Manuale d’uso / di manutenzione del prodotto SRM-266S del fabbricante Echo
Vai alla pagina of 36
W ARNING U sers of this equip ment risk in jury to themselves and o thers if the unit is used im pr operly an d/ or safety p recaution s are not fo l lowed. ECH O provides a n operator ’ s manual an d a s afety man ual. Both must be read and un derstood for p roper and safe o p eration.
2 Copyright© 201 1 By Echo, Incorporated All Rights Reserved. T able of C onTenTs Introduction ................................................................ 2 - The Operator's Manual ....................................... 2 - The Safety manual .
G rass T rimmer /B rush C uTTer 3 O pera tOr ' s M anual W ARNING The safety alert symbol accompanied by the word “W ARNING” calls attention to an act or condi- tion which CAN lead to serious personal injury or death if not avoided.
4 Physical Condition Y our judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection W ear eye protection that meets ANSI Z87.
G rass T rimmer /B rush C uTTer 5 O pera tOr ' s M anual W ARNING Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.
6 equIpmenT W ARNING Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment com- bination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.
G rass T rimmer /B rush C uTTer 7 O pera tOr ' s M anual 2 4 5 6 7 8 9 10 3 Shaft Decal Hot Decal (near mufer) d esCrIpTIon Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc- tions on them.
8 1. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter . 2. GRIP - Rear (right hand) handle. 3 THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged.
G rass T rimmer /B rush C uTTer 9 O pera tOr ' s M anual C onTenTs The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions, installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary .
10 nylon lIne head InsT alla TIon Parts Requir ed: Nylon Line Head. CAUTION W ear Gloves or personal injury may result: • Cutoff knife is sharp. • Gearcase and surrounding area may be hot.
G rass T rimmer /B rush C uTTer 11 O pera tOr ' s M anual MIN SP ACING fronT handle InsT alla TIon NOTE Label shows minimum spacing for front handle location. 1. Position front handle for comfortable operation and secure screws. W ARNING Moving parts can amputate ngers or cause severe injuries.
12 NOTE The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLE and should not be gripped when using or carrying the unit. opera TIon wITh blades Preparing the T rimmer/Brush Cutter for Blade Use W ARNING Blade use DEMANDS specic Brush Cutter conguration.
G rass T rimmer /B rush C uTTer 13 O pera tOr ' s M anual Choosing the Correct Blade W ARNING The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause serious personal injury . Blades MUST be sharp.
14 NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty . Read and follow instructions in the Storage section of this manual.
G rass T rimmer /B rush C uTTer 15 O pera tOr ' s M anual Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline.
16 sT arTInG Cold enGIne W ARNING The attachment will operate immediately when the engine starts, and could result in possible serious injury . Keep movable parts of the attachment away from objects that could become entangled or thrown, and surfaces that could cause loss of control.
G rass T rimmer /B rush C uTTer 17 O pera tOr ' s M anual sT arTInG w arm enGIne The starting procedure is the same as Cold Start except DO NOT close the choke, and do not hold throttle trigger fully depressed. W ARNING The attachment should not move at idle, otherwise serious per- sonal injury may result.
18 W ARNING Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
G rass T rimmer /B rush C uTTer 19 O pera tOr ' s M anual aIr fIl Ter Level 1. Parts r equired: REPOWER TM AIR & FUEL FIL TER KIT . 1. Close choke (cold start position). This prevents dirt from entering the carburetor throat when the air lter is removed.
20 0.65 mm (0.026 in.) sp ark pluG Level 2. Parts Requir ed: REPOWER TM T une-Up Kit IMPOR T ANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) other - wise severe engine damage may occur . 1. Remove spark plug and check for fouling, worn and rounded center electrode.
G rass T rimmer /B rush C uTTer 21 O pera tOr ' s M anual 1. Remove spark plug lead. 2. Remove air cleaner cover . 3. Remove mufer cover (A). 4. Remove engine cover (B). IMPOR T ANT DO NOT use a metal scraper to remove dirt from the cylinder ns.
22 1. Remove spark plug lead. 2. Remove mufer cover (A). 3. Place piston at T op Dead Center (TDC) to prevent carbon/dirt from entering cylinder . 4. Remove spark arrestor screen cover (B), gasket (C), and screen (D), from mufer body . 5. Clean carbon deposits from mufer components.
G rass T rimmer /B rush C uTTer 23 O pera tOr ' s M anual CarbureTor adjusTmenT Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break- in period your engine performance will increase and exhaust emissions will stabilize.
24 lubrICa TIon Level 1. Parts Requir ed: POWER BLENDX TM 8 oz. (P/N 91014) or Lithium Base Grease. Gear Housing 1. Clean all loose debris from gear box. 2. Remove plug (A) and check level of grease. 3. Add grease if necessary . DO NOT over -ll. Drive Shaft (SRM-266 Only) 1.
G rass T rimmer /B rush C uTTer 25 O pera tOr ' s M anual .080 (2.0 mm) dia. – 20’ (6 m) .095 (2.4 mm) dia. – 20’ (6 m) 1. Cut one piece of line to recommended length. nylon lIne replaCemenT 2. Align arrows on top of knob with openings in eyelets.
26 sharpenInG meT al blades Three styles of metal blades are approved for use on the ECHO Brush Cutter . The 8-tooth blade can be sharpened during normal mainte- nance.
G rass T rimmer /B rush C uTTer 27 O pera tOr ' s M anual T roubleshooTInG DANGER Fuel vapors are extremely ammable and may cause re and/or explosion. Never test for ignition spark by ground- ing spark plug near cylinder plug hole, otherwise serious personal injury may result.
28 Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: 1. Store unit in a dry , dust free place, out of the reach of children. DANGER Do not store in enclosure where fuel fumes may accumulate or reach an open ame or spark.
G rass T rimmer /B rush C uTTer 29 O pera tOr ' s M anual s peCIfICa TIons MODEL ---------------------------------------------------- SRM-266, SRM-266S Length w/o cutter head ------------------------------------ 1810 mm (71.3 in.) W idth -------------------------------------------------------- 250 mm (9.
30 ECHO LIMITED W ARRANTY ST A TEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited W arranty , provides to the original purchaser that this ECHO product is free from defects in material and workmanship .
G rass T rimmer /B rush C uTTer 31 O pera tOr ' s M anual PURCHASED REP AIR P ARTS, SHORT BLOCKS AND ACCESSORIES .
32 ECHO INCORPORA TED EMISSION CONTROL W ARRANTY ST A TEMENT FOR ECHO AND SHINDAIW A BRANDS The Environmental Protection Agency (EP A) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 and later equipment/small off-road engine (SORE).
G rass T rimmer /B rush C uTTer 33 O pera tOr ' s M anual noTes.
34 noTes.
G rass T rimmer /B rush C uTTer 35 O pera tOr ' s M anual noTes.
ECHO, INCORPORA TED 400 o akwood r oad l ake Z urICh , Il 60047 www .echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 MON - FRI C.S.T .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Echo SRM-266S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Echo SRM-266S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Echo SRM-266S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Echo SRM-266S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Echo SRM-266S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Echo SRM-266S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Echo SRM-266S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Echo SRM-266S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
