Manuale d’uso / di manutenzione del prodotto OL-27407-01 del fabbricante Cisco Systems
Vai alla pagina of 254
Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco we bsite at www.
THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATION , AND RECOMMEN DATIONS I N THIS MANUA L ARE BELIEVE D TO BE ACCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
Contents 1 Cisco 800 Series Integrated Services Router Hardware Installa tion Guide OL-27407-01 Preface vii Objective vii Audience vii Organization viii Conventi ons viii Related Documentation xvi Sea.
Contents 2 Cisco 800 Series Integrated Services Router Hardware Installation Guide OL-27407-01 Cisco C886VA Router 1-59 Cisco C886 VA J Router 1-60 Cisco C887VA Router 1-61 Cisco C887VAM Router 1-62 C.
Contents 3 Cisco 800 Series Integrated Services Router Hardware Installa tion Guide OL-27407-01 Installing on a Table 2-38 Mounting on a Wall 2-38 Installing the Router Ground Connection 2-41 Installi.
Contents 4 Cisco 800 Series Integrated Services Router Hardware Installation Guide OL-27407-01 Connecting an xDSL Line 3-31 Connecting Power over Ethern et 3-34 Connecting the AC Adapte r 3-35 Connect.
Contents 5 Cisco 800 Series Integrated Services Router Hardware Installa tion Guide OL-27407-01 Power Supply A-22 Wireless Access Poin t A-22 FE and GE Port Pinouts A-2 3 Console and Auxiliary Port Connector Pinouts A-24 FXS and FXO Port Connector Pinouts A-24 VDSL2 Port Connector Pinouts A-24 ADSL2+ Port Connector Pinouts A-25 V.
Contents 6 Cisco 800 Series Integrated Services Router Hardware Installation Guide OL-27407-01.
vii Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Preface This preface describes the objectiv es , audience, organizatio n, and con ventions of this guide and describes related docu ments that ha ve additional information.
viii Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Organization This guide is or ganized into the follo wing chapters and appendi x. Conventions This section describes the con ventions used in this guide. Note Means reader take note .
ix Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 War ni n g IMPORT ANT SAFETY INSTRUCTIONS This warning symbol means danger .
x Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Avvertenza IMPORT ANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo.
xi Cisco Integrated Services Router Hardware Installation Guide OL-27407-01.
xii Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xiii Cisco Integrated Services Router Hardware Installation Guide OL-27407-01.
xiv Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 War ni n g When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using a ny other cables/adaptors could cause a malfunction or a fire.
xv Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 War ni n g If the symbol of suitabilit y with an overla id cro ss appe ars above a port, you must no t con nect the port to a public network tha t follows the European Uni on standards.
xvi Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 War ni n g Read the installation instruc tions before connecting the system to the power sou rce. Statement 1004 War ni n g Ultimate disposal of this product should be han dled according to al l national laws and regulations.
xvii Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Subscribe to the What’ s New in Cisco Pr oduct Documentation as a Really Simple S yndication (RSS) feed and set content to be deliv ered directly to your deskto p using a reader applicatio n.
xviii Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01.
CH A P T E R 1-1 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 1 Product Overview This chapter provides an overview of the features a vailable for the Cisco 812, Ci sco 819,.
1-2 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series The 3rd Generation (3G) is a generation of stand ards for mobile technology that f acilitates gro wth, increased in bandwidth, and supports more di verse application s.
1-3 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Figure 1-2 sho ws the 3G antenna and LEDs display .
1-4 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Figure 1-3 sho ws the I/O side of the Cisco 812 ISR.
1-5 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es • Ceiling and W all Mounting O ption • LED indicators for the platform Antenna The Cisco 812 ISR supports 3G e xternal antenna and W iFi embedded antenna.
1-6 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series RSSI 1 White, Green, Light Blue, or Blue (solid) Signal > –60 dBm V ery strong signal White, Green, Light Bl ue, or Blue (three blinks and then a long pause ) Signal <= –60 to 74 dBm Strong signal.
1-7 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Ta b l e 1 - 2 describes the W iFi LED for the Cisco 812 ISR. T able 1 -2 Cisco 812 ISR WiFi LED De scr iptions Message T ype Color Description Boot loader status sequence Blinking Green DRAM memory test in prog ress.
1-8 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Memory The Cisco 812 ISR supports 512 MB DRAM and 512 MB compact flash memory . The Host router software runs on the f irst core.
1-9 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Figur e 1 -4 P oE+ Split ter I/O Side SKU Information Ta b l e 1 - 3 lists the dif ferent SKU s av ai lable for the Cisco 812 ISR.
1-10 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Cisco 819 Series This section prov ides an o vervie w of the features av ail.
1-11 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es than replacing a wired LAN withi n a buildin g or campus. WLANs use radio frequen cy to tran smit and recei ve data o ver the air , minimizing the need for wired connections.
1-12 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Figur e 1 -6 Cisco 819HGW Int egrated Services Router Figure 1-7 sho ws the front panel details of the Cisco 819HG ISR.
1-13 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Figure 1-8 shows the front p anel details of the Cisco 819HGW ISR.
1-14 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Figure 1-9 sho ws the front panel details of the Cisco 819 4G L TE ISR.
1-15 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es C819HG-B-K9 Compact Hardened 3G IOS Ro uter wit h Bharat generic EVDO Re v A.
1-16 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Ta b l e 1 - 5 lists the dif ferent SKUs a v ailable for the Ci sco 819HGW , Cisco 819H, and Cisco 819HWD ISRs.
1-17 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Ta b l e 1 - 6 lists the dif ferent 4G L TE SKUs av ailable for the Cisco 819HG and Cisco 819G ISRs.
1-18 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Overvi ew Cisco 810 Series Rebranding of C8xx-B and EHWIC-3G-EVDO-B The C881G-B-K9, C819G-B-K9, and EHWIC-EVDO-B (B harat) SK Us are introduced as an umbrella SKU to cov er BSNL, T ata, and Reliance service pro viders in India.
1-19 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Hardware Features This section provides an overview of the follow ing hardware features fo r the Cisco 819 ISR .
1-20 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series 1 GB Compact Flash support in IDE mode (internal) —Y e s Y e s Cisco EnergyW ise Y es Y es — Dual 802.
1-21 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Antennas The Cisco 819 3G routers pro vide two stand ard panel-mount TNC connectors to support the 3 G antenna and the di versity and GPS e xternal antenna.
1-22 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series A C T Green Network acti vity on FE Switch ports, GE W AN port, 3G cellular interface, and serial interfaces. Off No network activity .
1-23 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Ta b l e 1 - 9 describes the WLAN LEDs for the C isc o 819HGW and Cisco 819HWD ISRs. 3G Green (one blink and then a pause ) For 1xR TT , EGPRS, or GPRS service.
1-24 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series Ta b l e 1 - 1 0 describes the 4G L TE LEDs for the Cisco 819 ISR. Boot loader errors Blinking Red and Blue FLASH f ile system f ailure.
1-25 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Memory The Cisco 819HG and Cisco 819G ISRs uses non-up gradable flash memory and main memory . The onboard flash memory contains the Cisco IOS software image and th e boot flash contains the R OMMON boot code.
1-26 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series Embedded 3G Modem The 3G cellular interf ace is the primary W AN data l ink , but it can also be used as a backup data link.
1-27 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Supported Cisco Antennas an d Cables The Cisco 819 ISR pro vides two standard panel-mount TNC con nectors to support the 3G antenna and the di versity and GPS extern al antenna.
1-28 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series Ta b l e 1 - 1 4 lists the supported Cisco W iFi antenna for Cisco 819HGW and Cisco 819HWD ISRs. T able 1 -14 Supported Cisco WiFi Antenna Antenna Frequency band(s) Mounting Mechanical IP Rating Peak Gain 2.
1-29 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Ta b l e 1 - 1 5 lists the Cisco 4G L TE antennas that are supported for use on Cisco 8 19 ISRs.
1-30 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series Ta b l e 1 - 1 6 to Ta b l e 1 - 1 8 li st the extension ca bles for use w ith 3G, W iFi, and 4G L TE antennas. The tables include the insertion loss information for the ultra-lo w-loss (ULL) LMR 400 exten sion cables.
1-31 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Seri es Serial Port The Cisco standard High Speed Smart Seri al 12-in-1 connector all ows t he highest flexi bility of connections to various DTE/DC E de vices.
1-32 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 810 Series Figure 1 -1 0 12-in-1 Ser ial Por t Power Supply All SKUs requir e a 5 VDC po wer source. Cisco 819HG and Cisco 819G ISRs ha ve a self- locking Mole x mini-f it connector .
1-33 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series The vehicle po wer adapters may be us ed for fix ed or mobi le installations. The y do not pro vide electri cal isolation; the inpu t nega tiv e is connected to the output neg ati ve (ch assis ground).
1-34 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Note Some illustrations in this do cument sho w a wirele ss router . Both wireless and nonwireless models are av ailabl e in the Cisco 860 series, Cisco 880 series, an d Cisco 890 series ISRs.
1-35 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-7 sho ws the front panel details of the Cisco 860 wireless router .
1-36 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Cisco 860VAE Series ISRs The Cisco 860V AE series ISR s are fi xed-conf iguration data routers. This section describes the features of the products in this seri es.
1-37 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-13 sho ws the front panel details of the Cisco 866V AE, Cisco 867V AE, Cisco 866V AE-K9, and Cisco 867V AE-K9 integrated services routers (I SRs).
1-38 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Figure 1-15 sho ws t he back pa nel detai ls of the Cis co 867V AE-K9.
1-39 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Common Features The follo wing ke y features are common to each of these router models: • Dual W AN interface (Gigabit Ethernet [GE] and dual-mode ADSL2+ /VDSL2) • 2.
1-40 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Note For the Cisco C867V AE-POE-W -A-K9, Power -ov er-Ethernet (PoE) is a vail able using port FE0, with a 60-W po wer supply .
1-41 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series LED Indicators on Front Panel The front panel includes seve ral LED indicators. Figure 1-17 shows the location of the LED indicators.
1-42 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Ta b l e 1 - 2 5 describes the LED indicators. Cisco 880 Series ISRs The Cisco 880 series ISRs ha ve data and v oice capabilities .
1-43 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series • Integrated 4- port 10/100 Ethe rnet switch for connecting to the LAN • 10/100 FE, VDSLoPO TS, ADSL over PO TS, ADSL ov er ISDN, DSL Multi-mode (VDSL/ADSLoPO TS, VDSL/ADSLoISDN Cisco V A models on ly), or G.
1-44 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Figure 1 -18 Fr ont Panel of the Cisco 880 Ser ies Wir eless Data Router Figure 1-19 sh ow s the back panel details of the Cisco 886V A data router .
1-45 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-20 sh ows the b ack panel details of the Cisco 887V A and 886V A-M data router .
1-46 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Cisco 880 Series Voice and Data Routers The Cisco 880 series voice and data routers pr ovide both voice and data ports.
1-47 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-22 sh ows the fr ont panel details of the Cisco 881 SRST and Cisco 888 SRST wireless v oice router .
1-48 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Figure 1-23 sho ws the back pa nel details of the Cisco 881SR ST -W voice router . Figur e 1 -23 Back P anel of the Cisco C881SRST -W V oice Router 1 Primary W AN port 1 —10/100 FE 1.
1-49 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-24 sho ws the back pa nel details of the Cisco 888SR ST -W voice router .
1-50 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Note Configuri ng the codec comple xity sett ing to support se cure calls uses DSP resources, but does not affect the maximum number of suppo rted calls.
1-51 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-26 sho ws the back panel for the Cisco 887V A-V - W router . The Cisco 887V A-V (non-wireless) router does not ha ve th e antennas on the back panel.
1-52 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Cisco 880 Series with Embedded WLAN Antennas Some Cisco 880W , 880WD, and 880-WD ISRs hav e three embedded WLAN antennas.
1-53 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series Figure 1-29 sh ow s the back panel details of the C8 87V A-WD-A-K9 and C887V A-WD-E-K9 ISRs.
1-54 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 890 Series Figure 1-31 sho ws t he back pa nel details o f the C881W D-A-K9 and C8 81WD-E-K9 ISRs.
1-55 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco 860, 880, 89 0 Series C881G-U-K9 ISRs The C881G-U-K9 ISR is a member of the Cisco 880 seri es data routers. These routers provide inte grated V irtual Pri vate Network (VPN), embedded W i-Fi CER TIFIED™, 802.
1-56 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Cisco C881, C886, and C887 Series ISRs Cisco C881, C886, and C887 Series ISRs of fer broa dban d speed and simplif ied management to small businesses, small enterprise branches, and telewo rkers.
1-57 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1 -32 Fr ont Panel of the Cisco C881 Router For detailed descriptio n about t he LEDs on the Cisco C880 Series Route rs, see the “LEDs” section on page 1-21 .
1-58 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-33 sho ws the back pane l of the C isco C881 Router . Figure 1 -33 Back P anel of the Cisco C88 1 Router For info rmation on installing t he Cisco C880 Seri es Routers, see : http://www .
1-59 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-35 sho ws the back pane l of the C isco C886V A Router . Figure 1 -35 Back P anel of the Ci sco C886V A Router For info rmation on installing Cisco C88 0 Series Routers, see: http://www .
1-60 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-37 sho ws the back pane l of the Cisc o C886V AJ Router . Figure 1 -37 Back P anel of the Cisco C88 6V AJ Router For info rmation on installing Cisco C88 0 Series Routers, see: http://www .
1-61 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-39 sho ws the back pane l of the C isco C887V A Router .
1-62 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-41 sho ws the back pane l of the C isco C887V AM router . Figure 1 -41 Back P anel of the Cisco C88 7V AM Router For info rmation on installing t he Cisco C880 Seri es Routers, see: http://www .
1-63 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs • DIMM expansi on socket that can accept up to 512 MB.
1-64 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-43 sh ow s the back panel details of t he Cisco 892-W rout er . Nonwireless router s do not ha ve RP-TNC antennas or connectors on th e back panel.
1-65 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-44 sho ws the location of the SFP port in a Cisco 892F-W router .
1-66 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-45 sho ws the back panel of the Cisco 892FSP router . Figure 1 -45 Back P ane l of the Cisco 892FSP Router Figure 1-46 sho ws the front panel of the Cisco 892FSP router .
1-67 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-47 sho ws t he back pa nel of th e Cisco 896V A router . Figure 1 -47 Back P ane l of the Cisco 896V A Router Figure 1-48 sh ow s the front panel of the Cisco 896V A and the Cisco 897V A router .
1-68 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-49 sho ws the back pane l of the Cisc o 897V A router . Figure 1 -49 Back P ane l of the Cisco 897V A Router Figure 1-50 sho ws t he back pa nel of th e Cisco 897V AM router .
1-69 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-51 sh ow s the front panel of the Cisco 897V AM router . Figure 1 -51 Fr on t Panel of the Cisco 897V AM Router Figure 1-52 sho ws t he back pa nel of th e Cisco 897V A W router .
1-70 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-53 sh ow s the front panel of the Cisco 8 97V A W and the Cisco 897V AMW router .
1-71 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C881, C886, and C887 Series ISRs Figure 1-55 sho ws the back pane l of the Cisc o 898EA rou ter . Figure 1- 55 Back P ane l of the Cisco 898EA Router Caution The primary W AN port is design ed for an RJ-45 connector only .
1-72 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Cisco C891 Series ISRs Cisco C891 Series ISRs are designed to deli ver secure broadband, metro Ethernet, wi reless LAN (WLAN) connecti vity , and business co ntinuity .
1-73 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Cisco C891F Router Figure 1-57 sh ow s the front panel of the Cisco C89.
1-74 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Figure 1-58 sho ws the back panel o f the Cisc o C891F Router . Figur e 1 -58 Back P anel of the Cisco C89 1F Router For info rmation on installing t he Cisco C890 Seri es Routers, see: http://www .
1-75 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs For detailed descr iption about the LEDs on Cisco C890 Series Rout er , see “LEDs” section on page 1-21 .
1-76 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Figure 1-60 sho ws the back pane l of the Cisc o C891FW Router . Figur e 1 -60 Back P anel of the Cisco C891FW Router For info rmation on installing t he Cisco C890 Seri es Routers, see: http://www .
1-77 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs • Feature Summary Kensington Lock A K ensingt on security slot i s located on the r outer back panel. T o secure the router to a desktop or other surface, use the K ensington lockdown equipment.
1-78 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Step 2 Press and hold the Reset b utton until t he system status LED begi ns to flash. T ypically , this occurs within 5 seconds.
1-79 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs T o reset the router to the factory def ault configurati on or to load a custom conf iguration f ile, follo w these steps: Step 1 T urn the po wer on.
1-80 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs • For a descriptio n of LEDs for Cisco 860 V AE-W -A-K9, Cisco 860V .
1-81 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs WLAN (5 G Hz) Green On—Radio is connected , SSID is configured, and client is associated, but no data is being recei ved or being transmitt ed.
1-82 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Data BRI B2 Green Blinking—B2 channel is recei ving or sending data, or data is passing through ISDN channel 2. — 887, 887V , 888 models 892 models 3G 8 WW AN 9 Green On—Service is established.
1-83 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Ta b l e 1 - 3 0 describes the LEDs for the Cisco 866V AE, Cisco 867V AE, Cisco 866V AE-K9, and Cisco 867V AE-K9 ISRs. 2. LWAPP = Lightweight Acces s Point Protocol .
1-84 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs GE A CT G reen On —GE W AN interf ace is up. Blinking—GE W A N acti vity (traf f ic in either direction). Of f—De vice is po wered off or G E W AN interface is d own .
1-85 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Ta b l e 1 - 3 1 describes the LEDs for the Cisco 892FSP .
1-86 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Because the LED indicators are shar ed, the L ED illuminates (green) wh en either port is active.
1-87 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Note Flash memory is not upgradable. An e xternal USB fl ash memo ry module may be used if additional flash memory is needed.
1-88 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Fan Some router model s do not ha ve a f an, while other models ha ve either one or tw o fans. The fans spin at full sp eed, as a diagnostic aid, i mmediately after the router is po wered up.
1-89 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs 3G Cellular Data WAN Connectivity The 3G (Evolution Data O nly [EVD O],.
1-90 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Supported Cisco Radio Ante nnas The Cisco 891, Cisco 892, and Ci sco 892F come with three remo v able dipole antennas that can be replaced using the Cisco approved antenna e xtenders listed in Ta b l e 1 - 3 6 .
1-91 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Small Form-Factor Pluggable Port The SFP port supports auto-media-detection, auto-failo ver , and remote fault indication (RFI), as described in the IEEE 802.
1-92 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs Embedded wireless AP Provides W i-Fi CER TIFIED™ 802.11a/b/g/n compliance. The Cisco 860 series rout ers contain a single 802.
1-93 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs USB port, Supports USB 1.1. Provides connectio n for USB de vices such as security tokens and flash memory . The Cisco 880 series routers ha ve a si ngle USB port; the Cisco 890 series routers ha ve tw o USB ports.
1-94 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 1 Product Ov erview Cisco C891 Series ISRs BRI voice port The ISDN BRI S/T voic e interf ace provides a client-side (TE) ISDN S/T physi cal interface for con nectio n t o an NT1 de vice that terminates an ISDN teleph one network .
CH A P T E R 2-1 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 2 Installing the Router This chapter describes the equipment and the pr ocedures for successfully installing t.
2-2 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Items Shipped w ith your Router Unpack the bo x and verify tha t all item s listed o n the inv oice were ship ped with the Cis co 812 ISR.
2-3 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-1 1 0-24 Screws Step 2 Install the PoE+ splitter into the moun ting plate with four 6-32 scre ws. (See Figure 2-2 .
2-4 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figur e 2-2 6-32 Scr ews Step 3 Connect the supplied plenum rated Cat5 cabl e to the GE0 port on the PoE+ spl itter .
2-5 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Step 6 Install the power cord with po wer cord lock to the po .
2-6 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figur e 2-5 T -Rail Installing the SIM Card This section describes how to install and replace the SIM card. Ensure that the router is not mounted to a wall, rack, or DIN rail .
2-7 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-6 A ccessing the SIM Card Step 4 Remove the SIM card and install the ne w cards. Step 5 Reinstall the same 6-32 flat head screws using a sc rew dri ver to secure the access panel back in place.
2-8 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figure 2-7 SIM A ccess P anel Installing the 3G Antenna Note Install the antenna before you mount the Cisco 812 ISR.
2-9 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-8 Installi ng the 3G Antenna Step 2 Orient the antenna pe rpendicular with respect to the floor . Figure 2-9 shows the 3G antenna installed.
2-10 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR • Mounting Bracket , page 2-10 • Ceiling Grip Clips, p .
2-11 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-1 0 Universal Brac k e t In stalled on the Cisco 812 ISR Ceiling Grip Clips Use a ceiling grid clip to mo unt th e router on a suspended ceiling.
2-12 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figure 2-11 sh ow s a ceiling grid clip.
2-13 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-12 T -Rail, Channe l, an d Beam Ceiling Rail T ypes .
2-14 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Step 7 Hold the mounting bracket and insert a 6-32 x 0.1 8-inch scre w into each of the four correspondi ng holes (A, B, or C) and tighten.
2-15 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-14 Suspended Cei ling Mounting Details Mounting the .
2-16 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Note W all mounting is only supported wi th the I/O (antenna) side f acing up. Step 1 Use the mounting bracket as a template t o mark the locations of the mounti ng holes on the brack et.
2-17 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Step 3 (Opt ional) D rill or cut a cable access hole n ear and below the locatio n of the mo unting br acket cable access cov er lar ge enough for the Et hernet cable, buildi ng ground wire, and po wer cables.
2-18 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Step 4 Route the cables through the bracket before you attach the bracket t o the ceiling.
2-19 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-1 7 Connecting the Ring Lug ont o the Gr ounding P oint Step 7 Connect the ring lug to the router groun ding point and reinstall the same 6-3 2 screw .
2-20 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR War ni n g This equipment must be grounded. Never de feat the ground conductor or operate the eq uipment in the absence of a suita bly installed ground conductor .
2-21 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Items Shipped with your Router Unpack the bo x and verify tha t all item s listed o n the inv oice were ship ped with the Cis co 819 ISR .
2-22 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR If you plan to conf igure the software using Ci sco IOS commands through the consol e port, prov ide an ASCII terminal or a PC that is run ning terminal emulation softw are to conn ect to the console port.
2-23 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR War ni n g Do not cover or obstru ct the router vents located on both sides of the rout er; otherwise, overheating could occur and cause d amage to the router .
2-24 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Installing Antennas Note Before you install the Cisco 819 ISR on a table, wa ll, or DIN rail, i nstall the antennas on the fron t panel.
2-25 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-20 Cisco WiFi Antenna Assembly Installing on a Table T o install the router on a table or other flat hor izontal surf ace, f irmly place the router on a table or other horizontal surface.
2-26 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR T o mount the router on a wall, follow these steps: Step 1 Remove the scre ws on the sides of the routers. Step 2 Attach the standard brackets to the chassis using the three screws provided for each bracket.
2-27 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-22 Installing the Router t o the W all Note For hollo w-wall mounting, each bracket requires two w all anchors with washers.
2-28 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR T o attach the Cisco 819 ISR to a 35-mm wi de DIN rail, follo w these steps. Step 1 Attach the DIN ra il to the back of the ro uter using the three screws provided.
2-29 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-25 Cisco 819 ISR Installed with the DIN Rail 282626.
2-30 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Installing the Router Using the Co nfigurable Low Profile D.
2-31 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Configuring the Mount Figur e 2-27 Low Pr ofile DIN Mount Configuration The mount comes conf igured in a bottom cable ex it pos ition, with the rail latches in the slots marked Bottom .
2-32 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Attaching the mount to the router Figure 2-28 Cisco ISR 81 9 mo unted in a Configurable Low Pr ofile DIN moun t T o attach the router to the mount: 1.
2-33 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Installing the Router Ground Connectio n The router must be conn ected to a reliable earth ground . Install the ground wire in accordance with local electrical safety standards.
2-34 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR After you install and properly ground the rout er , yo u can connect the po wer wiring, the LAN cables, and the cables for administrati ve access as required for your inst allation.
2-35 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Step 3 Install the power cord with po wer cord lock and the p.
2-36 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figure 2-34 Installing P o wer S w itch Loc k Figur e 2-35 .
2-37 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 810 ISR Mounting the DC Power Supply War ni n g Read the wall-mounting in structions carefully before beginnin g installation.
2-38 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Note The DC supply is IP 41 compliant in all six or thogonal directions. The mounting o rientation will not affect IP 41 compliance.
2-39 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Equipment, Tools, and Connections This section descri bes the equipment, tools, and conn ections necessary for instal ling your Cisco 860 series, 880 series, and 890 series ISRs.
2-40 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR – T wo number -10 wall an chors with washers, for m ounting the router on a hol low -wall. • W ire crimper for chassis grounding.
2-41 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR War ni n g This equipment must be grounde d. Never defeat the ground conductor or ope rate the equipment in the absence of a suita bly installed ground conductor .
2-42 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR The mounting holes are bidi rectional. Y ou can hang the r outer with the front bezel f acing upw ard or downw ard.
2-43 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Step 3 Hang the router on the scre w without forcibly pushing to wards the wall side. The scre w head may damage the protection wa ll inside.
2-44 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Installing the Router Ground Connection The router must be connected to a reliable earth gro und. Install the ground wire in accordance wi th local electrical safety standards.
2-45 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Step 1 Remove th e four mounting scre ws of the top co ver .
2-46 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Step 2 Install the left-side FIPS cov er , as shown in detail A. Step 3 Rotate and bring into the close posit ion to hinge to the correct he xagon.
2-47 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Step 5 Secure the FIPS cov er with two moun ting scre ws. Step 6 Install the right-side FIPS cov er the same way as the left- side FIPS cov er .
2-48 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Step 8 If the FIPS cove rs are installed with t he rack mount brackets, the adapter plates are n ot required in the installati on.
2-49 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR T o attach the radio antennas to yo ur wireless router , follow these steps: Step 1 Manually screw the an tennas tight to the RP-TNC connecto rs on the back of the rout er .
2-50 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Figure 2-41 Ante nnas Or iented V ertically Up 27.
2-51 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Figure 2-42 Ante nnas Or iented V ertically Down 27.
2-52 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Installing Cisco 890 Series in a Rack The Cisco 890 series ISRs can be mounted i n a rack.
2-53 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Figure 2-44 Attac hing the Rack-mount Br ac k ets to the Cisco 890 Series ISR Caution Chassis installation mu st allo w unrestricted airflo w for chassis cooling.
2-54 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Step 5 Connect the chassis to a re liable earth ground. Fo r the chassis ground connection pro cedures, see the “Installing Cisco 890 Series i n a Rack” section on page 2-52 .
2-55 Cisco Integrated Services Router Hardware Installation Guide OL-27407-01 Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Figure 45 SIM Card Installation 282 3 16 1 2 3 A B .
2-56 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR T o install the SIM cards, follow these steps: Step 1 Open the door cov ering the SIM card slots. a.
CH A P T E R 3-1 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 3 Connecting the Router This chapter describes how to install the Cisc o 860, 880, 890 ISRs and the Cisco 819 ISR.
3-2 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 810 Series Preventing D amage to the Route r T o prev ent damage to your router , fo.
3-3 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 810 Seri es Step 3 (Optional) Connect additional servers, PCs, or w orkstations to t he other Ethernet switch ports. Note Use the Cisco Configurat ion Express to conf igure the Internet connection sett ings.
3-4 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 810 Series Connecting a Terminal or PC to the Console Port Connect a terminal or PC to the Console port either to configure the software by using t he CLI or to troubleshoot problems with t he router .
3-5 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 810 Seri es Connecting a Modem to the Console Port T o connect a modem to the router , follo w these steps: Step 1 Connect the RJ-45 end of the adapter cable to the Console port on the router as sho wn in Figure 3-4 .
3-6 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 810 Series T o connect your Cisco 81 9 ISR to an A C power outlet, follow these steps: Step 1 Connect the A C adapter to an A C po wer outlet.
3-7 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 810 Seri es Figure 3-6 DC P ow er Supply PWR2-20W -12VDC and PWR2-20W -24VDC Step 2 Plug the adapter cord into the router . Note The power ad apters hav e 18 A WG wires for the input connection.
3-8 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Cisco 860, 880, 890 Series This section describes how to connect C isco 860 seri es, Cisco 880 series, and Cisco 890 series ISRs to Ethernet devices, Power ov er Ethernet (PoE), and a n etwork.
3-9 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Note The illustrations i n this chapter sho w a wireless router with antennas attach ed. Non-wireless routers d o not ha ve antennas or ante nna connectors on the ba ck panel.
3-10 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series War ni n g Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3-11 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Preventing Damage to the Router T o prev ent damage to your ro.
3-12 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Connecting a PC, Server, or Workstation T o connect a PC (or o.
3-13 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Connecting a Phone T o connect an 802.3af-compliant ph one to an Ethernet switch port, foll ow these steps: Note A powe r source must be pro vided for the phone to fun ction.
3-14 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Step 2 Connect the other end of the cable to the RJ-45 port on the phone.
3-15 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Connecting the V.92 modem Port War ni n g Hazardous network voltages are present in W AN ports regardless of whether power to the unit is OFF or ON.
3-16 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Connecting a Terminal or PC to the Console Port Connect a terminal or PC to the Console Auxiliary (A ux) port either t o conf igure the software by usin g the CLI or to troublesh oot problems with the router .
3-17 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series When the termi nal emulat or establis hes commu nicatio ns, the rout er prompt is di splayed.
3-18 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Connecting the 3G Card Note For information on embedded multiband, multiservice W AN modems, see Configuring C isco EHWIC and 880G for 3 G (EV -DO Rev A) and Conf iguring Cisco EHWIC and 880G for 3.
3-19 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figure 3-13 Insert ing the 3G Car d Step 2 Open the top of the anti-theft locking brack et, as shown in Figure 3-14 .
3-20 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Step 3 Slide the opened locking brack et under the 3G card.
3-21 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 4 Close the locking bracket, as shown in Figure 3-16 . Figur e 3-16 Closing the Locking Br a ck et Step 5 Insert the screws, as sho wn in Figure 3-17 , and tigh ten with a number 2 Philli ps scre wdri ver .
3-22 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Note The antenna c onnector rece ptacle ma y be located on the left, ri ght, or front of t he 3G card , depending on your card.
3-23 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-19 Ant enna with the SMK-TS- 9 Connect or If you are u sing an e xtension c able, you must at tach the 3G a dapter for e xtended cable antenna t o the body of the rout er .
3-24 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Step 8 Remove th e protecti ve tape from the adh esi ve on the bottom of the an tenna cradl e, then f irmly press the cradle to the flat surface.
3-25 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 2 Locate the hooks on the adapte r as shown in Figure 3-21 .
3-26 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Step 4 Align the circular adapter hole wi th the hol e on the router ch assis from wh ere yo u remo v ed the scre w in Step 1 and use the scre w to attach the adapter to the router as sho wn in Figure 3-23 .
3-27 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 5 Connect the extension cable to th e 3G card, as described in the “Connect ing the 3G Card” section o n page 3-18 .
3-28 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Note Antenna orientation can increase or decrease signal reception due to polarization .
3-29 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series T o connect the Data BRI port to the ISDN service pr ovider , .
3-30 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Step 4 Connect the second unshielded Category 5 cable fr om the telecommunication service port on the splitter to the wal l jack to allo w a link to the netw ork service pro vider .
3-31 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Connecting a GE Line to an GE WAN Port T o connect the Gigabit.
3-32 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Caution Cisco Systems D SL W AN Interf aces are t ested for compli ance with re gulatory st andards such as FCC Part 6 8, ITU-T K.
3-33 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-28 Pr im ary Pr otection Device Location T o connect the router to a global industry stan dard symmetrical high-speed DSL (G.
3-34 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Caution The primary W AN po rt is designed fo r an RJ-45 connecto r only . Damage to the primary W AN port may occur if a non-RJ-45 co nnector is inserted.
3-35 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-30 Connecting P oE for the Cisco 880 an d th e Cisco.
3-36 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series T o connect your Cisco 860 series, Cisco 880 series, or the Cisco 890F SP ISR to an A C power outlet, follo w these steps: Step 1 Connect the router to an A C power outlet as sho wn in Figure 3-31 .
3-37 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-32 Connecting the AC A dapter f or the Cisco 892FSP Figure 3-33 Cisco 892FSP , 896V A, 897V A, and 898EA P ow e r Adapt er Connector Pin Assignment 7 6 GE LAN 5 4 9 GE WAN 8 GE WAN SFP 8 12VDC 2.
3-38 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Step 2 T o secure the power cord to the router , attach the powe r lock clip to the power co rd, sl ide the clip to the end of the DC plug, and secu re the retaining clip i nto the rout er chassis.
3-39 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 3 Snap the latches into the holes on eith er side of the po wer connec tor .
3-40 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series T o conne ct the FXS line, follow these steps: Step 1 Connect one end of the straight-through RJ- 11 cable to the FXS port.
3-41 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series War ni n g Hazardous network voltages are present in W AN ports regardless of whether power to the unit is OFF or ON.
3-42 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series This option allo ws a stepped offhoo k resistance duri ng seiz.
3-43 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figure 3-38 sh o ws a v oice BRI line connec tion. Figur e 3-38 Connecting a V o ice BRI Line Step 2 Connect the other end of the cable to the RJ-45 t elephone outlet or othe r de vice.
3-44 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series War ni n g Ultimate disposal of this product should be han dled according to al l national laws and regulations.
3-45 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Verifying Connections T o verify that all de vices are prop erly connected to the router , first turn o n all the connected de vices, then check the LEDs.
3-46 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series T o wireless LAN WLAN LINK W ireless LAN link status: • Green if at least one clie nt is associated. • Off if no client is associated.
3-47 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series To W A N G E l i n e (860V AE models only) GE Mode On when GE W AN mode is se lected. Off when the de vice is po wered off or when D SL W AN mode is selected.
3-48 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series.
CH A P T E R 4-1 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 4 Initial Configuration This chapter pro vides instructions for initial conf iguration of the Cisco 819, 860, .
4-2 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 890 Series Verifying the Initial Configuration For more information, r efer to the “V erifying the Initial Con figur ation” section o n page 4-6 .
4-3 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 89 0 Series Please change these publicly known initial c redentials using Cisco CP Express or the Cisco IOS CLI. Here are the Cisco IOS commands.
4-4 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 890 Series Setup Command Facility The setup command facility guides you through the conf iguration process by prompting you fo r the specific information that is need ed to conf igure your system.
4-5 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 89 0 Series Step 5 Enter a hostname for the router (this example uses Router). Configuring global parameters: Enter host name [Router]: Router Step 6 Enter an enable sec ret password.
4-6 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 890 Series The confi guration is displayed: The following configuration command script was created: hostname Router enable secret 5 $1$D5P6$PYx41/lQIASK.
4-7 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 89 0 Series Initial Configuration of the Wireless Access Point The embedded wireless access point (AP) runs its own I OS.
4-8 Cisco Integrated Servic es Router Hardware Installation Guide OL-23125-02 Chapter 4 Initial Configuration Cisco 860, 880, 890 Series.
A-1 Cisco Integrated Services Router Hardware Installa tion Guide OL-27407-01 APPENDIX A Technical Specifications This appendix pro vides specif ications for the Cisco 860, 880 , 890 Series ISRs, Cisc.
A-2 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 810 Series T able A -1 Cisco 812 ISR Specifications Description C812G+7-K9 (3G only) C812G-CIFI+7-E-K9 C812G-CIFI+7-N-K9 C812G-CIFI-V-A-K9 C812G-CIFI-S-A-K9 (3G + WiFi) Physical Characteristics Dimensions (H x W x D) 2.
A-3 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 810 Seri es Radio Immunity EN301 489-1, EN 301 48 9-7, and EN301 489 -24 T.
A-4 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 810 Series Mean Time Between Failur e Ground Benign Environment Ta b l e A - 2 lists the Mean T ime Between Failure (MTBF) values for Cisco 812 ISRs.
A-5 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 810 Seri es T able A -3 Cisco 819 IS R Specifications Description Hardened.
A-6 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 810 Series Standard Safety Certif ications UL 6095 0-1, 2nd edition; CA N/CSA C22.
A-7 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 810 Seri es Altitude Operating: –500 to 10,000 ft, de-rat ing operating temperature 1°C per 1,000 f eet Non-operating: –1,000 to 30,000 ft Cable Lengt h Input cable: 1 m Output cable: 1.
A-8 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 810 Series Mean Time Between Failur e Ground Benign Environment Ta b l e A - 4 lists the Mean T ime Between Failure (MTBF) values for Cisco 819 ISRs.
A-9 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 810 Seri es Supported Power Adapters Ta b l e A - 5 and Ta b l e A - 6 list the supported po wer adapters for Cisco 819 ISRs.
A-10 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 810 Series Martek MBRH 0500-D/2 Q21 24 VDC Y es Y es Martek MBRH 0500-D/2 Q2.
A-11 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 860, 880, 890 Series This section pro vides router , port, an d cabling speci f ications for the Cisco 860 series, Cisco 880 series, and Cisco 890 seri es ISRs.
A-12 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series • G.
A-13 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series T able A -7 Router Specifications Description Design Specification (all models except Cisco 860V AE series) Physical Dimensions Dimensions w ith ante nna and rub ber feet (H x W x D) 1.
A-14 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series Cisco 860VAE Series Ta b l e A - 8 lists the system specifications fo r the Cisco 860V AE series routers.
A-15 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E -K9, and Cisc.
A-16 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series Cisco 870 Series Ta b l e A - 1 2 lists the system specifications for the Cisco 870 series routers. Radio technology IEEE 802.
A-17 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 880 Series Ta b l e A - 1 2 lists the system specifications for the Cisco 880 series routers.
A-18 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series T able A -1 1 Rout er Specifications Description Design Specification Physical Dimensions Nonwireless models (H x W x D): • 1.
A-19 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 880G Series 3G Wirele ss Integrated Services Router Ta b l e A - 1 2 lists the system specifications for the Cisco 880G ser ies 3G W ireless Integrated Services routers.
A-20 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series T able A -13 Rout er Specification s Description Design Specification Physical Dimensions Nonwireless models: • H x W x D = 1.
A-21 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 890 Series Ta b l e A - 1 2 lists the system specifications for the Cisco 890 series routers.
A-22 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series Power Supply Ta b l e A - 1 5 lists the maximum input v alues for the po wer su pply used with the Cisco 860, 880, 890 series ISRs.
A-23 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series FE and GE Port Pinouts Ta b l e A - 1 7 describes the RJ-45 connector pinouts for F ast Ethernet (FE) ports with Po wer o ver Ethernet (PoE).
A-24 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series Console and Auxiliary Port Connector Pinouts T able A-19 lists the pinouts for the console and auxi liary port connectors.
A-25 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series ADSL2+ Port Connector Pinouts Ta b l e A - 2 2 lists the ADSL2+ connector pinouts. V.92 Port Connector Pinouts Ta b l e A - 2 3 lists the V .
A-26 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series Ta b l e A - 2 5 lists the pinouts for the symmetrical high-speed DSL (G.
A-27 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide OL-27407-01 Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Voice ISDN BRI Interface Pin Numbers and Functions Ta b l e A - 2 7 lists the interface pin numbers and fu nctions fo r the voic e ISDN BRI port.
A-28 Cisco Integrated Servic es Router Hardware Installation Guide OL-27407-01 Appendix A Tec hnica l Specificatio ns Cisco 860, 880, 890 Series Cable Specifications This section provides specificatio.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cisco Systems OL-27407-01 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cisco Systems OL-27407-01 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cisco Systems OL-27407-01 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cisco Systems OL-27407-01 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cisco Systems OL-27407-01, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cisco Systems OL-27407-01.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cisco Systems OL-27407-01. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cisco Systems OL-27407-01 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
