Manuale d’uso / di manutenzione del prodotto 1595 del fabbricante Alamo
Vai alla pagina of 102
© 201 1 Alamo Group Inc. $0.00 1595 Published 01/1 1 Part No. F-4124C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com LOADER This Operator' s Manual is an integral p art of th e safe operation of this machine an d must be maint ained with the un it at all times.
T o the Owner/Operator/Dealer All implement s with moving part s are potentially ha zardous . There is no subs titute for a c autious , safe-minded operator who recognizes the potential hazards and follows reason able safety practices.
T able of Content s SAFETY SECTION ... .................................................................. ................... 1-1 General Safety Instructions and Practic es ................ ................ ................ .................... ......
Loader Storage ..................... ................. ................ ................ ................ ................ .......... ................ ............... 4-37 Transporting the Tractor and Implement ................ ................... ...
Safety Section 1-1 SAFETY SECTION.
SAFETY 1595 01/11 Safety Section 1-2 © 201 1 Alamo Group Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor .
SAFETY 1595 01/11 Safety Section 1-3 © 201 1 Alamo G roup Inc. SAFETY Never allow children to operate, ri de on, or come close to the T ractor or Implement.
SAFETY 1595 01/11 Safety Section 1-4 © 201 1 Alam o Group Inc. SAFETY Operator Safety Inst ructions and Practices Never operate the T ractor or Implement until you h ave read and completely under stand th is Manual, the T ractor Operator ’s Manual, an d each of the Safety Messages found in the Manual or on the T ractor and Implement.
SAFETY 1595 01/11 Safety Section 1-5 © 201 1 Alamo G roup Inc. SAFETY Prolonged oper ation may cause ope rator bor edom and fa tigue affe cting safe operation. T ake scheduled work breaks to help prev ent these p otentially impaire d operating conditions.
SAFETY 1595 01/11 Safety Section 1-6 © 201 1 Alam o Group Inc. SAFETY Equipment Operation Safety In structions and Practices This Implemen t may be wider than the T ractor .
SAFETY 1595 01/11 Safety Section 1-7 © 201 1 Alamo G roup Inc. SAFETY DO NOT operate this Implement o n a T ractor that is not properly maint ained. Should a mechanical or Tractor control failu re occur while operating, immediately shut down the T ractor and perform rep airs before resuming operatio n.
SAFETY 1595 01/11 Safety Section 1-8 © 201 1 Alam o Group Inc. SAFETY Do not let the lo ader or att achment cont act electrical power line s. Conta ct with electrical power lines can result in serious injur y or electrocution. If the loader attach ment contact s a power line remain in the tractor seat until the power has been shu t off.
SAFETY 1595 01/11 Safety Section 1-9 © 201 1 Alamo G roup Inc. SAFETY Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s.
SAFETY 1595 01 /11 Safety Section 1-10 © 201 1 Alam o Group Inc. SAFETY Know before you DIG . Call 88 8-258-0808 and reques t that all buried utilities locations be identified before digging in un familiar ground. Do not let the loader or attachment contact buried electrical power lines, ut ilities or gas lines.
SAFETY 1595 01/11 Safety Section 1-11 © 201 1 Alamo G roup Inc. SAFETY Never leave the Implement a nd Power Unit unattended while the Implement is in the raised position.
SAFETY 1595 01 /11 Safety Section 1-12 © 201 1 Alam o Group Inc. SAFETY Connecting or Disconnecting Im plement Safety Instructions and Practices Do not stand or allow byst ander or coworkers between the loader and the tractor while installing or disconnecting the loader from the tractor .
SAFETY 1595 01/11 Safety Section 1-13 © 201 1 Alamo G roup Inc. SAFETY T ransporting Safety Instructions and Practices T ransport only at speeds where you can maint ain control of the equipment. Seriou s accident s and injuries ca n result from operating this equipment at high sp eeds.
SAFETY 1595 01 /11 Safety Section 1-14 © 201 1 Alam o Group Inc. SAFETY Maintenance and Service Saf ety Instructions and Practices Lower the loader to th e bed of the truck or tra iler when transporting the tractor and loader with a truck. Measure to ensure the tr ansport height does not exceed the legal limit s.
SAFETY 1595 01/11 Safety Section 1-15 © 201 1 Alamo G roup Inc. SAFETY Never work under the Imp lement, the framework, or an y lifted compo nent unless the Implement is secure ly supported or blocked up to prevent sudden or inad vertent falling which could caus e serious injury or even death.
SAFETY 1595 01 /11 Safety Section 1-16 © 201 1 Alam o Group Inc. SAFETY S torage and Parking Safety Instructions and Practices Concluding Safety In structions and Practices Avoid contact with hot su rfaces of the engine or muf fler . Use gloves and eye p rotection when servicing hot component s.
SAFETY 1595 01/11 Safety Section 1-17 © 201 1 Alamo G roup Inc. SAFETY Decal Location NOTE: Rhino supplies safety deca ls on this product to promote safe operatio n.
SAFETY 1595 01/1 1 Safety Section 1-18 © 201 1 Alam o Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 49696 1 LOGO Rhino, Left 2. 51448 1 LOGO Rhino, Right 3. 53469 2 MODEL 15 5 4. 52740 1 W ARNING Oil Leaks 5. 52203 1 W ARNING Lock V alve in Transpor t 6.
SAFETY 1595 01/11 Safety Section 1-19 © 201 1 Alamo G roup Inc. SAFETY Decal Description Rhino, Le ft P/N 49696 Rhino, Right P/N 51448 1595 P/N 53469.
SAFETY 1595 01 /11 Safety Section 1-20 © 201 1 Alam o Group Inc. SAFETY W A RNING! - DO NOT operate with oil leaks. -Inspect hoses regularly . Failure to inspect and replace worn hoses may allow th em to rupture suddenly and violently , resulting in serious bodily inju ry or death from scalding, fire burn injury , or oil penetration.
SAFETY 1595 01/11 Safety Section 1-21 © 201 1 Alamo G roup Inc. SAFETY Loader Safety -Read, understand and follow the operation, warning , and safety instruction s in the Operator ’s Manual. -Equip tractor with ROPS (Ro ll Over Protection System) before installing or operati ng the loader .
SAFETY 1595 01 /11 Safety Section 1-22 © 201 1 Alam o Group Inc. SAFETY DANGER! - Use ROPS and seatbelt at all times. Add recommende d rear ballast. Operate tr actor at low speeds. Failure to comp ly may result in serious injury or death. D470 Read Operato r ’s Manual! The operator’s manual is located inside this canister .
SAFETY 1595 01/11 Safety Section 1-23 © 201 1 Alamo G roup Inc. SAFETY W AR NING! - Crushing Hazard. -T o A v oid Serious Injury or Death Make sure attachment is securely attached to the loader . See Operat or ’s Ma nual for inst ructions. -Lock both levers down.
SAFETY 1595 01 /11 Safety Section 1-24 © 201 1 Alam o Group Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations concern ing employer and employee eq uipment operators.
Introduction Section 2-1 INTRODUCTION SECTION.
INTRODUCTION 1595 01/11 Introduction Section 2-2 © 201 1 Alam o Group Inc. INTRODUCTION This 1595 Loader is des igned with care and built with quality materials by skilled workers. Proper assembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machine.
INTRODUCTION 1595 01/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the eq uipment safely .
INTRODUCTION 1595 01/11 Introduction Section 2-4 © 201 1 Alam o Group Inc. INTRODUCTION The RHINO 1595 L oader is designed fo r four-wheel drive tractors. They are intended to lif t only loose materials that will fit in the bucket. All cylinders are double-acti ng.
Assembly Section 3-1 ASSEMBL Y AND CONNECTING THE LOADER SECTION.
ASSEMBLY 1595 01/11 Assembly Section 3-2 © 201 1 Alam o Group Inc. ASSEMBL Y Dismounting and Mounting Mid-Mount Loader T o avoid injury during installati on of loader , do not allow bystanders with in 10 feet of loader or attachment . Always have a heavy att achment, such as a bu cket mounted on loader when it is removed from tractor .
ASSEMBLY 1595 01/11 Assembly Section 3-3 © 201 1 Alam o Group Inc. ASSEMBL Y Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s.
ASSEMBLY 1595 01/11 Assembly Section 3-4 © 201 1 Alam o Group Inc. ASSEMBL Y Proper Rear Ballastin g and Wheel Sp acing S pread fro nt wheels to maximum distance. S pread rear wheels to maximum dis tance. Add rear wheel weight, rear ballast box or implement.
ASSEMBLY 1595 01/11 Assembly Section 3-5 © 201 1 Alam o Group Inc. ASSEMBL Y Dismounting the Loader 1. Locate tractor and loader on firm level groun d. 2. With bucket raised above ground, tilt bucket down approximately 30 degree s from level. 3. Lower boom by retracting lift cylinders to lif t tractor front e nd (tires can be of f ground).
ASSEMBLY 1595 01/11 Assembly Section 3-6 © 201 1 Alam o Group Inc. ASSEMBL Y Mounting Loader Mounting is basically reve rse of dismo unting. T o avoid injury during installation of the load er attachment, do not allo w bystanders with in 10 feet of load er or attachment .
ASSEMBLY 1595 01/11 Assembly Section 3-7 © 201 1 Alam o Group Inc. ASSEMBL Y Assembling Quick Att ach Device Quick attach device can be installed using tools ordinarily available . T orque all hardware to spec ifications listed in loader operator’s manual.
ASSEMBLY 1595 01/11 Assembly Section 3-8 © 201 1 Alam o Group Inc. ASSEMBL Y Connecting the Att achment When Connecting an Att achment to the Loader Quick Hitch 1. Be sure both quick hitch pin levers are in the unlocked position, with th e levers pointing up.
ASSEMBLY 1595 01/11 Assembly Section 3-9 © 201 1 Alam o Group Inc. ASSEMBL Y 5. On level g round, tilt the attachment down 90 degrees and lower it to the ground. Lower the lo ader further to slightly raise the front of th e tractor of the tractor off the ground.
ASSEMBLY 1595 01/11 Assembly Section 3-10 © 201 1 Alam o Group Inc. ASSEMBL Y Att aching V alve Mounting & V alve 1. Attach valve mounting st and on inside of right mi d mount using M1 0 x 45 mm bo lts, lockwashers, and hex nuts. 2. Attach valve to valve mounting st and with M8 x 50 mm bolts, lockwashers, and hex nuts.
ASSEMBLY 1595 01/11 Assembly Section 3-11 © 201 1 Alam o Group Inc. ASSEMBL Y Plumbing Loader to Control V alve 1. Install Ho ses onto boom oil tube s. Install and tighten one at a time from the bottom up. Loosenin g the closest oil line clamp w ill ease installation.
.
Operation Section 4-1 OPERA TION SECTION.
OPERATION 1595 01/11 Operation Section 4-2 © 201 1 Alam o Group Inc. OPERA TION RHINO 1595 LOADER OPERA TION INSTRUCTIONS Y our 1595 Load er should now be assembled and insp ected for a ny evidence of defective or damaged pa rts before use. Any evidence of damage sh ould be reported to your dealer imme diately .
OPERATION 1595 01/11 Operation Section 4-3 © 201 1 Alam o Group Inc. OPERA TION 1. S t andard Equipment and Specifications • Capab le of lifting a s much as 1,655 pounds of ma terial to a maximum height o f 1 12”, the 1500 Series Loaders from Rhino ma ximize the value of your tractor by helping with a wide range of job s.
OPERATION 1595 01/11 Operation Section 4-4 © 201 1 Alam o Group Inc. OPERA TION 2. Operator Requirement s DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement.
OPERATION 1595 01/11 Operation Section 4-5 © 201 1 Alam o Group Inc. OPERA TION Never run the T ractor engine in a closed building or without adequate ventilation.
OPERATION 1595 01/11 Operation Section 4-6 © 201 1 Alam o Group Inc. OPERA TION 3. T ractor Requirement s Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION 1595 01/11 Operation Section 4-7 © 201 1 Alam o Group Inc. OPERA TION T ractor Req uirement s and Capabilities • ASABE approved Roll-Over Protective S tru cture (ROP S) or RO PS cab and seat belt. • T ractor Saf ety Devices ............
OPERATION 1595 01/11 Operation Section 4-8 © 201 1 Alam o Group Inc. OPERA TION 4. Getting On an d Off the T ractor 4.1 Boarding the T ractor T o ens ure tractor stab ility when operating add wheel ballast or rear weights to rear trac tor tires. For better stability , use tractor with wide front axle rather than tricycle fron t wheels.
OPERATION 1595 01/11 Operation Section 4-9 © 201 1 Alam o Group Inc. OPERA TION 4.2 Dismounting the T ractor Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) Never grasp control levers wh en mounting the machine.
OPERATION 1595 01/11 Ope ration Section 4-10 © 201 1 Alam o Group Inc. OPERA TION 5. St arting the T ractor Never run the T ractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your hea lth. (SG-23) S tart tractor only when pr operly seated in the T ractor seat.
OPERATION 1595 01/11 Ope ration Section 4-11 © 201 1 Alam o Group Inc. OPERA TION 5.1 Pre-Operation Inspection and Service Periodically inspect all moving part s for wear and replace whe n necessary with au thorized service part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings.
OPERATION 1595 01/11 Ope ration Section 4-12 © 201 1 Alam o Group Inc. OPERA TION 5.3 Loader Pre-Operation Inspection/Service Before operation, a complete inspection and ser vice is required to ensur e the loader is in a good a nd safe working condition.
OPERATION 1595 01/11 Ope ration Section 4-13 © 201 1 Alam o Group Inc. OPERA TION The operator’s manual and safety signs af fixed on the unit contain important instru ctions on the saf e and proper use of the equi pment.
OPERATION 1595 01/11 Ope ration Section 4-14 © 201 1 Alam o Group Inc. OPERA TION HYDRAULIC LINE INSPECTION • Check for hydraulic le aks along hoses, cylinders and fittings. IMPORT ANT : DO NOT use your hands to check for oil leaks. Use a piece of heavy p aper or cardboard to check for hydraulic oil leaks.
OPERATION 1595 01/11 Ope ration Section 4-15 © 201 1 Alam o Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#______________________ Make____________________ Date__________________.
OPERATION 1595 01/11 Ope ration Section 4-16 © 201 1 Alam o Group Inc. OPERA TION FRONT END LOADER PRE- OPERA TION Inspection Front End Loader ID#_______________Make____________________ Date_________.
OPERATION 1595 01/11 Ope ration Section 4-17 © 201 1 Alam o Group Inc. OPERA TION 6. Driving the T ractor and Loader This Implemen t may be wider than the T ractor .
OPERATION 1595 01/11 Ope ration Section 4-18 © 201 1 Alam o Group Inc. OPERA TION Safe tractor transport requ ires the operator possess a thorough knowledge o f the model being op erated and precautions to t ake while driving with an attached imp lem ent.
OPERATION 1595 01/11 Ope ration Section 4-19 © 201 1 Alam o Group Inc. OPERA TION 6.3 Driving the T ractor and Loader 6.4 Operating the T r actor and Loader Do not attempt to lift loa ds in excess of loader capacity . Operating loader on a hillsid e is dangerous.
OPERATION 1595 01/11 Ope ration Section 4-20 © 201 1 Alam o Group Inc. OPERA TION The Boom is designed only to position and operat e the Bucket which is attached to it. Never attempt to lift, pull, or push ot her solid object s with the boom or bucket.
OPERATION 1595 01/11 Ope ration Section 4-21 © 201 1 Alam o Group Inc. OPERA TION Carry the loader and att achment low when transporting to reduce the potential of the tractor tipping ove r . T ransport on slopes only at slow speeds and use grad ual turning angles.
OPERATION 1595 01/11 Ope ration Section 4-22 © 201 1 Alam o Group Inc. OPERA TION Do not operate the loa der from the ground. Ope rate the tractor and load er only while seated in the tractor seat with the seatbelt fastened. Th e loader could fall crushin g a person resulting in serious injury or death.
OPERATION 1595 01/11 Ope ration Section 4-23 © 201 1 Alam o Group Inc. OPERA TION Always have a heavy attachment, su ch as a bucket mounted on loader when it is re moved from tractor . It is important not to put excessive weight on p arking st ands with lif t cylinder retraction.
OPERATION 1595 01/11 Ope ration Section 4-24 © 201 1 Alam o Group Inc. OPERA TION 7. Operating the Loader The following text and illustrati ons offer suggested loader an d tractor operating techniques. FILLING THE BUCKET Approach and enter th e pile with a level bucket.
OPERATION 1595 01/11 Ope ration Section 4-25 © 201 1 Alam o Group Inc. OPERA TION Loaders wit 1-lever con trol, ease lever back toward you to lift and roll back bucket. With series valve, prevent loader stall by not lifting and rolling back at the same time.
OPERATION 1595 01/11 Ope ration Section 4-26 © 201 1 Alam o Group Inc. OPERA TION A level bucket throughout the lif ting cycle resists bucket lift and increa ses breakaway ef f ort. NOTE: Do not be concerned if the bucket is not completely filled durin g each pass.
OPERATION 1595 01/11 Ope ration Section 4-27 © 201 1 Alam o Group Inc. OPERA TION CARR YING THE LOAD Position bucket just below tractor hood for maximum stability and visib ility , whether bucket is loaded or empty . Use extreme care when ope rating loader on a slope, keep bucket as low as possible.
OPERATION 1595 01/11 Ope ration Section 4-28 © 201 1 Alam o Group Inc. OPERA TION DUMPING THE BUCKET Lift bucket high enough to clear sid e of vehicle. Move tractor in as close as possible to side of vehicle, then dump bucket. LOWERING THE BUCKET After bucke t is dumped, back away fro m vehicle while lowering and rolling back bucket.
OPERATION 1595 01/11 Ope ration Section 4-29 © 201 1 Alam o Group Inc. OPERA TION OPERA TING WITH FLOA T CONT ROL During hard surf ace operation, keep bucket level and put lift contro l in float position to permit bucket to float on workin g surface.
OPERATION 1595 01/11 Ope ration Section 4-30 © 201 1 Alam o Group Inc. OPERA TION Side cutting is a good technique for cutting down a big pile. If the pile sides are too high a nd liable to cause cave-in, use loader to break down the sides until a slot can be cut over the top.
OPERATION 1595 01/11 Ope ration Section 4-31 © 201 1 Alam o Group Inc. OPERA TION It is important to keep the bucket level when approaching a bank or pile. This will help prevent gouging the work ar ea. PEELING AND SCRAPING Use a slight bucket angle, travel forward and hold lift control forward to st art the cut.
OPERATION 1595 01/11 Ope ration Section 4-32 © 201 1 Alam o Group Inc. OPERA TION Make additional passe s until desired depth is reached. Dur ing each pass, use only bu cket control while working depth. This will allow you to concentrate on controlling bu cket angle to maintain a precise cut.
OPERATION 1595 01/11 Ope ration Section 4-33 © 201 1 Alam o Group Inc. OPERA TION BACKFILLING Approach pile wit h a level bucket. Poor methods actually move no more dirt and make it more diff icult to hold a level grade. Do not use bucket in dumped position for bulldozing.
OPERATION 1595 01/11 Ope ration Section 4-34 © 201 1 Alam o Group Inc. OPERA TION Operate tractor at righ t angles to ditch. T ake as big a bite as tractor can ha ndle without lugging down. Leave dirt which drif ts over side of bucket for final cleanup.
OPERATION 1595 01/11 Ope ration Section 4-35 © 201 1 Alam o Group Inc. OPERA TION Pile dirt on high side for easier backfilling on a slope. HANDLING LARGE HEA VY OBJECTS 1. Using front end load ers for handling large heavy object s such as large round or rect angular bales, logs and oil drums is not recommended.
OPERATION 1595 01/11 Ope ration Section 4-36 © 201 1 Alam o Group Inc. OPERA TION 7.1 Operating Bale Spear (Optional Att achment) Operate the bale spear using extreme cauti on. Sharp point s on bale spear ca n cause serious injur y or death. Because of size a nd weight of large bales, extreme care must be taken in handling them.
OPERATION 1595 01/11 Ope ration Section 4-37 © 201 1 Alam o Group Inc. OPERA TION Carry bales as low to th e ground as possible to allow maximum visibility and avoid tipping.
OPERATION 1595 01/11 Ope ration Section 4-38 © 201 1 Alam o Group Inc. OPERA TION 9. T ransporting the T ractor and Implement Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death.
OPERATION 1595 01/11 Ope ration Section 4-39 © 201 1 Alam o Group Inc. OPERA TION In case of mechanical dif ficulty during operation, place the transmission in the p ark position, set the parking brake, shut down all powe r , including th e PTO and the engine and remove the key .
OPERATION 1595 01/11 Ope ration Section 4-40 © 201 1 Alam o Group Inc. OPERA TION 9.1 T ransporting on Public Roadways Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly vis ible and leg ible.
OPERATION 1595 01/11 Ope ration Section 4-41 © 201 1 Alam o Group Inc. OPERA TION 9.2 Hauling the T ractor and Implement Before transporting a loade d tractor and imple ment, measure the height and width dimensions and gross weight of the complete loaded unit.
OPERATION 1595 01/11 Ope ration Section 4-42 © 201 1 Alam o Group Inc. OPERA TION 10. T roubleshooting Guide TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Loader slow or will not lif t Hydraulic oil too heav y . Change to proper oil. and/or dump Oil filter plugged.
OPERATION 1595 01/11 Ope ration Section 4-43 © 201 1 Alam o Group Inc. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Insufficie nt lift cap acity Load is greater than boom Check loader specifications. lif t cap acity . Improper hydraulic pump Repair or replace pump.
.
Maintenanc e Section 5-1 MAINTENANCE SECTION.
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-2 © 201 1 Alam o Group Inc. MAINTENANCE Never interfere with factory-set hydraulic calibrations. Any change in calib ration could cause a failure of the eq uipment and may result in injury . (SBH -13) READ, UNDERST AND, and FOLLOW the following Safety Messag es.
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-3 © 201 1 Alam o Group Inc. MAINTENANCE NEVER perform maintena nce beneath a raised loader unless loader is properly supported to prevent accident al lowering. Do Not fill fuel tank while engine is running.
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-4 © 201 1 Alam o Group Inc. MAINTENANCE Lubrication Information Before operating your Loader , take the time to inspect a nd re pair any damag e to the machine or tractor .
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-5 © 201 1 Alam o Group Inc. MAINTENANCE Daily Checks Regular maintenance of your loader and hydraulic system will insure maximum load er efficiency and long life. 1. Chec k fluid level o f tractor hyd raulic system b e fore star ting each days operatio n.
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-6 © 201 1 Alam o Group Inc. MAINTENANCE Lif t and Bucket Cylind er Disassembly 1. Hold cylinder tube (13) stationary and use a sp anner wrench to unscrew cylinder head (4). 2. Pull sh aft (1), with all ass embled parts, out of cylinde r tube (13).
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-7 © 201 1 Alam o Group Inc. MAINTENANCE St o r a ge NOTE: When loader hydraulics are di sconnected from tractor , the tractor hydraulic circuit must be completed. Failure to do so will result in tractor hy draulic pump damage.
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-8 © 201 1 Alam o Group Inc. MAINTENANCE 3. Do not remove atta chment from stored loader . 4. Do not allow children to play on or around loader .
MAINTENANCE 1595 01 /11 Maintenance Se ction 5-9 © 201 1 Alam o Group Inc. MAINTENANCE Proper T orque for Fasteners The chart lists the corre ct tightening torque for fa stener s.
MAINTENANCE 1595 01/11 Maintenance Section 5-10 © 201 1 Alam o Group Inc. MAINTENANCE.
MAINTENANCE 1595 01/11 Maintenance Section 5-11 © 201 1 Alam o Group Inc. MAINTENANCE.
RH I NO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, gove rnmental, or municipal purchaser (“Purchaser”) and wa.
T O THE OWNER/OPERA T OR/DEALER T o keep your implement running ef ficiently and safely , read your manual thor oughly and follow these dire ctions and the Safety Messages in this Manual. T he T able of Contents clearly ident ifies each sect ion where you ca n easily find the informa tion you need.
1595-SOM-01/1 1 P/N F-4124C Printed U.S.A 1595 LOADER.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alamo 1595 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alamo 1595 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alamo 1595 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alamo 1595 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alamo 1595, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alamo 1595.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alamo 1595. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alamo 1595 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
