Manuale d’uso / di manutenzione del prodotto CU-7011 del fabbricante Denso
Vai alla pagina of 23
User's Manual.
Copyright © DENSO WAVE INCORPORATED, 2001 All rights reserved. No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher.
i Pr eface Please READ through these operating instructions carefully. It will enable you to operate your CU-7011 correctly. After you have finished reading the instructions, keep this manual handy for speedy reference.
ii How this book is organized This manual is made up of 10 chapters and appendix. Chapter 1 Ethernet System Configuration Chapter 2 Functions of the CU-7011 Chapter 3 Components and Functions Chapter .
iii ■ Related Publications BHT-7000 User's Manual BHT-7000 User's Manual "LAN Support Version" BHT-100 Series User's Manuals BHT-100 Series User's Manual "LAN Supp.
iv Alerts you to those conditions which could cause serious bodily injury or death if the instructions are not followed correctly. W ARNING CAUTION Alerts you to those conditions which could cause minor bodily injury or substantial property damage if the instruc- tions are not followed correctly.
v • Avoid dropping the battery cartridge or letting it undergo any shock or impact. Doing so could cause the batteries to break, generate heat, rupture or burn. • Only use the dedicated charger (CU-7011, CU-7001, C-700 or C-750) for charging the battery cartridge.
vi Handling the battery cartridge • Never charge a wet or damp battery cartridge. Doing so could cause the batteries to break, generate heat, rupture, or burn. Handling the CU • Never put the CU in places where there are excessively high temperatures, such as inside closed-up automobiles, or in places exposed to direct sunlight.
vii ■ Proper Care of the CU Before starting cleaning, unplug the AC adapter from the wall socket for safety. Clean the housing and the charge terminals of the CU and the battery cartridge termi- nals with a dry, soft cloth. • Never use benzene, alcohol, or other organic sol- vents.
Content Overviews Preface ................................................................................................................................. i How this book is organized ..................................................................
1 Chapter 1 Ethernet System Configu- ration Connecting CU-7011 units to an Ethernet enables you to use BHTs as a LAN client. For details about FTP and Socket API, refer to the BHT-BASIC Programmer's Manual. For procedures about setting the TCP/IP and FTP on the BHT, refer to the BHT User's Manual.
2 Chapter 3 Components and Functions Place the CU on a flat, horizontal plane. Do not install the CU on a wall or in a vertical position. LED indicators DATA (Communications LED, green) Lights when the BHT is communicating with the host computer. POWER (Power LED, green) Lights when the power is applied to the CU-7011.
3 Chapter 4 CU Status Indication by LED Indicators According to the ON/OFF states of the POWER and DATA LED indicators, you may check the machine status of the CU-7011 as listed below.
4 • If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter from the wall socket and contact your nearest dealer. Failure to do so could cause fire or electrical shock. • If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall socket and contact your nearest dealer.
5 Chapter 6 Connecting to Ethernet 6.1 Setting the T ransmission Speed of the CU-701 1 Set the transmission speed of the CU-7011 to the same value as that of the BHT, by using the DIP switch provided on the bottom of the CU-7011. (1) Unplug the AC adapter from the wall socket.
6 6.2 Interface Cable Connection Connect the modular plug* of the Ethernet cable to the Ethernet port of the CU-7011. (*10Base-T 8-pin modular, RJ45, ITA/ETA category 3 or higher) Lock lever Ethernet cable •W hen connecting the modular plug, insert it until it snaps into place.
7 6.3 Communication with the Host Computer This section describes how to start communication with the host computer according to the FTP in System Mode. (1) Turn on the host computer. (2) On the host computer, start the FTP server program. (3) Turn on the BHT and run System Mode.
8 Chapter 7 Charging the Rechargeable Battery Cartridge You may charge the battery cartridge loaded in the BHT. Service Life of Rechargeable Battery Cartridge: Lithium-ion batteries used in the battery cartridge will gradually deteriorate during the repeated cycles of charging and discharging due to its properties, even under normal use.
9 Operator's Action Place the BHT on the CU-7011. ⇓ After approx. 6 hours ⇓ Remove the BHT. CU-7011 Status On standby ⇓ Normal charging ⇓ Charging completed ⇓ On standby Indicator LED on the BHT OFF ON (in red) ON (in green) OFF ■ Charging Operation and BHT's Indicator LED The charging time is approx.
10 Chapter 8 Displaying the CU System Information on the BHT You may display the CU-7011 system information on the BHT's LCD. Set the BHT on the CU-7011 and operate the BHT to display the SYSTEM INFORMA- TION screen on the LCD. From that screen, you may call up the system program version and MAC address.
11 Chapter 10 MAC Addr ess The MAC address of the CU-7011 is printed on the nameplate. Nameplate MAC address (example).
12 Appendix Specifications [ 1 ] Pr oduct Specifications Power Source -Europe 230 VAC, 16 VA -U.S. 120 VAC, 13 VA -Australia 10 to 18 VDC, 450 mA (on 12 VDC) Power Consumption 8 VA Dimensions 112 x 142 x 84 mm (W) x (L) x (H) (4.41 x 5.59 x 3.31 inches) Weight Approx.
Communication Unit CU-701 1 User's Manual First Edition, October 2001 DENSO WAVE INCORPORATED The purpose of this manual is to provide accurate information in the handling and operating of the CU-7011.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Denso CU-7011 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Denso CU-7011 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Denso CU-7011 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Denso CU-7011 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Denso CU-7011, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Denso CU-7011.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Denso CU-7011. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Denso CU-7011 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
