Manuale d’uso / di manutenzione del prodotto 2008 Viper del fabbricante Dodge
Vai alla pagina of 303
Viper OWNER’ S MANUAL 2008 2008 Viper 81-226-0804 Second Edition Printed in U.S.A..
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications / Alterations .
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 3 m Security Alarm System .................... 1 3 ▫ Rearming Of The System .
m Door Locks ............................ 2 3 ▫ Manual Door Lock ..................... 2 4 ▫ Power Door Locks ..................... 2 4 m W indows ............................. 2 6 ▫ Power W indows ....................... 2 6 ▫ Auto Down Feature .
m Break-In Recommendations ................. 5 6 m Safety T ips ............................ 5 7 ▫ Exhaust Gas .......................... 5 7 ▫ Safety Checks Y ou Should Make Inside The V ehicle .......................... 5 8 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle .
A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer or a locksmith.
NOTE: The Power Accessory Delay feature allows you to operate the radio and the power windows for 2 minutes after turning off the ignition switch. Removing the key from the ignition switch and opening the driver’s door will cancel this feature. Y our dealership can enable or disable the Power Accessory Delay feature as desired.
Keyless Entry (RKE) transmitter . After the last door is closed, or if all doors are closed, the system will arm itself in approximately 16 seconds. During the arming pr ocess, the V ehicle Security Alarm Indicator light will flash at a fast rate. Once the system is armed, the light will flash once every 6 seconds.
Press the T runk button on the RKE transmitter to allow access without triggering the alarm or having to disarm the system. The trunk lid will pop open. Entering the liftgate with the System Armed — Coupe: NOTE: Using the key to open the liftgate while the system armed will trigger the alarm.
• Press the UNLOCK button on the RKE transmitter . The front and r ear park lights and the turn signal lights will flash to acknowledge the signal. NOTE: The vehicle will not start unless the V ehicle Security Alarm System is disarmed by either method.
REMOTE KEYLESS ENTR Y This system allows you to lock or unlock the doors, open the trunk/liftgate, or activate the panic alarm fr om distances up to about 23 feet (7 meters) using a hand held radio transmitter . The transmitter need not be pointed at the vehicle to activate the system.
4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the transmitter while you are in the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound.
Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the transmitter . This feature can be turned on or turned off. T o change the current setting, proceed as follows: 1. Press the LOCK button on a programmed transmitter for at least 4 seconds, but no longer then 10 seconds.
ON/RUN position. If not deactivated through the trans- mitter or the ignition switch, the alarm will turn off automatically after 3 minutes. Programming Additional T ransmitters NOTE: Y ou must have at least one programmed trans- mitter to perform this procedur e.
Battery Replacement The recommended r eplacement battery is 2016. This is a generic battery , readily available at local retail stor es. NOTE: • Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/per chlorate. • Do not touch the battery terminals that are on the back housing or the printed circuit boar d.
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o assemble the transmitter case, snap the two halves together .
DOOR LOCKS W ARNING! Do not touch the exhaust pipe sill covers when entering or exiting your V iper . They can be hot enough to burn you. Observe the warning labels on each door closure panel.
Manual Door Lock The driver’s door can be locked or unlocked with the key . The door lock is located on the outside door panel beneath the mirror . Power Door Locks A power door lock switch is on each door trim panel. Use this switch to lock or unlock the doors.
Electronic Door Lock This vehicle is equipped with a virtual lock system. Input from the outside door handle is ignor ed if the vehicle is virtually locked. Door Lock Messaging The words “DOOR UNLOCKED” will flash in the odom- eter if one door is unlocked or will remain on steadily if both doors are unlocked.
WINDOWS Power Windows The power window switches are located between the driver and passenger seats on the center tunnel bezel, just to the left of the parking brake. The switch on the left side controls the driver’s window and the switch on the right controls the passenger’s window .
Auto Down Feature Both windows have an auto down feature. Pr ess the window switch to the second detent, release, and the window will go down automatically . Press the switch a second time in either direction to stop the window . T o open the window to a desired position, pr ess and hold the window switch in the first detent.
LIFTGA TE — COUPE MODELS ONL Y The liftgate can be unlocked or locked by the Remote Keyless Entry (RKE) transmitter or by activating either of the power door lock switches located on the door trim panels. T o unlock the liftgate with the RKE transmitter , press the LIFTGA TE button on the transmitter for at least one second.
W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes.
NOTE: Gas props support the tr unk lid in the open position. However , because the gas pressur e drops with temperature, it may be necessary to assist the pr ops when opening the trunk lid in cold weather .
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the seat belts and the airbags for the driver and passenger .
W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be injured seriously or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
3. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 4. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly .
5. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a little on the shoulder belt, as shown. 6. T o loosen the lap belt if it is too tight, lift up on the shoulder belt and pull on the lap belt.
8. T o release the belt, push the red button in the buckle. The belt will retract automatically to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
Enhanced Seat Belt Reminder System (BeltAlert T ) If the driver does not buckle their seat belt and vehicle speed exceeds 5 mph (8 km/h), or if the passenger does not buckle their seat belt within 10 seconds of vehicle speed exceeding 5 mph (8 km/h), the Enhanced W arning System (Belt Alert) will alert the occupant(s) to buckle their seat belt(s).
NOTE: W atch for the Seat Belt Reminder light to turn on while unbuckling the seat belt and turn off while r e- buckling the seat belt. It may be necessary to retract the seat belt. 6. T urn the ignition switch to the OFF/LOCK position. A single chime will sound to signify that you have com- pleted the programming successfully .
NOTE: Once the belt is in automatic locking mode, you will not be able to pull any more of the webbing out of the retractor . In this mode, you will only be able to retract excess webbing into the retractor to secur e the child restraint.
Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap portion of the belt across the thighs and as snug acr oss the hips as possible.
Driver and Passenger Supplemental Restraint System (SRS) - Airbag This vehicle is equipped with airbags for the driver and passenger as a supplement to the seat belt restraint systems. The driver airbag is mounted in the steering wheel. The passenger airbag is mounted underneath a cover in the passenger’s side of the instrument panel.
The airbags work with the instrument panel knee bolsters and the seat belts to provide impr oved protection for the driver and passenger . While the seat belts are designed to protect the driver and passenger in many types of collisions, the airbags will deploy in moderate to severe frontal collisions.
5. Never allow a child to place the shoulder belt behind them or under the arm. 6. Never allow a child to lean forward toward the instrument panel as a passenger airbag deployment could cause severe injury or death to a child in this position. 7. For a child from 1 to 12 years old: Move the passenger seat as far back as possible.
• Steering Wheel and Column • Instrument Panel • Seat T rack Position Sensors • Interconnecting W iring • Seat Belt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors •.
The ORC turns on the Airbag warning light and Passenger Airbag Disable (P AD) indica- tor light for 6 to 8 seconds as a self-check when the ignition is first turned on.
• The Knee Impact Bolsters help protect the knees of the driver and the passenger , and position everyone for the best interaction with the airbags. • The Occupant Classification Module (OCM) is lo- cated underneath the passenger seat. The OCM uses input from the Flex Mat to classify the occupant in the passenger seat into a size category .
who is seated properly in the passenger seat. The driver and passenger should always use the P AD indicator light as an indication that the passenger is positioned properly in their seat.
may not classify the occupant properly . Furthermore, objects lodged under the seat can prevent the occu- pant’s weight from being measur ed properly and may result in the occupant being classified impr operly . The passenger seat assembly contains critical compo- nents that affect passenger airbag deployment.
W ARNING! Unapproved modifications or service procedures to the passenger seat assembly , its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the passenger if the vehicle is involved in an accident.
for airbag inflation. These airborne particles may irri- tate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, move to fr esh air . If the irritation continues, see your doctor .
NOTE: Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/per chlorate. Airbag W arning Light Y ou will want to have the airbags ready for your protection in a collision.
There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner’s Manual to ensure you have the corr ect seat for your child.
who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year . These child seats are also held in the vehicle by the lap/shoulder belt. The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly .
Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it.
3. Remove the child tether access cover by prying either side with a screwdriver or similar tool, as shown. NOTE: While the child tether is in use, keep the access cover in a safe place so that it can be replaced after use of the child tether .
7. Return the seatback to an upright position. 8. Install the child restraint according to the manufactur - er’s directions. 9. Remove slack from the tether strap according to the child restraint manufactur er’s directions. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child.
4. T ighten the lap portion of the belt and allow the excess webbing to retract back to the r etractor . If it still does not make the child restraint secur e, then secure the child restraint with the Child Restraint T ether Anchor .
• A void excessive idling. • Check the engine oil level at every fuel fill. NOTE: A new engine will consume some oil during the first few thousand miles of operation. This should be considered as a normal part of the br eak-in and not interpreted as a sign of dif ficulty .
W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and side wall for cuts and cracks.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Convertible T op Operation — Convertible Models Only ........................... 6 3 ▫ T o Lower The T op ...................... 6 3 ▫ T o Raise The T op ...................... 6 4 ▫ Convertible T op Boot Cover Installation – If Equipped .
▫ Daytime Running Lights ................. 8 2 ▫ Lights-On Reminder .................... 8 2 ▫ Battery Saver Feature — Exterior Lights ...... 8 2 ▫ Fog Lights ........................... 8 2 ▫ T urn Signals .......................... 8 2 ▫ Highbeam/Lowbeam Select Switch .
CONVERTIBLE TOP OPERA TION — CONVERTIBLE MODELS ONL Y W ARNING! The convertible top does not provide the structural protection that a reinforced metal roof does, and the fabric top cannot be expected to prevent the ejection of the occupants of a vehicle in a collision.
3. Depress the button located at the top of the latch and then pull the latch handle downward and r earward. 4. Disengage the latch hook from the windshield receiver rod and then pull the latch all the way back to the detent stow position. 5. Pull the convertible top away from the windshield header .
4. Press downward on the convertible top and then pr ess the lever behind the driver seat to release the downstack latch. 5. Manually raise the convertible top until it meets the windshield header .
7. From inside the vehicle, grasp the handles and pull the convertible top toward the windshield header . Then, push the latch handle forward so that the latch hook engages the windshield receiver r od.
NOTE: Until the convertible top system has had ad- equate time to break-in, it may take a gr eater effort to engage the latch hook and close the latch. However , several weeks of normal convertible top usage will reduce these ef forts. 9. Raise both sun visors if so desired.
4. Slide the boot cover pocket over the front corner of the convertible top on the driver side of the vehicle. Then, stretch and slide the boot cover pocket over the fr ont corner of the convertible top on the passenger side of the vehicle. 5. T uck the boot cover underneath the leading edge of the convertible top.
6. On the passenger side of the vehicle, clip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 7. Push downward on the boot cover pocket to engage the inboard tab.
8. On the driver side of the vehicle, clip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 9. Push downward on the boot cover pocket to engage the inboard tab. 10. Push downward on the boot cover behind driver seat to lock down the boot cover .
1 1. Stretch and smooth out the boot cover fr om the rear of vehicle. 12. Close the trunk. 13. Ensure that the forward edge of the boot cover is tucked in fully .
Convertible T op Boot Cover Removal and Storage 1. Open the trunk. 2. On the driver side of the vehicle, pull upward on the boot cover to disengage the inboard tab. 3. Unclip the tab under the trunk lid stop and on the outer edge of the quarter panel flange.
4. On the passenger side of the vehicle, pull upward on the boot cover to disengage the inboard tab. 5. Unclip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 6. Slide the boot cover pockets off the front corners of the convertible top.
7. Fold the outer edges of the boot cover inward. 8. Fold the boot cover again. 9. Place the boot cover into the bag and store it in the trunk or a secur e dry area.
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A pivot system allows for horizontal and verti- cal mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle).
W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
NOTE: When not in use, return the power mirr or switch to the neutral (off) position to pr event accidental mirror movement. SEA TS Manual Seat Adjustments Forward & Rearward Adjustment The adjusting bar is at the front of the seat, near the floor .
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, reach into the lower right grille opening and pull the primary hood latch forward. Next, raise the front of the hood slightly and push the safety catch handle to the right.
NOTE: Assist props will raise the hood to a normal usage position. If greater access is r equired, the hood may be pushed up at the front, raising the hood beyond the initial opening height. CAUTION! Do not leave the hood open in areas where strong gusts of wind are likely .
LIGHTS Exterior & Interior Lighting Control The Multi-Function Lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, front fog lights, instrument panel lights, and interior lights.
This feature can be disabled at the dealership, if so desired. Daytime Running Lights The fog lights will come on as Daytime Running Lights, whenever the ignition switch is on, the headlights are of f, and the parking brake is off. The headlight switch must be used for normal night time driving.
Y ou can also signal a lane change by moving the lever partially upward or downwar d without moving beyond the detent. The turn signals will continue to operate until you release the lever . If either light has a very fast flash rate, check for a defective outside light bulb.
Flash to Pass Y ou can signal another vehicle with your headlights by lightly pulling the Multi-Function Lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased.
Courtesy lights are also found in the driver’s foot well, the passenger’s foot well, and in the liftgate on Coupe models. Y ou can turn this light on and off from the dimmer control in the Multi-Function Lever . This light is also controlled automatically by the illuminated entry system.
Instrument Panel Dimming W ith the parking lights or headlights on, rotate the dimmer contr ol upward to increase the brightness of the instr u- ment panel lights or rotate it down- ward to decr ease the brightness of the instrument panel lights.
WINDSHIELD WIPERS AND W ASHERS The W indshield W iper/W asher Control Lever is on the right side of the steering column. From the “OFF” position, push the W indshield W iper/ W asher Control Lever.
the W indshield W iper/W asher Control Lever upwar d to the first detent “DEL” position, and then rotate the end of the lever to select the desired delay interval. Ther e are seven delay settings, which allow you to regulate the wipe interval from a minimum of one cycle every second to a maximum of approximately 15 seconds between cycles.
Adding W asher Fluid The windshield washer fluid reservoir is located in the front of the engine compartment on the passenger side of the vehicle. Be sure to check the fluid level in the reservoir at r egular intervals.
W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving.
T o adjust the pedals: 1. Adjust the seat and steering column to a comfortable position. 2. Either press the adjustable pedal switch forward to move the pedals forward (towar d the front of the ve- hicle), or pull the switch rearwar d to move the pedals rearwar d (toward the r ear of the vehicle).
Adjustable Foot Rest This feature allows the driver to adjust the foot r est forward or backwar d and to rotate it upwar d or down- ward to allow for gr eater driving comfort. T o adjust the pedal: 1. Adjust the seat and steering column to a comfortable position.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel Featur es .................. 9 5 m Instrument Cluster Description .............. 9 6 ▫ Speedometer .......................... 9 6 ▫ Message Center ....................... 9 7 ▫ Gauges & Indicator Lights .
▫ Notes On Playing MP3 Files ............. 1 1 4 ▫ Operation Instructions - (CD Mode For MP3 Audio Play) ..................... 1 1 6 m Satellite Radio — If Equipped .............. 1 1 7 ▫ System Activation ..................... 1 1 8 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 7 — Speedometer/Odometer 13 — Climate Control 2 — Sound System Speaker 8 — Oil Pressur e Gauge 14 — Engine Start Button 3 — Main Message Center.
INSTRUMENT CLUSTER DESCRIPTION Speedometer Shows the vehicle’s speed in miles- per-hour (mph) and kilometers-per - hour (km/h). Odometer/T rip Odometer The odometer shows the total distance the vehicle has been driven.
• The word “DECK” will flash in the display if the trunk/liftgate is open. • The words “LOW TIRE” will flash slowly in the display and a chime will sound if the tire pr essure is low . • The words “FLA T TIRE” will flash rapidly in the display and a chime will sound if critically low tire pressur e is detected.
standard non-anti-lock brakes. If this occurs, safely bring the vehicle to a complete stop as soon as possible and cycle the ignition key to attempt to reset the ABS. If the light remains on, see your authorized dealer immediately to have the system serviced.
CAUTION! Prolonged driving with the light on could cause further damage to the emission control system. It could also affect fuel economy and driveability .
NOTE: The light will turn on when the ignition switch is in the ON/RUN position and the parking brake is applied. This light shows only that the parking brake is applied. It does not show the degree of brake application. W ARNING! Driving a vehicle with the brake light on is danger- ous.
Low T ire Pressure T elltale / TPMS Malfunction Indicator Each tire, including the spar e (if provided), should be checked monthly when cold and inflated to the inflation pressur e recommended by the vehicle manufacturer on the vehicle placard or tir e inflation pressur e label.
upon subsequent vehicle start-ups as long as the mal- function exists. When the malfunction indicator is illumi- nated, the system may not be able to detect or signal low tire pr essure as intended.
W ARNING! Do not exceed 55 mph (88 km/h) if the LOW T ire indicator is activated. V ehicle handling and braking may be reduced. Y ou could have an accident and be severely or fatally injured.
6000 RPM. This serves as a visual aid to shift before reaching the r ed line. This warning will turn off when the tachometer pointer falls below 5900 RPM. (See page 136 for more information.) Coolant T emperature Gauge This gauge shows the engine coolant tempera- ture.
between 20 and 80 psi (pounds per square inch). If the pointer remains in the r ed range, safely bring the vehicle to a complete stop and turn off the engine. DO NOT operate the vehicle until the cause is corrected. This gauge does not indicate the amount of oil in the engine.
Charge System Light The red Char ge System Light is located in the V oltage Gauge. It will turn on when there is a charging system malfunction or a possible accessory drive belt failure. CAUTION! The accessory belt also drives the water pump. Op- erating the vehicle with a failed belt can cause engine overheating and possible severe engine damage.
you understand and save you concern about these “ap- parent” malfunctions, you must understand a point or two about the transmission and reception of radio sig- nals.
SALES CODE RAH — AM & FM STEREO RADIO WITH CD PLA YER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/V olume Control Press the ON/VOL contr ol to turn the radio on.
Program T ype Radio Display Adult Hits Adult Hit Classical Classical Classic Rock Classic Rock College College Country Country Information Inform Jazz Jazz Foreign Language Language News News Nostalgi.
no station is found with the selected PTY pr ogram type, the radio will return to the last pr eset station. If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station.
T one Control The Bass and/or T reble contr ols sound for the desired tone. Press the AUDIO button, select Bass or TREBLE, then press SEEK + or SEEK 2 to incr ease or decrease amplification of the band. T o Set The Radio Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET button.
NOTE: Changes or modifications not expressively ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON befor e the CD player will operate.
Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection.
CD/DVD Changer Operation Press the MODE button to select between the CD player and the optional remote CD/DVD changer . T ime Press the TIME button to change the display fr om elapsed CD or DVD playing time to time of day .
CD audio tracks and computer files (including MP3 files). Discs created with an option such as 9 keep disc open after writing 9 are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times.
Playback of MP3 files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
R W/FF (CD Mode For MP3 Play) Press the FF side of the button to move forwar d through the MP3 selection. Press the R W side of the button to move back through the MP3 selection. AM/FM Button (CD Mode For MP3 Play) Switches back to Radio mode. RND Button (CD Mode For MP3 Play) Pressing this button plays files randomly .
System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of SIRIUS audio service that is included with the factory- installed satellite radio system in your vehicle.
The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed. ESN/SID Access W ith RBP , RBU, RAZ, RB1 and RBQ Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds.
Selecting a Channel Press and r elease the SEEK or TUNE buttons to search for the next channel. Press the top of the button to sear ch up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released.
one and stop the search. Pr essing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button ( SEEK ( When the desired pr ogram is obtained, press the 9 SEEK 9 button within five seconds. The channel will change to the next channel that matches the program type selected.
RADIO ANTENNA The radio antenna is located in the windshield. CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.
Air Conditioning and Heating System Blower Control Use this control to r egulate the amount of air forced thr ough the sys- tem in any mode you select. T urn the control clockwise to incr ease fan speed. T urn the control to th eO—O f f position to shut off the fan and to prevent any outside air fr om entering the vehicle.
Mode Control Use this control to select the dir ection of air flow . NOTE: The dot between the mode control icons is a mix position between the two modes. The mode settings are as follows: • Recirculation Contr ol Air is recir culated inside the vehicle.
• Defrost/Floor Air is directed thr ough the windshield defrost and the floor outlets. This setting works best in cold or snowy conditions that requir e extra heat at the windshield. This setting is good for maintaining comfort while reducing moistur e on the windshield.
Operating Tips NOTE: Refer to the chart at the end of this section for suggested control settings for various weather condi- tions. Summer Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifr eeze coolant to provide pr oper corrosion pr otection and to protect against engine overheating.
W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide suf ficient heating. If side win- dow fogging becomes a problem incr ease blower speed.
REAR WINDOW FEA TURES Electric Rear Window Defroster The electric Rear W indow Defroster Control is located on the climate control. Pr ess this button to turn on the rear window defr oster . A light above the button will illuminate when the rear window defr oster is ON.
ST ARTING AND OPERA TING CONTENTS m Starting Procedur es ..................... 1 3 2 ▫ Normal Starting ...................... 1 3 3 ▫ If Engine Fails T o Start ................. 1 3 5 ▫ After Starting ........................ 1 3 6 m T ransmission Shifting .
m T ire Safety Information ................... 1 4 9 ▫ T ire Markings ........................ 1 4 9 ▫ T ire Identification Number (TIN) .......... 1 5 2 ▫ T ire Loading And T ire Pressur e ........... 1 5 3 m T ires — General Information ....
▫ Fuel System Cautions .................. 1 7 0 ▫ Carbon Monoxide W arnings .............. 1 7 1 m Adding Fuel .......................... 1 7 1 ▫ Fuel Filler Cap (Gas Cap) ............... 1 7 1 m V ehicle Loading ........................ 1 7 3 m T railer T owing .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct any other occupant to buckle their seat belt. W ARNING! • Never leave children alone in a vehicle.
CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures, which can damage your vehicle. Do not leave your vehicle unattended with the engine running. Normal Starting NOTE: • Y ou must disarm the security system in order to start the engine.
5. T urn the key to the ON/RUN position. 6. Press the red ENGINE ST AR T button located on the instrument panel. Release the button when the engine starts.
If Engine Fails to Start CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. W ARNING! • Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle.
If the engine is flooded, it may start to run, but not have enough power to continue running when the start button is released. If this occurs, continue cranking up to 15 seconds with the accelerator pedal pushed all the way to the floor . Release the accelerator pedal and the start button once the engine is running smoothly .
Be sure the transmission is in FIRST gear when moving forward fr om a standing position. CAUTION! Failure to start out in FIRST gear when moving forward from a starting position may result in dam- age to the clutch. Y ou will find it easier to use only the lower gears for most city driving.
driving. The noise may also be more noticeable when the transmission is warm. This noise is normal and is not an indication of a problem with your clutch or transmission. Recommended Shift Speeds T o use your manual transmission for fuel economy it should be upshifted as listed below .
T o maintain a safe speed and prolong brake life, down- shift to maintain a safe speed when descending a steep grade. W ARNING! Skipping more than one gear while downshifting, could cause you to lose control of your vehicle. Y ou could have an accident.
T raction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and r oad surface. This is hydroplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precautions should be observed: 1.
Flowing/Rising W ater W ARNING! Do not drive on or cross a road or a path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly .
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
drops into the handle (r eleasing the lock), guide the handle downward to its stop and then r elease the button and the handle. The Brake System W arning Light in the instrument cluster will turn on when the ignition is in the ON/RUN position and the parking brake is applied.
BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function.
Safe Operating T ips W ARNING! T o use your brakes and accelerator more safely , follow these tips: • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping distances, or brake damage.
The Anti-Lock Brake System pump motor runs during the self-test at 12 mph (20 km/h) and during an ABS stop. The pump motor makes a low humming noise during operation, which is normal.
All vehicle wheels and tires must be the same size and type as the original equipment and the tires must be properly inflated to pr oduce accurate signals for the computer . W ARNING! Significant over or under inflation of tires, or mixing sizes of front or rear tires or wheels on the vehicle can lead to loss of braking effectiveness.
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds 9 ....blank.... 9 = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carr.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar .
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loadi.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs (295 kg) 5.
156 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion.
check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped).
T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important.
Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). Refer to the paragraph on “Freeing A Stuck V ehicle” in Section 6 of this manual. W ARNING! Fast spinning tires can be dangerous.
Many states have laws requiring tir e replacement at this point. Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended.
aggressive tr ead designs such as those on all season type tires. Rotation will incr ease tread life, help to maintain mud, snow , and wet traction levels, and contribute to a smooth, quiet ride. Follow the “Maintenance Schedules” in Section 8 of this manual for the recommended tir e rotation fr equency for your type of driving.
TIRE PRESSURE MONITOR SYSTEM (TPMS) Low Tire Indicator If tire pr essure falls below 20 psi (138 kpa), the Low T ire Pressur e T elltale in the Message Center will illuminate, a chime will sound, and the words LOW TIRE will flash slowly in the Liquid Crystal Display (LCD) panel in the bottom of the speedometer .
W ARNING! Do not exceed 55 mph (88 km/h) if the LOW T ire indicator is activated. V ehicle handling and braking may be reduced. Y ou could have an accident and be severely or fatally injured. TPMS Malfunction W arning Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly .
FUEL REQUIREMENTS 8.4L Engine The 8.4L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high-quality premium unleaded gasoline with an octane rating of 91 or higher . Light spark knock at low engine speeds is not harmful to your engine.
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in some ar eas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle.
Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives ar e not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
NOTE: • After removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor ce- ment. • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • The fuel tank filler tube has a restricting door about 2 inches (50 mm) inside the opening.
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle.
TRAILER TOWING T railer towing with this vehicle is not recommended. RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Recreational towing for this vehicle is not r ecommended.
WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 1 7 6 m If Y our Engine Overheats ................. 1 7 6 m TIREFIT Kit ........................... 1 7 7 ▫ TIREFIT Storage ...................... 1 7 8 ▫ TIREFIT Usage Precautions .
HAZARD W ARNING FLASHER The flasher switch is on the top of the steering column, just behind the steering wheel. Depress the flasher button and all front and r ear directional signals will flash. Depress the flasher button again to turn off the flashers.
• In city traffic — While moving, shift into the highest gear possible to reduce engine RPM. NOTE: There ar e steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the cooling system and turning off the A/C r emoves this heat.
TIREFIT Storage The TIREFIT kit is located in the trunk. TIREFIT Usage Precautions NOTE: • Replace the TIREFIT Sealant Bottle prior to the expi- ration date (printed on the bottle label) to assure optimum operation of the system.
• Y ou can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles for inflating sport balls, rafts, or like inflatable items. However , use only the Black Air Pump Hose (6) and make sure the Mode Select Knob (4) is in the Air Mode when inflating such items to avoid injecting sealant into them.
W ARNING! • T ake care not to allow the contents of TIREFIT to come in contact with hair , eyes, or clothing. TIRE- FIT is harmful if inhaled, swallowed, or absorbed through the skin: It causes skin, eye, and respira- tory irritation. Flush immediately with plenty of water if there is any contact with eyes or skin.
6. Air Pump Hose (Black) 7. Sealant Hose (Clear with Y ellow Cap) Using the Mode Select Knob & Hoses Selecting Air Mode T urn the Mode Select knob (4) to this position for air pump operation only . Use the Black Air Pump Hose (6) when selecting this mode.
(B) Setting Up to Use TIREFIT : T urn the Mode Select knob (4) to the Sealant/ Air Mode position. 1. Uncoil the Clear Sealant Hose (7) and then remove the Y ellow Cap from the fitting at the end of the hose. 2. Place the TIREFIT kit flat on the ground next to the deflated tire.
• T urn the Mode Select knob to the Sealant/Air Mode. • Connect the Power Plug (5) to a differ ent power outlet in your vehicle or another vehicle, if available. Make sure the engine is r unning before turning on the TIREFIT kit. • The Sealant Bottle (1) may be empty due to previous use.
W ARNING! TIREFIT is not a permanent flat tire repair . Have the tire inspected and repaired or replaced after using TIREFIT . Do not exceed 55 mph (90 km/h) until having the tire repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you.
5. Place the TIREFIT kit in its proper storage area in the vehicle. 6. Have the tire inspected and repair ed or replaced at the earliest opportunity at an authorized dealer or tire ser - vice center . 7. Replace the Sealant Bottle (1) at your nearest autho- rized Mopar t parts dealership as soon as possible.
JUMP-ST ARTING PROCEDURES W ARNING! • T ake care to avoid the radiator cooling fans whenever the hood is raised. They can start anytime the ignition switch is on. Y ou can be hurt by the fans. • T ake care to avoid the accessory drive whenever the hood is raised.
5. Remove the plastic cover from the remote jump-start positive post (+) in the engine compartment. Refer to the following illustration for remote jump-starting connec- tions. 6. If you are jump-starting your vehicle, connect one end of a jumper cable to the positive (+) terminal on the booster battery .
W ARNING! • Y ou should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze.
W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle.
CAUTION! T owing with equipment other than flat bed types may damage your vehicle. 190 WHA T TO DO IN EMERGENCIES.
MAINT AINING YOUR VEHICLE CONTENTS m 8.4L Engine Compartment ................ 1 9 4 m Onboard Diagnostic System (OBD II) ......... 1 9 5 m Emissions Inspection And Maintenance Programs ............................ 1 9 6 m Replacement Parts ...........
▫ Battery Save Feature ................... 2 1 0 ▫ Air Conditioner Maintenance ............. 2 1 2 ▫ Power Steering — Fluid Check ............ 2 1 3 ▫ Front & Rear Suspension Ball Joints ........ 2 1 4 ▫ Steering Linkage ..............
m Replacement Bulbs ...................... 2 4 0 m Bulb Replacement ...................... 2 4 2 ▫ Auxiliary High Beam Headlight, Front Park/T urn Signal Light, Front Side Marker Light ........................ 2 4 2 ▫ High Intensity Discharge Headlights (HID) .
8.4L ENGINE COMP ARTMENT 194 MAINT AINING YOUR VEHICLE.
ONBOARD DIAGNOSTIC SYSTEM (OBD II) T o meet new government regulations and pr omote cleaner air , your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions and engine control systems.
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system.
5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn of f the ignition key or start the engine. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
The best time to check the oil level is approximately 5 minutes after a fully warmed engine is turned off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground also will improve the accuracy of the oil level r eadings.
• More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C) • T railer towing • T axi, Police, or delivery service (commercial service) • Off-r oad or .
The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Com- partment” illustration in this section.
quality filters should be used to assure most ef ficient service. Mopar t Engine Oil Filters are a high quality oil filter and are r ecommended. Drive Belts — Check Condition and T ension Belt tension is controlled by means of an automatic tensioner .
Spark Plugs Spark plugs must fire pr operly to assure engine perfor - mance and emission control. New plugs should be in- stalled at the specified mileage. The entire set should be replaced if ther e is any malfunction due to a faulty spark plug. Malfunctioning spark plugs can damage the cata- lytic converter .
Fuel Filter The fuel filter is a part of the fuel module and it does not requir e maintenance. Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming in contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
NOTE: • Because of the plastic body shell on your vehicle, ignition cables should be replaced with the specially designed RFI cables available at your dealer . • The ignition timing cannot be set on this engine. Crankcase Emission Control System Proper operation of this system depends on fr eedom from plugging due to deposits.
Accessing The Battery Battery Location MAINT AINING YOUR VEHICLE 207 7.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
T o Service the Battery: 1. Remove the floor portion of the r ear compartment carpet to access the battery compartment. 2. Remove the battery cover mounting screws and re- move the battery cover . 3. Disconnect the negative battery cable from the battery .
Battery Save Feature The Battery Save feature conserves battery power when storing the vehicle. It allows for up to 3 months of storage time without losing radio and engine controller memory . Using this feature is an alternative to disconnecting the battery .
4. Remove the key from the ignition switch and exit the vehicle. The Battery Save Feature will be enabled 45 seconds after all doors are closed. NOTE: • T urning the ignition switch to the ON/RUN position at any time will cancel activation of the Battery Save Feature.
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product.
W ARNING! Overfilling the power steering fluid reservoir can result in spilling power steering fluid on hot engine parts and the power steering fluid catching fire. Front & Rear Suspension Ball Joints This vehicle has suspension ball joints that requir e peri- odic inspection and lubrication.
Lubrication The tie rod ends ar e lubricated for life. No periodic lubrication is requir ed. Body Lubrication Locks and all body pivot points, including seat tracks, doors hinges, trunk/liftgate hinges, and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against r ust and wear .
Multi-Purpose Lubricant NLGI Grade 2 or equivalent should be applied sparingly to all pivot and sliding contact areas. Other Body Mechanisms The following body mechanisms should be inspected and, if n.
• Rubber bushings • Starter bearing • Throttle contr ol cable • W ater pump bearings Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner .
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if .
Cooling System W ARNING! • When working near the radiator cooling fans, disconnect each fan motor lead or turn the ignition switch to the OFF position. The fans are tempera- ture controlled and can start any time the ignition switch is in the ON position.
drain from the coolant r ecovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown on the “Maintenance Schedules” in this manual.
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent r educing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle.
The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated.
service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
• Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions.
Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Recommended service intervals can be found in the “Maintenance Schedules” in this manual. W ARNING! Riding the brakes can lead to brake failure and possibly an accident.
• Inspect the brake hoses whenever the brake system is serviced and at every engine oil change. Inspect hy- draulic brake hoses for surface cracking, scuffing, or worn spots.
Use only the manufacturer’s r ecommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type. Use of a brake fluid that may have a lower initial boiling point or unidentified as to specifica- tion, may result in sudden brake failur e during hard prolonged braking.
T ransmission T ransmission Fluid Level Check Check the fluid in the transmission when performing other underhood services. Check the fluid level by removing the fill plug located on the left side of the transmission. The fluid level should be at the bottom of the fill hole.
Use only the manufacturer’s r ecommended clutch fluid. Refer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type. W ARNING! Overfilling the clutch fluid reservoir can result in spilling clutch fluid on hot engine parts and the clutch fluid catching fire.
Rear Axle Axle Lubricant Level Check Check the exterior of the axle for evidence of gear oil leakage every 12 months or 6,000 miles (10 000 km). This check should be made with the vehicle level and sup- ported by the suspension, with the vehicle on the ground or raised on an axle and wheel type hoist.
In the event that you do take this vehicle to a commercial car wash, move the Heater/Air Conditioning blower control to the lowest setting. This will pr event the possi- bility of water entering the system.
Convertible T op Care — Convertible Models Only Use a mild detergent to clean the top. A void heavy scrubbing and rinse with plenty of clean water . Allow to dry thoroughly befor e storage. Underbody Maintenance The corrosive materials used for ice and snow r emoval or dust control may accumulate on the underbody of your vehicle.
NOTE: Never scrape the windows with squeegees, razor blades, or other sharp instruments. • Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If using soap, wipe clean with a clean damp rag or chamois cloth.
FUSES (POWER DISTRIBUTION CENTERS) Fuses (Power Distribution Center) A power distribution center is located in the engine compartment on the driver’s side of the vehicle.
Cavity Car- tridge Fuse Mini Fuse Description 8 30 Amp Pink — Ignition Switch Run/ Accessory Feed 9 40 Amp Green — Headlights 10 30 Amp Pink — Ignition Switch Run Feed 1 1 — 20 Amp Y ellow Aut.
Cavity Car- tridge Fuse Mini Fuse Description 62, 63 — 15 Amp Blue Gauges 64, 65 — 10 Amp Red Airbag 66, 67 — 20 Amp Y ellow W iper Switch 68, 69 — 20 Amp Y ellow Left HID Headlight 70, 71 —.
Fuses (Mini-Power Distribution Center) A mini-power distribution center is located in the engine compartment on the passenger’s side of the vehicle. This center contains radiator fan control r elays and has two externally-mounted 40 Amp fuses for the radiator fans.
VEHICLE STORAGE W e recommend that you follow these guidelines for storing your vehicle for extended periods. • Fill the fuel tank. This will prevent water condensation inside the tank. If you plan to store your vehicle mor e than 2 months, add an anti-oxidant fuel stabilizer to the fuel tank.
Then, either disconnect the battery at the negative terminal or use the “Battery Save Feature” to conserve battery power . Refer to “Battery Save Feature” under “Maintenance Procedur es” in this section for details. NOTE: Disconnecting the battery causes the engine control system to lose memory of some “learned” func- tions.
NOTE: T o help prevent the battery fr om discharging during shorter periods of inactivity , perform the follow- ing: 1. Make sure that the trunk/liftgate, hood, doors, win- dows, and convertible top are completely closed. 2. Make sure that remote transmitter is operating and that the battery is good.
LIGHT BULBS — Exterior (Convertible Models) Bulb Number Low/High Beam High Intensity Discharge (HID) Headlight .... S e r viced at dealer only Auxiliary High Beam Headlight ...... (HB3A) 9005XS Front Park/T urn Signal Light ............. 3157AK Fog Light .
BULB REPLACEMENT Auxiliary High Beam Headlight, Front Park/T urn Signal Light, Front Side Marker Light 1. Remove the push pin from the upper outer corner of the splash shield and remove the splash shield. 2. T urn the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the headlight assembly .
3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly into the head- light assembly , and then turn it clockwise. 6. Install the splash shield and push pin. High Intensity Discharge Headlights (HID) The headlights are a type of high voltage dischar ge tube.
Front Fog Light 1. Remove the push pin from the upper outer corner of the splash shield and remove the splash shield. 2. T urn the bulb and socket assembly counter-clockwise, and then pull it out of the front fog light assembly . 3. Pull the bulb out of the socket assembly .
T aillight, T ail/Stop Light, Rear Marker Light 1. Open the trunk 2. Remove the two fasteners and then remove the access panel. 3. T urn the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the upper light assembly . 4. Pull the bulb out of the socket assembly .
5. Push the replacement bulb into the socket assembly . 6. Reinstall the bulb and socket assembly into the upper light assembly , and then turn it clockwise. 7. Install the access panel and the two fasteners. 8. Close the trunk. Backup Light, Rear T urn Signal Light 1.
3. Remove the three upper light assembly retaining nuts. 4. Remove the three bulb and socket assemblies from the upper light assembly by turning them counter-clockwise and then pulling them out of the upper light assembly .
5. Remove the upper light assembly . 6. T urn the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the lower light assembly .
7. Pull the bulb out of the socket assembly . 8. Push the replacement bulb into the socket assembly . 9. Reinstall the bulb and socket assembly into the lower light assembly , and then turn it clockwise. 10. Reinstall the three bulb and socket assemblies into the upper light assembly , and turn them clockwise.
License Light 1. Open the trunk. 2. T urn the bulb and socket assembly counter-clockwise, and then pull it out of the housing. 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly into the hous- ing, and then turn it clockwise.
HEADLIGHT AIMING The headlights on your new vehicle were aimed at the factory under a no load setting. A great increase in weight will change the aiming of the headlights. Therefor e, it may be necessary to readjust the headlights if you typically carry an excessive amount of weight in the rear compartment or generally suspect misalignment.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifr eeze/Coolant 5 Y ear/102,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent.
Chassis Component Fluid, Lubricant, or Genuine Part T ransmission Mopar t A TF+4 Automatic T ransmission Fluid. Rear Axle Mopar t Synthetic Gear and Axle Lubricant SAE 75W -140 or equivalent, with Limited Slip Additive Friction Modifier Brake Master Cylinder Mopar t Brake & Clutch Fluid DOT 4 Motor V ehicle or equivalent.
Body Component Fluid, Lubricant, or Genuine Part Hinges: Door , T runk & Hood Springs and Links Mopar t Spray White Lube or equivalent. Latches: Door , Hood & T runk Mopar t Multi-Purpose Lube NLGI Grade 2 or equivalent. Door Hinge Check Spring Lubriplate Mo-Lith No.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 2 5 6 m Maintenance Schedules ................... 2 5 6 ▫ Schedule “B” .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system.
• Off-r oad or desert operation. • If equipped for and operating with E-85 (ethanol) fuel. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in Schedule “B” in this section.
At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.
SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures ar e below 32° F (0° C). • Stop and go driving. • Extensive engine idling. • Driving in dusty conditions.
Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the air cleaner filter if necessary .
Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the air cleaner filter if necessary .
Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the engine air cleaner fil- ter if necessary .
Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (110 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXXX Rotate the tires. LL XXX Inspect and replace the air cleaner filter if necessary .
Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the air cleaner filter if necessary .
Miles 93,000 96,000 99,000 102,000 105,000 108,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) (180 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXXX Rotate the tires. LL XXX Inspect and replace the engine air cleaner fil- ter if necessary .
Miles 93,000 96,000 99,000 102,000 105,000 108,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) (180 000) Inspect the brake linings. X X Change the rear axle fluid. X X Change the brake and clutch fluid. X Change the brake fluid. X Lubricate the front and r ear suspension ball joints.
Miles 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXX Rotate the tires. LL XX Inspect and replace the engine air cleaner filter if neces- sary .
Miles 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (185 000) (190 000) (195 000) (200 000) Change the brake and clutch fluid. X Lubricate the front and r ear suspension ball joints.
SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter . X XXXX Rotate the tires. LL X XXXX Inspect and replace the engine air cleaner filter if necessary .
Miles 36,000 42,000 48,000 54,000 60,000 (Kilometers) (60 000) (70 000) (80 000) (90 000) (100 000) [Months] [36] [42] [48] [54] [60] Change engine oil and engine oil filter . XXXXX Rotate the tires. LL XXXXX Inspect and replace the engine air cleaner filter if necessary .
Miles 66,000 72,000 78,000 84,000 90,000 (Kilometers) (1 10 000) (120 000) (130 000) (140 000) (150 000) [Months] [66] [72] [78] [84] [90] Change engine oil and engine oil filter . X XXXX Rotate the tires. LL X XXXX Inspect and replace the engine air cleaner filter if necessary .
Miles 96,000 102,000 108,000 114,000 120,000 (Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000) [Months] [96] [102] [108] [114] [120] Change engine oil and engine oil filter . X XXX X Rotate the tires. LL X XXX X Inspect and replace the engine air cleaner filter if necessary .
Miles 96,000 102,000 108,000 114,000 120,000 (Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000) [Months] [96] [102] [108] [114] [120] Change the transmission fluid. X Inspect the brake linings. X Change the rear axle fluid. X Change the brake and clutch fluid.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .......................... 2 7 7 ▫ Prepar e For The Appointment ............ 2 7 7 ▫ Prepar e A List ........................ 2 7 7 ▫ Be Reasonable W ith Requests .
m Publication Order Forms .................. 2 8 2 m Department Of T ransportation Uniform T ir e Quality Grades ........................ 2 8 3 ▫ T readwear .......................... 2 8 3 ▫ T raction Grades ...................... 2 8 3 ▫ T emperature Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty; discuss additional charges with the service manager .
special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner . This is why you should always talk to your authorized dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C. If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying the manufacturer .
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover orders ar e ac- cepted. If you prefer mailing your payment, please call for an order form.
Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .
on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor - mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10.
About Y our Brakes ....................... 1 4 4 ABS (Anti-Lock Brake System) ............ 97,145 Accessory Delay , Power .................. 13,26 Adding Engine Coolant (Antifreeze) .......... 2 2 1 Adding Fuel ........................... 1 7 1 Adding W asher Fluid .
Emergency Starting ..................... 1 8 6 Jump Starting ......................... 1 8 6 Keyless T ransmitter Replacement (RKE) ....... 2 1 Location .......................... 186,206 Saving Feature (Pr otection) ............... 2 1 0 Storing V ehicle .
Carpeting ............................. 2 3 3 Catalytic Converter ...................... 2 0 4 CD (Compact Disc) Changer ................ 1 1 4 CD (Compact Disc) Player ............... 108,1 12 Chains, T ire ............................ 1 6 4 Charging System Light .
Selection of Coolant (Antifreeze) ...... 220,251,252 Crankcase Emission Control System .......... 2 0 6 Customer Assistance ..................... 2 7 7 Daytime Running Lights ................... 8 2 Dealer Service .......................... 1 9 8 Defroster , Rear W indow .
Compartment ......................... 1 9 4 Coolant (Antifreeze) ................. 219,252 Cooling .......................... 104,219 Exhaust Gas Caution ................ 29,57,171 Fails to Start .......................... 1 3 5 Flooded, Starting ....
Manual T ransmission ................. 228,253 Power Steering ..................... 213,253 Fluids ................................ 2 5 2 Fluids, Lubricants and Genuine Parts .......... 2 5 2 Fog Lights ......................... 81,82,97 Four-W ay Hazard Flasher .
Hazard Driving Through Flowing, Rising, or Shallow Standing W ater ................. 1 4 0 Hazard W arning Flasher ................. 99,176 Headlights .......................... 81,243 Aiming ............................. 2 5 1 High Beam .............
Key-In Reminder ......................... 1 3 Keyless Entry System ...................... 1 7 Keys ................................. 1 2 Knee Bolster .......................... 40,41 Lane Change and T urn Signals ............... 8 2 Lap/Shoulder Belts .
L o w T i r e ............................ 1 0 1 Malfunction Indicator (Check Engine) ........ 9 8 Map Reading .......................... 8 4 Oil Pressur e .......................... 1 0 5 Park ................................ 8 1 Passing ............
Methanol ............................. 1 6 9 Mirrors ................................ 7 5 Electric Remote ........................ 7 6 Outside ............................ 75,76 Rearview ............................. 7 5 Modifications/Alterations, V ehicle .
Parking On Hill ......................... 1 4 2 Passing Light ........................... 8 4 PCV V alve ............................ 2 0 6 Pedals, Adjustable ........................ 9 0 Pets .................................. 5 6 Pets, T ransporting .
Remote Keyless Entry (RKE) ................. 1 7 Remote T runk Release ..................... 2 9 Replacement Parts ....................... 1 9 7 Replacement T ires ....................... 1 6 2 Reporting Safety Defects ................... 2 8 1 Restraints, Child .
Service Contract ......................... 2 7 9 Service Engine Soon Light (Malfunction Indicator) .................... 9 8 Service Manuals ........................ 2 8 2 Setting the Clock ........................ 1 0 6 Shift Indicator Light .........
T ire Safety Information .................... 1 4 9 TIREFIT .............................. 1 7 7 T i r e s ............................ 59,157,283 Aging (Life of T ires) .................... 1 6 2 Air Pressur e .......................... 1 5 7 Alignment .
T ransmitter , Remote Keyless Entry (RKE) ...... 17,21 T ransporting Pets ........................ 5 6 T read W ear Indicators .................... 1 6 1 T rip Odometer .......................... 9 6 T runk Release, Emergency .................. 3 0 T runk Release Remote Control .
W indshield W iper Blades .................. 2 1 7 W indshield W ipers ....................... 8 7 W iper Blade Replacement .................. 2 1 7 W ipers, Intermittent .
Viper OWNER’ S MANUAL 2008 2008 Viper 81-226-0804 Second Edition Printed in U.S.A..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Dodge 2008 Viper è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Dodge 2008 Viper - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Dodge 2008 Viper imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Dodge 2008 Viper ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Dodge 2008 Viper, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Dodge 2008 Viper.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Dodge 2008 Viper. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Dodge 2008 Viper insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
