Manuale d’uso / di manutenzione del prodotto 62825 del fabbricante Electrolux
Vai alla pagina of 40
LAVAMA T 62825 W ashing Machine User information.
2 Dear Customer , Please r ead this user information caref ully and keep it to refer to later . Please pass the user information on to any future owner of the appli- ance. The following symbols ar e used in the text: 1 Safety instructions War n i n g ! Information that affects your personal safety .
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance .
4 Installation and connection instructions . . . . . . . . . . . . . . . . . 25 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 25 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Oper ating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and conn ection instructions” . • If the appliance is delivere d in th e winter months when there are mi- nus temperatur es: stor e the washin g machine at room temperatur e for 24 hours befor e using for the fir st time.
6 Gener al safety • Repairs to the washing machine may only be carried out by qualified/ authorised service engineers. • Never use the appliance when the el ectrical cable is damaged o r the control panel, worktop or plinth ar ea are damaged to such an extent that the inside of the app liance is openly accessible.
7 Description of the appliance Contr ol panel Detergent dispenser drawer Screw feet (height adjustable) Plinth flap/ Drain pump Rating plate (behind doo r) Contr ol panel Spin/RINSE HOLD button Progr .
8 Pr ogr amme overview Progr amme max. load 1) (dry wash ing) 1) A 10 litr e bucket contains appr ox. 2.5 kg dry washing (cotton) Additional pr ogr ammes Spin speed RINSE HOLD RINSE + TIME SAVER PRE W.
9 Application/Features Care symbols 1) 1) Th e figures in the care symbols indicate th e maximum temperatures. Energy-saving programme which washes at 60 °C for lightly to normally soiled whites or colours made of cotton/linen. M O Progr amme for n ormally to heavily soiled whites/co lours made of cotton/linen.
10 Befor e the first wash 1. Open the detergent dr awer . 2. P our approx. 2 litr es of water thr ough the detergent dr awer into the washing machine. This closes the water container when the next progr amme is started and the economy valve can function pr operly 3.
11 Running a wash cycle Opening the door/l oading washing 1. Open the door: pull the handle on the door . When the appliance is switched on , the DOOR and ST ART/PAUSE indica - tors show whether the door can be opened: 2. Separate washing and load it loose- ly .
12 hardness r ange 1 (=soft). Y our local water company will pr ovide you with information about water hardness in your ar ea. 1. Pull out the detergent dr awer as far as it will go. 2. Add the detergent/conditioner . 3. Push the detergent dr awer in fully .
13 Changing the spin speed/selecting rinse hold The washing machine suggests the maximum permitted spin speed suitable for the selected pro- gramme. Y ou can reduce this spin speed: To do this, pr ess the Spin/RINSE HOLD button repeatedly until the requi red indicator is illuminated.
14 PRE WASH Warm pr e-wash before the main wash th at follows automatically; with intermediate spin for COTT ONS/LI NEN and EASY -CARES, without inter- mediate spin for DELICA TES. STAIN For heavily soiled or stained washing. Stain r emoval agent will be rinsed into the wash a t the optim um point in the progr amme.
15 Interrupting a pr ogramme/adding washing Interrupting a pr ogramme • A progr amme can at any time be in terrupted by pressing the ST ART/ PAUSE button and r esumed by pressing START/P AUSE again. • To cancel a pr ogramme befor e it has ended, turn the progr amme se- lector to OFF .
16 Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go.
17 Cleaning and maintenance Important! Do not use furniture car e produ cts or aggr essive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Cleaning pr ocedure If you plan to wash mainly at low temper ature, you should run a hot progr amme from time to time.
18 Door and rubber collar Regularly check whether deposits or for eign bodies are pr esent in the folds of the rubber collar or on the inside of the glass doo r .
19 E10 appears. The END indica tor is flashing once, an d si- multaneo usly an acous- tic signal is sounding once. (Problems with the wa- ter inflow .) The tap is shut off. Turn on the tap. The filter in the inle t hose scr ew connection is blocked. Turn off the tap.
20 If the wash result is not satisfactory The washing is grey a nd there are limescale deposits in the drum • Too little detergent was used. • An incorr ect detergent was used. • Individual stains were not pr e-treated. • The progr amme or temperatur e was not set properly .
21 There ar e white residues on the washing • What can be seen here ar e insolu ble substances which modern deter- gents contain. They are not the r esult of insufficient rinsing. Shake or brush the wash ing. If possible turn the washing inside out before washing.
22 Dr ain pump The dr ain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that ther e are no for- eign bodies present in the pockets or in between the items to be washed.
23 Disposal 2 Packaging material The packaging materials are envir onmentally friendly and can be recy- cled. The plastic components are id entified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pa ckaging materials in the appropriate container at your local waste disposal facilities.
24 T echnical data 5 This appliance conforms with the following EU Dir ectives: – 73/23/EEC dated 19.02.1973 Low Voltage Dir ective – 89/336/EEC dated 03.05.1989 EMC Dire ctive inclusive of Amending Directive 92/3 1/EEC – 93/68/EEC dated 22.0 7.
25 Installation and connection instructions 1 Safety information concerning installation • This washing machine cannot be built-in . • Before using for the fir st time, check the appliance for damage sus- tained while it was being transpor ted. Do not under any cir cumstanc- es connect an appliance that is dama ged to the mains.
26 Installing the appliance T ransporting the appliance 1 War n i n g : The washing machine is very heavy . There is a risk of injury . Exercise car e when lifting the appliance. • Do not lay the washing machine on its front nor on its right side (as seen from the f ront).
27 2. Remove the power supply cable and the draining hose fr om the hose holders on the rear of the appliance. 3. With a suitable spanner unscrew and rem o v e th e c e nt ra l re a r b o l t A . Slide out the relevant plastic spacer . 4. Un s c re w a n d re m ov e t h e t w o l a rg e rear bolts B and the six smaller bolts C .
28 5. Remove the bracket D. 6. Refit the six smaller bolts C . 7. Open the porthole and remove the polystyrene block fitted with the ad- hesive tape on the door seal. 8. Fill the smaller upper hole and the two large ones with the correspond- ing plastic plug caps supplied in the bag containing the instruction booklet.
29 Connect the water inlet hose as described under the par agraph “W ater inlet” . Wher e to install Important! The washing machine must not be operated in a room where ther e is a danger of frost. There is a risk of frost damage or ad- verse effect on the perfomance of the machine.
30 Electrical Connection Any electrical work r equired to install this appliance should be carried out by a qualified electrician or competent person. 1 WARNI NG – THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liabi lity should these safety measur es not be observed.
31 P ermanent Connection In the case of a permanent connection it is necessary that you install a double pole switch between the appl iance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the requir ed load in compliance with the current electrical regulations.
32 W ater inlet Attention! • An inlet hose is supplied and can be found inside the machine drum. • Do not use the hose fr om your previous machine to connect to the water supply . • This appliance must be connec ted to a cold water supply . 1. Open the porthole and extract the inlet hose.
33 Wa t e r D ra i n a g e The appliance dr ain hose should hook into a standpipe, the hook in the drain hose is formed using the plas tic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring ther e is an ai r break between the dr ain hose and standpipe.
34 Pumping heights of over 1 metr e The washing machine’s dr ain pump is ab le to pump water to a height of 1 metr e, calculated from the surface on which the appliance is instal led. Important! If pumping height is over 1 metr e malfunctions and dam- age to the appliance may arise.
35 Guar antee/Customer Service Eur opean Guarantee www .electrolux.com This appliance is guaranteed by Electr olux in each of the countries list ed at the back of this user manual, for the period specified in the appliance guarant ee or ot herwise by law .
36 Lietuva +37 0 5 2780609 Verkių 29, LT09108 Vil nius Luxembourg +35 2 42 43 13 01 Rue de Bitbour g, 7, L-1273 Hamm Magyarország +36 1 252 1773 H-1 142 Buda pest XIV , Erzsébet királyné útja 87 Nederland +3 1 17 24 68 300 Vennootsweg 1, 2404 CG - Alphen aan den Rijn Norge +47 8 1 5 30 222 Risløkkvn.
37.
38.
39 Service and Spar e P arts If the event of your appliance requir ing service, or if you wish to pur- chase spare parts, please contac t Service For ce by telephoning: Y our telephone call will be automa tically routed to the Service Force Centre covering your post code ar ea.
www.electrolux.com www.aeg-electrolux.co.uk 132 977 220-00-260107-0 2 Subject to change without notice.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Electrolux 62825 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Electrolux 62825 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Electrolux 62825 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Electrolux 62825 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Electrolux 62825, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Electrolux 62825.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Electrolux 62825. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Electrolux 62825 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
