Manuale d’uso / di manutenzione del prodotto 3-9000-744 del fabbricante Emerson
Vai alla pagina of 66
Operation Manual Part Number: 3-9000 -744, Rev. F September 2013 Dan i e l TM Split Clamp Extrac tor T ool fo r SeniorSonic TM 4-Path G a s Ultrasonic Flow Me te rs.
.
Da n i el c us t o m er s er v i ce E-m a i l • Customer S er vice: tech.ser vice@emersonprocess.c om • Customer Suppor t: daniel.cst.suppor t@emerson.com • Asi a-P ac if ic : danielap .s uppor t@emerson.com • Europ e: Da nie lEMA.CST@EmersonProc ess.
Sign al word s and symbols u sed in this m anual Pay s pecial a tte ntion to the f ollowing signal words, saf et y aler t symbols and stateme nts : Saf ety aler t symbol This is a safety aler t symb ol. It is used to aler t you to po tential physical injur y hazards.
Impor t ant sa f et y instruc tions Daniel Me asure ment and Control, Inc. (Danie l) de signs, manuf ac tures and tests products to function within spec ific c onditions.
Product Operation Personnel: • T o prevent pe r sonal injur y , personnel must f ollow all instr uctio ns of this manual prior to and during operation of the pro duc t. • Follow all warnings, cautions, and no t ices m arked on, and supplied with, this product.
No tic e THE C ONTENTS OF THIS PUBLICA TION ARE PRESENTED FOR INF ORMA TIONAL PURPOSES ONL Y , AND WHILE EVERY EFFOR T HAS BEEN MADE T O ENS URE THEIR A CCURACY , THE Y ARE NO T T O BE C ONSTR UED AS W ARRANTIES OR GUARANTEES, EXPRE SSED OR IMPLIED , RE G ARDING THE PR ODUCTS OR SERVICES DESCRIBED HEREIN OR THEIR USE OR APPLICABILIT Y .
W arran t y and Limit ations 1. LIMITED W ARRANT Y: S ubject to the limit ations contained in Sec tion 2 herein, Danie l Mea sureme nt & Control, Inc.
Operation Manual Table of Contents 3-9000-744 Rev F September 2013 Table of Contents i Co ntents Preface Danie l custome r ser vice Signal w ords and symbol s us ed in this manu al Impor tant safe t y instructions Notic e W arrant y and Limit ations Section 1: Introduction 1.
ii Table of Contents Table of Contents Operation Manual September 2013 3-9000-744 Rev F.
Operation Manual List of Tables 3-9000-744 Rev F September 2013 List of Tables iii List o f T able s T able 1-1 Daniel extractor tool specifications .. ........... ........... ............ ........... .............. ........... ........... . 5 T able 3-1 Extractor tool list for T-sl ot extractable trans d ucers .
iv List of Tables List of Tables Operation Manual September 2013 3-9000-744 Rev F.
Operation Manual List of Figures 3-9000-744 Rev F September 2013 List of Figures v List o f Figures Figure 1-1 J-mount transducer identifica tion ............. .............. ........... ........... ............ .............. ...... 1 Figure 1-2 J-mount transducer identifica tion .
vi List of Figures List of Figures Operation Manual September 2013 3-9000-744 Rev F.
Operation Manual Section 1: Introduction 3-9000-744 Rev F September 2013 Overview 1 11 12 13 14 15 16 Sec tion 1: Introduc tion 1.1 Ove r view The Daniel Ultrasonic Split Cl amp Ex tractor T ool is designed for use on Daniel Se niorSonic TM 4 Path Ga s Ultra sonic Me ters only .
2 Overview Section 1: Introduction Operation Manual September 2013 3-9000-744 R ev F Figure 1-2 J-moun t transducer identification A. A. M ount identification (serial num ber , length, purchase order number and style) B.
Operation Manual Section 1: Introduction 3-9000-744 Rev F September 2013 Overview 3 Daniel Ultra sonic meters with M -mount (150 ANSI to 600 ANS I) or P-mount (900 ANS I to 1500 AN SI) T - slot transducer holde rs are not designed f or the Split Clamp Extrac tor T ool and this manual does not appl y to these mount st y les.
4 Extractor tool specifications Section 1: Introduction Operation Manual September 2013 3-9000-744 R ev F 1.2 Ex tractor tool spec ifications The Danie l Extrac tor T ool is available in two ANSI pressur e rating s, 600 and 1500. The pres sure rating is stamped on the Lubrica tor ch ambe r asse mbly flange (item M, drawing D-08248).
Operation Manual Section 1: Introduction 3-9000-744 Rev F September 2013 Extractor tool specifications 5 Figure 1-5 Split clamp extractor t ool asse mbly dime nsions (inc hes) T able 1-1 Daniel extrac.
6 Extractor tool pre-use and post-use inspection Section 1: Introduction Operation Manual September 2013 3-9000-744 R ev F 1.3 Ex tractor tool pre-use and post -use inspec tion Pri or to a nd af ter usin g the ex t rac to r too l, th e fo llowing inspection procedure mu st be follo wed: R ef er to drawing D -08248 Detail D ( see Appendix C ).
Operation Manual Section 1: Introduction 3-9000-744 Rev F September 2013 Extractor tool pre-use and post-use inspection 7 6. Use US M Ex trac tor T ool pre-use and post -use Inspection checklist ( see A ppendix B ) to log the inspection and to report any issues found .
8 Extractor tool pre-use and post-use inspection Section 1: Introduction Operation Manual September 2013 3-9000-744 R ev F.
Operation Manual Section 2: Operation preparation an d part replacemen t notes 3-9000-744 Rev F September 2013 Operation preparation 9 21 Sec tion 2: Opera tion prep aration and par t r ep la cem ent n ote s 2.
10 Operation preparation Section 2: Operation preparation and pa rt replacement notes Operation Manual September 2013 3-9000-744 R ev F Import ant safety information SURF AC E TEMPERA TURE HAZ ARD Meter body and piping may be extremely hot or cold. W ear per sonal protective equipment when coming in contact with the meter .
Operation Manual Section 2: Operation preparation an d part replacemen t notes 3-9000-744 Rev F September 2013 Operation preparation 11 4. Oral communication mu st be established prio r to de pressurizing the line, if required. 5. Enough lighting to see the gauge is re quire d prio r to ex t rac tor too l usage.
12 Part replacement notes Section 2: Operation preparation and pa rt replacement notes Operation Manual September 2013 3-9000-744 R ev F 2.2 Part replacement note s 1. The foll owing instructions are f or remov al and install ation o f one transduc er asse mbly (J).
Operation Manu al Section 3: Tool re quirements 3-9000-744 Rev F September 2013 Tool list for the extractor tool with T-slot extractable transducers 13 S e c t i o n 3 : T o o l r e q u i r em ent s 3.1 T ool list for the extractor tool with T -slot ex tractable transducers 1 Molyk ote III is a trade mark of Dow C orning Co rporatio n, U.
14 Tool list for the extractor tool with T-slot extractable transducers Section 3: Tool require ments Operation Manual September 2013 3-9000-744 R ev F.
Operation Manu al Section 4: Re moving a tr ansducer assembl y 3-9000-744 Rev F September 2013 Steps to remove a transducer assembly from a meter while the meter is und er line pressure 15 41 Sec t ion 4: R e moving a transduc e r a sse mbly 4.1 St eps to remo ve a transduc er assembly from a meter while the meter is under line pressure 1.
16 Steps to remove a transducer assembly from a meter while the meter is under line pressure Section 4: Removing a t ransd ucer assembly Operation Manual September 2013 3-9000-744 R ev F 3. Ref er to Dra wing CE-21062 DET AIL “C” ( Appendix C ). a.
Operation Manu al Section 4: Re moving a tr ansducer assembl y 3-9000-744 Rev F September 2013 Steps to remove a transducer assembly from a meter while the meter is und er line pressure 17 4. Ref er to Drawing CE -21063 DET AIL “D” ( Appendix C ).
18 Steps to remove a transducer assembly from a meter while the meter is under line pressure Section 4: Removing a t ransd ucer assembly Operation Manual September 2013 3-9000-744 R ev F d.
Operation Manu al Section 4: Re moving a tr ansducer assembl y 3-9000-744 Rev F September 2013 Steps to remove a transducer assembly from a meter while the meter is und er line pressure 19 6. Ref er to Dra wing CE-21064 DET AIL “E” ( Appendix C ).
20 Steps to remove a transducer assembly from a meter while the meter is under line pressure Section 4: Removing a t ransd ucer assembly Operation Manual September 2013 3-9000-744 R ev F f. Adjust the pressure on the e xtrac tor tool piston assembly (P) to exc eed the forc e of line pre ssure ex er ted on the extrac tor rod (N).
Operation Manu al Section 4: Re moving a tr ansducer assembl y 3-9000-744 Rev F September 2013 Steps to remove a transducer assembly from a meter while the meter is und er line pressure 21 i. V erif y all pressure h as been v ented from the extractor tool pist on asse mbly (P) by reading the piston pressure gauge (U).
22 Steps to remove a transducer assembly from a meter while the meter is under line pressure Section 4: Removing a t ransd ucer assembly Operation Manual September 2013 3-9000-744 R ev F m. T o check the sealing inte grit y of the ex trac tor tool valv e as sembly (H), clos e the lubricator chambe r vent valve (R).
Operation Manu al Section 4: Re moving a tr ansducer assembl y 3-9000-744 Rev F September 2013 Steps to remove a transducer assembly from a meter while the meter is und er line pressure 23 b.
24 Steps to remove a transducer assembly from a meter while the meter is under line pressure Section 4: Removing a t ransd ucer assembly Operation Manual September 2013 3-9000-744 R ev F g.
Operation Manu al Section 5: I n stalling a tr ansducer assembl y 3-9000-744 Rev F September 2013 Installing a transducer assembly while the meter is under line pressure 25 51 Sec tion 5: Inst alling a transduce r a sse mbly 5.1 Installing a transducer assembly while the met er is under line pressure 1.
26 Installing a transducer assembly while the meter is under line pressure Section 5: Installing a transduc er assembly Operation Manual September 2013 3-9000-744 R ev F d. Al ign the e x tr ac tor ro d (N ) into t he center ho le of t he p iston of th e ex t rac tor tool piston a sse mbly (P).
Operation Manu al Section 5: I n stalling a tr ansducer assembl y 3-9000-744 Rev F September 2013 Installing a transducer assembly while the meter is under line pressure 27 3.
28 Installing a transducer assembly while the meter is under line pressure Section 5: Installing a transduc er assembly Operation Manual September 2013 3-9000-744 R ev F e. Adjust the pressure on the e x trac tor tool piston asse mbly (P) to slightly exceed the force of line pressure ac ting on th e ex tra cto r rod (N).
Operation Manu al Section 5: I n stalling a tr ansducer assembl y 3-9000-744 Rev F September 2013 Installing a transducer assembly while the meter is under line pressure 29 h. V ent the pres sure of the extrac tor tool piston a ssembly (P) b y fully unscrewing (coun terc l ock wise) the adjustmen t screw of the pressure regula tor (V) until loose .
30 Installing a transducer assembly while the meter is under line pressure Section 5: Installing a transduc er assembly Operation Manual September 2013 3-9000-744 R ev F 4. Ref e r to Drawing D-08248 ( Appendix C ). a. Remov e the m ete r housing quick connect ste m and the reducer if it wa s required.
Operation Manu al Section 5: I n stalling a tr ansducer assembl y 3-9000-744 Rev F September 2013 Installing a transducer assembly while the meter is under line pressure 31 8.
32 Installing a transducer assembly while the meter is under line pressure Section 5: Installing a transduc er assembly Operation Manual September 2013 3-9000-744 R ev F.
Operation Manu al Section 6: Main tenance 3-9000-744 Rev F September 2013 Extractor tool maintenance 33 61 Sec tion 6: Main te nanc e 6.1 Ex tractor tool maint enance The Split Clamp Extractor T ool m.
34 Extractor tool maintenance Section 6: Maintenance Operation Manual September 2013 3-9000-744 R ev F.
Operation Manual Section 7: Parts list 3-9000-744 Rev F September 2013 Extractor tool parts list 35 Sec tion 7: Par ts list 7.1 Ex tractor tool par ts list T able 7-1 Ex tractor tool parts list Parts .
36 Extractor tool parts list Section 7: Parts list Operation Manual September 2013 3-9000-744 R ev F.
Operation Manual Appendix A: Piston and line pressure 3-9000-744 Rev F September 2013 Extractor tool piston pressure 37 A Appe ndix A: Piston and line pre ssure A .
38 Extractor tool piston pressure Appendix A: Piston and line pressure Operation Manual September 2013 3-9000-744 R ev F 1525 6 1 2025 8 1 2525 1 01 1550 6 2 2050 8 2 2550 1 02 1575 6 3 2075 8 3 2575 .
Operation Manual Appendix B: Extractor tool pre-use and post-use in spection checklist 3-9000-744 Rev F September 2013 Inspection checklist 39 B1TOP (14) Appe ndix B: Ex trac t or tool pre-u se and post -u se inspec tion ch ecklist B.
40 Inspection checklist Appendix B: Extractor tool pre-use and post-use inspecti on checklist Ope ration Manual September 2013 3-9000-744 R ev F Note s:.
Operation Manual Appendix C: Engineering drawings 3-9000-744 Rev F September 2013 Extractor tool drawings 41 AC1ALK TO HER.TOP ( 14) Appe ndix C: Engineering dra w ing s C .
42 Extractor tool drawings Appendix C: Engineering drawings Operation Manual September 2013 3-9000-744 R ev F.
.
.
.
.
.
.
.
.
.
3-9000-744 Revision F 2013 This product is a core component of the Plant Web digital plant archit ecture. Emerson Process Management Daniel Measurement and Control, Inc. 11100 Brittmoore Park Drive Houston, TX 77041 USA T +1 713-467-6000 F +1 713-827-4805 USA Toll Free 1 888-356-9001 Daniel Measurement Services, Inc.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Emerson 3-9000-744 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Emerson 3-9000-744 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Emerson 3-9000-744 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Emerson 3-9000-744 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Emerson 3-9000-744, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Emerson 3-9000-744.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Emerson 3-9000-744. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Emerson 3-9000-744 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
