Manuale d’uso / di manutenzione del prodotto 315.10136 del fabbricante Craftsman
Vai alla pagina of 15
Operator's Manual 1/2 in. HAMMER DRILL Double Insulated Model No. 315.101360 Save this manual for future reference ,A CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
• Table of Contents ..................................................................................................................................................... 2 • General Safety Rules ....................................................
Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
KNOW YOUR HAMMER DRILL See Figure I. Before attempting to use your hammer drill, familiarize yourself with all operating features and safety requirements. See Figure 1. _i CAUTION: Carefully read through this entire operator's manual before using your new drill.
SWITCH See Figure 2. To turn your hammer drill ON, depress the switch trigger. Release switch trigger to turn your hammer drill OFF. LOCK-ON BUTTON See Figure 2. Your hammer drill is equipped with a "lock-on" feature, which is convenient when continuous drilling for extended periods of time is required.
• Form a loop by forcing end with round holes through slotted hole opposite end. • Place the loop over the cord and pull it tight. • Mount the chuck key by inserting the geared end through the hole in the holder. Large keys in the larger hole, smaller keys in the small hole.
To Adjust: • To adjust, loosen the auxiliary handle assembly by turning the handle counterclockwise. • Rotate auxiliary handle assembly to desired operating position. • Securely tighten by turning the auxiliary handle clockwise. USING DEPTH GAGE ROD See Figure 7.
TO INSTALL BITS See Figure 9. • Unplug your hammer drill. ,_ WARNING: Failure to unplug hammer drill your could result in accidental starting causing serious injury. • Open or close the chuck jaws to a point where the opening is slightly larger than the drill bit you intend to use.
DRILLING See Figure 11. • Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply. • Check the direction of rotation lever for correct setting (forward or reverse).
CHUCK REMOVAL See Figure 12. The chuck must be removed in order to use some accessories. To remove: • Unplug your drill. _k WARNING: Failure to unplug your drill could result in accidental starting causing serious injury. • Insert a 8 mm (5/16 in.
GENERAL Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts represent an important part of the double insulation system and should be serviced only at a Sears Service Center. Avoid using solvents when cleaning plastic parts.
The following recommended accessories are currently available at Sears retail stores. • High Speed Bits (For wood or metal) • Masonry Bits • Wood Boring Bits • Hole Saws • 1/2 in. Chuck (9-2980) 1/2 in. Max. 3/4 in. Max. 1-1/2 in. Max. 2-1/2 in.
Page 15.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Craftsman 315.10136 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Craftsman 315.10136 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Craftsman 315.10136 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Craftsman 315.10136 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Craftsman 315.10136, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Craftsman 315.10136.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Craftsman 315.10136. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Craftsman 315.10136 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
