Manuale d’uso / di manutenzione del prodotto EG 33 del fabbricante Enviro
Vai alla pagina of 22
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY THIS MANUAL IS PRINTED ON RECYCLED PAPER EG 33 Direct Vent ZERO CLEARANCE By SHERWOOD INDUSTRIES LTD. an after market permanently located OWNERS MANUAL This appliance may be installed in manufactured (mobile) home, where not prohibited by local codes.
SAFETY PRECAUTIONS FOR SAFE INSTALLATION AND OPERATION OF YOUR “ENVIROGAS” STOVE, PLEASE, CAREFULLY READ THE FOLLOWING INFORMATION: GENERAL Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person.
TABLE OF CONTENTS Safety Precautions 2 Code Approvals 3 Assembly Instruction 3 Deciding where to locate y our stove 4 Mobile Home Information 4 Installation 5-6 Mantle and Vent restrictions 7 Flue Col.
4 DECIDING WHERE TO LOCATE YOUR STOVE DIMENSIONS: Front Width: 36 5/8”/ 93 cm Rear Width: 36 5/8”/ 93 cm Height: 32 1/4”/ 82 cm Depth 13 11/16”/ 34.77 cm Shipping Weight: 132 lbs/59.9 kg CLEARANCES: A. Side wall to stove 2”/ 5 cm B. Rear wall to stove 1”/ 2.
INSTALLATION: THIS UNIT HAS BEEN DESIGNED TO BE INSTALLED IN MANY LOCATIONS. BECAUSE THIS UNIT IS A ZERO CLEARANCE FIREPLACE IT MAY BE INSTALLED IN A WOOD FRAMED COMBUSTIBLE CHASE, AS SHOWN. FRA MING DIMENSIONS: WIDTH: 35 3/8” (89.85 CM) HEIGHT: 31 3/4” (80.
Place the unit into the framed opening. Nail or screw the unit to the frami ng using the nailing flanges provided. MA KE SURE THA T THE UNIT IS LEVEL AND PLUMB BEFORE NA ILIN G OR SCREWING TO THE FRA MING MEMBERS. ALSO INSURE THA T THE BOTTOM OF THE UNIT IS L EVEL WITH THE FINISHED HEA RTH HEIGHT.
REQUIRED MANTLE CLEARANCES MAKE SURE THAT THE MANT LE INSTALLATION STAYS WITHIN THE SHADED AREA IN THE DIAGRAM PROVIDED. THE MAXIMUM ALLOWABLE MANTLE WI DTH IS 10” (25.4 CM) THE M INIMUM HEIG HT FROM TH E TOP OF TH E SURROUND PANEL TO A 10” (25.4 CM) WIDE MANTLE IS 11” (27.
FLUE COLLAR INSTALLATION THIS UNIT CA N BE VENTED THREE DIFFERENT WA YS: ( HORIZONT AL, VERTICAL/HORIZONTAL OR VERTICALLY) The flue collar has been installed on the rear of the appliance at the factory. It can used in this location or the flue collar can be installed on the top of the firebox for vertical installations.
These models have been tested and certified for use with SIMPSON DURAVENT DIRECT VENT T YPE “GS” PIPE FOR GAS STOVES. Kits are available for vertical venting or hor izontal venting. It is re commended that a bead of RTV High Temperature Silicone be applied to each outer vent joint and MILPAC to eac h inner joint before installation.
When planning your installation, it w ill be necessary to select the proper length of vent pipe fo r your particular requirements . It is important to note when passing through a w all, the maximum allowable w all thickne ss is 10-inches (254 mm), 1 1/2” inches clearance to combustibles must be maintai ned.
F I G - 1 1 F I G - 1 2 F I G - 1 3 FIG-14 NOTES: (1) The four wood screw s provided should be replaced with the appropriate fasteners for stucco, brick, concrete, or other types of siding. (2) For buildings with vinyl siding, a vinyl siding st andoff (950), should be installed between the vent cap and the exterior wall FIG-12.
VERTICAL INSTALLATION STEP 1 . Check the instructions for required clearances (air spaces) to combustibles w hen passing through ceilings, walls, roofs, enclosures, attic rafters , or other nearby combus tible surfaces. Do not pack air spaces with insulation.
NOTES: (1) If an offset is necessary in the attic to avoid obstructions, it is important to support the v ent pipe every 3 feet, to avoid excessive stress on the elbows, and po ssible separation. Wall straps are available for this purpose. FIG-18 (2) When ever possible, use 45 ° degree elbows instead of 90 ° degree elbow s.
INSTALLATION OF LOGSET and EMBERS INSTA LLING THE GLOWING EMBERS and LOGSET A bag of ceramic fiber embers is provided for use on the front burner ember tray. CAUTION: Use only the type of ember material supplied with this appliance. Due to the irregular size of the ember material there may be more than required.
OPERATING INSTRUCTIONS FOR YOUR SA FETY READ BEFORE OPERA TING WA RNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A) This appliance is equipped with a pilot, which must be lit by hand by follow ing these instructions exactly.
ROUTINE MAINTENANCE and TECHNICAL Periodically check to ensure that your sy stem is clean. Periodically check the pilot and burner. Check to see that all the burner ports are clean and clear. Check the pilot head for blockage. Check to ensure the pilot flame is blue with no y ellow tips.
TROUBLE SHOOTING Problem Possible Cause Solution Spark will not light the pilot after repeated pressing of spark igniter Defective piezo igniter Check connections to igniter -If igniter connections ar.
GAS LINE CONNECTION WARNING: Only persons licensed to w ork with gas piping may make the necessary gas connections to this appliance. GA S LINE CONNECTION • This stove is equipped with a 3/8” female NPT thread located on the right hand side of the gas valve.
ELECTRICAL The ENVIROGAS EG 22.Z/CLEARANCE .DV. will operate with no external power supply. These models have a Millivolt gas control which uses the pilot flame to generate enough electricity to operate the main burner.
FUEL CONVERSION “Warning” This conversion kit shall be installed by a qualified service technician in accordance w ith the manufacturer’s ins tructions and all applicable codes and re quirements of the authority hav ing jurisdiction.
21 WARRANTY Sherwood Industries Ltd. offers a *Lifet ime Warranty on this gas product. T he lifet ime w arranty covers the appliance for a period of seven years from the date of installation.
INSTALLATION DATA SHEET The installer for warranty purposes and future reference must re cord the following information. Please keep this information f or your records.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Enviro EG 33 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Enviro EG 33 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Enviro EG 33 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Enviro EG 33 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Enviro EG 33, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Enviro EG 33.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Enviro EG 33. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Enviro EG 33 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
