Manuale d’uso / di manutenzione del prodotto IC-3110P del fabbricante Edimax
Vai alla pagina of 148
IC-3110 / IC-3110W / IC-3110P User Manual 04-2012 / v1.0.
1 COPYRIGHT Copyright © Edim ax T echnology Co., Lt d . all rights reser ved . No pa rt of this publication ma y be rep.
2 Ta b l e of Conten ts Chapter I: Familiar with your Internet Network Camera ................................... 4 1.1 Package Contents ........................................................................................ 4 1.
3 3-3 Configure Network Came ra surveillance software ................................ 82 3-3-1 Configure cameras ......................................................................... 82 3-3-2 General Settings .............................
4 Chapter I: Familiar with your Internet Network Camera 1.1 Package Content s Thank you for purchasing this Network Ca mera! Before you start to use this Network Camera, please check the package contents. If anything is missing, please contact the dealer of purchase and return the p ackage to claim for missing contents.
5 1.2 Basic Introduction Thank you for purchasing this Network camera! This Network camera is an ideal product for all kinds of video surveillance purposes, like home/office safety , kid/pet monitoring, and remote video acquire etc. Edimax IC-31 10 series is tailor made to stream live video over your network.
6 1.3 Product Highlights No pre-loaded software required - a ll you need is a browser like Internet Explorer 6 (and above, with plugin installed). With supplied video surveillance software, you can connect up to 16 video cameras and view images captured by every camera at the same time.
7 1.4 Key Components LAN LED: Indicates LAN activity WLAN LED: Indicates Wireless LAN activity (only work on wired model plugged with USB WiFi dongl e and wireless model) Power LED: Indicates power st.
8 Wired model POE model Wireless model SD Card Slot: Accepts SD / SD-HC memory card for image / video storage USB Port: Connects to cert ain wireless module.
9 WPS: click the button on IP Cam and click it on the AP you want to connect wireless connection.(works on wired model with USB wifi dongle plugged or wireless model) Reset to Default Button: Press and hold for more than 10 seconds to reset the camera settings to factory default value.
10 T r ipod Connector: Connects to any st andard tripod / camera wall holder . MAC Address Label: Shows the MAC address of this Network Camera. Useful when you can’t locate the camera on the network.
11 1.5 Descriptions for LED Indicators LED Name S tatus Description Power/Cloud Off Camera is not powered (camera of f) On Camera is correctly powered (camera on) Flash The power LED will flash and light up when the camera is powered on and ready for access to Cloud.
12 1.6 Camera Inst allation Please follow the following instructions to set your Network Camera up. 1. Unpack the product p ackage and check if anything’ s missing. 2. Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this Network Camera.
13 1.7 Locate the IP Address of this Network Camera Default IP address of this Network Camera is 192.168.2.3. If you wish to assign another IP address to this Networ k Camera, you have to log onto the web configuration interfac e of the camera first. If the left three fields of the IP address of your computer is not 192.
14 2. Double-click ‘Network Connections’ icon. 3. Right-click ‘Local Area Connec tion’, and click ‘Properties’..
15 4. Select ‘Internet Protocol (T CP/IP)’, then click ‘Properties’..
16 5. In ‘IP address’ field, please fill in any IP address begins with ‘192.168.2’, and ends with a value greater than 2 and less than 254 (Y ou can use the example in the picture ‘192.168.2.339’). In Subnet mask field, please fill ‘255.
17 1.8 Using the Camera Admin Software to Locate the Camera If you can’t connect to the ca mera by the instructions gi ven in last chapter , you can use camera admin software to sear ch the camera which is connected to your local area network. The admin sof tware is also capable to locate multiple cameras on your local area network.
18 1. Double-click Ediview finder installer , and click ‘Run’ when you’re prompted: 2. Ediview finder will list all Ediamx net work cameras found on local network, with their IP address and MAC .
19 3. Ediview finder will inspect network camera’s connection type and if it’ s connected to Internet, this may take a few seconds, please be patient.
20 4. This message will tell you if your net work camera is connected to Internet (connected to the cloud), and the connec tion type (wired or wireless).
21 After the camera finder utility is launched, all cameras found on your local area network will be displayed. T o previe w the image of network camera, please click the icon indicated by white arro w , and provide username / password, and a snapshot will be displayed This function is only available when th is icon is display ed as blue color .
22 Search camera: Click this button to search all cameras on local area network again. Configure camera: Click this button to configure camera’s network and security setting.
23 Input the p assword (default: 1234) and cli ck OK to configure the camera’s network and security setting: In ‘Lan Setting’ page, you can configur e camera’s network settings.
24 1.9 Logging in the Management Interface Make sure the network camera is corre ctly powered (Power LED is on), and then launch Internet Explor er and type the IP address of the network camera in address bar of Internet Explorer .
25 If this is the first time you log onto web management interface, you’ll be prompted to install ActiveX Plugin: When you see this message, please cli ck ‘OK’, and click ‘Download the latest .
26 Click ‘Run’ to install plugin: Please click ‘Next’ button to start inst allati on (click ‘Next’ or ‘Install’ when you’re prompted, until installation is complete).
27 Click ‘Finish’ to complete plugin installation. Now you can go back to web browser , and you should be able to see the image captured by camera (Y ou may need to press F5 or CTRL-R to reload web page).
28 Note: If you see one of these messages (or both): Y our computer may not have the display capability that this Network Camera requires, or you don’t have Microsof t DirectX® installed. Please download Microsoft DirectX® from Microsoft’ s website ( http://www .
29 Chapter II: Using W eb Management Interface 2.1 Camera Settings The first menu after you logged onto w eb management interface is ‘Camera’, and this is the only menu you can see the real-time image from camera. Y ou can always back to this menu by clicking ‘Camera’ on the top of web management interface.
30 The descriptions of every setting in this menu will be given below: Item Description V ideo T ype S pecifies video encod ing type. Available options are ‘MPEG4’, ‘MJPEG’, and ‘H.264’. Different encoding type requires different bandwid th, and provides different video quality .
31 can change the directory by clicking the text input box located at the right of ‘Snapshot’ button: and you’ll be prompted to se lect a new directory . Recording Press this button to record the displaying image as a video file in A VI format, and you can play the video file back by Windows Media Player .
32 mode (uses all available space to display the image captured by this camera). *Please note: If you’re not using Micros oft Internet Explorer as web browser , some functionalities may not work properly .
33 2.2 V ideo Y ou can change video-related settings of this Network Camera in ‘Video’ menu. Y ou can access this menu by clicking ‘V ideo’ on the top of web management interface.
34 2.1.1 MJPEG Y ou can adjust video settin gs when yo u select ‘MJPEG’ as video type in ‘Camera’ menu. The descriptions of every setting in this menu will be given below: Item Description V ideo Resolution Changes the resolution of video. Available options are 1280 x 1024, 640 x 480, and 320 x 240.
35 2.1.2 MPEG4 Y ou can adjust video settin gs when yo u select ‘MPEG4’ as video type in ‘Camera’ menu. The descriptions of every setting in this menu will be given below: Item Description V ideo Resolution Changes the resolution of video. Available options are 1024 x 768, 640 x 480, and 320 x 240.
36 2.1.3 H.264 Y ou can adjust video settin gs when you select ‘H.2 64’ as video type in ‘Camera’ menu. The descriptions of every setting in this menu will be given below: Item Description V ideo Resolution Changes the resolution of video. Available options are 1280 x 1024, 640 x 480, and 320 x 240.
37 2.1.4 OSD If you need to display infor mation ab out this camera, like camera’s name or current date / time, you can use OSD (On-Sc reen Display) menu: The descriptions of every setting in this m.
38 2.1.5 Night V ision This camera equips with 10 IR LE Ds to enhance video quality in the night. Y ou can enable or disable IR LEDs by ‘Night Vision’ menu: The descriptions of every setting in this menu will be given below: Item Description Alaways** turn off IR led Do not use IR LEDs, even it’ s very dark.
39 2.2 Network Settings All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if y ou want to change IP address, use PPPoE, Dynamic DNS, and activate UPnP function. Y ou can access this menu by clicking ‘LAN’ on the top of web management interface.
40 2.2.1 LAN Y ou can define IP address and select t he port number you wish to use here..
41 The descriptions of every setting in this menu will be given below: Item Description Network T ype This camera can obtain the IP address from DHCP server automatically (if you have one), or set a fixed IP address.
42 most of ISPs and will give you a nice network performance. Click ‘Apply’ to save settings and ma ke the new settings take effect..
43 2.2.2 WLAN The descriptions of every setting in this menu will be given below: Item Description Wireless Connection Select ‘Enable’ to activate wireles s network function of this Network Camera, select ‘Disable’ to disable it. Network T ype Select the network type of wireless connection.
44 to it without wireless access point). Y ou can set to ‘Adhoc’ when you don’t have any wireless access point, but your com puter has wireless network card. Set to ‘Infrastructure’ when you have wir eless access point, and you have computers with wired network connection.
45 SSID Input the S SID of the wir eless access point you wish to connect. It should be less than 32 alphanumerical characters. When you select a wireless a ccess point above, it’ s SSID will be filled in this field automatically .
46 2.2.3 Dynamic DNS If your ISP does not give you a fixed In ternet IP address (i.e. the Internet address you’re using when you access the Internet is not always the same – ask your ISP for detailed information), you can use this function to help you locate the IP address of this Network Ca mera when you’re away from home or office.
47 2.2.4 UPnP When UPnP function is activated, all UPnP-compatible computers / network devices will be able to discover this Ne twork Camera automatically (only those in the same local network). This function is useful and you don’t hav e to remember the IP address of this Network Camera.
48 Click the message to open ‘My Network Places’, and you’ll see the Network Camera: Y ou can double-click the icon to launch Internet Explorer and log onto Network Camera’ s web management interface directly .
49 2.2.5 LoginFree This camera provides a method to le t unauthorized users to view the image captured by this camera, which is called as ‘LoginFree’.
50 2.2.6 R TSP If you want to watch video captured by this Networ k Camera by your own RTSP (Real T ime S treaming Protocol ) media player , you can use this function to setup R TSP pa rameters, so your R TSP -compatibl e player will be able to receive video dat a.
51 2.3 Motion Detection When you wish to use this camera to m onitor the activities , motion detection function will be very useful. Camera will detect the motion in captured image, and take a snap shot when motion is detected. So you can use this camera to keep the safety of the belongings you have.
52 2.3.1 Motion Detection Y ou can use this menu to setup basic motion detection settings: The descriptions of every setting in this menu will be given below: Item Description Enable Motion Detection Select ‘Enable’ to enable motion detection, and select ‘Disable’ to disable this function.
53 Recording T ime Select the duration yo u wish this camera to record image when a motion is detected from dropdown menu. A vailable options are 1, 2, 3, 4, and 5 (seconds). Sending File Ty p e Select the file type that will be saved when a motion is detected.
54 2.3.2 Motion Region Y ou can define the motion detection r egion within the image that camera captures, so this camera will ignore mo tions which are not covered by the motion region setting, and reduce t he chances of false alarm.
55 Sensitivity Move the slide bar to change the motion detection sensitivity setting: Drag the s lide to the right to increase sensitivity (camera will detect minor changes in the image), and drag the slide to the left to decrease sensitivity (camera will only detect major changes in the image).
56 2.3.3 Email Y ou can define the destination addre ss of E-mail sending and mail server parameters here. The descriptions of every setting in this menu will be given below: Item Description Recipient E-Mail Address Input the email recipien t’ s Email address here.
57 server requires you to do so , please select ‘Enable’, or select ‘Disable’ to disable it. If you don’t know , please refer to the SMTP server y ou’re using in your Email software (like Outlook, Outlook Express etc.), or ask yo ur network administrator or ISP .
58 2.3.4 FTP Configuration Y ou can set FTP server ’s p aram eters here. The descriptions of every setting in this menu will be given below: Item Description FTP Server Input the IP address or host name of the FTP server you wish to use here. FTP Port Input the port number of the FTP server you wish to use here.
59 found that non-passive mode is not working, you can try to use passive mode. Click ‘Apply’ to save settings and make the new settings take effect. After that, you can click ‘Upload a test file ’ to send a file to the FTP server you set here, so you can make sure the se tting you specified here is correct and working.
60 2.3.5 SD Card Configuration Y ou can define the filename and destination folder when saving a file in SD card. The descriptions of every setting in this menu will be given below: Item Description E.
61 2.4 System Info Y ou can use this menu to get the oper ational information of this camera: After you selected ‘System Info.’, a sub-menu will appear . There are 4 sub-menus available here: Detailed descriptions of ever y setting will be given below .
62 2.4.1 Camera Information Camera information allows you to se t the name and administrator ’s p assword of this camera. The descriptions of every setting in this menu will be given below: Item Description Camera Name Please specify the nam e of this Network Camera here.
63 2.4.2 Date / T ime Setting This setting allows you to change the dat e and time of the r eal time clock in this Network Camera. Y ou can set the time manually , or use network time protocol (NTP) to set the time automatically .
64 T ime ‘Y es’; otherwise select ‘No’. Synchronize to PC time Click to input current time of y our computer to ‘Set Date / T ime manually’ field.
65 T ime Interval Y ou can choose to upload one image to FTP server according to the time interv al you wish, or choose to upload image as you wish to FTP server every second.
66 2.4.4 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the Network Camera, and switch LED lights on/of f. The descriptions of every setting in this menu will be given .
67 setting of your computer if the IP address of your computer does not begin wit h ‘192.168.2’ , and subnet mask is not ‘255.255.255.0’, or you’ ll not be able to connect to this Network Camera again.
68 2.4.6 System Log All activities of this network came ra will be logged, and you are allowed to enter ‘System Log’ menu to view these logs. 2.5 Account If you wish to allow other people to view .
69 The descriptions of every setting in this menu will be given below: Item Description User List Lists all users currently available. Login Input the login name (user name) of this account. Password Input the p assword of this user here. Confirm password Input the p assword of this user here again for confirmation.
70 2.6 SDHC … After you selected ‘System Info.’, a sub-menu will appear . There are 4 sub-menus available here: Please click the SD card setting you wish to set then refer to instructions given .
71 2.6.1 S tatus Here shows the remaining card sp ace for you..
72 2.6.2 S pace Alarm When you’re using SD card to stor e captured image and video clip, you can have this camera to send an E-mail to you when there’ s only little remaining space lef t on SD card.
73 SMTP Authentication Select ‘Enable’ if the SMTP server you’re using requires authentication, and input the username and password below; If the SMTP server y ou’re using does not require authentication, select ‘Disable’ here. If you’re not sure, ask your ISP or network administrator .
74 2.6.3 File Management Y ou can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be given below: Item Description FirstPage Jump to first page of file list. PrevPage Jump to previous page of file list.
75 Chapter III: Using Surveillance Sof tware 3-1 Installing Network Camera Surveillance Software The Network Camera surveillance softwa re provides various functions like video recording, after this sof tware is installed, you can use your Network Camera to safeguard your property .
76 3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click ‘Next’ to continue.
77 4. Here lists all options you chose in pr evious step s, if ev erything’s correct, click ‘Install’ to start installing procedure, or click ‘Back’ to go back to previous step to modify installing settings. 5. The inst alling procedure will take some ti me, please be patient.
78 6. When you see this window , it means the software inst alling procedure is complete. Please click ‘Finish’ to finish the procedure (Network Camera surveillance software will start af ter you clic k ‘Finish’ button, if you want to start it later , uncheck ‘Launch IPCa m Surveillance Software’ box).
79 3-2 Using Network Camera surveillance software Y ou can click ‘IPCam Surveillance So ftware’ icon from desktop, quick launch bar , or start menu to st art the Network Camera surveillance software.
80 Y ou can put the mouse cursor on a ce rtain component and see its button name, and here’re detailed descriptions of all buttons: Item Description V ideo displaying area The image of all connected cameras will be displayed here. Language Select a language from this dropdown menu to change display language.
81 Playback Playback a recorded video file. Snapshot T ake a snap shot of current camera. Message display Displays all system messages like camera is disconnected etc. Close window (stop surveillance) T erminates Network Camera surveillance sof tware.
82 3-3 Configure Network Came ra surveillance software 3-3-1 Configure cameras Before you use this Network Camera surveillance software, you must configure the camera(s) you wish to c onnect.
83 3-3-1-1 ‘Camera’ tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously: Here are the descriptions of all setting items: Item Description Channel Select the channel number you wish to set.
84 name of camera so you can remember the camera’ s location of purpose easily . Model Displays the model of sele cted camera, this field can not be changed. IP* Input the IP address of camera. Username* Input the us er name of camera. Web Port* Input the web port of t he camera.
85 3-3-1-2 Schedule Recording In this tab, you can setup scheduled vi deo recording, so you can record the video captured by all cameras y ou have by a pre-defined schedule. Here are the descriptions of all setting items: Item Description Channel Select the channel number you wish to set.
86 Please specify the time duration of this one-time schedule (the date and time of ‘From’ and ‘T o’), then click ‘OK’ to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past.
87 Please check all weekdays that applies, and set the start time in ‘From’ field. Y ou can set the duration of video recording in ‘Period’ fiel d (format is HH:MM:SS), and the end time will be calculated automatically and displayed in ‘T o’ field.
88 3-3-1-3 Audio For cameras that support audi o, you can use this tab to decide if you wish to hear the audio captured by selected camera. Here are the descriptions of all setting items: Item Description Channel Select the channel number you wish to set.
89 3-3-1-4 Motion Record With this function activated, only mo tions captured by the camera will be recorded, so you don’t have to waste hard disk storage sp ace on images you don’t need to pay attention to. Here are the descriptions of all setting items: Item Description Channel Select the channel number you wish to set.
90 triggered Send mail when motion is triggered Send an email to a pre-defined address when a motion has been detected by the camera. OK Save settings in this tab.
91 3-3-2 General Settings Y ou can set system-wide settings of this Network Camera surveillance software in this menu. 3-3-2-1 ‘General’ tab All general settings like file storage di rectory and recording spaces can be set here.
92 video. Scan T ime Define the time period to p ause between every camera switch when you activate ‘Scan’ function. Cycle Recording Y ou can decide the behavior when hard disk space is full: Disable: Do not overwrite recorded video files. Enable: Overwrite recorded video files.
93 3-3-2-2 ‘E-Mail Setting’ tab If you want to use motion detection f unction and wish to get an email that contains the image captured by the came ra, please setup your email related parameters here first. Here are the descriptions of all setting items: Item Description E-Mail Subject S pecify the subject of sending email.
94 Edit Select an email address from ‘Recipient E-Mail Address’ box, and click ‘Edit’ to edit the email address. Delete Delete selected email address. Sender E-Mail Address S pecify the email address of email sender . SMTP Server S pecify the IP address or host name of the SMTP server you wish to use.
95 3-3-2-3 Security If you don’t want other people to access this Network Camera surveillance software, you can set a p assword to protect it. Y ou’ll need to input the password ever y time you wi.
96 Here are the descriptions of all setting items: Item Description Enable Requires password aut hentication when this sof tware start s. Disable Password authent ication is not required when this software st arts. Password Input the p assword you wish to use here.
97 3-4 Change Display Layout This Network Camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and ca mera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly .
98 Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras. Layout style 5: 9 Cameras Displays the video of up to 9 cameras. Layout style 6: 10 Cameras Displays the video of up to 10 cameras.
99 Layout style 7: 13 Cameras Displays the video of up to 13 cameras. Layout style 8: 16 Cameras Displays the video of up to 16 cameras..
100 3-5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click ‘Full Screen’ butt on to switch display mode to full-screen mode.
101 3-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you c an click ‘Scan’ button to switch between all configured cameras. Click ‘Scan’ button once to activate scan function (scan icon will become blue ), click again to stop scanning (scan icon will become white ).
102 3-7 Zoom-in / Zoom-out For cameras that support zoom-in / z oom-out function, you can use this function to see more objects that fall in the scope of camera’ s view , or enlarge the image size of a certain object to see it s detail.
103 3-8 PTZ For cameras that support p an - tilt function ( but this model doesn’t support PTZ function), you can change the posit ion that camera points to, to see different places that fall in the scope of camera’ s view .
104 3-9 Snapshot Y ou can take a snap shot of selected camera and save it to ‘Snapshot’ sub-folder of pre-defined data directory . Click snapshot button once to t ake a snapshot; you can t ake as much snapshot as you want before hard disk is full.
105 3-10 Recording Y ou can start video recording of selected camera manually by clicking ‘S tart Recording’ button: When recording start s, you’ll see a message displayed in message displaying box like ‘1/1 10:00:00, Camera 2 S tart Manual’, which means camera 1 start s recording manually on 1/1 at 10:00:00.
106 3-1 1 Vi deo Playback Y ou can playback all recorded video by clicking this button. A new window will appear: Y ou have to search the video file before y ou can play it.
107 Chapter IV : How to Access the Network Camera Remotely with iPhone & Android Phones IC-31 10 series features smart phone support for iPhone users and Android phone users to monitor their home us ing Edimax Network-Cameras. Please check following instruction for installation.
108 in the I-Phone. T o apply for this, refer to the Appendix “How to apply for a free DNS account in the http://www .dyndns.org ” In this guide, we assume you have already got http://my-name.
109 Configure the Broadband Rout er based on the following:.
11 0 4.1 iPhone App Installation (1) Please download ‘Ediview’ applic ation from Apple’s Appstore (2) Y ou can launch EdiView by clicking ‘EdiVi ew’ icon. Y ou’ll see welcome screen and please wait for few seconds (3) When you launch EdiView , it will attempt to connect to existing configured network cameras.
111 point if your Edimax network camera is located on your local area network. If you want search for network camer as on your local area network, or you want to add an Ediamx netw ork camera on Inter.
11 2 (5) Y ou can manage network cameras in ‘Cameras’ list. T o add a new network camera, click ‘Add New Camera’. (6) EdiV iew will search for network ca mera on your local area network, and list all network cameras found here. T o add an network camera manually or add an network camera on Internet, click ‘Add Camera Manually’ button.
11 3 (7) In this page, you can input network camera’ s parameters manually Camera T ype: Switch operating mode between Cloud and IP . In cloud mode you have to input Cloud ID**; In IP mode you have to input IP address or host name of network camera.
11 4 (8) Y ou can also setup video parameters of this network camera. Brightness: Select vide o brightness (1 to 5, darkest to brightest). Saturation: Select video saturation (1 to 5, lo west to highest). Sharpness: Select video sharpness (1 to 5, lowest to highest).
11 5 (9) T o delete an existing IP camera , click ‘Edit’ button. Click of the IP camera you wish to delete (10) Click ‘Delete’ button to delete IP camera.
11 6 (11) Now you c an back to ‘Live’ menu, if you see a snapshot appear , it indicates the network camera is correctly configured. Click snap shot picture to enlarge video view (12) If network ca.
11 7 A w hite arrow w ill also appear to indicate the direction of camera movement. Please note: If the button appears on upper-right corner shows ‘Switch’, you can’t move camera.
11 8 (15) Event’s snapshot and event date / time will be displayed. Click the button with network camera’ s name (uppe r-left corner) to go back..
11 9 (16) Y ou can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily . Please note that you need active Inte rnet connection to show map on your iPhone. Click ‘Map’ button at the bottom of your iPhone to access Map menu.
120 If you’re using y our iPhone indoor , your iPhone may fail to locate y our location. Y ou can still use your fi nger to drag the map and find your current location manually .
121 4.2 Android App installation (1) T o inst all Ediview application, launch ‘Market’. (In your Android device’s ‘All apps’ menu) (2) Click magnifier icon at upper-right co rner of Android .
122 (3) Y ou should able able to find Ediview utility (If not, please check spelling), and click ‘Download’ to download and install Ediview (4) Android will prompt you to confirm in stallation, pl.
123 (5) Please be patient while EdiV iew is being installed. (6) When EdiView utility is successfully installed, you’ll see this message. Click ‘Open’ to launch EdiView utility now , or click .
124 (7) Y ou can launch EdiView by clicking ‘EdiV iew’ icon in ‘All Applications (8) When you launch EdiView , it will search for all Edimax network cameras on your network. Please make sure you’re connected to wireless access point if your Edimax network camera is located on your local area network.
125 If you want to add a Ediamx netw ork camera on Internet, please click ‘Manually’ button to abort and setup netw ork camera manually (9) In this page, you can input network camera’ s paramete.
126 (10) When an network camera has been added s uccessfully , you’ll see it appear in EdiView utility’ s camera list Please repeat last step to add mo re network cameras you wish to connect.
127 If there are new events available, click icon T o configure network camera’ s p arameters, click icon (12) When you click an network camera in camera list, you’ll see its live image Like this. Y ou can hold your Android device horizontally to enlarge network camera’ s live image view .
128 (13) T o take a snap shot of current live image and save it on your Android device, click button. Y ou’ll see ‘Save Snapshot’ message appear , which indicates a snapshot has been t aken.
129 (14) If you have more than 1 net work cameras, you can click button and you can see the image of up to 4 network cameras at the same time; Click on the camera’ s image to enlarge it Y ou can also click button to see up to 12 ne tw ork cameras at the same time.
130 Click ‘Done’ button when you finish, or click ‘Cancel’ to abort. Y ou’ll see the result af ter you click Done’ . (16) When a new event (movement) ha s been detected by network camera, you’ll see icon appear in network camera list. Y ou can click it to see events .
131 (17) All events will be disp layed here, with the time which triggered this event. Click on the event to see enlarged picture (18) The image of this even t will be displa yed with the time triggered this event.
132 (19) T o save a snapshot of this event, click button. Y ou’ll see ‘Saved event image successfully’ message to prompt you that image has been saved successfully . (20) When you’re in camera list, press ‘Menu’ button on your Android device.
133 (21) Y ou can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily . Please note that you need active Internet connection to show map on your Android device.
134 (22) Google map will be shown on you r Android device, and it will attempt to locate your current location by GPS and network If you’re using your Android device i ndoor , your A may fail to locate your location. Y ou can still use your finger to drag the map and find your current location manually .
135 (23) When you found the location wher e net work camera is installed, press ‘Menu’ button on your Android device and click ‘Locate’ button and a camera list will be shown.
136 4.3 Web browser inst allation Please make sure your web browser suppo rts JA V A first. If your web browser does not support JA V A, you can install JA V A from website: www .
137 (2) Input the following web address in your web browser ’ s address bar: “XXXXXXXXXXXX.myedimax.com”. Where XXXXXXXXXXXX is the 12 characte rs of your Edimax network camera’ s MAC address.
138 (5) Y ou should be able to see the image of network camera now . Y ou can click function buttons below . Enlarge / reduce image size Click + or – button to enlarge or reduce image size, this is very useful when you want to see details of certain object in the image.
139 Configure network camera Click this button to display network ca mera configuration menu and you can chage the parameters of IP camera. Cli ck ‘Apply’ to save changes or click ‘Cancel’ to discard changes. Pan-tilt control Click this button and a set of arrow will be shown on the image.
140 Snap shot Click this button to take a snap shot of current image and save on your computer ’s hard drive. Y ou’ll be prompted to select a folder on your computer . Full-screen view Click this button to enlarge image view to full-screen size, all functino buttons will disappear to maximumize display area.
141 Chapter V : Appendix 5.1 S pecifications Max Resolution: 1280 x 1024 pixels Sensor: 1.3Mega pixels 1/4" color CMOS sensor Gain control: Automatic Exposure: Automatic White Balance: Automatic Image (Video Setting) Image compression: MJPEG/MPEG4/H.
142 5.2 How to apply for a free DNS acc ount at http://www .no-ip.com It’ s very likely your IP address (the Internet l ocation) keeps changing every a couple of hours or every day depending on your ISP’ s policy . Therefore, as shown in the following figure, you may be assigned with an IP address, “61.
143 And follow the steps: Now , you could locate your home network camera using http://your-name.no-ip.org.
144 5.3 Troubleshooting If the network camera is not working properly, before you contact the dealer of purchase for help, please check the tr oubleshooting list here, this may help you to solve the problem by yourself and therefore saves your valuable time.
145 c. If you’re connecting this camera from Internet, it could be caused by a slow Internet connection, and it’s not a problem caused by camera. However, when the network connection is slow, you should use lower frame rate / resolution. d. Adjust the antenna if you’re using wireless connection.
146 camera is located, switch it on and see if image looks better. I set the network camera to send image by Email or FTP, but nothing is received a. If the image is send by Email, please make sure it’s not blocked by any anti-spam mechanism.
147.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Edimax IC-3110P è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Edimax IC-3110P - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Edimax IC-3110P imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Edimax IC-3110P ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Edimax IC-3110P, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Edimax IC-3110P.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Edimax IC-3110P. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Edimax IC-3110P insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
