Manuale d’uso / di manutenzione del prodotto DGE DGE-528T del fabbricante D-Link
Vai alla pagina of 34
1 D-Link DGE-528T Gigabit Ethernet PCI Adapter Manual Rev. 0 1 (Nov. 01 , 200 3 ) Printed in T aiwan.
2 T able of Content s Introduction ....................................................................................... 3 Content s of Package ......................................................................... 4 T echnology Basics ..........
3 Introduction The D-Link DGE-528T is ideal for the small o f fice or home o f fice environment. A f ter completing the steps in this manual, you will have the ability to share information and resourc.
4 Conten t s of Packa g e DGE-528T Gigabit E t he r n e t PCI A d a p t e r Package Content s 1 DGE- 528 T Gigabit Ethernet PCI Adapter 2 Manual on the CD-ROM 3 Quick Installation Guide T echnology Basics About Gigabit Ethernet Gigabit Ethernet is a network technology specified by IEEE S t andard 802.
5 Category 5 cabling is required for 1000 Base-T Gigabit Ethernet in order to provide full duplex operation . Full duplex 10 0 0Base-T operation allows simul t aneous transmission and reception, both .
6 The working relationship between a DGE-528T adapter and main memory working in Bus Master mode is powered by the Bridge/Memory Controller of the PCI bus. This reduces the CPU role in network operations, thus freeing the CPU to service other tasks, with resulting improvement in overall computing (multitasking) performance.
7 1. Power-ON the PC and press “Delete” or “F1” when prompted to enter the PCI/ISA BIOS CMOS Setup. Enable the WOL function or the power-ON function of the PC. The name of this function is system dependent, but may be located in a category heading titled something like Power Management .
8 Networking Basics Please follow all the instruc- tions in this window: In the following window , select the best description of your computer . Click Next Click Next If your computer connects to the Internet through a gate- way/router , select the second option as shown.
9 Networking Basics Click Next Click Next Enter a Computer description and a Computer name (optional.) Enter a Workgroup name. All computers on your network should have the same Workgroup name.
10 Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next Please wait while the Network Setup Wizard configures the computer .
11 Networking Basics Format the disk if you wish. Click Next In this window , select the best option. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Insert a disk into the Floppy Disk Drive, in this case drive “A.
12 Networking Basics Please wait while the Network Setup Wizard copies the files. Please read the information under Here’ s how in the screen below . After you complete the Net- work Setup Wizard you will use the Network Setup Disk to run the Network Setup W izard once on each of the computers on your network.
13 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will t ake effect when you rest art the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer .
14 Click St art (in the lower left corner of the screen) Right-click on My Computer Select Properties and click Select the Computer Name T ab in the System Properties window . Y ou may enter a Computer Description if you wish, this field is optional. T o rename the computer and join the domain, click Change.
15 Networking Basics Naming your Computer In this window , enter the computer name. Select W orkgroup and enter the name of the Workgroup. Checking the IP Address in Windows XP/2000 Click OK All computers on your network must have the same Workgroup name.
16 T ype ipconfig /all at the prompt. Hit Enter . All the configuration settings are displayed as shown below . Checking the IP Address in Windows XP/2000 ( Windows 98/ME users: go to St art > Run . T ype Command . T ype winipcfg at the prompt. Click Release and Renew to obt ain a new IP Address.
17 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology . If you are using a DHCP-capable Gateway/Router you will not need to assign S tatic IP Addresses.
18 For help with other tasks in home or small of fice networking, see Using the Shared Document s folder and Sharing files and folders in the Help and Support Center in Microsoft Windows XP . Other networking t asks Click OK Y ou have completed the assignment of a S tatic IP Address.
19 T roubleshooting A network can be simple to install and maintain. However , occasionally something might go wrong. The best approach to troubleshooting network problems is to start at the very simplest level and work your way up.
20 If you do not see any items branching out af ter double-clicking “Network adapters,” your Network Adapter has not been properly installed. S tart at the beginning of the guide and follow all the steps for this computer .
21 Go to St art> Run. T ype in the following: ping xxx.xxx.xxx.xxx , where xxx.xxx.xxx.xxx is the IP address to be pinged (i.e. 192.168.0.1). In this case, computer B with the IP address=192.168.0.1 is being pinged from computer A. Press Enter to begin pinging.
22 If the connection is good, you will receive four “Reply from” messages. T ype exit at the prompt to return to Windows..
T echnical Support Y ou can find software updates and user document ation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product. U.
T echnical S pecifications Network T ype: Gigabit Ethernet 100 0 Base-T IEEE 802.3 ab s t andard for 100 0 Mb p s baseband CSMA/CD local area network Fast Ethernet 10 0 Base-T X IEEE 802.
25 Host Interface: PCI 2.1 and PCI 2.2 Bus (Bus Master) I/O & IRQ base address: assigned by Plug and Play system Physical Dimensions: 14 cm x 5.9 cm Environmen t : S torage: -10 ° to 70°C, (14° to 158°F) Operating: 0 ° to 55°C, ( 32 ° to 131° F) Humidity: 10% to 90% RH, non-condensing Power Consumption: 4.
26 D-Link Offices AUSTRALIA D -LINK AUSTRALIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61 -2-9417-7100 FAX: 61-2-9417-1 077 TOLL FREE: 1800-1 77-100 (Austr alia), 0800-90 0900 (New Zeal and) URL : www .dli nk.c om.au E- MAI L: su ppo rt @d lin k.
27 LIMITED WARRANTY (excluding USA) D-Link provides this limited warranty for its product only to the person or entity who ori gina ll y p urch ased t he prod uct fr om D-L ink or its aut hori zed re sell er o r di stri butor .
28 D-Link of the de fectiv e Hardware. All Hardware (or part thereof) tha t is replaced by D- Li nk, or for w hi ch th e pur chase pr ic e is refu nd ed, sha ll becom e th e pr oper ty o f D- Lin k upon rep lac ement or r e fu nd.
29 RETURN THE REG ISTRAT ION CARD M AY AFF ECT T HE WAR RANTY FOR THIS PRODUCT. Submitting A Claim . Any claim under this limited warra nty must be submitted in wr iti ng befor e the end of th e Warr anty Peri od to an Auth ori zed D- Li nk Ser vice O ffice .
30 Op erat ion al adjust ments c overe d i n the oper ati ng man ua l for the pr oduct , and norma l maintenance; D a m a g e t h a t o c c u r s i n s h i p m e n t , d u e t o a c t o f G o d , f a .
31 REMEDY FOR A BREACH OF T HE FOREGOING LIMI TED WARRANTY IS REPAI R, REPLACEMENT OR REFUND OF TH E DEFECTIVE OR NON -CONFORMING PRODUCT. GOVERNING LAW : This Limite d Warranty shall be governed by the laws of the stat e of Cal ifor nia.
32 FCC Certi fications This equipment ha s been tested and found to comply w ith the limits f or a Class B digit al device, pursuant to Part 1 5 of the FCC Rules. These li m its are des igned to provide reasonable protection again st harmful interferen ce in a residential in stallation.
33 CE Ma r k W arn ing This is a Cl a ss B pr oduct. In a domestic en viron ment, this prod uct may cau se radio interferenc e, in which case the user may be required to take ad equate mea sures. VCCI Warning Trad emarks Copy right 1999 D-Li nk Corporation.
34 Registrat i o n Ca r d (excluding USA ) Print, ty pe or u se block letter s. Your n ame: Mr./ Ms _______ _______ ____________ _______ _______ _______ _______ _______ _______ _________ Organ ization: _________ ________ ____________ ___________ ________ Dept.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il D-Link DGE DGE-528T è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del D-Link DGE DGE-528T - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso D-Link DGE DGE-528T imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul D-Link DGE DGE-528T ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il D-Link DGE DGE-528T, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del D-Link DGE DGE-528T.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il D-Link DGE DGE-528T. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo D-Link DGE DGE-528T insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
