Manuale d’uso / di manutenzione del prodotto AV200 del fabbricante Corinex Global
Vai alla pagina of 44
Manual A V200 P owerline Ethernet Adapter.
Corinex A V200 P owerline Ethernet Adapter EN 61000-3-2 EN 61000-3-3 V ancouver / June.08.2005 Corinex Communications Corp. # 670-789 W est Pender Street V ancouver , BC Canada V6C 1H2.
1 Copyright Corinex AV200 P owerline Ethernet Adapter This document, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of the license.
Corinex AV200 P owerline Ethernet Adapter 2 End User License Agreement CORINEX COMMUNICA TIONS CORPORA TION This End User License Agreement (“EULA ”) is a legal agreement between you and CORINEX COMMUNICA TIONS CORPORA TION (“CORINEX”) with regard to the copyrighted Software provided with this EULA.
Corinex AV200 P owerline Ethernet Adapter 3 End User License Agreement 7. Export Laws. This EULA involves products and/or technical data that may be controlled under any applicable export control laws, and regulation, and may be subject to any approval required under such laws and regulations.
Contents Copyright .......................................................................................... 1 End User License Agreement .............................................................. 2 1. Introduction ...............................
5 Introduction Corinex AV200 P owerline Ethernet Adapter 1 Introduction 1.1 Overview The Corinex A V200 Powerline Ethernet Adapter is a network adapter , connecting your computers and devices to each other , and to your Internet connection, over the electrical circuits already in your home or office.
6 Installation Corinex AV200 P owerline Ethernet Adapter 2 Installation 2.1 P ackage Contents When you receive your Corinex A V200 Powerline Ethernet Adapter , check to be sure that your package conta.
1. POWER Green On: P ower on Off: P ower off 2. PLC Green The behavior of this LED is explained in chapter 3.4.7 3. ETHERNET Green On: Link on LAN Off: No link on LAN Blinking: receiving/transmitting data Connector Definitions (Connectors from left to right) 7 Installation Corinex AV200 P owerline Ethernet Adapter 1.
8 Installation Corinex AV200 P owerline Ethernet Adapter 2.5 Connecting the AV200 Powerline Adapter T o connect the Corinex AV200 P owerline Ethernet Adapter to your computer , follow the steps listed below . 1. Connect the supplied Ethernet cable to the Ethernet (LAN) port on the wall mount, and to an Ethernet port on your computer .
9 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3 Adapter Configuration In order to access the web-based configuration pages, it is necessary to know the adapter ’s IP address and for your computer to be connected to the adapter (as described in section 2.
10 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter Note: If password protection is disabled, you will be taken straight to the Main page, rather than the Authentication page.
Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3.3 Additional Information P age This page shows more detailed information about the adapter . System Information Uptime Shows how long the adapter has been running since the last startup.
Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 12 PHY Status Notches Indicates whether or not frequency notches are enabled. notches should always be enabled, in order to eliminate interference with Radio Amateur bands specified by the local authorities.
Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 13 Default Priority Shows the default priority for traffic transmission. Criterion 1 & 2 Shows which criteria are used to classify traffic. This can be TOS, 802.1p or Custom . If Custom, the complete parameters are displayed below .
14 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3.4 Change Configuration P age 3.4.1 Overview The configuration pages allow you to change the settings on the adapter . Any parameters changed here will be stored in the adapter‘s permanent memory , and at the next startup, will be activated automatically .
15 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3.4.2 Basic Settings Most of the time, the only thing that needs to be changed is the Network Identifier and the Encryption, in order to avoid interfering with other networks and protect your information.
Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 16 If you want to enable 3DES encryption in your network, please select one of the input methods and enter the password. Input methods: ASCII If ASCII is selected, the Encryption Key string can have up to 24 non-extended ASCII characters.
Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 17 If you want to configure the adapter to function as an automatic EP/AP , please select “EP” from the list. If you want the adapter to behave as a Master , select “Fixed AP” from the list.
Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 18 The following picture shows an example of two A V200 networks with different Network Identifiers: Communication between adapters (called modems in this picture) is encrypted with a T riple-DES algorithm.
19 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3.4.3.2 Network Configuration Y our Corinex A V200 P owerline A dapter can be configured to use either DHCP (automatic IP address assignment), or a fixed IP . The following parameters are used by the fixed IP configuration.
20 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter Note: It is strongly advised to turn on the notching function. P ower Control is an automatic transmission power control which prevents different networks from overpowering each other .
21 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3.4.6 VLAN Configuration When A V200 P owerline adapters are used for ADSL extension, it is important for the operator to be able to distinguish the type of traffic that each adapter is generating.
22 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter LED is blinking The average connection to the Slaves is slower than the defined upper limit, but faster than the lower limit. The average connection to the Master is slower than the defined upper limit, but faster than the lower limit.
23 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter There is one offset, and one bitmask and pattern for the trigger condition. The trig- ger condition is used to make sure that the Ethernet frame contains, for example, an IP frame. T o check this condition, the offset must be set to 16 and the bitmask to 0xFFFF .
24 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter Factory reset will restore the adapter‘s default settings. The system will ask for the password, which is “ betera “. Then click OK . The adapter will restart with the following configuration: - IP address = 10.
25 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 3.4.11 Firmware upgrade using a TFTP Server T o upgrade the firmware of the adapter using TFTP , a TFTP server must be running on a computer . W e recommend a freeware tool called TFTPD32 .
26 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter 6. Click “OK” to start the process. The progress is shown every 30 seconds. 7. The adapter will first download the file and then calculate the CRC. 8. If the CRC is correct, the Hardware Rese t button will be highlighted.
27 Adapter Configuration Corinex AV200 P owerline Ethernet Adapter First of all, the Criterion field must be set to Custom , in order to create custom rules for traffic classification. T o prioritize UDP traffic, first the Ethernet packets containing IP packets must be detected.
28 Video Network Setups Corinex AV200 P owerline Ethernet Adapter 4 Video Network Setups 4.1 Introduction An In-Home A V network is made up of an access point (AP) adapter and several end points (EPs).
29 Video Network Setups Corinex AV200 P owerline Ethernet Adapter • Public Network - This is the default configuration of an In-Home network. If you do not want to change the settings on your network, the network configuration protocol will configure all the adapters automatically .
30 Video Network Setups Corinex AV200 P owerline Ethernet Adapter Note: Any of these two basic scenarios can be enlarged, adding more adapters, computers and set-top-boxes.
31 Video Network Setups Corinex AV200 P owerline Ethernet Adapter In multi-network scenarios, such as the one depicted in the picture above, there is a new entity , called the QoS controller . The QoS controller ’s role is to assign channel access to the different networks.
32 Network Configuration Corinex AV200 P owerline Ethernet Adapter 2. Select the Local Area Connection icon for the applicable adapter (Ethernet adapter or P owerline - usually the first adapter listed). Double-click the Local Area Connection . 3. The Local Area Connection Status screen will appear .
33 Network Configuration Corinex AV200 P owerline Ethernet Adapter 4. Select Internet Protocol (TCP/IP) and click the P roperties button. 5. Select Use the following IP address . Set the IP address manually in the format 10.10.1.X (for example 10.10.1.
34 Network Configuration Corinex AV200 P owerline Ethernet Adapter 6. Click OK in the T CP/IP Properties window to complete the PC configuration, and click Close or the OK button to close the Network window . 5.1.2 Setting up a static IP in Windows 2000 1.
35 Network Configuration Corinex AV200 P owerline Ethernet Adapter 3. Click the Properties button to get to the Local Area Connection Properties. 4. Select Internet Protocol (TCP/IP) and click the P roperties button. 5. Select Use the following IP address .
36 Network Configuration Corinex AV200 P owerline Ethernet Adapter 6. Click the OK button in the T CP/IP Properties window to complete the PC configuration, and click Close or OK to close the Network window . 5.1.3 Setting Up a Static IP in Windows 98 1.
37 Network Configuration Corinex AV200 P owerline Ethernet Adapter 5.1.5 Setting up a static IP in Mac OS 1. Open the Network Control Panel in System P references .
38 Network Configuration Corinex AV200 P owerline Ethernet Adapter 3. Set the IP address manually in the format 10.10.1.X (e.g. 10.10.1.200) and Subnet Mask 255.255.0.0. 4. Click on Apply Now and close the Network panel, saving your settings. tcpwin.reg for use with Windows operating systems 5.
39 Network Configuration Corinex AV200 P owerline Ethernet Adapter With a Linux PC running kernel 2.4 or higher , open the console and execute the command ./tcpwin.sh 512 logged in as root . 5.4 Using Powerline Filters A PLC (P owerline) filter is a low -pass filter that will only allow the 50/60 Hz main voltage through.
40 Network Configuration Corinex AV200 P owerline Ethernet Adapter When to use this filter: • When you want to isolate a P owerline test network from the rest of the electrical grid, either because .
41 T roubleshooting Guide Corinex AV200 P owerline Ethernet Adapter 6 Troubleshooting Guide The Corinex AV200 P owerline Ethernet Adapter has been designed to be a reliable and easy-to-use network connection device. Please refer to the list below to aid in troubleshooting or visit www .
42 T roubleshooting Guide Corinex AV200 P owerline Ethernet Adapter ping IP ADDRESS -t , where IP ADDRESS is the IP address of the computer to which the adapter is connected, e.g. ping 192.168.4.1 -t (this process can be interrupted by pressing CTRL+C ).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Corinex Global AV200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Corinex Global AV200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Corinex Global AV200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Corinex Global AV200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Corinex Global AV200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Corinex Global AV200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Corinex Global AV200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Corinex Global AV200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
