Manuale d’uso / di manutenzione del prodotto EOC2611P del fabbricante EnGenius Technologies
Vai alla pagina of 89
E O C26 11P Wi r e l e s s Outdoor Acc es s Po i nt / Client Bridg e User Manual V ersion: 1 .0.
EnGenius E OC261 1P V ersion 1.0 2 Ta b l e of Conten ts 1 INTRODUCTION .......... ............................. ................................. .................................. ......... ........... 6 1.1 F EATURES ...
EnGenius E OC261 1P V ersion 1.0 3 5.3.3 S PANNIN G T REE S ETTINGS .............................. ............................................. ..................................... 3 8 5.4 W IRELESS ................... ..........
EnGenius E OC261 1P V ersion 1.0 4 7.4.2 LAN S ETTINGS .................................................... ............................................. .............................. 77 7.4.3 VPN P ASS T HROUG H .......... ..
EnGenius E OC261 1P V ersion 1.0 5 Rev i si on His t o ry Ve r s i o n Date Rem ark 1.0 Dec 15, 2009 Initial Ve rs i o n .
EnGenius E OC261 1P V ersion 1.0 6 1 Introduction EOC 261 1P is a long rang e outdoor wireless Acc ess Poi nt / Client Bridge that opera tes se amlessly in the 2.
Security ¾ 802.11i WEP , WP A, WP A2 (Encr yptio n support TKIP /AE S) ¾ MAC address functions MAC addre ss fi lter (AP mode) ¾ 802.1x IEEE802.
1.4 Applications The wireless LA N pr oducts are easy to ins tall and highl y efficient. The fol l ow i ng list describe s some of .
2 Understanding the Hardware 2.1 Hardware Installation 1. Place the unit in an appropriate location after conducting a site survey.
EnGenius E OC261 1P V ersion 1.0 10 2.3 Mounting Kits The images below depict the standard mount ing kits. 2.
EnGenius E OC261 1P V ersion 1.0 11 2. Select Internet Prot ocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your P C/Notebook.
EnGenius E OC261 1P V ersion 1.0 12 3 Switching Between Operating Modes This devi ce can operate in thre e modes: Access Point, Client Bridge , WDS Bridge , Client Router and Mesh modes.
EnGenius E OC261 1P V ersion 1.0 13 4 Access Point Operating Mode 4.1 Logging In Afte r logging in you will graph ical user interface (GUI) of the device.
4.2 Status There are thre e opti ons under the Status section of the lef t menu: Main , Wireless Client List , and Syste m Log . Each option is described in detail below.
EnGenius E OC261 1P V ersion 1.0 15 4.2.2 Wireless Client List This page di spla ys the list of Clients that are associated to th e Access Point. The MAC addresses and signal strength for each client is display ed.
4.3 System Under the System section of the left menu, you will see the following options: System Prop erties, IP Set tings , and Spanning Tree Settings.
4.3.2 IP Set tings This page all ows you to configure th e device with a static IP address or a DHCP client.
4.3.3 Spanni ng Tree Setting s Spanning ‐ Tre e Protocol is a link ma nagement protocol that provi des path redundanc y while preventing undesirable loops in the network.
4.4 Wireless The Wirel ess sec tion of the left men u has the following options: Wirel ess Network , Wireless MAC Filter , WDS Link Settings , and Wireless Advanced Settings .
EnGenius E OC261 1P V ersion 1.0 20 SSID : Type in yo ur SSID VLAN ID: Specify the VLAN ID to be applied to this SSID. Suppressed SSID: When enabl ed, the SSID will be hidden.
EnGenius E OC261 1P V ersion 1.0 21 ` Wireless Security – Securi ty Mode : WEP `` Security Mode : Select WEP from the drop ‐ down list if your wireless network uses WEP encryption.
EnGenius E OC261 1P V ersion 1.0 22 ` Wireless Security – Securi ty Mode : WPA ‐ PSK, WPA2 ‐ PSK, WPA ‐ PSK Mixed `` Security Mo.
EnGenius E OC261 1P V ersion 1.0 23 ` Wireless Security – Securi ty Mode : WPA, WPA2, WPA Mixed `` Security Mode : Select WPA , WP A2 or WPA Mixed from the drop ‐ down list if your wireless network uses WPA.
EnGenius E OC261 1P V ersion 1.0 24 4.4.2 Wireless MAC Filter On this page you can filter the MAC address by allowing or blocking acce ss the network .
EnGenius E OC261 1P V ersion 1.0 25 4.4.3 WDS Link Settings On this page you can set the WDS link to connect to another WDS AP or WDS Br idge. The Maximum connectio n is up to 8 units.
EnGenius E OC261 1P V ersion 1.0 26 4.4.4 Wireless Advanced Settings On this page you can co nfigure the advanced setting s to tweak th e perform ance of your wireles s network.
EnGenius E OC261 1P V ersion 1.0 27 4.5 Management The following options ar e under the Manag ement sect ion of the left menu: Admi nist ratio n, SNMP settings, backu p/rest ore settings, firmw are upg rade, time settings, and log .
EnGenius E OC261 1P V ersion 1.0 28 4.5.2 Management VLAN This optio n allows you to specify VLAN ID (From 1 to 4095). Caution: If you reconfigure th e Management VLAN ID , you may lose connectivity to the access point.
EnGenius E OC261 1P V ersion 1.0 29 4.5.3 SNMP Se ttings This option allows you to assign the contact details, location , and community name and trap settings for SNMP.
EnGenius E OC261 1P V ersion 1.0 30 4.5.4 Backup/Restore settings, Reset to factory default setting s This option is used to save th e curre.
EnGenius E OC261 1P V ersion 1.0 31 4.5.5 Firmware Upgrade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded th e appropriate firmware from your vendor.
EnGenius E OC261 1P V ersion 1.0 32 4.5.7 Log The Log pag e dis plays a list of even ts that are triggered on the Ethernet and Wireless interface.
EnGenius E OC261 1P V ersion 1.0 33 5 Client Bridge Operating Mode 5.1 Logging In Afte r logging in you will graph ical user interface (GUI) of the device.
EnGenius E OC261 1P V ersion 1.0 34 the ‘LAN Settings’ section. In the ‘Current Wireless Settings’ section, the operat ion mode, wireless mode, channel/frequency, SSI D, security and distance are d isplayed.
5.2.2 Connection Stat us Click on the Connection Status link under the Status drop ‐ down menu. This page dis plays the curren.
EnGenius E OC261 1P V ersion 1.0 36 5.3 System Under the System section of the lef t menu, you will see the follo wing optio ns: System Properties, IP Settings, and Spanning Tree Settings.
5.3.2 IP Setti ngs This page all ows you to configure th e device with a static IP address or a DHCP client.
5.3.3 Spanning Tre e Settings Click on the Spannin g Tr ee link under the Syste m drop ‐ down menu Spanning ‐ Tree Protocol is .
5.4 Wireless The Wireless section of the left menu ha s the follo wing options: Wireless Network, Wireless Security and Wireless Advanced Se ttings . Each opti on is descri bed below.
EnGenius E OC261 1P V ersion 1.0 40 5.4.2 Wireles s Security You can ch ange the wireless security settings may cause this wireless client to associate with a different one.
Wireless Security : WEP Security Mode : Select WEP from the drop ‐ down list if your wireless netw ork uses WEP encryption.
Wireless Security : WPA ‐ PSK Security Mode : Select WPA ‐ PS K from the drop ‐ down list if your wireless network uses WPA pre ‐ shared key.
Wireless Security : WPA2 ‐ PSK Security Mode : Selec t WPA2 ‐ PSK from the dr op ‐ down lis t if your wirele ss network uses WPA2 pre ‐ shared key.
5.4.3 Wireles s Advanced Settings On this page you can co nfigure the advanced setting s to tweak th e perform ance of your wireles s network.
EnGenius E OC261 1P V ersion 1.0 45 5.5 Management The following options are under the Management section of the left menu: Administration, SNMP Settings, Backu p/Resto re Settings, F irmwa re Upg rade, Time Settings , Log and Diagnostics .
EnGenius E OC261 1P V ersion 1.0 46 5.5.2 SNMP Setti ngs This option allows you to assign the contact details, location , and community name and trap settings for SNMP.
EnGenius E OC261 1P V ersion 1.0 47 5.5.3 Backup/Restore settings, Reset to factory default settings This option is used to save th e curren.
EnGenius E OC261 1P V ersion 1.0 48 5.5.4 Firmware Upg rade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded th e appropriate firmware from your vendor.
EnGenius E OC261 1P V ersion 1.0 49 5.5.5 Time Settings This page allows you to conf igure the time on the device. You ma y do this manually or by connecting to a NTP server.
EnGenius E OC261 1P V ersion 1.0 50 5.5.7 Diagnostics Click on the Diagnostics link unde r the Manageme nt menu. In this page , user can let unit to ping other network equipment.
EnGenius E OC261 1P V ersion 1.0 51 6 WDS Bridge Operating Mode 6.1 Logging In Afte r logging in you will graph ical user interface (GUI) of th e device.
EnGenius E OC261 1P V ersion 1.0 52 Firmware ar e displayed in the ‘System Information’ section. IP address, Subnet Mask, De faul t Gateway and DHCP Client are displayed in the ‘LAN Settings’ section.
EnGenius E OC261 1P V ersion 1.0 53 6.2.2 WDS Link Status This page displ ays the cu rrent status of the WDS Link , including Sta tion ID, MAC address, Sta tus, RSSI (Received Signal Stre ngth Indicator).
EnGenius E OC261 1P V ersion 1.0 54 6.3 System Under the Syste m section of the left menu, you will see the fo llowing option s: System Properties, IP Settings and Spanning Tree Settings .
6.3.2 IP Setti ngs This page allows you to configure the device with a static IP address or a DHCP client.
6.3.3 Spanning Tre e Settings Spanning ‐ Tr ee Protocol is a link management protocol that prov ides path redun dancy while preventing undesirable loops in the network.
EnGenius E OC261 1P V ersion 1.0 57 6.4 Wireless The Wireless section of the lef t menu ha s the following options: Wir eless Ne twork, WDS Link Settings, WDS Security and Wireles s Advanced Se ttings .
EnGenius E OC261 1P V ersion 1.0 58 6.4.2 WDS Link Settings This page all ows you to setting your WDS device link up to 16 units.
EnGenius E OC261 1P V ersion 1.0 59 6.4.3 WDS Security Security Mode : Select WEP from the drop ‐ down list if your wireless netw ork uses WEP encryption.
EnGenius E OC261 1P V ersion 1.0 60 6.4.4 Wireles s Advanced Settings On this page you can conf igure the advanced set tings to tweak th e per formance of yo ur wireless network.
EnGenius E OC261 1P V ersion 1.0 61 6.5 Management The follow ing opt ions are under the Management section of the left menu: Administration, SNMP Settings, Backup/Restore Settin gs, Firmware Upgrade, Time Settings, Log and Diagnostics .
EnGenius E OC261 1P V ersion 1.0 62 6.5.2 SNMP Setti ngs This option allows you to assign the contact details, location , and community name and trap settings for SNMP.
EnGenius E OC261 1P V ersion 1.0 63 6.5.3 Backup/Restore settings, Reset to factory default setting s This option is used to save th e curre.
EnGenius E OC261 1P V ersion 1.0 64 6.5.4 Firmware Upgrade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded the appropriate firmware from your vendor.
EnGenius E OC261 1P V ersion 1.0 65 6.5.6 Log Log page displays a list of events that are triggered on the Etherne t and Wireless interface.
EnGenius E OC261 1P V ersion 1.0 66 6.5.7 Diagnosti cs In thi s page , user can let unit to ping other network equipment. And user also can monit or a route from unit to your target.
7 Client Router Oper ating Mode 7.1 Logging In Afte r logging in you will graph ical user interface (GUI) of the device. The navigation drop ‐ down menu on left is divided into four se ctions: 1.
EnGenius E OC261 1P V ersion 1.0 68 7.2.1 Main The status that is displa yed corresponds with th e operati ng mode that is selected.
EnGenius E OC261 1P V ersion 1.0 69 7.2.3 Connection Stat us This page displa ys the current status of th e network, including network t.
EnGenius E OC261 1P V ersion 1.0 70 .
EnGenius E OC261 1P V ersion 1.0 71 7.3 Sys tem Under the System section of the left menu, you will see the following opt ions: System Properties setting , which is described below.
EnGenius E OC261 1P V ersion 1.0 72 7.4 Router Under the Rou ter section of th e left menu, you will see the following op tions: WAN settings, LAN setting s , and VPN Pass Through .
EnGenius E OC261 1P V ersion 1.0 73 7.4.1.2 WAN – Static IP The WAN interfa ce can be configured as Static IP address.
EnGenius E OC261 1P V ersion 1.0 74 7.4.1.3 WAN – PPPoE The WAN interface can be configured as PPPoE. Thi s type of connection is usu al ly used for a DSL service and requires a username and password to con nect.
EnGenius E OC261 1P V ersion 1.0 75 7.4.1.4 WAN – PPTP The WAN interface can be configured as PPTP. This type of connection is usually used for a DSL service and requires a username and password to con nect.
EnGenius E OC261 1P V ersion 1.0 76 Domain Name Servi ce : Select Get Au tomatically from ISP if th e ISP will provide the DNS add ress,.
EnGenius E OC261 1P V ersion 1.0 77 7.4.2 LAN Settings This page allows you to config ure the LAN interface as IP add ress, IP subnet mask and WINS server IP.
EnGenius E OC261 1P V ersion 1.0 78 7.5 Wireless Under the Wi r e l e s s section of the left menu , you will see the foll ow in g options: Wireless Network, Wireless Security, and Wireless Advanced Settings .
EnGenius E OC261 1P V ersion 1.0 79 7.5.2 Wireles s Security 7.5.2.1 Wireless Secur ity : WEP Security Mode : Select WEP from the drop ‐ down list if your wireless netw ork uses WEP encryption.
EnGenius E OC261 1P V ersion 1.0 80 7.5.2.2 Wireless Secur ity : WPA ‐ PSK, WPA2 ‐ PSK Security Mode : Select WPA ‐ PS K or WPA2 ‐ PSK from the drop ‐ down list if your wireless network uses WPA pre ‐ shared key.
EnGenius E OC261 1P V ersion 1.0 81 7.5.3 Wireles s Advanced Settings On this page you can co nfigure the advanced setting s to tweak th e perform ance of your wireles s network.
EnGenius E OC261 1P V ersion 1.0 82 7.6 Mana geme nt Under the Manageme nt section of the left menu, you will find the following opti.
EnGenius E OC261 1P V ersion 1.0 83 7.6.2 SNMP Setti ngs This option allows you to assign the contact details, location , and community name and trap settings for SNMP.
EnGenius E OC261 1P V ersion 1.0 84 7.6.3 Backup/Restore settings, Reset to factory default settings This option is used to save th e curren.
EnGenius E OC261 1P V ersion 1.0 85 7.6.4 Firmware Upg rade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded th e appropriate firmware from your vendor.
EnGenius E OC261 1P V ersion 1.0 86 7.6.6 Log Click on the Log lin k under the Management menu. The Log page displays a list of events that are triggered on the Ethernet and Wireless interface.
EnGenius E OC261 1P V ersion 1.0 87 7.6.7 Diagnostics In thi s page , user can let unit to ping other network equipment. And user also can monit or a route from unit to your target.
EnGenius E OC261 1P V ersion 1.0 88 Appendix A – FCC Interference Statement Fede r al Communication Commissi on Interf erence Sta tement This .
Multi-Function Gig abit Wireless-N C lient Bridge V ersion 1.0 89 Appendix B – IC Statement Industry Cana da stateme nt: This devi ce complies with RSS ‐ 210 of th e Industry Canada Rules.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il EnGenius Technologies EOC2611P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del EnGenius Technologies EOC2611P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso EnGenius Technologies EOC2611P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul EnGenius Technologies EOC2611P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il EnGenius Technologies EOC2611P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del EnGenius Technologies EOC2611P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il EnGenius Technologies EOC2611P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo EnGenius Technologies EOC2611P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.