Manuale d’uso / di manutenzione del prodotto CDR0860 del fabbricante Clover Electronics
Vai alla pagina of 112
H.264 16/8/4CH Pent aplex Digit al V ideo Recorder V2.6 MODEL: CDR1660 / CDR0860 / CDR0460 Copyright © 2009 Clover El ectron ics U.S.A. All Rights Reserved.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 2.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 3 Table of Contents ABOUT THIS MANUAL ............................................................................................ 7 1. UNPACKING ....
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 4 7.7.1.4. SLOW .......................................................................................................................... .......... 38 7.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 5 8.3.2.2.1. INTERNET TIME ADJUST ................................................................................................. 70 8.3.2.2.2. SELECT TIME ZONE .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 6.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 7 ABOUT THIS MANUAL This is the Instruction Manual for H.26 4 S tand-Alone Digital V ideo Recorder , Model CDR1660, CDR0860 and CDR0460. The middle digit(s) of the model numbers (e.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 8 1. UNP ACKING Care should be t aken when unpacking to avoid damaging the system. Please ensure that the following items are included. Note: Cont act your dealer immediately if any component s are missing.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 9 1.1. H.264 ST AND-ALONE DIGIT AL VIDEO RECORDER CDR1660/CDR0860/CDR0460 is the mo st reli able and functional embedded DVR system available today .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 10 2. FEA TURES H.264 Compression Algorithm The most advanced compression available today . Multi Functional Record Powerful, multiple record modes available: Normal (Continuo us, Manual), Alarm, Motion Detection and Schedule Recordin g.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 11 3. WHA T T O DO A T THE TIME OF INST ALLA TION The system should be inst alled in the following order; 1. Make su re all the required hardware is available.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 12 4. SPECIFICA TIONS Video Video Input 16/8/4 CH (BNC) Input Level 1.0Vp-p±10% Composite, 75 Ω Balanced Video Standard AUTO Main Monitor Output 1.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 13 Searching and Playback Searching Method Time/Date, Calendar, Event Playback(Reverse) 1, 2, 4, 8,16, 32, 64, 128 velocity 1/2, 1/4,1/8,1/16, 1/32, 1/64, 1/128 Copy Device Internal CD/DVD RW Not supported Media Support USB(2.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 14 Environmental Operating Temp 0 ℃ ~ + 40 ℃ Storage Temperature -10 ℃ ~ + 60 ℃ Humidity 30.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 15 5. OVER VIEW AND CONTROLS There are 3 ways to operate the system by pressing the buttons on the front p anel or buttons on the remote controller and cl icking the mouse.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 16 10. CH SELECT/ ENTER Key a) Press this key to select the desired cha nnel in full screen. This key is used to toggle between single cha nnels. b) Press this key to execute the selected func tion in the menu scre en or enter the selected submenu.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 17 5.2. REAR P ANEL.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 18 ① CAMERA INPUT BNC connectors for co mposite video signal input ② SPOT OUTPUT Spot monitor B.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 19 5.3. IR REMOTE CONTROLLER NOTE: NO 4. ENTER (HOME): Protocol supported function of PTZ Home Position move. SPD / DSC-230 / CS-854 / EZ / PCS-SERIES Button Name Descri p tion 1.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 20 5.4. MOUSE CONTROL AND OPERATIONS Insert the USB Mouse to the USB port which is on the front panel of the DVR a s shown in the below figure. NOTE: We recommend you to connect the USB mou se into Port 2 and use Port 1 for USB memor y stick.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 21 a) RECORD Button Click the left button of the mouse on REC ico n of the Menu bar to start to record. T o stop recor ding, click the left but ton of the mouse on REC icon once again.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 22 Click the (EXIT) button to return to the LIVE mode.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 23 Click the (EXIT) button of the PTZ control ba r to return to the LIVE mode. For detail information of PTZ control, refer to chapter 7.5.9. P AN / TIL T on page 33.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 24 6. INST ALLA TION AND CONNECTIONS 6.1. NOTE FOR INSTALLATION Install the system accordin g to the instructions described in this manual. Avoid any are a with high humidity or dust which can shorten lifetime of the system.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 25 6.3.2. CONNECT ION OF MONITOR Connect the composite V ideo Output (VIDEO OUT) of the DVR to the V ideo IN of Monitor as shown in the below diagram.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 26 6.5. ALARM (RELAY) CONNECTION If you want, you can install alarm on your DVR syst em. There is one ala rm power switch, which is controlled by the DVR.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 27 6.7. CONNECTION TO AN ETHERNET NETWORK Our Ethernet connecto r is a RJ45 type. The ma ximum cable length is 300 ft. When you want to use a longer cable, we suggest u sing repeater .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 28 7. HOW T O OPERA TE 7.1. GENERAL INFORMATION Y ou can operate all functions of the system by use of buttons located on the fro nt panel, remote controller and a mouse.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 29 The hard drive overwrite is on as default so t he counter will remain as 0 and the DVR will continue to write on to the hard drive from the beginning.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 30 AUTO SEQ notification is displayed on the upper lef t hand corner of the screen while the system is in the AUT O SEQUENCE mode. 7.5.4. LIVE AUDIO This unit can support 1 channel au dio (line audio only).
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 31 ① Use the directional buttons to move the zoom window to the desired locati on. ② T oggle x2, x4 and normal screens by clicking the button. ③ Click the button or press the ESC button of the remote controlle r to exit out of the zoom mode.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 32 ① Clicking the numeric buttons on the PIP control bar or pressing the numeric button s of the remote controller will ch ange the PIP window to change the channel to the desired channel.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 33 The spot monitor will display the channel accordingly . Press the SPOT button of the remote controller to exit from S pot monitor mode. 7.5.8. OSD ON / OFF OSD ON/OFF is possible in the live mode or record mode.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 34 Click the PTZ button on the MENU bar or press th e PTZ button of the remote controller in the live mode t o access the P AN/TIL T cameras. ① ZOOM: Zoom in and out by clicking on the - or + buttons.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 35 7.6.2. MOTION RECORDING Motion recording is yet another ef fective form of event recording that is triggered when a channel detects motio n in its field of view as the H.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 36 Select the ALARM RECORDI NG ON or OFF and set the other items to the desired values. The channels on which the alarm is triggered will display the “ALARM” message and you can h ear the beep sound by 5 seconds interval for 30 seconds.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 37 Click the button on the playback control bar or press the DIR (Direction) button of the remote controller or the front p anel to change the playback direction.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 38 Clicking the button on the playback cont rol bar or pressing the DIR button will change the direction of fast forward to rewind while maint aining the same speed.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 39 Clicking the button on the playback control bar or pressing the DIR button of the remote controller or the front panel will cha nge the direction of slow playback to the oppo site direction while maintai ning the same speed.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 40 When the end of the loop is rea ched, the playback returns to POSITION A and the loop playback is repeated. Press the PIP button of the remote controller to exit from the loop playback mode.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 41 7.7.1.7. AUDIO PLAYBACK The audio is always reco rded in real time regardless of the recording speed. Press the AUDIO SEL button to turn the AUDIO ON or OFF while pressing F UNCTION button.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 42 T o change the month, click the MONTH button and then click the desired month or highlight the M.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 43 7.7.2.2. TIME / DATE SEARCH T ime search provides an overview of the reco rd ed data from the earliest available reco rding to the latest available recording.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 44 If any of the channels need to be viewed in full screen mode, select the desired chann el by clicking the left button of the mouse.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 45 T o start the playback, double-cli ck the desired event or highlight the desired event usin g the ▲ , ▼ , ◀ , ▶ buttons and then pres s the ENTER button of the remote controller or the front panel.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 46 And the COPY menu will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 47 Click YES to begin formatti ng and double-click NO to cancel. Or move the cursor using the ▲ , ▼ buttons of the remote controller or the front panel and then press the ENTER button to select YES or NO.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 48 CDR0460 (4channel) a. Select the MEDIA type (USB 1 or USB 2: DVR USB port number to be connected.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 49 7.8.2. CD-R The process is same as above, chapter 7.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 50 And you can see the playback image of the selected file like the lef t picture. RECOMMENDED USB BRANDS The USB 2.0 flash memory comes in various sizes, up to 8 Gigabytes of storage per flash memory .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 51 As the compatibility is continuously being tested, pl ease check with the seller before using non-listed manufacturers’ models.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 52 Double-click YES to stop the backup process. Or in case of using the remote controller or the front panel buttons, highlight YES using the ▲ , ▼ , ◀ , ▶ buttons and then press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 53 Double-click YES to continue copying. Or in case of using the remote controller o r the front panel buttons, highlight YES using the ▲ , ▼ , ◀ , ▶ buttons and then press the ENTER button.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 54 8.1.1. AUTO SEQUENCE CDR0460 (4channel) At the SCREEN menu, Double-click AUTO SEQUENC E or highlight AUTO SEQUENCE and then press the ENTE R button and the AUTO SEQUENCE menu will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 55 8.1.2.2. HDD FREE SPACE MODE Select the display mode for the remaining free sp ace on the hard di sk drive. The default is in percentage. Click the left button of the mouse on the value.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 56 Click the left button of the mouse on the value.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 57 b) COVERT (CAMERA ON/ OFF) Each camera can be conv ert by setting ON or OFF in the CAMERA menu. The covert function is available in the live mode. Click the COVERT ON/OFF button of the desired channel and select O N or OFF.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 58 Click the PTZ button of the channel where the P TZ camera is connected and select the appropri ate protocol type.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 59 8.1.4. SPOT At the SCREEN menu, Double-click SPOT or high light SPOT and then press the ENTER button and the SPOT menu will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 60 8.1.5. VIDEO ENHANCEMENT At the SCREEN menu, Double-click VIDEO ENHA NCEMENT or highlight VIDEO ENHANCEMENT and then press the ENTER button and the VIDEO ENHANCEMENT menu will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 61 8.1.5.3. CONTRAST At the VIDEO ENHANCEMENT menu, Double-click CONTRAST or hi ghlight CONTRAST and then press the ENTE R button and the CONTRAST menu will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 62 8.1.6. EVENT SCREEN MODE Define how the main video output react s when an event occurs. Click the left button of the mouse on the value and select the desired value.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 63 8.2.1. RECORDING SETUP Each channel can be individually scheduled and a dju sted. Scheduling allows t he DVR to record at specific times even when the REC button is not on.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 64 8.2.1.2. RECORDING SPEED (FRAMES PER SECOND) This allows the user to configure the re cording speed (FPS) for each channel.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 65 8.2.1.4. SCHEDULE RECORDING User can set the SCHEDULE recording of each Channel. Click the SCHEDULE ( ) button of the desired channel in the RECORDING SETUP menu and you can see the SCHEDULE menu like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 66 8.2.1.5.2. PRE RECORDING TIME Select the desired time for PRE RECORDING TIME by clicking the left button of the mouse on the value.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 67 8.2.1.6. ALARM RECORDING User can set the ALARM RECORDING of each Chan nel. Click the ALARM ( ) button of the desired channel in the RECORDING SETUP menu and you can see the SENSOR men u like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 68 NOTE: This unit cannot use th e Common Microphones. Instead, the User has to connect the audio o ut of a Camera or a Micropho ne with a Line Out facility .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 69 8.3.1.2. HDD INFORMATION User can see the details in formation for the installed HDDs.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 70 8.3.2.1. TIME & DATE At the CLOCK Menu, Double-click TIME & DATE or highlight TIME & DATE and then press the ENTER button and the TIME & DATE setup screen will be displayed like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 71 The default GMT is GMT -08:00. Refer to Appendix 1. TIME ZONE LISTING on page 99. NOTE: Y ou have to match the GMT re lated to their Country Zone. 8.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 72 8.3.3. BUZZER You can hear the beep sound when eve nt occurs or key operation if the BUZZER setup is ON. At the SYSTEM menu, Click the left button of the mouse on the value.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 73 Copy button Live Audio selection Main Menu button PTZ control button NOTE : In case of the PASSWORD CHECK is ON, only ADMIN can set the NEW PASSWORD.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 74 8.3.5. F ACTOR Y DEF AUL T SETTING At the SYSTEM menu, Double-click F ACTOR Y DEF AUL T SETTING or highlight F ACT ORY DE F AUL T SETTING and then press the ENTER button and the F ACTOR Y DEF AUL T window will be displayed like the lef t picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 75 8.3.7. SYSTEM IFORMA TION System Information provides the information about the Sof tware version (Firmware version) of the DVR and Hardware version of the FPGA chip.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 76 8.4.1. NETWORK At the LINK menu, Double-click NETWORK or highlig ht NETWORK and then press the ENTER but ton and you can se e the NETWORK menu like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 77 8.4.1.2.1. IP ADDRESS Define the IP address if the DHCP is set to of f. The DVR should be provided with it s own static IP addre ss. Click the left button of the mouse on the val ue and the pop-up window will be displayed.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 78 8.4.1.4.1. SERVER 1 At the DDNS SERVER me nu, Double-click SERVER 1 or highlight SERVER 1 and then press the ENTER butt on and you can se e the IP address input screen like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 79 8.4.2. RS485 At the LINK menu, Double-click RS-485 or hi ghlight RS-485 and then press the ENTER button and you can see the RS-485 menu like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 80 At the LINK menu, Double-click E-MAIL or highlight E-MAIL and then press the ENTER button and you ca n see the E-MAIL menu like the left picture. Click the X button or press the ESC button to exit from this screen.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 81 8.5. SEARCH At the MAIN MENU, Double-click SEARCH or highlight SEARCH and then press the ENTER button and you ca n see the SEARCH menu like the left picture.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 82 9. CLIENT PROGRAM : DVR VIEWER The DVR V iewer is a dedicated client program that conne cts to, monitors and manages up to 16 DVRs simultaneously .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 83 The DVR viewer will be installed in it s default folder of C:Program FilesDVRDVR-Viewer . If the folder needs to be changed, click o n ‘BROWSE…’ button and th en select a different folder .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 84 NOTE: In case of the Windows XP OS, user has to download the UDF d rivers prior to the installation of the DVR Vie w er Prog ram because the DVR is using th e UDF file system while copying and playing the dat a.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 85 Click on ‘INST ALL ’ for installing the program.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 86 9.2. VIEWER - LAYOUT Locate the DVR Viewe r icon on the desktop and doubl e-cli ck on it to run the client software. The program can also be located in ST ART - Programs – DV R-Viewer .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 87 9.3. CONFIG ① Version Number Display the current version of the DVR Viewer program. CDR0860 (8channel) CDR (16channel) NOTE: CDR0860 /CDR1660: It can be seen in information of the 8channel or 16channel ② COPY Copy and the Live + Copy.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 88 ③ Video Enhance User can adjust the Brightness of screen by c licking on the bar or dragging the slider on the bar. User can adjust the Contrast of screen by clicking o n the bar or dragging the slider on the bar.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 89 9.4. CONNECTION Click on the CONNECT b utton of the DVR VIEWER. By clicking the Connect button, the below windo w pops up. Click on the Ne w button , the below screen appears.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 90 DVR. Once the User enters the above detail s, he can save the data by clicking on the SA VE button. 9.5. CAPTURE User can take a snapshot in the Live mode by clicking on the CAPTURE icon as shown in the below screen.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 91 a) Sav e to file. The picture can be saved as a JPEG or Bitmap format. b) Print Send the picture to the printer . c) Printer Setup User can print the .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 92 9.7.1. PLA YER User has to this screen to playback the recorded vide o.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 93 1) MULTI SCREEN User can split the screen into 4, 9 and 16 by clicking the Multi Screen icon. 2) STATUS DISPLAY User can see the status of t he playback data along with time and date by pressi ng the below said icons.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 94 5) CONVERT AVI a) User can click on the CONVERT AVI butt on to convert the file into AVI format. At first, click the CONVERT AVI button b) Next, select the folder for A VI f ile will be saved.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 95 c) AVI Converting the Message. d) Converting Complete.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 96 6) PRINT In live or playback mode, sele ct any of the channel s and then click on PRINT to bring u p t h e s c r e e n p r i n t w i n d o w . e) Save to file.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 97 8) BRIGHTNESS/CONTRAST/SATURATION User can adjust the Brightness of screen by clicking on the ba.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 98 9.8. COPY It is possible to copy the recorded dat a from the DVR system to a client PC by using the Co py button in the Multi mode only . Click the Copy button to view the below scree n.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 99 9.10. Pan / Tilt and Preset Buttons User can control the PTZ camera through DVR V iewer . Please refer to the below diagra m for more detailed explanation on PTZ functions.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 100 5) PRESET Functions User can set a maximum of 255 preset positions. By clicking on the Move button, User can move the camera to the desired location.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 101 10. INTERNET EXPLORER (WEB BROWSER) The system requirement is same as network cli ent viewer. Enter the address on internet window www.cloverddns.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 102 Click “T rusted site” and Enter “SITE” box. Add the address – https://www.cloverddns.com in blank and click the “ADD” button. Then, you can see the site ( https://www.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 103 If you still see this page, please allow the “Active control” and inst all it. And you can see the left S ecurity window . Please Click “INST ALL” button.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 104 Y ou can execute “Web browser” now . Enter the IP addre ss or Mac address to connect the DVR. Refer to chapter 9. CLIENT PROGRAM : DVR VIEWER on page 82 for operatin g the web browser .
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 105 11. Hard Disk Drive (HDD) Installation a) Remove the top cover of your DVR an d conn ect both the power and Signal (SATA) cables to the HDD as shown below.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 106 12. APPENDIX CONTENTS 12.1. TIME ZONE LISTING 12.2. RECORDING TIME T ABLE 12.3. F ACTORY DEF AUL T SETTINGS 12.4. W arranty & Factory Service 12.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 107 GMT+02:00 Jerusalem GMT+03:00 Baghdad GMT+03:00 Kuwait, Riyadh GMT+03:00 Moscow , S t.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 108 12.2. RECORDING TIME TABLE HDD : 500GB , Based on 4 cameras IMAGE SIZE IMAGE QUALITY 1CH Record.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 109 12.3. FACTORY DEFAULT VALUES SCREEN CDR1660(16CH) CDR0 860(8CH) CDR0460(4C H) AUTO SEQUENCE SEQ.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 110 CDR1660 (4,8,12,16CH) HALF D1 6 NORMAL X X X CDR0860 (1~8CH) HALF D1 15 NORMAL X X X CDR0460 (1.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 111 SYSTEM LOG SYSTEM INFORMA TION LIN K NETWORK DHCP OFF ST A T IC IP IP ADDRESS 192.1 68.0.2 SUBNET MASK 255.255.255.0 GA T EW A Y 192.168.0.1 DNS 0.
MODEL: CDR1660 / CDR0860 / CDR0460 H . 2 6 4 S T A N D - A L O N E D V R U S E R M A N U A L V 2 . 6 112 12.4. Warranty & Factory Service Limited 2Y ear W arranty This warranty gives the original purcha ser spec ific legal rights and you may also have other rights, which may vary from state to state.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Clover Electronics CDR0860 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Clover Electronics CDR0860 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Clover Electronics CDR0860 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Clover Electronics CDR0860 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Clover Electronics CDR0860, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Clover Electronics CDR0860.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Clover Electronics CDR0860. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Clover Electronics CDR0860 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
