Manuale d’uso / di manutenzione del prodotto DIN-PWS50 del fabbricante Crestron
Vai alla pagina of 24
Crestron Green Light™ DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Operations & Installation Guide.
This document was prepared and written by th e Technical Documentation departm ent at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of t heir respective owners.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Contents Crestron Green Light™ DIN Rail 50 Watt Cresnet ® Power Suppl y: DIN-PWS50 1 Introduc tion .........................................................................................
.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Crestron Green Light™ DIN Rail 50 Watt Cresnet ® Power Supply: DIN-PWS50 Introduction The DIN-PWS50 is a 50 Watt Cresnet ® Power Supply module designed to snap onto a standard DIN rail for installation in a wall mount enclosure.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Applications The following diagram shows a DIN-PWS50 in a typical application. DIN-PWS50 in a Typical Application 2 • DIN Rail Power Supply: DIN-PWS50 Operations & Installation Guide – DOC.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Specifications Specifications for the DIN-PWS50 are listed in the following table. DIN-PWS50 Specifications SPECIFICATION DETAILS Output Power Per Output Port 50 Watts (2.08 Amps @ 24 Volts DC, Regulated), limited power source Module Total 50 Watts (2.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Physical Description This section provides information on the connections, controls and indicators available on your DIN-PWS50. DIN-PWS50 Physical View 4 • DIN Rail Power Supply: DIN-PWS50 Operations & Installation Guide – DOC.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply DIN-PWS50 Overall Dimensions 58 mm (2.29 in) 106 mm (4.18 in) 94.2 mm (3.71 in) 90 mm (3.55 in) 2 3 1 4 Operations & Installation Guide – DOC.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Connectors, Controls & Indicators # CONNECTORS * , CONTROLS & INDICATORS DESCRIPTION 1 100-240V~50/60Hz (2) Sets of (3) captive screw terminals, each set paralleled Line power input, neutral and ground with pass through Maximum wire size: 2.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Industry Compliance This unit has been manufactured to comply with UL’s Standards for Safety in Canada and the United States.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Setup Network Wiring When wiring the Cresnet ® network, consider the following: • Use Crestron Certified Wire. NOTE: Cresnet HP cannot be used. • Use Crestron power supplies for Crestron equipment.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply The DIN-PWS50 is designed for installation on a DIN rail. Refer to the following diagram when installing. Installing the DIN-PWS50 DIN-PWS50 DIN RAIL RELEASE DIN RAIL (NOT SUPP LIED) TOP 1. Place the top of the DIN-PWS50’s rail mount over the top of the DIN rail.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Hardware Hookup Connect the Device Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 8 before attaching the 4-position terminal block connector.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Hardware Connections for the DIN-PWS50 NET: TO CONTROL SYSTEM AND OTHER CRESNE T DEVICES 100-240~50/60H z: FROM AC POWER LINE FUSE IS LO CATED UNDER THIS COV ER POWER TO OTHER DEVICES Operations & Installation Guide – DOC.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Fuse Replacement If the DIN-PWS50 does not power up when it is plugged into an AC outlet, the fuse may need to be repl aced. The fuse holder is located on the front panel, under the cover in the lo wer left corner.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Check Network Wiring Use the Right Wire In order to ensure optimum perform ance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply NOTE: All Crestron certified Cresnet wiring must consist of two twisted pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pa ir is the Y conductor and the Z conductor.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise may be returned for credit, exchange or service without prior authorization from CRESTR ON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Operations & Installation Guide – DOC. 6667A DIN Rail Power Supply: DIN-PWS50 • 17 This page is intention ally left blank.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 This page is intention ally left blank. 18 • DIN Rail Power Supply: DIN-PWS50 Operations & Installation Guide – DOC.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply This page is intention ally left blank. Operations & Installation Guide – DOC. 6667A DIN Rail Power Supply: DIN-PWS50 • 19.
Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6667A 15 Volvo Drive Rockleigh, NJ 07647 (2020749) Tel: 888.CRESTRON 05.08 Fax: 201.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Crestron DIN-PWS50 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Crestron DIN-PWS50 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Crestron DIN-PWS50 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Crestron DIN-PWS50 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Crestron DIN-PWS50, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Crestron DIN-PWS50.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Crestron DIN-PWS50. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Crestron DIN-PWS50 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
