Manuale d’uso / di manutenzione del prodotto BAR330 del fabbricante Emerson
Vai alla pagina of 27
BAR330 OWNER ’S MANUAL Barbie and associated trademarks and trade dr ess are owned by , and used under license from, Mattel, Inc. 2007 Mattel, Inc. All Rights Reserved.
1 Welcome...… Emerson Radio Corp. has produced this audio/video product under license from Mattel. We have taken great care to make sure your unit was in perfect working order when it left our factory . Thank you for purchasing this Compact Audio/Video System.
2 IMPORT ANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully . Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.
3 IMPORT ANT SAFETY INSTRUCTIONS (CONTINUED) 1 7 . OUTDOOR ANTENNA GROUNDING If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up st atic charges.
4 IMPORT ANT SAFETY INSTRUCTIONS (CONTINUED) Any use of the controls or an adjustment to the procedures other than those specified herein may result in hazardous radiation. T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE P AR TS INSIDE.
5 T able of Co nte nt s W arnings and Cautions Welcome .........................................................................1 UL Safety Instructions .................................................1-3 FCC Notice ..................................
6 LOCA TION OF CONTROLS AND INDICA TORS FRONT P ANEL 6.) STOP Button. Press to stop playback. 7.) PLA Y Button. Press to begin playback. 8 .) S tandby Button. Turns the system 'On/Off'. 9.) ST ANDBY LED Indicator . Lights up at standby mode.
7 BACK P ANEL 1.) AUDIO Out L/R Jacks. 2.) VIDEO Out Jack. 3.) COAXIAL Digital Out Jack. 4. ) AC Power Cord. 12 3 4 BARBIE BAR330_Eng P01-12.p65 2/2/2007, 3:34 PM 7.
8 REMOTE CONTROL 1.) CLEAR Button. 2.) POWER Button. 3. ) Numerical 0 – 9 Buttons. 4.) KEY LOCK Button. 5.) REV . Button. 6.) ANGLE Button. 7.) / / / Navigation/Skip Buttons. 8) SEARCH Button. 9.) SUBTITLE Button. 10.) TITLE/RETURN Button. 1 1.) AUDIO Button.
9 Power Cord Protection T o avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury , please observe the following: • Hold the plug firmly when connecting or disconnecting the AC power cord. • Keep the AC power cord away from heating appliances.
10 Features of This System • DVD player with Dolby Digit al * Audio output. • Compatible with DVD, CD-R/R W , KODAK PHOTO CDs and CD discs. • DVD navigation functions. • On screen display menu. • Full function remote control. * Manufactured under license from Dolby Laboratories.
0 11 TYPES of DISCS That Can be Played on This System This player can playback discs bearing any of the following marks: Note-1 • DVD players and discs are designed with region numbers which dictate the regions in which a disc can be played.
12 Notes on Discs Disc handling precautions • T o keep the disc clean, handle the disc by it s edge. Do not touch the surface. • Do not stick paper or tape on the disc. If there is glue (or a similar substance) on the disc, remove the glue completely before using the disc.
2 13 Battery inst allation ( Remote Control) The remote control requires one "button-type" 3-volt lithium battery , included. T o extend the life of the original battery we have inserted a small clear plastic spacer tab between the lithium battery and the battery terminal.
14 TV and Optional Component Connections Required cords • Video cord for connecting a TV set (included). • Audio cords (included). When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.
4 15 DVD Playback Preparations • Switch on the TV set power and select "Video" as the TV input. • Switch on the stereo system's power if the player has been connected to a stereo system. Basic Play 1. Pull open the vertical disc compartment.
16 Selecting a S tart Point using the Chapter Time Code Example: Viewing after 1 hour 3 minutes have elasped from the chapter start. 1. Press the SEARCH button thirdly during play .
6 17 Repeat sections between two specific point s (Repeat/A - B) 1. Press the REPEA T/A-B button during play at the point where repeat play is to commence (A). 2. Press the REPEA T/A-B button again at the point where repeat play is to be concluded (B).
18 Audio CD Playback Preparation • Switch on the TV set power and select "Video" as the TV input. • Switch on the stereo system's power if the player has been connected to a stereo system. Basic Play 1. Pull open the vertical disc compartment.
8 19 Settings and Adjustment s Once the initial setup has been completed, the player can always be operated under the same conditions. The settings will be retained in the memory , until the settings are changed. TV Display 1. Press the SETUP button to enter the Setup Menu.
20 On Screen Display Language 1. Press the SETUP button to enter the Setup Menu. 2. Use the ( , ) Navigation buttons to select General. 3. Use the ( , ) Navigation buttons to move the cursor to the OSD Lang item.
0 21 Dynamic 1. Press the SETUP button to enter the Setup Menu. 2. Use the ( , ) Navigation buttons to select Dolby . 3. Use the ( , ) Navigation buttons to move the cursor to the Dynamic item.
22 Other Functions This chapter describes how to use some functions contained in system. ZOOM 1. Press the ZOOM button to change the size of the screen between 2x, 3x, 4x, and off zoom. Common Procedure 1 . Press the DISPLA Y button repeatedly during play to display elapsed time of title, chapter , track, etc.
2 23 The disc does not play . • Insert a disc. • Insert the disc correctly with the playback side facing down on the disc tray . • Clean the disc. (see page 12) • The system cannot play CD-ROMs, etc. (see page 1 1) Insert a DVD or a CD disc. • Check the region code of the DVD disc.
24 The serial number of your system can be found on a label on the back panel of the main unit, and also on the display carton. Please record the serial number in the space below . Y ou may need to refer to this number if your system ever needs to be serviced.
4 25 EMERSON RADIO CORP . LIMITED W ARRANTY What does this warranty cover? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? For a period of ninety (90) days for labor and for a period of one (1) year for parts, from the date of original purchase in the U.
26 BAR330-020207-01 Printed in China BARBIE BAR330_Eng P13-26.p65 2/2/2007, 3:30 PM 26.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Emerson BAR330 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Emerson BAR330 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Emerson BAR330 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Emerson BAR330 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Emerson BAR330, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Emerson BAR330.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Emerson BAR330. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Emerson BAR330 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
