Manuale d’uso / di manutenzione del prodotto CD8053 del fabbricante Eclipse - Fujitsu Ten
Vai alla pagina of 132
OWNER'S MANUAL We appreciate your purchase of this tuner. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
For y our safety in using the CD8053 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD8053. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. • To prevent accidents, store batteries for the remote control out of the reach of small children.
4 • To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result. • When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems.
5 • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident. • Keep foreign objects out of the disc slot. They may cause fire or electrical shock.
6 • Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting, resulting in smoke or fire.
7 T able of Contents Operating precautions...............................................10 Notes on operation .......................................................................10 About compact discs ..............................................
8 How to operate the MP3 player ................................48 About MP3....................................................................................48 Listening to MP3 file ..................................................................
9 How to use an optional Card remote control ........106 Turning the power on/off ............................................................106 Adjusting the audio volume ........................................................106 Switching playback modes .
10 Operating precautions <Your CD8053 will perform well over a long period of time through correct handling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard. • We recommend using with this player a disc with the logo shown to the left.
11 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback.
12 Operating precautions About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “improving sound performance” or “protecting CDs.” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player.
13 Operating precautions About borrowed CDs • Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get stuck inside or damage the deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot.
14 Names of controls and parts Fr ont view With the fr ont open Never place an object or rest your hands or the like on the front panel. Caution Names of contr ols and par ts Switches disc modes and switches to AUX mode. Activates and deactivates mute.
15 ESN (Key CD) security operating procedure How to pr ogram the Ke y CD Check that the Power is OFF. 1 Press and hold button [6], then the [FUNC] button, and hold both for more than one second. 2 A [SEC] message appears, then in two seconds it will change to [DISC].
16 ESN (Key CD) security operating procedure How to cancel the K ey CD Turn OFF the Power. 1 Press and hold button [6], then the [FUNC] button, and hold both for more than one second. 2 A [SEC] message appears, then in two seconds it will change to [DISC].
17 ESN (Key CD) security operating procedure How to c hange the Key CD First, cancel the existing Key CD. 1 Refer to “ How to cancel the Key CD. ” Next, program a new Key CD.
18 ESN (Key CD) security operating procedure What happens if an incorrect CD is inser ted? An [ERR] message will be appear, then change to a flashing [DISC], then the CD will be ejected. 1 You will have five uninterrupted attempts to insert the correct CD.
19 ESN (Key CD) security operating procedure How to turn the security indicator on/off With the power OFF, press button [2], then the [FUNC] button and hold both for more than one second. 1 [IND. FLASH] or [IND. -----] appears on the display. 2 [IND. FLASH] means the security indicator will flash when the vehicle ’ s ignition is off, and [IND.
20 Basic operation When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. When the vehicle has no ACC position on the ignition switch, care is needed when turning off the deck. Follow Step 2 or Step 3 when turning off the power.
21 Basic operation Listening to a CD Press the [OPEN] button. 1 The front panel opens. Insert a CD into the disc slot, label side up. 2 The CD will immediately start playing. ATTENTION When a CD is already loaded, press the [DISC] button to switch to the CD mode.
22 Basic operation Listening to the tuner Press the [FM AM] button. 1 This will turn the tuner on. Press the [FM AM] button to switch to the desired FM or AM bands. 2 For example, radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM1 with each press of the button.
23 Basic operation Warning Adjusting audio v olume Turn the [AUDIO CONTROL] button to the left or right. 1 Turn to the right: Increases the volume. Turn to the left: Decreases the volume.
24 Basic operation Various audio control modes may be fine-tuned using this procedure. Modes will switch in the order shown below each time the button is pressed. Switching audio contr ol modes Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted.
25 Basic operation Adjusts treble level. In pro mode, treble can be adjusted for each source (CDP/CDC, FM and AM). Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes high sounds. Turn to the left: Softens high sounds. TREB (TREBLE) Mode Adjusts left/right speaker balance.
26 Basic operation ATTENTION To disable the loudness feature, repeat the above procedure to display the [LOUD OFF] indication. The loudness control may be turned on to emphasize low and high frequencies at low volume levels.
27 Basic operation This mode lets you adjust the display brightness, change the button illumination color and turn the display on and off. Enters display adjustment mode. Making changes with Displa y Adjustment Mode Press the [DISP] button for less than one second.
28 Basic operation [DISP] button [RTN] button You can change the button illumination color in the following way. Turn the [SEL] button to select ILL. The selected item will be highlighted. Press the [SEL] button. The screen for changing the illumination color will appear.
29 Basic operation You can turn the display on and off in the following way. Turn the [SEL] button to select Disp on/off. The selected item will be highlighted. Press the [SEL] button. The screen for turning the screen display on and off will appear. Turn the [SEL] button to select ON or OFF.
30 Basic operation A variety of settings can be changed. The function mode is activated. When the button is turned, the setting item changes in the following order and the selected item is highlighted. Making changes with Function Mode Press the [FUNC] button.
31 Basic operation The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure: Turn the [SEL] button to select Guide Tone. The selected item will be highlighted.
32 Basic operation [RTN] button [FUNC] button Switches the clock display to ON/OFF. Turn the [SEL] button to select Clock on/off. The selected item will be highlighted. Press the [SEL] button. The clock display ON/OFF mode is activated. Turn the [SEL] button to select ON or OFF.
33 Basic operation This receiver uses the 12-hour display notation. Turn the [SEL] button to select Clock Adjust. The selected item will be highlighted. Press the [SEL] button. The clock adjustment mode is activated. Turn the [SEL] button to display the item to be selected for adjustment.
34 Basic operation Others Enabling E-COM feature Press the [E-COM] button for one second. Pressing the button will switch the E-COM feature on or off. 1 Adjustment of the front panel angle Press and hold the [OPEN] button for more than one second. While holding the button, the front panel opens regardless of the stage.
35 Basic operation If memos have been set, a memo recorded corresponding to a number button [1] to [5] appears on the screen when the number button is pressed briefly while the power of the main unit is turned off. Displaying a memo Press and hold any number button for more than two seconds while in the Standby mode.
36 Basic operation Press the number button corresponding to the memo to be deleted for two seconds while the power is turned off. Press the [6] button for more than two seconds. The memo will be deleted. 2 1 Deleting a memo Press the [RTN] button. Memo settings are now completed.
You can change the details that are shown in display mode in the following way. Press the [DISP] button for one second or more. Each time the button is pressed in this way, the display switches between A mode and B mode. A mode: I n this mode, the preset button functions are displayed.
38 How to operate the CD player Listening to CDs Press the [DISC] button. 1 First press the [DISC] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit.
39 How to operate the CD player Adv ancing to the next trac k or returning to the beginning of the trac k being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track. Turn to the left: Returns to the beginning of the track being played.
40 How to operate the CD player Repeating the same trac k (REPEA T) Press button [5] to repeat the track being played. 1 To cancel, press button [5] again. Pla ying tracks in random or der (RANDOM) Press button [6] to play the tracks in random order. 1 To cancel, press button [6] again.
41 How to operate the CD player Ejecting the disc Press the [OPEN] button for less than one second. 1 The front panel opens fully and ejects the disc. Switching a CD to pause / pla y Press button [3]. 1 It pauses playing a CD. To cancel, press button [3] again.
42 How to operate the CD player Creating a title f or a CD Press the [FUNC] button while in the disc mode. 1 Press the [SEEK ] button to select the character type. 4 Pressing the button will switch types from [ABC] (alphabet characters) to [123] (numeric characters) and then [!&?] (symbols).
43 How to operate the CD player Turn the [SEL] button to the left or right to select characters. 6 Turn to the right: Advances the character forward in its type.
44 How to operate the CD player Changing a previousl y set title Press the [FUNC] button while in the disc mode. 1 Press either [SEL] or [FAST ] button to move the cursor to the position in the title for inserting or changing characters. 4 [SEL] button: Moves the cursor to the right.
45 How to operate the CD player Deleting a previousl y created title Press the [FUNC] button while in the disc mode. 1 Hold the [6] button down for more than two seconds. 4 The title has now been deleted. If external CD changers are connected, a previously created title for a CD will be deleted in the same way.
46 How to operate the CD player Changing the number of CD titles Press the [FUNC] button while in the disc mode. 1 Turn the [SEL] button to select Memory Func. 2 Press the [SEL] button. 3 Turn the [SEL] button to select an address from A to E. 4 The selected item will be highlighted.
47 How to operate the CD player Displa ying CD text Press the [DISP] button for more than one second. 1 Pressing the [DISP] button while text is displayed scrolls the display in the order DISC title ➔ TRACK title, and then the display stops with the TRACK title.
48 How to operate the MP3 player ATTENTION The making of MP3 files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited.
49 How to operate the MP3 player Media capable of playing MP3 includes CD-ROM and CD-R discs. Compared to CD-ROM media commonly used for music discs, CD-R discs are fragile in high temperature/high humidity environments and one section of the CD-R may become incapable of playback.
50 How to operate the MP3 player Only files with the MP3 file extension ".mp3" can be recognized as MP3 and played. Be sure to save MP3 files with the ".mp3" file extension. The "MP" letters of the file extension will be recognized whether entered as uppercase letters or lowercase letters.
51 How to operate the MP3 player Listening to MP3 file Press the [DISC] button. 1 This starts MP3 file play. If an external CD changer is connected, each additional press of the [DISC] button will switch modes from CD changer 1 ➔ CD changer 2 ➔ CD player.
52 How to operate the MP3 player Adv ancing to the next trac k (file) or returning to the beginning of the trac k (file) being playe d Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track (file). Turn to the left: Returns to the beginning of the track (file) being played.
53 How to operate the MP3 player Press the button briefly to play just the first 10 seconds of each song for all the files in the same layer of the folder being played. Pressing the button until [FOLDER SCAN] is displayed will play just the first 10 seconds of the first song in each folder.
54 How to operate the MP3 player Press the button briefly to randomly play the files in the same layer as the folder being played. Pressing the button until [FOLDER RAND] is displayed will randomly play the files in all the folders. To cancel, press button [6] again.
55 How to operate the MP3 player The title display details and display mode change as follows each time the button is pressed. (Refer to page 37 for details on the display mode.) *: The display area shows a maximum of 10 characters and then scrolls to display the remaining characters.
56 How to operate the tuner T uning to a station First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.
57 How to operate the tuner Press the [SEL] button for more than one second until a beep is heard. 2 The automatic preset mode starts. The [ASM ON] indicator on the screen flashes, and stations are automatically entered in memory under buttons [1] to [6].
58 How to operate the tuner Manuall y setting stations into memory Press the [FM AM] button to switch between FM and AM. 1 Turn the [SEL] button to the right or left to tune to the station to be entered in memory. 2 This section covers the setting of stations in memory under the numbered buttons.
59 How to operate the tuner Preset station scan Press the [SEL] button for less than one second. 1 [P SCAN] will appear at the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each. To stop the preset scan mode at a desired station, press the [SEL] button again.
60 How to operate the tuner Setting a station name Press the [FUNC] button while in the tuner mode. 1 Turn the [SEL] button to select Station Name. 2 Press the [SEL] button.
61 How to operate the tuner Turn the [SEL] button to the left or right to select characters. 6 Turn to the right: Advances the character forward in its type.
62 How to operate the tuner Deleting a station name Press the [FUNC] button while in the tuner mode. 1 Hold the [6] button down for more than two seconds. 4 The station name has now been deleted. Turn the [SEL] button to select Station Name. 2 Press the [SEL] button.
63 How to operate the tuner Changing the number of bands Press the [FUNC] button while in the disc mode. 1 Turn the [SEL] button to select Memory Func. 2 Press the [SEL] button. 3 Turn the [SEL] button to select an address from A to E. 4 The selected item will be highlighted.
64 How to operate the tuner FM reception characteristics A characteristic of transmitted signals is that lower frequencies travel further. FM frequencies are much higher than AM ’ s (similar to a ray of light): they won ’ t bend but they will reflect.
65 How to operate the tuner A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna. In a moving vehicle, the area for good reception is limi.
66 How to operate the Sound Adjustment Mode About Sound Adjustment Mode Ho w to operate the Sound Adjustment Mode Normal mode Pro mode ○ (See page 74) × Graphic equalizer ○ (Simplified) (See page.
67 How to operate the Sound Adjustment Mode A variety of materials are used inside a vehicle to manufacture the seats and windows, and because these materials absorb and reflect sound in different ways, the parametric equalizer lets you adjust the peaks and dips of the frequency characteristics inside the vehicle to compensate for this.
68 How to operate the Sound Adjustment Mode When this unit is in normal mode, a single parametric equalizer function is available in addition to the 13-band graphic equalizer, so that points that cannot be adjusted using the graphic equalizer can be corrected using the single-band parametric equalizer.
69 How to operate the Sound Adjustment Mode With vehicle audio systems, the installation position of the speakers and the position of the listener mean that the distances from the listener to the left and right speakers are almost always different.
70 How to operate the Sound Adjustment Mode For example, when adjusting the HPF, frequencies that are lower than the specified frequency are progressively dampened, rather than simply not being played back at all. The "slope" adjustment function is the function that is used to adjust these dampening characteristics.
71 How to operate the Sound Adjustment Mode • The crossover function is a filter that allocates specified frequency bands. • A high-pass filter (HPF) is a filter that cuts out frequencies that are lower than the specified frequency (bass range) and allows higher frequencies (treble range) to pass through.
72 How to operate the Sound Adjustment Mode When original sounds are converted to MP3 format, frequency ranges that are not normally audible to the human ear are compressed. The MP3 harmonizer can be used to play back these compressed sounds at as close to their original form as possible so that clear and powerful sound can be enjoyed.
73 How to operate the Sound Adjustment Mode [SOUND] button Operations during Normal Mode Turn the [SEL] button to select a setting item. 3 When the button is turned, the setting item changes in the following order and the selected item is highlighted.
74 How to operate the Sound Adjustment Mode EQ (equalizer) mode can be used to adjust the frequency of the audio channels being played back in accordance with the genre and instruments of the music being played.
75 How to operate the Sound Adjustment Mode Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] button for less than one second to exit sound adjustment mode. 5 4 ATTENTION The initial EQ settings are factory preset.
76 How to operate the Sound Adjustment Mode Selecting an equalizer mode from memory Press a preset button to select the equalizer mode set in memory for the button. The buttons that set equalizer modes in memory are called preset buttons. Turn the [SEL] button to select EQ.
77 How to operate the Sound Adjustment Mode [SEL] button [SEEK ] button [FAST ] button Making fine adjustments to the parametric equalizer You can select and adjust frequencies using the parametric equalizer (single-band). Turn the [SEL] button to select EQ and press the [SEL] button.
78 How to operate the Sound Adjustment Mode [SEL] button Press the [SEL] button for more than one second. The mode will return to equalizer setting mode. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] button for less than one second to exit sound adjustment mode.
79 How to operate the Sound Adjustment Mode This function corrects the position characteristics and frequency characteristics in order to delay the signals being output from the various speakers so that the signals from each speaker reach the listening position at the same time.
80 How to operate the Sound Adjustment Mode Position selector setting (Position) When the position of the listener's seat is selected, the time taken for the sound to travel from the speakers to the listener can then be adjusted in order to obtain a more natural sound orientation.
81 How to operate the Sound Adjustment Mode [SOUND] button [RTN] button [SEL] button Press the [RTN] button. Other time alignment items can be set at this time. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] button for less than one second to exit sound adjustment mode.
82 How to operate the Sound Adjustment Mode Press the [RTN] button. Other time alignment items can be set at this time. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] button for less than one second to exit sound adjustment mode.
83 How to operate the Sound Adjustment Mode Press the [RTN] button. Other time alignment items can be set at this time. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] button for less than one second to exit sound adjustment mode.
84 How to operate the Sound Adjustment Mode The frequencies for the front and rear speaker high-pass filter (HPF) and woofer low-pass filter (LPF) can be set within a range of 63 to 200 Hz. (This is the same as the HPF and LPF cutoff frequencies.) Turn the [SEL] button to select X-Over.
85 How to operate the Sound Adjustment Mode The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony. Turn the [SEL] button to select Non-F Phase.
86 How to operate the Sound Adjustment Mode Operations during Pr o Mode Turn the [SEL] button to select a setting item. 3 When the button is turned, the setting item changes in the following order and the selected item is highlighted. Press the [SOUND] button for less than one second.
87 How to operate the Sound Adjustment Mode Mid-Band (Group-1) Parametric adjustment in 5-Bands of 25 Frequencies. Hi-Band (Group-2) Parametric adjustment in 5-Bands of 20 Frequencies. Eclipse has by default assigned arbitrary frequencies for each of the 5-Bands (Hi/Mid for 10 parametric bands total).
88 How to operate the Sound Adjustment Mode There are 10 Mid & Hi-Frequency locations (5 + 5) available for the parametric equalizer. The Parametric Equalizer is divided into two groups Mid & Hi. Any frequency assigned is highlighted in White, and is unavailable for use elsewhere.
89 How to operate the Sound Adjustment Mode Turn the [SEL] button to select PEQ. The selected item will be highlighted. Press the [SEL] button. The mode will change to parametric equalizer adjustment mode. Press the [SEL] button for less than one second to select the channel and band to be adjusted.
90 How to operate the Sound Adjustment Mode ATTENTION When updating software, press the [DISP] button to measure and display the frequency characteristics. Press the [SEEK /FAST ] button. This adjusts the frequency level. [SEEK ] button: Increases level.
91 How to operate the Sound Adjustment Mode Selecting an equalizer mode from memory Press a preset button to select the equalizer mode set in memory for the button. The buttons that set equalizer modes in memory are called preset buttons. Turn the [SEL] button to select PEQ.
92 How to operate the Sound Adjustment Mode The delay time and level of the sound from each speaker can be adjusted in order to correct any phase mismatches in the sound resulting from the listening position. Turn the [SEL] button to select Time Alignment.
93 How to operate the Sound Adjustment Mode Refer to the following for the method of calculating the delay time. A = (B - C) / 34 A: Delay time (ms) B: Distance from listening position to furthest spe.
94 How to operate the Sound Adjustment Mode This adjustment is for 3-way speaker system which uses different speakers for different ranges (treble range: tweeters, medium range: Mid, bass range: woofers).
95 How to operate the Sound Adjustment Mode Press the [SEEK /FAST ] buttons to set the slope. [SEEK ] button : The slope becomes more gentle. [FAST ] button : The slope becomes steeper. The slope can be set to "PASS", "6dB/oct", "12dB/oct", "18dB/oct" or "24dB/oct".
96 How to operate the Sound Adjustment Mode This function uses harmonic synthesis to restore the high- frequency component that is lost as a result of the compression process so that fresher sound can be obtained during MP3 playback. Turn the [SEL] button to select MP3 Harmonizer.
97 How to operate the Sound Adjustment Mode The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony. Turn the [SEL] button to select Non-F Phase.
98 How to use the NOB remote control Cleaning the remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.
99 How to use the NOB remote control [MUTE] button Cutting the v olume instantly (m uting) Press the [MUTE] button for more than one second to cut the volume or restore it instantly.
100 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [MODE] button [BAND] button Switching pla yback modes How to pla y the tuner Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc AUX Selecting the FM/AM band Press the [BAND] button.
101 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [ TUNE • SEEK ] buttons [ DISC ] buttons [BAND] button Selecting a station (manuall y or automatically) A short press of the button will allow manual station tuning.
102 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [E-COM] button [ILLUMI] button [ DISC ] buttons [ TRACK ] buttons Adv ancing to the next trac k or returning to the beginning of the track being pla yed Press the [ TRACK ] button.
103 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [SEL] button [FUNC] button [RTN] button [ DISC ] buttons [ TRACK ] buttons Switching the remote contr ol settings Press the [FUNC] button of the main unit.
104 How to use the NOB remote control Warning To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor immediately. Replacing the battery Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow.
105 How to use the NOB remote control • Be extremely careful not to swallow the battery. • The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lamp gets dim, replace the batteries.
106 How to use an optional Card remote control [PWR] button [MUTE] button [+] button [ - ] button Remote-control light receptor T urning the power on/off Press the [PWR] button.
107 How to use an optional Card remote control [MODE] button [BAND] button Switching pla yback modes Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc AUX How to pla y the tuner Selecting the FM/AM band Press the [BAND] button.
108 How to use an optional Card remote control [BAND] button [ PRESET CH ] buttons [ TUNE • SEEK ] buttons Selecting a station (manuall y or automatically) Press the [ TUNE • SEEK ] button. [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations.
109 How to use an optional Card remote control [ DISC ] buttons [ TRACK • APS ] buttons [MUTE] button Press the [ TRACK • APS ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played. (Press repeatedly to move to previous tracks.
110 How to use an optional Card remote control [SEL] button [FUNC] button [RTN] button [ DISC ] buttons [ TRACK ] buttons Switching the remote contr ol settings Remote control functions can be switched to the three patterns. Press the [FUNC] button of the main unit.
111 How to use an optional Card remote control Replacing the battery On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carrier with your fingernail. 1 Use one CR2025 battery.
112 How to operate the receiver with an optional CD changer connected Ho w to operate the receiver with an optional CD changer connected This section covers the operation of an optional CD changer that is connected to the receiver. To switch from another mode, press the [DISC] button.
113 How to operate the receiver with an optional CD changer connected Pla ying the beginning of tracks (SCAN) Press button [4]. 1 Pressing the button causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is pressed again.
114 How to operate the receiver with an optional CD changer connected Pla ying tracks in random or der (RANDOM) Press button [6]. 1 Pressing on the button causes the changer to play the tracks on the currently playing CD in random order.
115 How to operate the receiver with an optional CD changer connected Buttons 1 2 3456 C D 123456 7 8 9 1 01 11 2 To select a CD from nos. 7 to 12, press the desired button considerably longer. Press the [SEL] button for less than one second. 1 Press a button from [1] to [6].
116 Others Connecting P or table A udio Play ers to the A UX Jack Turn on the portable audio player and start its play function. 1 Switch to AUX mode by pressing the [DISC] button for more than one second. 2 Activation of the AUX mode will light the "AUX" indicator and channel audio player output to the system speakers.
117 If you have a question: First check the items mentioned below before attempting to troubleshoot problems. If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a sharp tool.
118 If you have a question: Information Code Table When "INFO " flashes on the indicator Nos.2~7 are displayed. Information Contents Explanation and remedial action to take 2 NO DISC LOADED IN There is no disc in the magazine or player. Load THE MAGAZINE a disc in the magazine.
119 If you have a question: Problem Mode Causes Remedial action to take Refer to page Common to all Dead or weak sound Power does not turn on. Frequencies or titles set in memory are deleted. No guide tone sounds. The remote control does not work. Is the volume control up sufficiently? Turn up the volume control.
120 If you have a question: Tuner Problem Mode Causes Remedial action to take Refer to page Receives no stations, or receives static noise. Is the antenna retracted? Extend the antenna. Tune to a station. Tune to a local station. (Please note, there may be no local stations servicing the area where you are currently driving.
121 Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 2A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/8" (178 x 50 x 155mm) Mass (weight) Approx.
122 Before installation No. Item Q'ty 1 Main unit 1 2 Mounting sleeve 1 3 Side bracket 2 4 Rear bracket 1 5 Bezel 1 6 Bushing 1 7 Self-tapping screw (6 x 16 mm) 2 8 Stud bolt 1 9 Phillips type sc.
123 Before installation Installation angle To maintain proper function, the unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, CD skipping and improper CD ejection may occur.
124 Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicle console. 1 Use a screwdriver or a similar tool to bend the tabs in the mounting sleeve to secure the mounting sleeve. 2 Attach the side brackets to the main unit using phillips type screws.
125 Mounting instruction Mount the stud bolt to the main unit. 4 Insert the main unit into the mounting sleeve until it locks in place. 5 Fasten the rear of the main unit using either method [A] or [B].
126 Mounting instruction Names of lead wires and destinations (refer to P age 128) No. Name Wire color Destination 1 ACC Red Connect where the power comes on when the ignition is in the ACC position. 2 B+ Yellow Connect where the power is constantly available, regardless of the ignition switch's position.
127 Mounting instruction System.
128 Mounting instruction CD8053+ CH3083 + P ower Amplifier 1) Pink Black Blue/White Orange/White Blue Red Y ellow 13P 16P CD8053 ANTENNA PLUG 13P 2P CH3083 TO GROUND 3 TO ACC (Power supply) 1 TO BA TT.
129 Mounting instruction CD8053+ CH3083 + P ower Amplifier (f or BALANCE-IN) 2) Pink Black Blue/White Orange/White Blue Red Y ellow 13P 16P CD8053 ANTENNA PLUG 13P 2P CH3083 TO GROUND 3 TO ACC (Power .
130 Mounting instruction CD8053+ CH3083 + P ower Amplifier (f or Pro-operation) 3) Pink Black Blue/White Orange/White Blue Red Y ellow 13P 16P CD8053 ANTENNA PLUG 13P 2P CH3083 TO GROUND 3 TO ACC (Pow.
For y our safety in using the CD8053 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD8053. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
OWNER'S MANUAL We appreciate your purchase of this tuner. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Eclipse - Fujitsu Ten CD8053 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Eclipse - Fujitsu Ten CD8053 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Eclipse - Fujitsu Ten CD8053 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Eclipse - Fujitsu Ten CD8053 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Eclipse - Fujitsu Ten CD8053, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Eclipse - Fujitsu Ten CD8053.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Eclipse - Fujitsu Ten CD8053. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Eclipse - Fujitsu Ten CD8053 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
