Manuale d’uso / di manutenzione del prodotto JLBIDW1200 del fabbricante Electrolux
Vai alla pagina of 32
JLBIDW1200 Dishwasher Instruction manual.
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, o.
• Keep all packaging well away from children. There is a risk of suffocation. • Keep all detergents in a safe place out of children’s reach. • Keep children well a way from the dishwasher when th e door is open. Correct use • This dishwasher is only intended for washing household utensils suitable for machine washing.
• Do not use more deterge nt, dishwasher salt and rinse aid tha n is recommended in these operating instructions and by the manufacturer of the respective product. • Delay start: When possible programme your dishwasher to run over night, to enable, for example, the use of economical overnight electricity tariffs.
Contents For the user Important safety information 2 Description of the appliance 6 Optical signal 6 The control panel 7 The digital display 7 Function buttons (A, B, C, D and E) 7 Audible signals 8 W.
Description of the appliance 1. Upper basket 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Rinse aid dispenser 6. Rating plate 7. Filters 8. Lowe r spray arm 9. Uppe r spray arm Optical signal Once the washing programme starts, a point- shaped optical signal shows on the floor beneath the appliance door.
The control panel D E 1. On/Off bu tton 2. Digital display 3. Programme selection button s 4. Delay start button 5. Indicator lights 6. Function buttons Indicator lights In addition to the programme i.
• Cancelling a washing progra mme or a delay start in progress, • Activation/deactivation of the Multi tab function, • Activation/deactivation of the rinse aid dispenser when Multi tab function is active, • Activation/deactivation of the audible signals.
Washing programmes Programm e Degree of soil Type of load Programme description Consumption values 1) Prewash Main wash 2) Intermediate rinse Final rinse Drying Duration (in minutes) 3) Energy (in kWh.
When the dishwasher is first installed Before using your dishwasher fo r the first time: • Ensure that the e lectrical and water connections comply with the installation instructions • Remove all .
Water hardness Adjusting the water hardness setting Use of salt Clarke °TH mmol/l manually electronically 5 - 12 7 - 18 0,7 - 1,8 1 level 2 yes < 5 < 7 < 0,7 1 level 1 no Setting the water softener The water softener must be set in two ways: manually, using the water hardn ess dial and electronically.
Filling with dishwasher salt Warning! Only use salt specifically designed for u se in dishwa shers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the comple te washing progra mmes.
2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds abo ut 110 ml of rinse aid, which is sufficien t for between 16 and 40 dishwashing cycles, depending upon the dosage setting. 3. Ensure that th e lid is closed afte r every refill.
Daily use • Check if it's necessary to refill with dishwasher sa lt or rinse aid. • Open the door and slide out the baskets to load the dishes. • Load cutlery and dishes into the dishwasher. • Fill with dishwasher detergent. • Select a wash programme su itable for the cutlery and dishes.
The lower basket The lower bas ket is des igned to tak e saucepans, lids, plates, salad bowls, cu tlery, etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. The two rows of prongs in the lower basket can lie flat to allow you to load pots, pans and bowls.
If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handle s facing upwards. Mix spoons with other cu tlery to prevent them from sticking togethe r. For best results we recommend you use the cutlery grids.
Maximum heig ht of the di shes in the lower baske t With upper basket raised 31 cm With upper basket lowered 27 cm To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
20 = approximately 20 g of detergen t 30 = approximately 30 g of detergen t 3. All programmes with pre wash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will be used during the prewash phase.
Multi tab function This appliance is equipped wi th the Multi tab function, that allows the use of combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions.
4. To change the setting, press function button B again, the digital displa y shows the new setting 5. To memorize the operation, switch off the dishwasher by pressing the On/off button. If you decide to revert back to the use of individual detergents we advise that you: 1.
Cancelling a delay start or a washing programme in progress • Simultaneously press and hold the two programme buttons positioned over the word Cancel, until all the programme button lights come on. • Cancelling a delay start involves also the cancelling of the washing programme set.
Maintenance and cleaning Cleaning the filters The filters must be che cked and cleane d from time to time. Dirty filters will degrade the washing result. Warning! Before cleaning the filters ensure that the machine is switched off. 1. Open the door, remove the lower basket.
8. Place the coarse filter (A) in the microfilter (B) and press toge ther. 9. Put the filter combination in place and lock by turning the handle clockwise to th e stop. During this process ensure that the flat filter does not protrude ab ove the base of the wa shing compartment.
Switch off the appliance and carry out the following suggested corrective actions. Important! If you call out an engine er to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
The wash results are not satisfactory The dishes are not clean • The wrong programme has been selected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. • The spray arms do not rota te freely due to incorrect arrangement of the load.
Technical data Dimensions Widt h Height Depth 59,6 cm 81,8 - 89,8 cm 55,5 cm Electrical connection - Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.
Levelling Good levelling is essential for correct closure and sealing of the door. Wh en the appliance is correctly levelled, the door will not catch on either side of the cabinet. I f the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
Ensure the drain hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a dra in hose extension its inte rnal diameter must be no smaller than the diameter of the hose provided.
Electrical connection Warning! Safety standards require the appliance to be ea rthed. Prior to using the appliance for the first time, ensure that the rate d voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed.
4. The purchase date (found on your receipt). 5. The model a nd serial number of the appliance (found on the rating plate). So that you always have these numbers at hand, we recommend that you make a note of them here : Mod. : . . . . . . . . . . . . .
31.
John Lewis Partne rship 171 Victoria Street London SW1E 5NN www. johnlewis.com 117963430 - 00 - 072007 - Subject to change without notice.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Electrolux JLBIDW1200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Electrolux JLBIDW1200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Electrolux JLBIDW1200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Electrolux JLBIDW1200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Electrolux JLBIDW1200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Electrolux JLBIDW1200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Electrolux JLBIDW1200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Electrolux JLBIDW1200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
