are three items for color adjustment: 9300K : Bluish white 6500K : Reddish white User defined: Red, Green, Blue. Adjust to set your own color level. LANGUAGE: Multi- Language selection OSD POSITION: Adjust the OSD window position on the screen.
13 8 8 Frequently Asked Questions The image is blurred, how can I get the best quality picture? ♦ Read chapter 6, Setting the Displa y Resolution , and select a graphics signal with the correct re solution and refresh rate. Then read ch apter 7, Adjusting the Monitor , and make a djustments to the displayed image based on these instructions.
14 No image is displayed, what can I do? ♦ Check that the light (LED) next to t he monitor’s po wer button is lit and is green in colour. If the LED is green, pres s the MENU button on the monitor to access the On Screen Display.
15 The display shows OUT OF FREQUENCY error message: ♦ Read chapter 6, Setting the Displa y Resolution , and select a graphics signal with the correct resolution and refresh rate.
16 9 9 Specifications Model: Envision EN7410 Display Characteristics Display T ype 17“ active matrix Thin Film T ransistor Liquid Crystal Display Viewable Diagonal Area 43.
17 Input Signal Line Frequency 31 - 83kHz multi-frequency Image Frequency (Refresh Rate) 56 - 75Hz Within the parameters det ailed in chapter 7 Video Signal RGB analogue (Positive polarity) 0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Envision Peripherals EN7410 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Envision Peripherals EN7410 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Envision Peripherals EN7410 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Envision Peripherals EN7410 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Envision Peripherals EN7410, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Envision Peripherals EN7410.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Envision Peripherals EN7410. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Envision Peripherals EN7410 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
