Manuale d’uso / di manutenzione del prodotto HP-5102 del fabbricante Edimax Technology
Vai alla pagina of 31
HP - 5102 User Manual 01-201 3 / v1.0.
1 COPYRIGHT Copyright Edim ax Technology Co., Ltd. al l rights reserved. No part of this publication may be reprodu ced, transmitted, transc ribed, stored in a retrieval system, or translated in t.
2 Contents Chapter 1: Introduction ..................................................................................................................................... 3 1.1 Product Features ...........................................................
3 Chapter 1 : In troduction 1.1 Product Featur es Easy plug-n-play setup and 12 8-bit AES security Max. powerline spe ed up to 500Mb ps Backward comp atible with 20 0Mbps powerline adapter.
4 1.3 Compatibility 500Mbps p owerline devices (HomeP lug AV standard) are incompatible an d cannot be used with 14 Mbps and 85Mb ps powerline devices ( HomePlug 1.0 an d 1.1 standards ). 1.4 System Requir ements Operating System Utility supports Wind ows XP/Vista /7/8 CPU Intel P entium III 1.
5 Chapter 2 : In terfaces 2.1 LEDs LED Status Description LAN Green LAN port connecte d Blinking LAN activity (transf erring data) Off LAN port not conn ected PLC Green/Red The green indicator turns on and the red indicator turns bli nks slowly when the devic e is detecting a powe rline link.
6 Leaves an encrypt ed powerline network group (press the button f or 5~8 seconds) . Restores the powerline ada pter to factory defaults (press the button f or 10~15 seconds ). 2.3 Fast Ethernet P ort You can connect the powerline adapter to a route r, a compu ter, or any net work device via this Fast Ethern et port.
7 Chapter 3:Utility Software Installa tion 3.1 Win 8 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer.
8 Step 4 Click right button on WinPCap 4.1.2 then click “ Properties ” . Step 5 Click Comp atibility tab and check “ Run this program in compatib ility mode for:", then selec t Windows 7, then c lick “ Apply ” .
9 Step 6 Then click “ Win Pcap_4_1 _2 ” . The wizard will guide yo u through the setup process. Step 7 When the following Win Pcap C ompatibility Assistant app ears, select Run the program without ge tting help.
10.
11 Step 8 After the installation is comp lete, click “ Finish ” ..
12 Step 9 Click th e “ Edimax PowerLine Utilit y ” , the “ PLC 50 0Mbps Utility ” appears, click “ Next ” to continue. Step 10 Select where you want to install the utility software, and then click “ Next ” .
13 Step 11 After the installati on is complete, click “ Close ” ..
14 Step 12 An icon will app ear on your desktop. C lick the icon to open the utility soft ware. Note: You can manage all t he connecte d powerline adapte rs with th e utility software.
15 3.2 Win XP/Vista / 7 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer. Step 2 Insert the CD into your CD -ROM drive.
16 Step 4 If you have not installed Win Pcap version 4.1.2 (or high er) on your c omputer before. The wizard will guide you through the setup process..
17.
18 Step 5 When th e “ Edimax PowerLine Utility ” setup wizard appears, c lick “ Next ” to continue. Step 6 In the “ Lic ense Agreement ” scree n, please select “ I Agree ” an d then click “ Next ” to continue.
19 Step 7 Select where you want to install the utility software, an d then click “ Next ” . Step 8 If you confirm to install the utility, click “ Next ” .
20 Step 9 After the installation is comp lete, click “ Close ” . Step 10 An icon will appear on your desktop. Click the icon to op en the utility software . Note: Y ou can manage all the connec ted powerline adapte rs with the utility software. However, i nstalling th e utility software i s optional.
21 Chapter 4 : Using the Utility Softw are 4.1 Main Tab The “ Main ” tab provides a list of p owerline adap ters connected to the net work. The upper p anel displays local powerline adapters . Th e lower pan el displays remote powerline adapters in the network.
22 4.2 Diagnostics Tab The “ Diagnostics ” tab displays the syste m information and history of all rem ote devices. The upper p anel displays techn ical data concern ing the software and hardware on th e host compute r and t he lower panel displays th e history of all re mote d evices.
23 4. 3 About Tab The “ About ” tab contains some b asic information about the software. You can also enable or d isable the autoscan fun ction under “ Preferen ces ” .
24 Chapter 5 : Grou p Button This section dem onstrates how to add or remove d evices from a HomeP lug AV n etwork with the “ Group ” button. 5.1 Forming a Hom ePlug AV Logical N etwork When two d.
25 5.2 Joining a Netw ork If you want to add a new powerline device to an existing network , follow th e following procedures: Step 1 Press the “ Group ” button on an ad apter in the existing n etwork (adapter A or B) for less than 3 seconds. The Power LED will st art to blink.
26 5.3 Leaving a Netw ork & Joining an other Network If you want to remove a p owerline device from an existing network and ad d it to another net work, follow the following procedu res: Step 1 Press the “ Group ” button on th e adapte r to be removed (adapter B) for at least 10 seconds.
27 Chapter 6: Trou bleshooting If your powerline ada pters have difficu lty communicatin g with each other, try the following proc edures: Try power cycling the unit by unplug ging it from the ele ctric outlet for 10 sec onds and plugging it in again.
28 Federal Communic ation Commissi on Interference Statement This equipment has b een tested and f ound to comply with the limits f or a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These li mits are designed to provide re asonable pr otection again st harmful interf erence in a residential installation.
29 EU Declaration of Confor mity English: This equipment is in comp liance with the essential requ irements and other re levant provisions of Directive 2004/108/EC, 2 009/125/EC.
30.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Edimax Technology HP-5102 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Edimax Technology HP-5102 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Edimax Technology HP-5102 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Edimax Technology HP-5102 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Edimax Technology HP-5102, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Edimax Technology HP-5102.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Edimax Technology HP-5102. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Edimax Technology HP-5102 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.