Manuale d’uso / di manutenzione del prodotto LC-X2UL del fabbricante Eiki
Vai alla pagina of 58
MULTIMEDIA PROJECTOR MODEL LC-X2U LC-X2UL (Without Lens) OWNER’S INSTRUCTION MANUAL.
INFORMATION TO THE USER NOTE: This equipment has been tested a nd found to comply with the limits for a Class A digital device, pursu ant to Part 15 of FCC Rules. These limits are desi gned to provide re asonable protection against harmfu l interference when the equipment is operated in a commerci al environment.
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be re ad before the product is operated. Read all of the instru ctions given here and retain the m for later use. Unplug this project or from AC power supply before cleaning.
TABLE OF CONTENTS PAGE FEATURES AND DESIGN 5 INTRODUCTION 5 COMPATIBILITY 5 IMAGE RESOLUTION 5 AUTOMATIC MULTISCANNING SYSTEM 5 SCREEN MODE 5 MULTILANGUAGE 5 UNPACKING THE PROJECTOR 5 TRADEMAR KS 5 IN.
FEATURES AND DESIGN INTRODUCTION The multimedia projector that combinesx powert ul and sophisticated teatures with easy-to-use, intuitive controls. Built-in multimedi a features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology.
.
• This projector is basically design ed to project on a flat projection surface. • This projector can be focused from 4.9’ (1.5 m) ~ 80.7’ (24.6 m). • Refer to the figure below as an example when positioning the projector to the screen. Picture tilt and projecti on angle can be adjusted by twisting ADJUSTABLE FEET.
This projector is equipped with a cooling fan to protect it from overheating. Pay attention to the following to ensure the ventilation and avoid a possible risk of fire and malfunction. •Do not cover the vents with papers or other materials. •Keep the rear grill at least 3.
Your projector uses nominal input voltages of 100-120 VAC. The projector automatically selects the correct input voltage. The projector is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.
1 COMPUTER INPUT-1 TERMINAL (ANALOG HDB 15-PIN) Used to connect a computer to the projector. 8 CONTROL PORT-1 CONNECTOR Used to connect a mouse cable to the projector. 2 COMPUTER INPUT-1 RMINAL (DI GITAL MDR 20- PIN) Used to connect a computer to the projector.
14 VIDEO INPUT JACKS-1 (BNC TY PE x 3) Used to connect a video source to the projector. 19 AUDIO INPUT JACKS-2 (R and L) Used to connect an audio source to the projector. 15 S-VIDEO INPUT JACK-1 Used to connect a S-VHS video source to the projector. 20 VIDEO MONITOR OUTPUT JACK S (BNC TYPE x 3) Permits video connection to a monitor.
Personal computers can be connected to the HDB1 5-pin (VGA) terminal on the projector. • Connect the computer to these terminals usi ng the VGA cable and VG A/MAC adapter (provided). CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference ) emissions.
Pin No./Signal 1 Red input 2 Green input 3 Blue input 4 Sense 2 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) Pin No./Signal 9 Non Connect 10 Ground (Vert.
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC out let. Turn the projector and peripher al equipment on before the computer is switched on.
‘NOTE: When connecting the cable , the power cords of both the projecto r and the external equipment should be di sconnected from AC outlet. Turn the projector and peripheral equipment on bef ore the computer is swit ched on.
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC out let. Turn the projector and peri pheral equipment on before the computer is switched on.
NOTE: When connecting the cable , the power cords of both the projecto r and the external equipment should be disconnected from AC outlet. Turn the p rojector and pe ripheral equipment on before the computer is switch ed on.
NOTE : When connecting the cable, the power cords of both the projector and t he external equipment should be disconnected from AC out let. Turn the projector and peripheral equipment on before the computer is switched on.
NOTE: When connecting the cable, the power cords of both the projec tor and the external equipment should be disconnected from AC outlet. Turn the pr ojector and peripheral equipment on before the computer is switched on.
CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3 Connect to th e video outputs of a VCR, video disc player , DVD player, video camera, satellite TV tuner or other AV equipment . Connect vide o output from AV equipm ent to these jac ks using the B NC cables.
NOTE: When connecting the cable, the power cords of both the proj ector and the external equi pment should be disconnected from AC outlet. Turn the p rojector on before the peripheral equipment is switch ed on.
.
LAMP REPLACEMENT INDICATOR Light is orange when the Lamp life draws to an end. . TEMPERAT URE WARNING INDICA TOR Flashes red when intern al projector temperatu re is too high. READY INDICATOR Light is green when projector lamp is rea dy to be turned on.
This remote control unit is not only able to operate t he projector but also usable as a wireless mouse for a PC. One pointing pad and two click buttons are used for wireless mouse operation. Wireless mouse is usable when PC mouse pointer is displayed on the scre en.
COMPUTER SELECT BUTTON Used to select computer mode. (C omputer 1 or Comp uter 2 Input) VIDEO SELECT BUTTON Used to select video mode. (Video 1 or Video 2 Input) POWER ON/OFF BUTTON Used to turn the projector on or oft. VOLUME BUTTONS Used to adjust volume.
To insure safe operation, please observ e the following precautions: • Use (2) AA type alkaline batteries. • Change two batteries at the same time. • Do not use a new battery with a used battery. • Avoid contact with water. • Do not drop the remote control unit.
WIRED REMOTE JACK When using the wired remote cont rol, c onnect the remote cable to this jack. COMPUTER SELECT BUTTON Used to select computer mode. (Computer 1 or Computer 2 Input) VIDEO SELECT BUTTON Used to select video mode. (Video 1 or Video 2 Input) POWER ON/OFF BUTTON Used to turn projector on or off.
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is ab out 16.4’ (5m) and 60° front and rear of the projector Connect a remote control cable to R/C jacks located on the wireless/wired remote control unit and the side of the projector.
The projector has two types of operation: DIRECT OPERATION and MENU OPERATION. DIRECT OPERATION allows you to operate the projector by using one button without showing the MENU. In MENU OPERATION mode, you display menus where y ou can adjust the projector’s settings.
MENU OPERATION ADJUST ITEM TOP CONTROL OF THE PROJECTOR WIRELESS/WIRED REMOTE CONTROL WIRELESS REMOTE CONTROL MODE SELECT MENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECT MENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECT MENU POINT (LEFT/RIGHT) SELECT (REAR CLICK) POINT (UP/DOWN) SELECT (REAR CLICK) 1.
3. COMPUTER MODE ADJUST ITEM TOP CONTROL OF THE PROJECTOR WIRELESS/WIRED REMOTE CONTROL WIRELESS REMOTE CONTROL COMPUTER SYSTEM MENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECT MENU POINT LEFT/RIGHT .
Connect the projector to a source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriate terminals on the side of the projector (See “CONNECTING THE PROJECTOR” section on pages 10- 21).
Press the MODE button on the projector or the COMPUTER and VIDEO button on the remote control unit to select Computer 1, Computer 2, Video 1 or Video 2 Input. The “Computer 1”, “Computer 2”, “Video 1” or “Video 2” display will appear on the screen for a few seconds.
Press the D. ZOOM button on the wireless remote c ontrol unit. The “D.zoom” and the magnifying-glass icon is displayed to indicate Digital zoom mode. Digital zoom mode can be adjust the image size or pan the image. To expand the image size, press SELECT (REAR CLICK) button.
You can select a mode from MAIN MENU display among computer 1, computer 2, video 1, video 2. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select Computer or Video and press the SELECT (REAR CLICK) BUTTON.
You can adjust the sound volume, treble, bass levels and Built-in SP., Sound Mute ON/OFF switch in the MENU display. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select SOUND and press the SELECT (REAR CLICK) BUTTON.
This projector is compatible with the six major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43, PAL- M and PAL-N (COLOR SYSTEMs). When the color system is set to “Auto position”, this projecto r can detect one of 4 systems (PAL, SECAM, NTSC or NT SC 4.
Picture adjustments have been preset at the factory. If you want to change the setting, operate th e projector as follows. 1. Press MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT (REAR CLICK) BUTTON.
This projector has the Wide function, which enables you to view a wider video image. WIDE function This projector is able to project not only a normal video image (with 4 x 3 aspect ratio), but also a wider video image by compressing 4 x 3 image. This feature enable you to enjoy watching pictures like cinema images.
This projector is adjustable to different types o f computer di splay signals based on VGA, SVGA, XGA or SXGA (See “COMPATIBLE COMPUTER SPECIFICATIONS” on the next page). If you set MODE SELECT to “COMPUTER”, the projector will automatically process the incoming signal and pr oject the proper image without any special setting.
Specifications are subject to change without notice. NOTE: Basically this projector can accept the signal from all computers with the above mentioned V, H-Frequency and less than 200 MHz of Dot Clock.
The Auto image function is provided to automatically adjust Fine sync., Total dots and Screen position for most computers. NOTE: This auto image function will be skipped when the incoming signal is digital. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
Picture adjustments have been preset at the factory. It y ou want to change the setting , operate th projector as follows 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT (REAR CLICK) BUTTON.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(S) to s elect POSITION and press the SELECT (REAR CLICK) BUTTON. Another dialog box POSITION SETTING DISPLAY will appear. 3. Press the POINT DOWN BUTTON and a red arrow will appear.
This function will be skipped when the incoming signal is dig ital. S This projector can automatically detect most display signals from most personal computers currently distributed. However, some computers adopt a special signal format which is different from the standard one and the projector cannot detect it.
6. Another dialog box “PC ADJUSTMENT DISPLAY 1” will appear and the parameter data for the Mode you have selected is shown in this dialog box. 7. The parameters will be filled with the data determined by the projector according to the present signal input.
17. Another dialog box “PC ADJUST MENT DISPLAY 2” will appear and the parameter data for the Mode you have selected is shown in this dialog box. p18. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s). 19. To increase the level, point the arrow to S and then press the SELECT (REAR CLICK) BUTTON.
MODE FREE The Mode free function is provided to confirm or clear the parameter data produced by PC ADJUST. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to sele ct PC ADJUST and press the SELECT (REAR CLICK) BUTTON.
This projector can adjust the image size and pan the image with PICTURE SCREEN ADJUSTMENT. 1. Press MENU BUTT ON and MAIN MENU DISPLAY dialog box will appear. 2. Press POINT LEFT/RIGHT BUTT ON(s) to select SCREEN and press the SELECT (REAR CLICK) BUTTON.
This projector has other functions setting: Blue back, Display, Reverse T/B, Reverse R/L, Split wipe, Power management, USB, Remote control and Lamp age. When this function is in the “On” position, the projector will project a blue image without video noise on the screen when the video source is unplugged o r turned off.
This projector can be operated with two different c ode, one is factory-set norma l code (MODE 1) and the other one is extended code (MODE 2). This is used to prevent the remote control operation mi xture (jam) when two projector and several remote control video equipments ar e system-up and used together.
The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp replacement monitor timer by using this function. NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced.
The TEMPERATURE WARNING INDICATOR flashes red when the internal temperature of the projector exceeds the normal temperature. Possible causes for the temperature warning may be: 1. Ventilation slots of the projector are blocked. In such an event, reposition the projector so t hat ventilation slots are not obstructed.
WHEN THE PROJECTION LA MP OF THIS PROJECTOR DRAWS T O AN END, THE LAMP REPLACEMENT INDICATOR LIGHTS YELL OW AND THE WARNING MESSAGE “LAMP REPLACEMENT” APPE ARS AS THE RIGHT FIGURE. WHEN THE WARNING MESSAGE IS DISPLAY ED, THE PROJECTION LAMP SHOULD BE REPLACED.
Follow these steps to clean the projection lens: 1. Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other har sh chemicals might scratch the lens. 2. Lightly wipe the cleaning cloth over the lens.
Problem: Try these Solutions: Picture is T/B inverted, Check Reverse T/B feature. (See “OTHER FUNCTION SETTING” section on pages 50 Picture is L/R Reversed. Check Reverse L/R feature. (See “OTHER FUNCTION SETTING” section on pages 50 51). Some displays are not seen during the operations Check Display feature.
Projector Type Multi-media Projector Dimensions (W x H x D) 15.4” (390 mm) x 9.2” (234 mm) x 22.9” (582 mm) Net Weight 39.2 lbs (17.8 kg) LCD Panel System 1.8” TFT Active Matrix type x 3 panels Number of Pixels 2,359,296 {786,432 (1,024 x 768) x 3} Color System 6 color system (PAL, SECAM, NTSC, NTSC4.
Audio Visual/Video Products EIKI INTERNATIONAL, INC. 26794 Vista Terrace Drive, Lake Forest, CA. 92630-8113, U.S.A. TEL (949) 457-0200 FAX (949) 457-7878 IN CANADA, EIKI CANADA 865 Heritage Drive P.O. Box 156 Midland Ontario L4R 4K8 Canada TEL (705) 527-4084 FAX (705) 527-4087 Printed in Japan Part No.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Eiki LC-X2UL è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Eiki LC-X2UL - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Eiki LC-X2UL imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Eiki LC-X2UL ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Eiki LC-X2UL, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Eiki LC-X2UL.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Eiki LC-X2UL. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Eiki LC-X2UL insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
