Manuale d’uso / di manutenzione del prodotto Santo 1573TK-4 del fabbricante Electrolux
Vai alla pagina of 24
ÖKO-SANTO SUPER Automatic Refrigerator Santo 1573TK-4 Operating Instructions.
2 Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference.
3 Contents Safet y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4 Disposa l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance Packaging Informatio n .
4 1 Safety The safety aspects of our refrigerators/freezers comply with accepted technical standards and the German Appliance Safety Law. Nevertheless, we consider it our obligation to make you aware of the following safety information: Intended use • The refrigerator is intended for use in the home.
Safety 5 themselves in the fridge when playing (there is risk of suffocation!) or get themselves into other dangerous situations. • Often children cannot recognise the hazards present in household appliances.
6 Disposal Appliance Packaging Information All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger! About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.
7 3 You can remove any remnants of adhesive using white spirit. 0 Remove all adhesive tape and packing pieces from the interior of the appliance. Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temperature.
Installation 8 Your refrigerator needs air The refrigerating unit of your refrigerator is designed for maintenance- free operation. What it should never lack is good ventilation. Air is sup- plied under the door through the ventilation slot between the refriger- ator an storage surface.
Installation 9 Mounting under a continuous worktop If installed under a continuous worktop, the appliance is fastened with a mounting screw (A) under the panel. Rehingeing the door The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires.
Installation 10 0 Unscrew the handle. Refit it on the opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack. Changing over the freezer compartment door 0 Open the freezer compartment door a little way.
11 Prior to Initial Start–Up 0 Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
12 Plug socket The plug socket necessary for con- nection of your appliance to the electricity supply should be positio- ned so that it is possible to pull out the appliance plug. If your appliance is installed under a continuous worktop, the plug socket should be provided as shown.
13 If you require a lower temperature, select setting „3“ or „4“. On this setting, you can be sure the fresh food will be reliably frozen and that a storage temperature of -18°C will be maintained in the freezer compartment.
14 VARIO glass storage shelf Your appliance is equipped with two half size glass storage shelves. Storing tall items: 0 Slide the front half of the Vario storage shelf in another level to the rear. By this means you will gain space to place tall items on the storage shelf below.
15 Freezing and storing frozen food The freezer compartment is for freezing and storing food. Important! • The temperature in the freezer compartment must be –18 °C or col- der before freezing food or storing food already frozen. • Do not freeze too large a quantity at any one time (max.
16 Preparation of Ice Cubes 0 Fill the ice cube tray 3/4 full with cold water, place it in the freezer compartment and leave to freeze. 0 To loosen the frozen cubes, either bend the ice cube tray or hold it under running water for a few seconds.
17 0 Switch off the appliance and unplug it, or pull the fuse or switch off the circuit breaker. 0 Remove the stopper from the melt- water outlet and place a bowl underneath it to catch the melt- water. Tip: You can speed up the defrosting process by placing a pan with hot water in the freezer compartment and closing the doors.
18 Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. 1 Warning! • The appliance may not be connected to the mains during cleaning.
19 0 Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the green peg in the pack of accessories included with the appliance. 0 After everything is dry place appliance back into service. 2 Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of warmth.
20 What to do if ... Correcting Malfunctions Spare parts: Minor repairs you can carry out yourself, spare parts can be ordered from the service centre.
What to do if ... 21 The food is too warm. Temperature is not properly adjusted. Please look in the "Initial Start Up" section. Door was open for an extended period. Open the door only as long as necessary. A large quantity of warm food was placed in the appliance within the last 24 hours.
What to do if ... 22 Changing the light bulb 1 Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker. Light bulb data: 220-240 V, max. 15 W 0 To switch off the appliance, turn the temperature regulator to position "0".
23 Customer Service If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department. Addresses and telephone numbers are listed in the accompanying booklet "Guarantee Conditions/Customer Service Locations".
AEG H ausgeräte G m bH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG H 271 286 200 –01-0298 2222 649-51.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Electrolux Santo 1573TK-4 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Electrolux Santo 1573TK-4 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Electrolux Santo 1573TK-4 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Electrolux Santo 1573TK-4 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Electrolux Santo 1573TK-4, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Electrolux Santo 1573TK-4.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Electrolux Santo 1573TK-4. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Electrolux Santo 1573TK-4 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
