Manuale d’uso / di manutenzione del prodotto RBT-1002-EU del fabbricante Enterasys Networks
Vai alla pagina of 56
P/N 9034169-07 Installation Guide Enterasys RoamAbout ® RBT -1002, RBT -1002 C, RBT -1002C-EU and RBT -1002-EU Wir e less Access Point.
.
I NOTICE ENTERASY S NETWOR KS reserves the rig ht to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all case s consult ENTE RASYS NETW ORKS to dete rmin e whether any such changes have been made.
II Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENIN G OR UTILIZING T HE ENCLOSED PRODUCT , CAREFULL Y READ THIS LICENSE AGREEMENT . This document is an agree ment (“Agreement”) bet w ee n the end us er (“ Y ou”) and Enterasys Networks, Inc.
III in part, including for reasons of error corre ction or interoperability , except to the extent expressly permitted by applicable law and to th e extent the partie s shall not be permitted by that a pplicable law , such rights are expressly excluded.
IV 5. UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The enclosed Program (i) was develope d solely at private expense; (ii) contains “restricted computer software” submitted with restricted rights in accordance with section 52.
V 8. AUDIT RIGHTS. You hereby acknowledge that the intellectual property rights associated wit h the Program ar e of critical va lue to Enterasys and, accordingly, You hereby agree to maintain complete books, records a nd accounts showing (i) licen se fees due and paid, and (ii) the use, copying and deployment of the Program.
VI 13. SEVERABILITY. In the event any provision of this Agreement is found to be invalid, illegal or unenforceab le, the validity, lega lity and enforceabilit y of any of the remaining provisions shall not in any way be affected or impaired thereby, and that provision shall be reformed, construed and en forced to the maximum extent permissible .
VII C OMPLIANCES RBT -1002, RBT -1002-EU Federal Communication Commiss ion Interference St atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
C OMPLIANCES VIII High power radars are allocated as primar y users (meaning they have priority) of the 5250-5350 MHz and 5725-5850 MHz bands. These radars co uld cause interference and /or damage to the access point whe n used in Canada.
C OMPLIANCES IX Countries of Operat io n & Conditions of Use in t he European Community This device is intended to be operated in all countries of the European Community .
C OMPLIANCES X Operation Using 5 GHz Channels in the Euro pean Community The user/installer must use the provided c onfiguration utility to check the current channel of operation an d make necessa ry .
C OMPLIANCES XI described in this document. • This device employs a radar detection feature requir ed for operation in the 5 GHz band. This feature is automatically enabled w hen the country of operation is correctly configured for any of the countries listed below.
C OMPLIANCES XII RBT -1002C, RBT -1002C-EU Federal Communication Commiss ion Interfere n ce Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
C OMPLIANCES XIII Operating Frequencies The user must use the configuration utility provided with this product to ensure the channels of operation are in conformanc e with the spectrum usage rules for country in which it is being operated.
C OMPLIANCES XIV • 7 cm (D=0.06494 m) is the minimum distance between the EUT and human body to meet the E-field strength of 61V/m. • The 5 GHz Turbo Mode feature is not allowed for operation in any European Community country. The current setting for this feature is found in the 5 GHz 802.
C OMPLIANCES XV Countries o f Operati on & Conditi ons of Use in t he Asia, Pac ific, and M iddle East Communities This device is intended to be operated in all count ries listed below of the Asia, Pacific, and Middle East Community . Requ irements for indoor vs.
C OMPLIANCES XVI Operation Using 5 GHz Chann els in the Asia, Pacific, and Middle East Community The user/installer must use t he provided configuration utility to check the current channel of operati.
C OMPLIANCES XVII Declaration of Conformity in Languages of the European Community English Hereby, Enterasys, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
C OMPLIANCES XVIII German (DE) Hiermit erklärt Enterasys, dass sich dieser/diese/dieses Radio LAN de- vice in Übereinstimmung mit den grundlegenden Anford erungen und den anderen relevanten Vorschr iften der Richtlinie 1999/5/EG befindet".
C OMPLIANCES XIX Safety Compliance Power Cord Safety Please read the following safety informat ion carefully before installing the access point: WA R N I N G : Installation and removal of the unit must be carried out by qualified personnel only .
C OMPLIANCES XX Switzerland The supply plug must comply with SEV/ASE 1011. U.K. The supply plug must comply with BS1363 ( 3-pin 13 A) and be fitted with a 5 A fuse which complies with BS1362. The mains cord must be <HAR> or <BASEC> marked and be of type HO3VVF3GO.
C OMPLIANCES XXI Hazardous Subst ances This product complies with the requirements of European Directive, 2002/95/EC, Restriction of Hazardous Substances (RoHS) in Electrical and Electronic Equipment.
C OMPLIANCES XXII.
XXIII Table of Contents Chapter 1 Introduction Package Checklist ............. ........... .............. .............. ........... .............. ............ ... 1-2 Hardware Description ...................... .............. .............. ........
XXIV Contents.
1-1 Chapter 1 Introduction Note: The RBT-1002C-EU, although listed in th is document , is not available until March 2008. Aunque el mo delo RBT-1002 C-EU está es pecificado en e ste documento , éste no e stará dispo nible sino hast a marzo de 2008.
Introduction 1-2 Complementary Code Keying (CCK ) modulation te chnology to achieve a communication rate of up to 1 1 Mbps. The access point support s a 54 Mbp s half-duplex connection to Ethernet networks for each active channel.
Hardware Description 1-3 Hardware Description T op Panel Rear Panel Antennas LED Indicators Security Slot 5 VDC Power Socket RJ-45 Port , PoE Connector Reset Button Console Port Bracket Fastening Scre.
Introduction 1-4 Component Description Antennas The access point includes inte grated diversity antennas fo r wireless communications. A diversity antenna system uses two identical antennas to receive and tr ansmit signals, helping to avoid multipath fading ef fects.
Hardware Description 1-5 LED Status Description Power Solid green Normal operation. All of the following are true: • Management li nk with a wireless switch is operational • Access point has boote.
Introduction 1-6 Security Slot The access point includes a Kensington security slot on the rear panel. Y ou can pr event unauthorized removal o f the access point by wrapping the Kensington se curi ty cable (not p rovided) around an unmovable object, inserting the lock into the slot, and turning the key .
Hardware Description 1-7 However , when connecting the access point to a workstation or other device that does no t ha ve MDI-X por ts, you must use crossover tw isted-pair cable.
Introduction 1-8 Features and Benefits • Local network connection via 10/100 Mbp s Ethernet port s or 54 Mbps wireless interfa ce (supporting up to 127 mobile users) • IEEE 802.1 1a, 802.1 1b and 802.1 1g compliant • Interoperable with multiple ve ndors based on the IEEE 802.
2-1 Chapter 2 Hardware Installation 1. Selec t a Site – Choose a proper p lace for the ac cess point. In general, the best location is at the center of your wireless coverage area, within line of sight of all wireless devices. T ry to place the access point in a position that can best cover it s Basic Service Set.
Hardware Installation 2-2 Mounting on a wall or the ceilin g– The access point should be mounted only to a wall or wood su rface that is at least 1/2-inch plywood or it s equivalent. T o mount the access point on a wall, or ceiling, always use its wall-mounting bracket.
Hardware Installation 2-3 Then screw down the fa sten ing screw to secure the access point to the bracket. 3. Lock the Access Point in Place – T o prev ent unautho rized removal of the acc ess point, you can us e a Kensington Slim MicroSaver security cable ( not included) to att ach the access point to a f ixed objec t.
Hardware Installation 2-4 4. Connect the Ethernet Cable – The acce ss point can be wired to a 10/100 Mbp s Ethernet network through a d evice such as a hub or a switch. Connect you r network to the RJ-45 port on the back panel with catego ry 3, 4, or 5 UTP Ethernet cable.
Hardware Installation 2-5 6. Obs erv e the Self T est – When you power on the access point, verify that the Power indicator stops blinking and remains on gree n, and that the oth er indicators st art functioning as described un der “LED Indicators” on page 1-4.
Hardware Installation 2-6 T o remove the bezel, grasp both sides and gently pry away from the fastening slots located on each antenna side. Pull th e bezel clear of the access point.
A-1 Appendix A Troubleshooting For troubles hooting inform ation, refer to th e RoamAbout Mobility System Sof tware Configuration Guide ..
T roubleshooting A-2.
B-1 Appendix B Configuration All configuration of the RBT -1002 is done from the RoamAbout wireless switch and the RoamAb out Switch Manager interface. Refer to the R oamAbout Switch Manager Use r Guide and the RoamAbout Mobility S ystem Software C onfiguration Guide for configuration informa tion.
Configuration B-2.
C-1 Appendix C Cables and Pinouts Twisted-Pair Cable Assignments For 10/100BASE-TX connections, a twisted- pair cable must have two pairs of wires. Each wire pair is iden tified by two different colors. For example, one wire might be gree n and the other , green with white stripes.
Cables and Pinouts C-2 The following figure illustrates how the pins on the RJ-45 connector are number ed. Be sure to hold the con nectors in the same orienta tion when attaching the wires to the pins.
T wisted-Pair Cable Assi gnment s C-3 7 -48V feeding power (Negative- Vport) 8 -48V feeding power (Negative- Vport) Note: The “+” and “-” signs represent t he polarity of the w ires that make up each wire pair .
Cables and Pinouts C-4 Straight-Through Wiring Because the 10/100 Mbp s port on the access point uses an MDI pin configur ation, you m ust use “straight-th rough” cab le for network connec tions to hubs or switche s that only have MDI- X port s.
D-1 Appendix D Specifications Note: The RBT-1002C-EU, although listed in this document, is not availab le until March 2008 . Aunque el mo delo RBT-1002 C-EU está es pecificado en e ste documento , éste no e stará dispo nible sino hast a marzo de 2008.
Specifications D-2 RBT -1002-EU ETSI: 1-13 France: 10-13 RBT -1002C-EU ETSI: 1-13 France: 10-13 Maximum Client s 127 total clients for the AP Operating Range Refer to the RoamAbout Switch Manager User Guide Dat a Rate 802.1 1a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel 802.
General Specifications D-3 4.92 ~ 4.98 GHz Japan 5.04 ~ 5.08 GHz Japan 802.1 1b : 2.4 ~ 2.4835 GHz (US, Canada) AC Power Adapters Input: 100-240 AC, 50-60 Hz Output: 5 VDC, 3 A or 2 A Maximum Power: 13.2 W Unit Power Supply DC Input: 5 VDC, 2 A PoE input: 48 VDC, 0.
Specifications D-4 Compliances RBT -1002, RBT -1002C FCC Class B (US) ICES-003 (Canada) RBT -1002C-EU, RBT -1002-EU RTTED 1999/5/EC Radio Signal Certification RBT -1002, RBT -1002C: FCC Part 15.247 (2.4 GHz) FCC part 15 15.4 07(b) RSS-210 (Canada) RBT -1002C-EU, RBT -1002-EU: EN 300.
General Specifications D-5 Transmit Power 16 QAM (36 Mbps) -77 -77 -78 -78 64 QAM (48 Mbps) -73 -73 -73 -73 64QAM(54 Mbps) -69 -70 -70 -67 IEEE 802.11g Data Rate Sensitivity (dBm) 6 Mbps -88 9 Mbps -87 12 Mbps -86 17 Mbps -85 24 Mbps -81 36 Mbps -77 48 Mbps -72 54 Mbps -70 IEEE 802.
Specifications D-6 48 Mbps 17 17 17 17 54 Mbps 12 17 17 16 IEEE 802.11g Maximum Outp ut Power (GHz - dBm) Data Rate 2.412 2.417~2.462 2.472 6 Mbps 20 20 18 9 Mbps 20 20 18 12 Mbps 20 20 18 18 Mbps 20 20 18 24 Mbps 20 20 18 36 Mbps 20 19 17 48 Mbps 17 16 15 54 Mbps 15 14 13 IEEE 802.
Index-1 A antenna description 1-4 antennas, positioning 2-5 B bezel 1-2 attaching and removing the bezel 2-5 C cable assignments C-1 crossover C-4 straight-through C-4 channels, maximum D-1 clients, m.
Index Index-2 S security slot 1-6 self test 2-5 site selection 2-1 specifications D-1 straight-through cable C-4 system defaults 1-8 T troubleshooting A-1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Enterasys Networks RBT-1002-EU è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Enterasys Networks RBT-1002-EU - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Enterasys Networks RBT-1002-EU imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Enterasys Networks RBT-1002-EU ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Enterasys Networks RBT-1002-EU, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Enterasys Networks RBT-1002-EU.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Enterasys Networks RBT-1002-EU. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Enterasys Networks RBT-1002-EU insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
