Manuale d’uso / di manutenzione del prodotto EOC5611P del fabbricante EnGenius Technologies
Vai alla pagina of 69
0 W ir eless O u t door Client Bridge / A cce ss P oin t E O C56 11P U ser Manua l V er sio n : 1.0.
1 T able of Cont en ts 1 PRODU CT OVERVIEW ........................................................................................................................................................... 3 1.1 F EA TURE ....................................
2 5.1 S YSTEM → IP S ETTI NGS ................................................................................................................................................ 30 5.2 S YSTEM → S P ANNING T REE S ETTINGS ............................
3 1 Product Overview Thank you f or using EO C 5611P . It is a powerful, e nhanced, enter prise scale pro duct with 4+1 multi-functions Acce ss P oint, Acce ss P oint with WDS function, Client Bri dge, WDS Bridge,and Client R outer . EO C5611 P is easily to ins tall almost an ywhere with Pow er over E thernet f or quick outdoor ins talla tion.
4 rearr ang e the workplace. e) W ireless ext ensions to E t hernet networks Network managers in dynamic envir onments can minimize the overhea d caused by moves, ext ensions to network s, and other change s with wireles s L ANs.
5 1.2 Benefit s Access P oint Mo de U se t his f eat ure to setup the access point ’ s con figur ation inf orma tion. It has support adjus ting tr ansmit power and channel. Client can acces s the network with diff erent regula tory se ttings and automa tically change to the local r egulations.
6 1.3 P a ckag e Con ten t s O pen the packag e care fully , and mak e sure that none of the items list ed b elow ar e missing. Do n ot discard the packing mat erials, in cas e of ret urn; the unit must be shipped in its original pack age.
7 • Re d: Bad Quality Pow er Requirement s Active Ethernet (P ower ove r Ethernet) Proprietary PoE design Pow er Adapter 24V / 1A DC Regulation Certifications FCC P art 15C/ 15B/ 15E, EN 301 893, E .
8 2 EOC5611P Multi-Function Instruction Guide 2.1 Acce ss P oint In the Access P oint Mode with WDS Function, E O C5611P functio n lik es a cen tral connection f or any sta tions or clients that support IEEE 802.11a/b/g network. Sta tions and Client mus t config ure the same SSID and Security Pa ssw ord to associa te within the rang e.
9 2.3 Client Bridge In the Client Bridge Mode, the EO C56 11P function li k es a wireless dongle. Connecte d t o an Access Poin t wirele ssly and surf inter net whenever y o u want. U sing Site Survey to sc an all the Access P o int within the range a nd configure its SSID and Security Passw or d to associa te with it.
10 frequency channel, more APs c onnected t oget her may low er throughput. P lease be aw are t o av oid loop connection, otherwise you ma y enable Spanning T re e Function.
1 1 3 Computer Settings 3.1 Assign a Sta t ic IP In order to c onfigure EO C56 11P , please f ol low the ins truction below: 1. In the Control P anel , double click Network Connections and then double click on the connection of your Network In terf ace C ard (NIC) .
12 3.2 Logging Me thod A fter comp lete the IP set t ings from las t section, you can now access the w eb-base d configur ation menu. 1. Open web br owser 2. Enter IP 19 2.168.1.1 into y ou addr ess filter . Auction: If you hav e change d the EO C561 1P L AN IP addre ss, mak e su re y ou enter the correct IP Addr ess.
13 4 Wireless Settings 4.1 S witching O pera tion Mode ( S ys tem → S ys tem Pro pertie s ) The EO C5611P supports 4 diff erent opera tio n modes: Acce ss P oint, Clien t Bridge, WDS Bridge, and Client Ro uter . Click Sy st em Properties under Sys tem Section t o begin.
14 Mode and then enable WDS Lin k Set tings function. 4.2 W ireles s Set t ings 4.2.1 A ccess P oint Mode → W irele ss Net work W ireless Mode EOC5611P supports 802.11a/b/g wireless band. Channel / Frequency The channel availabilit y is based on the country ’ s regulation.
15 Auction: When you select 802.11a (5GHz) as yo ur wireles s mode, only the wireless clie nt which supports 5GHz network c an associat e with. Please mak e sure your wir eless client supports 5GHz wireless network. Note: Enable Pr ofile Isolation will cause wireless clients can not communica te eac h other .
16 4.2.2 Client B ridge Mode → W ireles s Netw ork W ireless Mode EOC5611P supports 802.11a/b/g wireless band. SSID Specify the SSID i f known. SSID text box will be au tomatically fill in wh en select an AP in the Site Survey . Site Survey U sing Site Survey to scan nearby APs and then select the AP to establish the connection.
17 filled in manually . 4.2.3 WDS Bridge Mode → W irel ess N etw ork W ireless Mode EOC5611P supports 802.11a/b/g wireless band. Channel / Frequency The channel availabilit y is based on the country ’ s regulation. Apply / Cancel Press Apply t o apply t he changes or Cancel to return previous settings.
18 MAC Add ress Enter the Access Poin t ’ s MAC addres s that you would like to ext end the wireless area into the MAC addre s s filter . Mode Select Disable or Enable from the drop down list. Apply / Cancel Press Apply t o apply t he changes or Cancel to return previous settings.
19 4.2.4 Client R outer Mode → W irel ess N etw ork W ireless Mode EOC5611P supports 802.11a/b/g wireless band. SSID Specify the SSID i f known. SSID text box will be au tomatically fill in wh en select an AP in the Site Survey . Site Survey U sing Site Survey to scan nearby APs and then select the AP to establish the connection.
20 filled in manually . 4.3 W ireles s Security S ettings W ireless Security Se ttings section will guide you to the entir e Security modes c onfigura tion: WEP , WP A -PSK, WP A 2-PSK, WP A-PSK Mixe d, WP A , WP A2, and WP A Mixe d. W e strongly rec ommend that uses WP A2-P SK as y our security setti ngs.
21 4.3.2 WP A-PSK Security Mode Select WP A-PSK from the drop do wn list to begin the configuration. Encryption Select Auto , TKIP or AES f or Encry ption ty pe. P assphra se Specify the se curity password. Group Ke y U pdate Interva l Specify Group Key U p date Interval time.
22 Encryption Select Auto , TKIP or AES f or Encry ption ty pe. P assphra se Specify the se curity password. Group Ke y U pdate Interva l Specify Group Key U p date Interval time. Group Ke y U pdate T imeout Specify Group Key U p date T imeout time. P airwise Key U pdate Interva l Specify Pairwise Key U pdate T imeout time.
23 4.3.5 WP A WP A security mode is f or 802.1x authen tication. Y o u must provi de a RADIUS Server to check the permission of access the netw ork. Security Mode Select WP A from the drop d own list t o begin the configura tion . Encryption Select Auto , TKIP or AES f or Encry ption ty pe.
24 4.3.6 WP A2 WP A2 security mode is f or 802.1x authentica t ion. Y ou must pr ovide a RADIUS Server to check the permission of access the netw ork. Security Mode Select WP A2 from the drop do wn list to begin the configuration. Encryption Select Auto , TKIP or AES f or Encry ption ty pe.
25 4.3.7 WP A Mixe d WP A Mix ed security mode is f or 802.1x authentic ation. Y ou must pr ovide a RADIUS Server to check the permission of access the netw ork. Security Mode Select WP A Mixed from the drop down list to begin the configur ation. Encryption Select Auto , TKIP or AES f or Encry ption ty pe.
26 4.3.8 Ra dius Acc ounting Radius Accoun ting function allows y ou to rec or d the st atics of user login. Y o ur Radius Server must hav e the abilit y to support Radius Accoun ting function. Radius Accoun ting Select Enable to begin configura tion of Radius Accounting.
27 Data Rate Select Data Rate from the drop down list. Dat a ra te will affect the efficiency of the throughput. If the data r at e is set to a small numb er , the lower through will get but it can transmit t o longer distance. T ransmit P ower Select T ransmit Powe r to increase or decrease T r ansmit Pow er .
28 4.5 W ireles s → W irele ss MA C F ilter Wireless MAC Filters is used to Allow or Den y wireless clients, by their MAC addresses, accessing the Network. You can manually add a MAC addr ess to restrict the permission to access EOC5611P. The default setting is Disable Wireless MAC Filters.
29 4.6 W ireles s → WDS Link Se ttings WDS Link Settings is use d to e sta blish a connection between Acc ess P o int s but the device is not losing Access P o int function. AP has WDS function c an extend the wir eless cov erag e and allow L ANs to communica te each other .
30 5 LAN Settings This section will gu ide you to the Loc al Are a Network (LA N) settings 5.1 S ys tem → IP Set tings This section is only available f or Non-R outer Mode . IP Set tings allows y ou to L AN port IP addr ess of the EO C56 11P . Auction: Changing L A N IP Addre ss will change L AN Interf ace IP addr ess.
31 5.2 S ys tem → Sp an ning T ree Set tings Spanning T ree Sta tus Select the Radio bu tton to On or O ff Spanning T ree fun ction. Bridge Hello T ime Specify Bridge Hello T ime in s econd. Bridge Max Ag e Specify Bridge Max A ge in second. Bridge Forwar d Dela y Specify Bridge Forward Delay in second.
32 6 Router Settings This section is only available f or AP Rout er Mode and Client R outer Mode . 6.1 R outer → W AN Se ttings There are fo ur diff eren t types o f W AN connection: Static IP , DHCP , PPPoE and PPTP . Please cont act your ISP to select the connection type.
33 Interne t Connection T ype Select Static IP to begin configuration of the Sta tic IP connec tion. Accoun t Name Specify Account Name that is provided by ISP . Domain Name Specify Domain Name th at is provided by ISP . MTU Specify the Maxi mum T ransmit Unit siz e.
34 MTU is set too low, the router will fragment packet s unnecessarily and in extreme cases may be unable to establish some connection s. In either case, network performance can suffer.
35 6.1.2 W AN Se ttings → DHCP (Dynam ic IP) Select DHCP as your W AN connection type to o btain your IP ad dre ss automa tically . Y ou will need to enter Acc o unt Name as y o ur hostname and DNS (O ptional). Interne t Connection T ype Select DHCP to begin configu ration of the DHCP connection.
36 Apply / Cancel Press Apply t o apply t he changes or Cancel to return previous settings. Auction: If the router's MTU is set too high, packets will be fragmented downstream. If the router's MTU is set too low, the router will fragment packet s unnecessarily and in extreme cases may be unable to establish some connection s.
37 6.1.3 W AN Se ttings → PPP oE (Point -to-P o int Pr ot ocol over E thernet) Select PPPoE as y our W AN connection type if your ISP pr ovides U sername and P assw or d. PPPoE is a DSL ser vice and please r emove your PPP oE softwa re fr om your com puter , the so ftware is no t work ed in EO C5611P .
38 Connect on Demand Select the Radio bu tton to specify the maximum id le time. I nternet connection wil l disconnect when it reach the maximum idle ti me, but it will automatically connect when user tries to access the n etwork. Kee p Alive Select the Radio bu tton to k eep internet connection a lwa ys on.
39 6.1.4 W AN Se ttings → PPTP ( P oint -to-Poi nt T unneling Pro t ocol) Select PPTP as your W AN c onnection type if your ISP provid es inf or mation about IP A ddre ss, Subnet Mask, Def ault Gat ewa y (Optional), DNS (Optional), Server IP , U sername, and Pass wor d.
40 MTU Specify the Maxi mum T ransmit Unit siz e. Suggest remain in Auto. IP Addre ss Specify W AN port IP addre ss. IP Subnet Mask Specify W AN IP Subnet Mask. Gatew a y IP Addr ess Specify W AN Gatewa y IP address. PPTP Server Specify PPTP Ser ver IP address.
41 6.2 R outer → L AN Sett ings IP Addre ss Specify L AN port IP address. IP Subnet Mask Specify L AN IP Subnet Mask. WINS Server IP Specify WINS Server IP . U se Router As DHCP Server Place a Check to enable DHCP server . Starting IP Addr ess Specify DHCP s erver starting IP address.
42 6.3 R outer → VPN P a ss Thro ugh VPN Pass Through is use d to allow cert ain pro toc ol to be tunneled thr ough an IP network such a s PPTP and L2TP or implement secure ex change of pack ets at the IP La yer such as IPSec. PPTP Pa s s Through Place a Check to enable PPTP protocol pass es through W AN .
43 6.4 R outer → P ort F orwa rding Port F orwar ding is used t o allow a public service such as W eb Server , Mai l Server , and FTP ser ver t o be set up. For e x ample: Set up a W eb Server on yo ur computer with port number 8080 . V isitor on the internet c an access y o ur W eb Server by ent e ring W AN Port IP with port number 8080 .
44 IP Addre ss Specify IP address. Sav e / Cancel Press Sa ve t o apply the changes or Cancel to return p revious set tings. 7 Information Status Status section is on the navigation drop-down menu. You will then see three options: Main, Wir eless Client List, System Log, WDS Link Status, Conne ction Status, and DHCP Client Table.
45.
46 7.2 Sta tus → W irel ess Clien t Lis t Click on the Wirel ess Clie nt List link under the Status drop-do wn menu. This page displays the list of Clients that are associated to the EOC5611P. The MAC addresses and signal st rength for each client is displayed.
47 7.3 Sta tus → S ystem Log Click on the System Log link under the St atus drop-down menu. The device automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained.
48 7.4 Sta tus → WDS L ink Sta tus The WDS Link Status will only show in WDS Bridge Mode. Click on the WDS Link Status link under the Status drop-down menu. This page displays the current status of WDS link, including station ID, MAC address, status and RSSI.
49 7.5 Sta tus → Connec tion Sta tus Click on the Connection Status link under the Status drop-down menu . This page displays the current status o f th e network, including network type, SSID, BSSID, connection status, wirel ess mode, current channel, security, data rate, noise level and sign al strength.
50 7.6 Sta tus → DHCP Clien t T able Click on the DHCP Client List link under the St atus drop-down menu. This page displays the list of Clients that are associated to the EOC5611P th rough DHCP. The MAC addresses and signal st rength for each client is displayed.
51 8 Management Setting s Management section is on the navigation drop-down menu. You will then see seven opt ions: administration, management V LAN, SNMP settings, backup/restore settings, firmware up grade, time settings, and log. Each option is described be low.
52 Remo te U pgrade Select the Radio bu tton to Enable or Disable Remote U p grade. Remo te Manage ment P ort Specify the Port number for Remote Management. For ex a mple: If you specify the Port number is 8080, then you will need to enter f ollowing http://<IP addre ss>:8080 to access the web interf a ce.
53 8.2 Managemen t → Managemen t VLAN Click on the Management VLAN link under the Management menu. This option allows you to assign a VLAN ID to the packets on wired network. Management VL AN (W ired) is use d to manage y o ur device if the computer h as authoriz ed VLAN ID .
54 8.3 Managemen t → SNMP Set tings Click on the SNMP Settings link under the Management menu. This is a netw orking management prot ocol used to monit or network -att ache d devices. SNMP allows messag es (c alled pr ot ocol dat a units) to be sent t o vario us parts o f a network.
55 8.4 Managemen t → Backup/R est ore S et tings Click on the Backup/Restore Sett ing link under the Management menu. This option is used to save the current settings of the device in a file on your local disk or load settings on to the device from a local disk.
56 8.5 Managemen t → F irmwa re U pgr ade Click on the Firmware Upgrade link und er the Management menu. This page is used to up grade the firmware of the device.
57 8.6 Managemen t → T ime Set t ings Click on the Time Settings link under th e Management menu. This page allows you to configure the time on the device. You may do th is manually or by connecting to a NTP server. Manually Set Date and T ime Manually setup the date and time.
58 8.7 Managemen t → Log Click on the Log link under the Management menu. The Log page displays a list of event s that are triggered on the Ethernet and W ireless interface. This log can be referred when an unknown error occurs on the system or when a report needs to be sent to the technical support department for debugging purposes.
59 8.8 Managemen t → Diagnostics Click on the Diagnostic s link under the Management menu. This function allows you to detect connection quality and trace the routing table to the target. Traceroute can help you to manage your network by detecting any routing during the t ransmission.
60 9 Network Configuration Example This chapter desc ribes the role of the E O C5611P with 4 diff e rent modes. The Acc ess P oint mode’ s defa ult configur atio n is a centr al unit of the wir eless netw ork or as a root device of the wir ed envir onment.
61 to connect with or enter SSID manu ally . Step3 Configure VL AN ID in your wireless device if available. Step4 Select correct authentication type and passw ord. Auction: EOC5611P’ s A ccess Point Mode does not provide DHCP server so th e W ireless Client IP addre ss must configure manually at th e same subnet in Local Are a Network.
62 WDS Bridge Step1 Login to the web-based configuration inte rf ace with def ault I P 192.168.1.1 Step2 Select your country or region’ s regulation. Step3 Select Opera tion Mod e to WDS Bridge from Sys tem Properties . Step4 802.11a/b/g wirele ss network.
63 Please r ef er to the las t section to check Acce ss point’ s configura tion. Client R outer Step1 Login to the web-based configuration inte rf ace with def ault I P 192.168.1.1 Step2 Select your country or region’ s regulation. Step3 Select Opera tion Mod e to Client Router from S ys tem Properties .
64 10 VLAN CONFIGUR ATION GUIDE Following proc ed ures are use d to con figure VL AN on EnGenius product. EnGenius product supports both wirele ss and wire d t agging on y our network. W irele ss tagging can help y ou to divide the permission for dif fe r ent gr oup of users.
65 2. Press “ W ireless Netw ork ” to con figure W ir eless VLA N. 3. T o configure W i reless VLAN T agg ing , please pre ss Edit a t W irele ss Netw ork section.
66 4. A fter Pr ess Edit, web s hould pop-out a window as below . Y ou may en ter your desi re VL AN ID. The n, pres s Sav e to sav e the changes. 5. W ireless Netw ork webp age should hav e display all the VID as below .
67 6. Press Ma nageme nt VL AN to configure wire d VID. Enter y our desir e VL AN ID and press Apply to configure t he changes. Auction: After pre ss Apply, you must configure y our Layer2 Switch or RADI US Server with th e same VLAN ID. Oth erwise, you cann ot access to the devi ce’s web-base con figuration page.
68 Appendix A – FCC Interferen ce Statement Fe deral Communication Commission Int erfer ence Sta tem ent This equ ipment has been tes ted and found to comply with the limits for a Class B d igital d evice, pu rsuant to Part 15 of the FCC Rules.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il EnGenius Technologies EOC5611P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del EnGenius Technologies EOC5611P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso EnGenius Technologies EOC5611P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul EnGenius Technologies EOC5611P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il EnGenius Technologies EOC5611P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del EnGenius Technologies EOC5611P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il EnGenius Technologies EOC5611P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo EnGenius Technologies EOC5611P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
