Manuale d’uso / di manutenzione del prodotto 2010 Aveo Sedan del fabbricante Chevrolet
Vai alla pagina of 382
2010 Chevrolet A veo Owner Manual M In Brief ................ .......... ........... ....... 1 - 1 I n s t r u m e n t P a n e l ... .............................. 1 - 2 Initial Drive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 V ehicle Features .
2010 Chevrolet A veo Owner Manual M Service and Appearance Care . . . . . . . . . . . . . . . . . . . 6-1 S e r v i c e .................................... ....... 6 - 4 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL MOTORS, GM, the GM Emblem, CHEVROLET , the CHEVROLET Emblem, and the name A VEO are registered trademarks of General Motors. This manual describes features that may or may not be on your specific vehicle either because they are options that you did not purchase or due to changes subsequent to the printing of this owner manual.
Safety W arnings and Symbols W arning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Danger indicates a hazard with a high level of risk which will result in serious injury or death. W arning or Caution indicates a hazard that could result in injury or death.
V ehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. 9 : Airbag Readiness Light # : Air Conditioning ! : Antilock Brake System (ABS) g : Audio Steering Wheel Controls or OnStar ® $ : Brake System Warning Light " : Charging System I : Cruise Control B : Engine Coolant T emperature O : Exterior Lamps # : Fog Lamps .
2 NOTES vi.
Section 1 In Brief Instrument Panel .................................. . 1-2 Initial Drive Information .. ........................ . 1-3 Starting the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Remote Keyless Entry (RKE) System .
Instrument Panel 1-2.
A. Outlet Adjustment on page 4 ‑ 19 . B. Instrument Panel Cluster on page 4 ‑ 22 . C. Clock on page 4 ‑ 15 . D. Hood Release on page 6 ‑ 12 . E. Horn on page 4 ‑ 3 . F . Audio System(s) on page 4 ‑ 39 . G. Climate Control System on page 4 ‑ 16 .
Remote Keyless Entry (RKE) System The RKE transmitter is used to remotely lock and unlock the doors from up to 20 m (65 feet) away from the vehicle. Hatchback Sedan Press K to unlock all of the doors. Press Q to lock all of the doors. Press V and hold for approximately one second to open the trunk on the sedan model.
Liftgate T o unlock the liftgate on the hatchback model from outside the vehicle, use the key in the lock cylinder or use the RKE transmitter , if equipped. The handle is located above the right side of the license plate. Pull the handle toward you and raise the liftgate.
The vehicle may have a trunk release lever located on the outboard side of the driver seat. Pull the lever to open the trunk. For more information see T runk on page 3 ‑ 8 . Windows Manual Windows Use the window crank to open and close each window .
Seat Adjustment Manual Seats 1. Lift the bar under the front of the seat to unlock it. 2. Slide the seat to the desired position and release the bar . Push and pull on the seat to make sure it is locked into place. Seat Height Adjuster T urn the knob located on the outboard side of the seat to adjust the height of the driver seat cushion.
Manual Lumbar Move the adjustment lever , located on the outboard side of the seatback, up or down to one of three positions to increase or decrease the lumbar support. The highest position provides the most support and the lowest position provides the least support.
Second Row Seats The rear seatbacks can be folded down to increase cargo space. For detailed instructions see Rear Seat Operation (Sedan) on page 2 ‑ 8 or Rear Seat Operation (Hatchback) on page 2 ‑ 10 . Head Restraint Adjustment The vehicle's front seats have adjustable head restraints in the outboard seating positions.
Sensing System for Passenger Airbag The passenger sensing system will turn off the right front passenger frontal airbag and seat ‐ mounted side impact airbag (if equipped) under certain conditions. The driver airbags are not affected by this. The passenger airbag status indicator will be visible, near the clock, located in the center of the instrument panel when the vehicle is started.
Power Outside Mirrors The control is located on the instrument panel, left of the steering wheel. The ignition must be turned to ON/RUN to adjust the mirrors. 1. Select the mirror by moving the selector switch to L for the driver side mirror or R for the passenger side.
Steering Wheel Adjustment The tilt wheel lever is located under the steering column, slightly to the left. T o adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up or down into a comfortable position. 3. Pull the lever up to lock the wheel in place.
Exterior Lighting Uplevel shown, Base similar The lever on the left side of the steering column operates the exterior lamps. 3 : T urns on the headlamps and other exterior lamps. The headlamps automatically turn off when the ignition key is turned to LOCK/OFF or ACC/ACCESSORY .
Windshield Wiper/W asher Sedan shown Hatchback shown The lever is located on the right side of the steering column. The ignition must be turned to ON/RUN to operate the windshield wipers. HI: Fast wipes. LO: Slow wipes. INT : Move to this position for a delayed wiping cycle.
Climate Controls For vehicles with these climate control systems, the heating, cooling, and ventilation can be controlled for the vehicle. Climate Control System with Heater and Air Conditioning A. T emperature Control B. Fan Control C. Air Delivery Mode Control D.
T ransmission Automatic T ransmission Hold Mode If the vehicle's transmission has hold mode, you can select this mode to allow the automatic transmission to stay in a specific gear range. Select hold mode to help the vehicle maintain traction on slippery road surfaces, such as snow , mud, or ice.
When Hold Mode is selected in D4 (Drive), the transmission is held in 3 (Third) gear , which locks out D4 (Drive). This allows for engine braking when slowing from higher speeds. When Hold Mode is selected in 2 (Second), the transmission will start in 2 (Second) gear instead of 1 (First), helping to reduce wheel spin when starting out on slippery surface such as snow , mud or ice.
V ehicle Features Radio(s) Radio with CD shown O : Press and release to turn the system on. Press and hold this knob for more than two seconds to turn the system off. T urn to increase or decrease the volume. When the system is on, press and release O to mute the system.
Press to play a CD while a portable audio device is playing. Press CD/AUX a second time for the system to begin playing audio from the connected portable audio player . The portable audio device continues playing until it is turned off. For more information about these and other radio features, see Audio System(s) on page 4 ‑ 39 .
Steering Wheel Controls Front View of the Steering Wheel Controls Side View of the V olume Control If the vehicle has this feature, some audio controls can be adjusted at the steering wheel. PWR: Press and release to turn the system on and off. When the system is on, press and release for a short time to mute the system.
Cruise Control The cruise control buttons are located on the right side of the steering wheel. I / O : Press to turn the cruise control on or off. RES+: Press to make the vehicle accelerate or resume to a previously set speed. SET − : Press to set the speed or make the vehicle decelerate.
Sunroof On vehicles with this feature, the switch is located on the headliner between the sun visors and can only be operated when the ignition is turned to ON/RUN. T o vent the sunroof, open the sunshade and then press and hold the driver side switch.
Y ou may notice during cooler conditions that the low tire pressure warning light will appear when the vehicle is first started and then turn off as you drive. This may be an early indicator that your tire pressures are getting low and the tires need to be inflated to the proper pressure.
Hood Release T o open the hood: 1. Pull the hood release handle inside the vehicle. It is located on the lower left side of the instrument panel. 2. At the front of the vehicle, lift up on the secondary hood release lever , located under the front center of the vehicle.
Driving for Better Fuel Economy Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. . Avoid fast starts and accelerate smoothly . . Brake gradually and avoid abrupt stops. . Avoid idling the engine for long periods of time.
OnStar ® OnStar ® uses several innovative technologies and live advisors to provide a wide range of safety , security , navigation, diagnostics, and calling services. Automatic Crash Response In a crash, built in sensors can automatically alert an OnStar advisor who is immediately connected to the vehicle to see if you need help.
The OnStar system can record and transmit vehicle information. This information is automatically sent to an OnStar call center when Q is pressed, ] is pressed, or if the airbags or ACR system deploy . This information usually includes the vehicle's GPS location and, in the event of a crash, additional information regarding the crash that the vehicle was involved in (e.
2 NOTES 1-28.
Section 2 Seats and Restraint System Head Restraints ............................... ..... 2-2 Front Seats ......................................... 2-4 Manual Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Seat Height Adjuster .
Head Restraints The front seats have adjustable head restraints in the outboard seating positions. { W ARNING: With head restraints that are not installed and adjusted properly , there is a greater chance that occupants will suffer a neck/spinal injury in a crash.
Pull the head restraint up to raise it. T o lower the head restraint, press the button, located on the top of the seatback, and push the restraint down. Push down on the head restraint after the button is released to make sure that it is locked in place.
Front Seats Manual Seats { W ARNING: Y ou can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Seat Height Adjuster T urn the knob, located on the outboard side of the seat, to adjust the height of the driver seat. T urn the knob forward to raise the seat and rearward to lower it. Manual Lumbar On vehicles with front seat manual lumbar , the adjustment lever is located on the outboard side of the seatback.
Reclining Seatbacks { W ARNING: Y ou can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving.
{ W ARNING: Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body .
Rear Seats Rear Seat Operation (Sedan) Folding the Seatbacks The rear seatbacks can be folded down to increase cargo space. T o fold down the seatbacks: Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts.
4. Detach the center safety belt from the mini buckle by inserting the ignition key into the slot in the mini buckle, pressing the release button, and allowing the belt to retract. 5. Pull up the release knob located on top of either of the rear seatbacks.
Unfolding the Seatbacks T o return the seatback to the upright position: 1. Hook the safety belts into the safety belt guide. 2. Lift the seatback up and push it to its original position. { W ARNING: If either seatback is not locked, it could move forward in a sudden stop or crash.
3. Detach the center safety belt from the mini buckle by inserting the key into the slot in the mini buckle, pressing the release button, and allowing it to retract. 4. Pull up the release knob, located on the top of the seatbacks, and fold the seatbacks forward and down.
6. Firmly pull the release handles on the rear side of the seat cushion to unlock the seat cushion. 7. Lift the seat cushion up and flip it forward. 8. Clip the hook to the front seat head restraint to keep the rear seat secure. Unfolding the Seats T o return the rear seats to the normal seating position: 1.
Notice: Damage to the safety belt buckle or rear seat locking mechanism can occur if the safety belt and buckles are pinched under the rear seat cushion. Do not place the safety belt and buckles on the floor under the rear seat cushion when the rear seat is put back to the sitting position.
7. Return the safety belt buckles and the center seat safety belt to their original position between the rear seatback and the seat cushion. Make sure the straps of the safety belt and buckles are not twisted. 8. T o reattach the center seat safety belt to the mini buckle, pull it from the retractor .
{ W ARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts.
Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 2-16.
The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... 2-17.
or the safety belts! With safety belts, you slow down as the vehicle does. Y ou get more time to stop. Y ou stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: Y ou could be — whether you are wearing a safety belt or not.
Q: If I am a good driver, and I never drive far from home, why should I wear safety belts? A: Y ou may be an excellent driver , but if you are in a crash — even one that is not your fault — you and your passenger(s) can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers.
Sit up straight and always keep your feet on the floor in front of you. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt.
Q: What is wrong with this? A: The shoulder belt is too loose. It will not give as much protection this way . { W ARNING: Y ou can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury .
Q: What is wrong with this? A: The lap belt is too loose. It will not give nearly as much protection this way . { W ARNING: Y ou can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen.
Q: What is wrong with this? A: The belt is buckled in the wrong buckle. { W ARNING: Y ou can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones.
Q: What is wrong with this? A: The belt is over an armrest. { W ARNING: Y ou can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries.
Q: What is wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { W ARNING: Y ou can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury .
Q: What is wrong with this? A: The belt is behind the body . { W ARNING: Y ou can be seriously injured by not wearing the lap-shoulder belt properly . In a crash, you would not be restrained by the shoulder belt. Y our body could move too far forward increasing the chance of head and neck injury .
Q: What is wrong with this? A: The belt is twisted across the body . { W ARNING: Y ou can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly , or ask your dealer/retailer to fix it.
Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. If you are using a rear seating position with a detachable safety belt and the safety belt is not attached, see Rear Seat Operation (Sedan) on page 2 ‑ 8 or Rear Seat Operation (Hatchback) on page 2 ‑ 10 for instruction on reconnecting the safety belt to the mini-buckle.
4. Push the latch plate into the buckle until it clicks. If the latch plate will not go fully into the buckle, check if the correct buckle is being used. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 2 ‑ 32 .
T o unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Before a door is closed, be sure the belt is out of the way . If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle.
Safety Belt Pretensioners This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly . They can help tighten the safety belts during the early stages of a moderate to severe frontal or near frontal crash if the threshold conditions for pretensioner activation are met.
Safety Belt Extender If the vehicle's safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer/ retailer will order you an extender . When you go in to order it, take the heaviest coat you will wear , so the extender will be long enough for you.
. Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, then return to the booster seat. . Does the lap belt fit low and snug on the hips, touching the thighs? If yes, continue. If no, return to the booster seat.
{ W ARNING: Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly . In a crash, the child would not be restrained by the shoulder belt.
Infants and Y oung Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
{ W ARNING: Never do this. Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 1 10 kg (240 lb) force on a person's arms.
{ W ARNING: Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat.
Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle's owner , are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
{ W ARNING: A young child's hip bones are still so small that the vehicle's regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child's abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure.
A booster seat (C-D) is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window . Securing an Add-On Child Restraint in the V ehicle { W ARNING: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle.
When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer .
Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that children and child restraints be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint; a child riding in a forward-facing child seat; an older child riding in a booster seat; and children, who are large enough, using safety belts.
There are a couple of things you need to know about using child restraints in your rear seat: If you use a child restraint in the center rear seating position (A), the safety belts and the child restraint LA TCH anchors for the rear outside seating positions (B) will not be accessible.
Lower Anchors and T ethers for Children (LA TCH) The LA TCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier . The LA TCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LA TCH system.
T op T ether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
T o assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. Hatchback models may have zippers over the lower anchor areas. If so, unzip the seat cover below the labels to access each lower anchor .
Hatchback For hatchback models, the top tether anchors (B) are located in the rear cargo area, attached to the back wall (A) of the vehicle. Squeeze and pull the front part of the plastic cover to access the top tether anchors. Remove the cargo shade before installing the top tether.
Securing a Child Restraint Designed for the LA TCH System { W ARNING: If a LA TCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly . In a crash, the child could be seriously injured or killed.
Notice: Do not let the LA TCH attachments rub against the vehicle ’ s safety belts. This may damage these parts. If necessary , move buckled safety belts to avoid rubbing the LA TCH attachments. Do not fold the empty rear seat with a safety belt buckled.
2. 5. Route and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using does not have a headrest or head restraint and you are using a single tether , route the tether over the seatback.
Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle. If your child restraint has the LA TCH system, see Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 44 for how to install your child restraint using LA TCH.
3. Push the latch plate into the buckle until it clicks. If you find that the latch plate will not go fully into the buckle, see if you are using the correct buckle. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if necessary .
5. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor . If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
A label on the sun visor says, “ Never put a rear-facing child seat in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates.
In Canada, the law requires that forward-facing child restraints have a top tether , and that the tether be attached. Y ou will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint.
4. Push the latch plate into the buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary . 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
6. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor . If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
Airbag System The vehicle has the following airbags: . A frontal airbag for the driver . . A frontal airbag for the right front passenger . The vehicle may have the following airbags: . A seat-mounted side impact airbag for the driver . . A seat-mounted side impact airbag for the right front passenger .
{ W ARNING: Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward.
Where Are the Airbags? The driver's frontal airbag is in the middle of the steering wheel. The right front passenger's frontal airbag is in the instrument panel on the passenger's side.
Driver Side shown, Passenger Side similar If your vehicle has seat-mounted side impact airbags for the driver and right front passenger , they are in the side of the seatbacks closest to the door . { W ARNING: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death.
When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or right front passenger's head and chest. However , they are only designed to inflate if the impact exceeds a predetermined deployment threshold.
Seat-mounted side impact airbags are not intended to inflate in frontal impacts, near-frontal impacts, rollovers, or rear impacts. A seat-mounted side impact airbag is intended to deploy on the side of the vehicle that is struck. In any particular crash, no one can say whether an airbag should have inflated simply because of the damage to a vehicle or because of what the repair costs were.
What Will Y ou See After an Airbag Inflates? After the frontal and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize the airbags inflated. Some components of the airbag module may be hot for several minutes.
In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. . Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for the airbag system.
The passenger sensing system will turn off the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped) under certain conditions. The driver airbags are not affected by the passenger sensing system. The passenger sensing system works with sensors that are part of the right front passenger seat.
The passenger sensing system is designed to turn off the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped) if: . The right front passenger seat is unoccupied. . The system determines that an infant is present in a child restraint.
If the On Indicator is Lit for a Child Restraint If a child restraint has been installed and the on indicator is lit: 1. T urn the vehicle off. 2. Remove the child restraint from the vehicle. 3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers.
If the Off Indicator is Lit for an Adult ‐ Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, use the following steps to allow the system to detect that person and enable the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped): 1.
Additional Factors Affecting System Operation Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “ Safety Belts ” and “ Child Restraints ” in the Index for additional information about the importance of proper restraint use.
Adding Equipment to Y our Airbag-Equipped V ehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Y es. If you add things that change your vehicle's frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly .
Restraint System Check Checking the Restraint Systems Safety Belts Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly . Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job.
Replacing Restraint System Parts After a Crash { W ARNING: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. T o help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
2 NOTES 2-74.
Section 3 Features and Controls Keys ........................... ..................... 3-2 Remote Keyless Entry (RKE) System . . . . . . . . . . . 3-3 Remote Keyless Entry (RKE) System O p e r a t i o n ................... ............... ... 3 - 4 Doors and Locks .
Keys { W ARNING: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window .
Y our vehicle may have an electronic immobilizer designed to protect your car against theft. If so, only keys with the correct electronic code can be used to start the vehicle. See Immobilizer Operation on page 3 ‑ 14 for additional information. If a replacement key or an additional key is needed, it must be purchased from your dealer/retailer or certified locksmith.
Remote Keyless Entry (RKE) System Operation The Remote Keyless Entry (RKE) transmitter functions work up to 65 feet (20 m) away from the vehicle. There are other conditions which can affect the performance of the transmitter . See Remote Keyless Entry (RKE) System on page 3 ‑ 3 .
Programming T ransmitters to the V ehicle Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/retailer . When the replacement transmitter is programmed to the vehicle, all remaining transmitters must also be programmed.
Doors and Locks Door Locks { W ARNING: Unlocked doors can be dangerous. . Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked.
Central Door Unlocking System The vehicle may be equipped with the central door unlocking system. This system is activated from the driver door . From the outside, lock or unlock all the doors by using either the key or the RKE transmitter , if equipped.
Opening a Rear Door When the Security Lock is On 1. Unlock the door from the inside. 2. Open the door from the outside. If you do not cancel the security lock, adults or older children who ride in the rear will not be able to open the rear door from the inside.
T o open the trunk on a sedan from outside of the vehicle, insert the key into the lock cylinder and turn the key clockwise or use the RKE transmitter , if equipped. See Remote Keyless Entry (RKE) System Operation on page 3 ‑ 4 . Remote T runk Release This feature allows the trunk to be opened from inside the vehicle.
Emergency T runk Release Handle Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle. The emergency trunk release handle is only intended to aid a person trapped in a latched trunk, enabling them to open the trunk from the inside.
W ARNING: (Continued) . Adjust the Climate Control system to a setting that brings in only outside air and set the fan speed to the highest setting. See Climate Control System in the Index. . If the vehicle is equipped with a power liftgate, disable the power liftgate function.
Windows { W ARNING: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Manual Windows Use the window crank to open and close each window . The rear windows do not open fully . Power Windows { W ARNING: Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed.
Window Lockout The window lockout is located with the driver power window switches. Press the lockout button to stop the rear passengers from using the rear window switches. The driver can still operate all the windows with the lockout on. Press the lockout button again to return to normal window operation.
Y our vehicle has a special key that works with the theft-deterrent system. There is a transponder in the key head that is electronically coded. The correct key will start the vehicle. An invalid key immobilizes the engine. If your key is ever damaged, you may not be able to start your vehicle.
Arming the System T o arm the system, do the following: 1. Close the doors, the windows, the hood, and the trunk or liftgate. Make sure that the windows are closed, as the system can be armed even if the windows are open. 2. T urn the key to LOCK/OFF and remove the key from the ignition.
How the System Alarm is Activated If a door or the trunk or liftgate is opened without using the key or the remote keyless entry transmitter , the horn will sound and the lamps will flash for up to 30 seconds. How to T urn Off the System Alarm If the system alarm is active, it can be deactivated using one of the following methods: .
Ignition Positions The ignition switch has four different positions. { W ARNING: On manual transmission vehicles, turning the key to LOCK/OFF will lock the steering column and result in a loss of ability to steer the vehicle. This could cause a collision.
Starting the Engine Automatic T ransmission Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. T o restart the engine when the vehicle is already moving, use N (Neutral) only . Notice: Do not try to shift to P (Park) if the vehicle is moving.
3. If the engine still will not start, or starts but then stops, it could be flooded with too much gasoline. T ry pushing the accelerator pedal all the way to the floor and holding it there as you hold the key in ST ART for about three seconds. If the vehicle starts briefly but then stops again, do the same thing, but this time keep the pedal down for five or six seconds.
{ W ARNING: Plugging the cord into an ungrounded outlet could cause an electrical shock. Also, the wrong kind of extension cord could overheat and cause a fire. Y ou could be seriously injured. Plug the cord into a properly grounded three-prong 1 10-volt AC outlet.
Attached Extension Cord 1. T urn off the engine. 2. Open the hood and unwrap the electrical cord. The cord is located in the driver side of the engine compartment, near the battery . 3. Plug it into a normal, grounded 1 10-V olt AC outlet. { W ARNING: Plugging the cord into an ungrounded outlet could cause an electrical shock.
Automatic T ransmission Operation If the vehicle has an automatic transmission, the shift lever is located on the console between the seats. Movement between certain positions requires pushing the release button on the front of the shifter . P (Park): This position locks the front wheels.
R (Reverse): Use this gear to back up. When shifting from N (Neutral) to R (Reverse), you need to apply the brake pedal and push the release button on the front of the shifter . Notice: Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission.
Notice: Do not drive in 2 (Second) at speeds over 65 mph (105 km/h), or you can damage the transmission. Use D4 (Automatic Overdrive) as much as possible. Do not shift into 2 (Second) unless you are going slower than 65 mph (105 km/h) or you can damage the engine.
When hold mode is activated, the transmission runs as follows: Selector Lever Position Gear Range D4 Third Gear 2 Second Gear 1 First Gear See Hold Mode Light on page 4 ‑ 29 . When Hold Mode is selected in D4 (Drive), the transmission is held in 3 (Third) gear, which locks out D4 (Drive).
2 (Second): Press the clutch pedal as you let up on the accelerator pedal and shift into 2 (Second). Then, slowly let up on the clutch pedal as you press the accelerator pedal. 3 (Third), 4 (Fourth) and 5 (Fifth): Shift into 3 (Third), 4 (Fourth) and 5 (Fifth), the same way you do for 2 (Second).
Parking Brake The parking brake lever is located between the bucket seats. T o set the parking brake, hold the brake pedal down and pull up on the parking brake lever . If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 4 ‑ 28 .
3. T urn the ignition key to LOCK/OFF . 4. Remove the key and take it with you. If you can leave the vehicle with the ignition key in your hand, the vehicle is in P (Park). Leaving the V ehicle With the Engine Running (Automatic T ransmission) { W ARNING: It can be dangerous to leave the vehicle with the engine running.
Shifting Out of Park V ehicles with an automatic transmission have a shift interlock system. Y ou have to apply the brake pedal before you can shift from P (Park) when the ignition is in the ON/RUN position. See Automatic T ransmission Operation on page 3 ‑ 23 .
Parking the V ehicle (Manual T ransmission) Before leaving the vehicle, do the following: 1. Hold the brake pedal down and firmly apply the parking brake. 2. Fully press in the clutch pedal and place the shift lever into the gear position as stated below: .
Engine Exhaust { W ARNING: Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: . The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes).
Running the V ehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know . { W ARNING: Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle.
Mirrors Manual Rearview Mirror Hold the inside rearview mirror in the center to move it for a clearer view behind your vehicle. Adjust the mirror to avoid glare from the headlamps behind you. Push the tab forward for daytime use and pull it for nighttime use.
Outside Power Mirrors The control is located on the instrument panel, left of the steering wheel. The ignition must be turned to ON/RUN to adjust the mirrors. T o adjust the mirrors: 1. Select the mirror you want to adjust by moving the selector switch to L for the driver side mirror or R for the passenger side mirror.
Storage Areas The vehicle may have shopping bag hooks on each front seatback. Lift the headrest to access the hooks. Glove Box Lift up on the glove box lever to open it. Cupholders T wo cupholders are located in the center instrument panel, below the climate control system.
Sunroof On vehicles with this feature, the switch is located on the headliner between the sun visors. The sunroof only operates when the ignition is turned to ON/RUN. The sunroof can be opened to a vent position or it can be opened all of the way . T o open the sunroof to the vent position, open the sunshade.
2 NOTES 3-38.
Section 4 Instrument Panel Instrument Panel Overview ............... ......... 4-3 Hazard W arning Flashers . . . . . . . . . . . . . . . . . . . . . . . 4-3 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 T ilt Wheel .
Section 4 Instrument Panel T rip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Audio System(s) ................. ............. .... 4-39 A M - F M R a d i o ................................. . 4 - 4 0 Radio with CD .
Instrument Panel Overview Hazard W arning Flashers The hazard warning flasher button is located to the right of the climate control system on the sedan. | Hazard W arning Flasher: Press to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble.
T urn Signal/Multifunction Lever The lever on the left side of the steering column includes the following: G : T urn and Lane-Change Signals 3 : Headlamp High/Low-Beam Changer P : Exterior Light Control # : Fog Lamps, if equipped Flash-to-Pass Feature.
Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. The lever returns to its starting position whenever it is released. If after signaling a turn or a lane change the arrow flashes rapidly or does not come on, a signal bulb may be burned out.
Windshield Wipers Sedan shown Hatchback shown The lever is located on the right side of the steering column. The ignition must be turned to ON/RUN to operate the windshield wipers. Move the lever to one of the following positions: HI (High Speed): Fast wipes.
Misting Function Move the lever toward INT for a single wiping cycle. Hold it there until the windshield wipers start; then let go. The windshield wipers will stop after one wipe. If more wipes are needed, hold the band toward INT longer . Clear ice and snow from the wiper blades before using them.
Rear Window Wiper/W asher { W ARNING: In freezing weather , do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. The vehicle may have a rear window wiper/washer . T urn the rear wiper/washer band to operate the rear window wiper/washer .
The cruise control buttons are located on the right side of the steering wheel. I / O (On/Off): Press to turn the cruise control on or off. RES+ (Resume/Accelerate): Press to make the vehicle accelerate or resume to a previously set speed. SET − (Set/Coast): Press to set the speed or make the vehicle decelerate.
Resuming a Set Speed If the cruise control is set to a desired speed and then the brakes are applied, or the clutch pedal if you have a manual transmission, the cruise control shuts off. But it does not need to be reset. Once the vehicle is going about 39 km/h (24 mph) or more, briefly press the RES+ button.
Ending Cruise Control There are two ways to turn off the cruise control: . Step lightly on the brake pedal, or press the clutch pedal, if you have a manual transmission. . Press I / O on the cruise control pad. Erasing Speed Memory The cruise control set speed memory is erased when the cruise control or the ignition is turned off.
Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day . Fully functional daytime running lamps are required on all vehicles first sold in Canada. The DRL system makes the headlamps come on when the following conditions are met: .
Instrument Panel Brightness This feature controls the brightness of the instrument panel lights. The thumbwheel for this feature is located on the instrument panel to the left of the steering column. Turn the thumbwheel to brighten or dim the lights. Dome Lamp The vehicle has a dome lamp located in the overhead console.
Accessory Power Outlet(s) Accessory power outlets can be used to plug in auxiliary electrical equipment, such as a cellular phone. The accessory power outlet is located next to the parking brake on the center console. T o use the accessory power outlet, remove the protective cap.
Ashtray(s) and Cigarette Lighter The ashtray is located at the lower part of the center instrument panel. T o remove the front ashtray for cleaning, open the ashtray fully , press in the retaining tab and pull the bin out. Notice: If papers, pins, or other flammable items are put in the ashtray , hot cigarettes or other smoking materials could ignite them and possibly damage the vehicle.
Climate Controls Climate Control System For vehicles with these climate control systems, the heating, cooling, and ventilation can be controlled for the vehicle. Climate Control System with Heater and Air Conditioning A. T emperature Control B. Fan Control C.
OFF: Turns the fan off. T emperature Control: T urn clockwise or counterclockwise to increase or decrease the temperature of the air flowing from the system. 9 (Fan Control): Turn clockwise or counterclockwise to increase or decrease the fan speed. The fan must be turned on to run the air conditioning compressor .
For quick cool down on hot days, do the following: 1. Open the windows to let hot air escape. 2. Press ? . 3. Press A/C. 4. Select the coolest temperature. 5. Select the highest 9 speed. Using these settings together for long periods of time may cause the air inside of the vehicle to become too dry .
Rear Window and Outside Mirror Defogger For vehicles with a rear window and outside mirror defogger , they only work when the ignition is turned to ON/RUN. The rear window defogger uses a warming grid to remove fog or frost from the rear window . < (Rear Window Defogger): Press to turn the rear window and outside mirror defogger on or off.
T o change the passenger compartment air filter , use the following steps: 1. Open the glove box halfway down. 2. Grip the glove box by both the upper and lower sides and pull it out of its housing. 3. Remove the filter cover by pressing in on the bottom retaining tab and pulling the cover down.
4. Replace the air conditioner filter . 5. View the air flow arrows on the filter before installing to ensure the filter is installed correctly . W arning Lights, Gauges, and Indicators W arning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
Instrument Panel Cluster United States Manual T ransmission shown, Canada and Automatic T ransmission Similar 4-22.
Speedometer and Odometer The speedometer shows the vehicle's speed in both kilometers per hour (km/h) and miles per hour (mph). The odometer shows how far the vehicle has been driven, in either kilometers (used in Canada) or miles (used in the United States).
Safety Belt Reminders Driver Safety Belt Reminder Light When the engine is started, a chime sounds for several seconds to remind a driver to fasten the safety belt, unless the driver safety belt is already buckled. The safety belt light comes on and stays on for several seconds, then flashes for several more.
Airbag Readiness Light There is an airbag readiness light on the instrument panel cluster , which shows the airbag symbol. The system checks the airbag's electrical system for malfunctions. The light tells if there is an electrical problem. The system check includes the airbag sensor , the airbag modules, the wiring and the crash sensing and diagnostic module.
Passenger Airbag Status Indicator The vehicle has the passenger sensing system. See Passenger Sensing System on page 2 ‑ 65 for important safety information. The vehicle has a passenger airbag status indicator near the clock, located in the center of the instrument panel.
Charging System Light This light will come on briefly when the ignition is turned on, and the engine is not running, as a check to show it is working. It should go out when the engine is started. If it stays on, or comes on while driving, there may have a problem with the electrical charging system.
Brake System W arning Light The vehicle's hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking, both parts need to work. If the warning light comes on, there is a brake problem.
Antilock Brake System (ABS) W arning Light For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started. If the light stays on, turn the ignition to LOCK/OFF or if the light comes on, stop as soon as possible and turn the ignition off.
Engine Coolant T emperature Gauge United States Canada The vehicle has an engine coolant temperature gauge. With the ignition turned to ON/RUN, this gauge shows the engine coolant temperature. If the gauge pointer moves into the red area, the engine is too hot.
Malfunction Indicator Lamp Check Engine Light A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors operation of the fuel, ignition, and emission control systems. It makes sure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment.
The following can prevent more serious damage to the vehicle: . Reduce vehicle speed. . Avoid hard accelerations. . Avoid steep uphill grades. If the light continues to flash, when it is safe to do so, stop the vehicle. Find a safe place to park the vehicle.
Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or might begin programs to inspect the emission control equipment on the vehicle. Failure to pass this inspection could prevent getting a vehicle registration.
The oil light could also come on in three other situations: . When the ignition is on but the engine is not running, the light will come on as a test to show it is working. The light will go out when the ignition is turned on. If it does not come on with the ignition on, there may be a problem with the fuse or bulb.
Fog Lamp Light For vehicles with this feature, the fog lamps light will come on when the fog lamps are in use. The light will go out when the fog lamps are turned off. See Fog Lamps on page 4 ‑ 12 for more information. Cruise Control Light If the vehicle has cruise control, this light comes on whenever the cruise control is set The light will go out when the cruise control is turned off.
Door Ajar Light The door ajar light comes on and stays on until all doors, trunk and liftgate are closed and completely latched. If the key is in the ignition while the driver's door is open, a warning chime also sounds. Fuel Gauge United States Canada The fuel gauge indicates about how much fuel is left when the ignition is turned to ON/RUN.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge: . At the service station, the gas pump shuts off before the gauge reads full. . It takes a little more or less fuel to fill up than the gauge indicated.
T rip Computer The vehicle may have trip computer , it provides the driver with driving information such as the driving distance for the remaining fuel, outside temperature, average fuel economy , and driving time. The trip computer button is located in the lower right area of the tachometer .
Driving Time This display can be used as a timer . The display will show the amount of time that has passed since the timer was last reset. The timer is only running while the vehicle is moving. T o reset the driving time press and hold the trip computer button.
AM-FM Radio Playing the Radio O (Power/V olume) : Press and release to turn the system on. Press and hold this knob for more than two seconds to turn the system off. T urn to increase or decrease the volume. When the system is on, press and release O to mute the system.
T o use Automatic Store: 1. Press and hold AST to use Auto Store mode. 2. Press the pushbutton below the ON tab on the radio display . 3. Automatic Store searches for radio stations with a strong signal and automatically set presets A1 and A2 with new stations.
T o setup the number of favorites pages: 1. Press and hold F A V until the radio setup menu displays. 2. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers. 3. Press F A V to return to the original main radio screen showing the radio station frequency tabs and to begin the process of programming favorites for the chosen amount of numbered pages.
Adjusting the Speakers (Balance/Fade) SOUND (Balance/Fade): Press to adjust the balance or fade. Adjusting the Balance T o adjust the balance: 1. Press SOUND. 2. Press the pushbutton below the Bal tab on the display . 3. T urn O to adjust the setting.
XM Satellite Radio Service XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces. XM Satellite Radio has a wide variety of programming and commercial-free music, coast-to-coast, and in digital-quality sound.
Radio with CD Playing the Radio O (Power/V olume): Press and release to turn the system on. Press and hold this knob for more than two seconds to turn the system off. T urn to increase or decrease the volume. When the system is on, press and release O to mute the system.
AST (Automatic Store): T welve preset stations with the strongest reception in the area can be automatically stored. The radio will only scan stations with a strong signal that are in the selected AM or FM band. If the Automatic Store function is started in the FM band, only FM stations are stored in preset pages A1 and A2.
T o setup the number of favorites pages: 1. Press and hold F A V until the radio setup menu displays. 2. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers. 3. Press F A V to return to the original main radio screen showing the radio station frequency tabs and to begin the process of programming favorites for the chosen amount of numbered pages.
Adjusting the Speakers (Balance/Fade) SOUND (Balance/Fade): Press to adjust the balance or fade. Adjusting the Balance T o adjust the balance: 1. Press SOUND. 2. Press the pushbutton below the Bal tab on the display . 3. T urn O to adjust the setting.
XM Satellite Radio Service XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces. XM Satellite Radio has a wide variety of programming and commercial-free music, coast-to-coast, and in digital-quality sound.
BAND: Press to listen to the radio while a CD is playing. The CD remains inside the radio for future listening. CD/AUX: Press to play a CD when listening to the radio. CDP appears on the display when the CD player has been selected. The CD symbol will appear on the display when a CD is loaded.
CD Messages CHECK CD: If this message displays and/or the CD comes out, it could be for one of the following reasons: . It is very hot. When the temperature returns to normal, the CD should play . . The road is very rough. When the road becomes smoother , the CD should play .
Care of the CD Player Do not add labels to a CD, it could get caught in the CD player . Use a marking pen to write on the top of the CD if a description is needed. Do not use CD lens cleaners, they could damage the CD player . Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged.
Radio with Six-Disc CD Playing the Radio O (Power/V olume): Press and release to turn the system on. Press and hold this knob for more than two seconds to turn the system off. T urn to increase or decrease the volume. When the system is on, press and release O to mute the system.
AST (Automatic Store): T welve preset stations with the strongest reception in the area can be automatically stored. The radio will only scan stations with a strong signal that are in the selected AM or FM band. If the Automatic Store function is started in the FM band, only FM stations are stored in preset pages A1 and A2.
T o setup the number of favorites pages: 1. Press and hold F A V until the radio setup menu displays. 2. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers. 3. Press F A V to return to the original main radio screen showing the radio station frequency tabs and to begin the process of programming favorites for the chosen amount of numbered pages.
Adjusting the Speakers (Balance/Fade) SOUND (Balance/Fade): Press to adjust the balance or fade. Adjusting the Balance T o adjust the balance: 1. Press SOUND. 2. Press the pushbutton below the Bal tab on the display . 3. T urn O to adjust the setting.
Radio Messages for XM Only See XM Radio Messages on page 4 ‑ 63 later in this section for further detail. Playing a CD(s) Loading a CD(s) The CD player can hold up to six CDs. As each CD is inserted, CDP will appear on the display and as each CD is loading.
LOAD: Press to load CDs into the CD player . [ TUNE (Next T rack): Press [ TUNE to go to the next track. The track number will appear on the display . The player will continue moving forward through the CD with each press of [ TUNE. r TUNE (Previous T rack): Press to go to the start of the current track.
INT (Scan): Press the pushbutton below the INT tab on the display to listen to the first few seconds of each track on each CD loaded, INTRO appears on the display . Press the pushbutton again to stop scanning and the current track begins to play . Playing an MP3/WMA CD-R Disc The radio has the MP3/WMA CD-R disc capability .
Care of the CD Player Do not add labels to a CD, it could get caught in the CD player . Use a marking pen to write on the top of the CD if a description is needed. Do not use CD lens cleaners, they could damage the CD player . Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged.
Using an MP3 MP3/WMA CD-R Disc MP3 Format If you burn your own MP3/WMA disc on a personal computer: . Make sure the MP3/WMA files are recorded on a CD-R disc. . Do not mix standard audio and MP3/WMA files on one disc. . Make sure each MP3/WMA file has a .
No Folder When a CD contains only compressed files, the files are located under the root folder . The next and previous folder function does not function on a CD that was recorded without folders or playlists. When displaying the name of the folder the radio displays ROOT .
u SEEK t (Next/Previous Folder) (in MP3/WMA Mode): Press to change the folder . If CD-R does not have any folders, “ ROOT ” flashes on the display for a short time. [ TUNE (Next T rack): Press the up TUNE arrow to go to the next track. The track number displays.
Audio Steering Wheel Controls Front View of the Steering Wheel Controls Side View of the V olume Control If the vehicle has this feature, some audio controls can be adjusted at the steering wheel. PWR (Power): Press and release to turn the system on and off.
Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.
Backglass Antenna (Sedan) V ehicles without OnStar ® have the AM-FM antenna integrated with the rear window defogger , located in the rear window . Make sure that the inside surface of the rear window is not scratched and that the lines on the glass are not damaged.
Section 5 Driving Y our V ehicle Y our Driving, the Road, and the Vehicle . . . . . . . . . . 5-2 Defensive Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 D r u n k D r i v i n g ... ................................ 5 - 2 Control of a V ehicle .
Y our Driving, the Road, and the V ehicle Defensive Driving Defensive driving means “ always expect the unexpected. ” The first step in driving defensively is to wear your safety belt — See Safety Belts: They Are for Everyone on page 2 ‑ 14 . { W ARNING: Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes.
For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological, and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive.
Avoid needless heavy braking. Some people drive in spurts, heavy acceleration followed by heavy braking, rather than keeping pace with traffic. This is a mistake. The brakes might not have time to cool between hard stops. The brakes will wear out much faster with a lot of heavy braking.
Remember: ABS does not change the time needed to get a foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, there will not be enough time to apply the brakes if that vehicle suddenly slows or stops.
If there is a need to reduce speed, do it before entering the curve, while the front wheels are straight. T ry to adjust the speed so you can drive through the curve. Maintain a reasonable, steady speed. W ait to accelerate until out of the curve, and then accelerate gently into the straightaway .
Off-Road Recovery The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy . Ease off the accelerator and then, if there is nothing in the way , steer so that the vehicle straddles the edge of the pavement.
Loss of Control Let us review what driving experts say about what happens when the three control systems — brakes, steering, and acceleration — do not have enough friction where the tires meet the road to do what the driver has asked. In any emergency , do not give up.
Driving at Night Night driving is more dangerous than day driving because some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Night driving tips include: . Drive defensively . . Do not drink and drive.
Hydroplaning Hydroplaning is dangerous. Water can build up under your vehicle's tires so they actually ride on the water . This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road.
Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: . Keep the vehicle serviced and in good shape. . Check all fluid levels and brakes, tires, cooling system, and transmission.
Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction.
{ W ARNING: Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle is stuck in the snow: .
If Y our V ehicle is Stuck in Sand, Mud, Ice, or Snow Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. See Rocking Y our V ehicle to Get It Out on page 5 ‑ 14 . { W ARNING: If you let your vehicle's tires spin at high speed, they can explode, and you or others could be injured.
Loading the V ehicle It is very important to know how much weight your vehicle can carry . This weight is called the vehicle capacity weight or maximum load amount and includes the weight of all occupants, cargo, and all nonfactory ‐ installed options.
The T ire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 6 ‑ 51 and Inflation - Tire Pressure on page 6 ‑ 58 .
Example 1 Item Description T otal A V ehicle Capacity Weight for Example 1 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 150 lbs (68 kg) × 2 = 300 lbs (136 kg) C Available Occupant and Cargo Weig.
Example 3 Item Description T otal A V ehicle Capacity Weight for Example 3 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 200 lbs (91 kg) × 5 = 1,000 lbs (453 kg) C Available Cargo Weight = 0 lbs (0 kg) Refer to your vehicle's tire and loading information label for specific information about your vehicle's capacity weight and seating positions.
Certification Label Label Example ‐ United States Label Example ‐ Canada A vehicle specific Certification label is attached to the center pillar (B ‐ pillar), below the driver's door latch. This label tells you the gross weight capacity of your vehicle, called the Gross V ehicle Weight Rating (GVWR).
If there is a heavy load, it should be spread out. See “ Steps for Determining Correct Load Limit ” earlier in this section. { W ARNING: Do not load the vehicle any heavier than the Gross V ehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GA WR).
T owing T owing Y our V ehicle T o avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Consult your dealer/ retailer or a professional towing service if the disabled vehicle must be towed. See Roadside Assistance Program on page 8 ‑ 7 .
Dinghy T owing Notice: If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty . Do not tow the vehicle with all four wheels on the ground. The vehicle was not designed to be towed with all four wheels on the ground.
4. Set the parking brake and remove the key . 5. For an automatic transmission, insert the key into the shift ‐ lock release slot and shift to N (Neutral). See Shifting Out of Park on page 3 ‑ 30 . 6. Clamp the steering wheel in a straight-ahead position with a clamping device designed for towing.
2 NOTES 5-24.
Section 6 Service and Appearance Care Service ......... .................................... 6-4 Accessories and Modifications . . . . . . . . . . . . . . . . . . 6-4 California Proposition 65 W arning . . . . . . . . . . . . . . . 6-5 California Perchlorate Materials R e q u i r e m e n t s .
Section 6 Service and Appearance Care Center High-Mounted Stoplamp (CHMSL) (Sedan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-47 T aillamps, T urn Signal, Sidemarker , Stoplamps and Back-up Lamps . . . . . . . . . . .
Section 6 Service and Appearance Care Aluminum Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-84 T i r e s ........................................... 6 - 8 4 Sheet Metal Damage . . . . . . . . . . . . . . . . . . . . . . . . . . 6-84 Finish Damage .
Service For service and parts needs, visit your dealer/retailer . Y ou will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: Accessories and Modifications When non ‐ dealer/non ‐ retailer accessories are added to the vehicle, they can affect vehicle performance and safety , including such things as airbags, braking, stability , ride and handling, emissions systems, aerodynamics, durability , and electronic systems like antilock brakes, traction control, and stability control.
California Proposition 65 W arning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals.
Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 7 ‑ 15 . Adding Equipment to the Outside of the V ehicle Things added to the outside of the vehicle can affect the airflow around it.
Gasoline Specifications At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB ‐ 3.5 or 3.51 1 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl (MMT).
Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines might be available in your area. We recommend that you use these gasolines, if they comply with the specifications described earlier . However , E85 (85% ethanol) and other fuels containing more than 10% ethanol must not be used in vehicles that were not designed for those fuels.
W ARNING: (Continued) Keep sparks, flames, and smoking materials away from fuel. Do not leave the fuel pump unattended when refueling the vehicle. This is against the law in some places. Do not re-enter the vehicle while pumping fuel. Keep children away from the fuel pump; never let children pump fuel.
T o remove the fuel cap, turn it slowly counterclockwise. The fuel cap has a spring in it; if the cap is released too soon, it will spring back to the right. { W ARNING: Fuel can spray out on you if you open the fuel cap too quickly . If you spill fuel and then something ignites it, you could be badly burned.
Filling a Portable Fuel Container { W ARNING: Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor . Y ou can be badly burned and the vehicle damaged if this occurs.
Hood Release T o open the hood: 1. Pull the hood release handle inside the vehicle. It is located on the lower left side of the instrument panel. 2. At the front of the vehicle, lift up on the secondary hood release lever , located under the front center of the hood.
3. Lift the hood and release the hood prop from its retainer , located on the underside of the hood. Securely place the hood prop into the slot on the inner fender . T o close the hood: 1. Before closing the hood, be sure all the filler caps are on properly .
Engine Compartment Overview Automatic T ransmission shown, Manual T ransmission similar 6-14.
A. Engine Air Cleaner/Filter on page 6 ‑ 19 . B. Engine Oil Fill Cap. See “ When to Add Engine Oil ” under Engine Oil on page 6 ‑ 15 . C. Brake/Clutch Fluid Reservoir . See “ Brake Fluid ” under Brakes on page 6 ‑ 34 and Hydraulic Clutch on page 6 ‑ 23 .
Checking Engine Oil It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engine Compartment Overview on page 6 ‑ 14 for the location of the engine oil dipstick.
What Kind of Engine Oil to Use Look for three things: . GM6094M Use only an oil that meets GM Standard GM6094M. . SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity , or thickness. Do not use other viscosity oils such as SAE 20W-50.
Cold T emperature Operation If in an area of extreme cold, where the temperature falls below − 29°C ( − 20°F), use either an SAE 5W-30 synthetic oil or an SAE 0W-30 engine oil. Both provide easier cold starting for the engine at extremely low temperatures.
How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a change engine oil light being turned on, reset the system.
T o inspect or replace the air cleaner/filter: 1. Remove the screws and lift off the cover . 2. Inspect or replace the engine air cleaner/filter . 3. Put the cover back on tightly and tighten the screws. See Scheduled Maintenance on page 7 ‑ 3 for replacement intervals.
How to Check Automatic T ransmission Fluid Because this operation can be a little difficult, you may choose to have this done at the dealer/retailer service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick.
Then, without shutting off the engine, follow these steps: 1. Locate the automatic transmission dipstick which is located toward the front of the engine compartment, near the power steering fluid reservoir . See Engine Compartment Overview on page 6 ‑ 14 for more information on location.
Manual T ransmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to the dealer/retailer service department and have it repaired as soon as possible.
How to Check and Add Fluid The reservoir is located near the back of the engine compartment on the driver side of the vehicle. See Engine Compartment Overview on page 6 ‑ 14 for more information on location. T o check the fluid level, look on the side of the reservoir .
{ W ARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury . Keep hands, clothing, and tools away from any underhood electric fan. { W ARNING: Heater and radiator hoses, and other engine parts, can be very hot.
What to Use { W ARNING: Adding only plain water to the cooling system can be dangerous. Plain water , or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle's coolant warning system is set for the proper coolant mixture.
If coolant is visible but the coolant level is not between the Minimum and Maximum marks, add a 50/50 mixture of clean, drinkable water and DEX-COOL ® coolant at the coolant surge tank, but be sure the cooling system is cool before this is done. See Engine Coolant on page 6 ‑ 25 for more information.
How to Add Coolant to the Coolant Surge T ank { W ARNING: Y ou can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Notice: This vehicle has a specific coolant fill procedure.
2. Then keep turning the pressure cap slowly and remove it. 3. Fill the coolant surge tank with the proper mixture to the Maximum mark on the coolant surge tank. W ait about five minutes, then check to see if the level is below the mark. If the level is below the Maximum mark, add additional coolant to bring the level up to the mark.
4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. W atch out for the engine cooling fan. By this time, the coolant level inside the coolant surge tank may be lower .
W ARNING: (Continued) If you keep driving when your engine is overheated, the liquids in it can catch fire. Y ou or others could be badly burned. Stop your engine if it overheats, and get out of the vehicle until the engine is cool. If No Steam Is Coming From The Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious.
Power Steering Fluid When to Check Power Steering Fluid The power steering fluid reservoir is located toward the front of the engine compartment on the driver's side of the vehicle. See Engine Compartment Overview on page 6 ‑ 14 for reservoir location.
What to Use T o determine what kind of fluid to use, see Recommended Fluids and Lubricants on page 7 ‑ 1 1 . Always use the proper fluid. Failure to use the proper fluid can cause leaks and damage hoses and seals. Windshield W asher Fluid What to Use When you need windshield washer fluid, be sure to read the manufacturer's instructions before use.
Brakes Brake Fluid The vehicle has one reservoir for both the brake and clutch hydraulic systems. It is filled with DOT 3 brake fluid. See Engine Compartment Overview on page 6 ‑ 14 for the location of the reservoir . There are only two reasons why the brake fluid level in the reservoir might go down: .
{ W ARNING: With the wrong kind of fluid in the brake or clutch hydraulic system, the brakes or clutch might not work well. This could cause a crash. Always use the proper brake fluid. Notice: . Using the wrong fluid can badly damage brake or clutch hydraulic system parts.
Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, inspect brake pads for wear and evenly tighten wheel nuts in the proper sequence to torque specifications in Capacities and Specifications on page 6 ‑ 93 .
Battery Refer to the replacement number on the original battery label when a new battery is needed. See Engine Compartment Overview on page 6 ‑ 14 for battery location. { DANGER: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm.
Jump Starting If the vehicle's battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely . { W ARNING: Batteries can hurt you. They can be dangerous because: .
Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty . Always turn off the radio and other accessories when jump starting the vehicle. 3. T urn off the ignition on both vehicles.
{ W ARNING: Fans or other moving engine parts can injure you badly . Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too.
7. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good battery . Use a remote positive (+) terminal if the vehicle has one. 8. Now connect the black negative ( − ) cable to the negative ( − ) terminal of the good battery .
9. Connect the other end of the negative ( − ) cable at least 18 inches (45 cm) away from the dead battery , but not near engine parts that move. The electrical connection is just as good there, and the chance of sparks getting back to the battery is much less.
T o disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( − ) cable from the vehicle that had the dead battery . 2. Disconnect the black negative ( − ) cable from the vehicle with the good battery . 3.
Headlamps T o replace a headlamp bulb: 1. Open the hood. See Hood Release on page 6 ‑ 12 . 2. Remove the three bolts to remove the headlamp assembly . 3. Disconnect the wiring harness connector from the rear of the bulb. 4. Remove the headlamp cap. 5.
10. Reinstall the headlamp assembly using the three bolts. Front T urn Signal, Sidemarker and Parking Lamps T o replace a front turn signal or parking lamp bulb: 1. Open the hood. See Hood Release on page 6 ‑ 12 for more information. 2. Remove the three bolts to remove the headlamp assembly .
4. T urn the front turn signal bulb socket counterclockwise. 5. Pull the front turn signal bulb socket out of the lamp housing. 6. Press the bulb inward and turn it counterclockwise to remove it from the bulb socket. 7. Install the new bulb into the socket by pressing it in and turning it clockwise.
Center High-Mounted Stoplamp (CHMSL) (Hatchback) T o replace a CHMSL bulb on the hatchback: 1. Open the liftgate. See Liftgate (Hatchback) on page 3 ‑ 10 for more information. 2. Pull down on the lamp assembly while holding the end of the bracket. 3.
T aillamps, T urn Signal, Sidemarker , Stoplamps and Back-up Lamps T o replace a taillamp, turn signal lamp, stoplamp, or back-up bulb: 1. Open the liftgate or trunk. See Liftgate (Hatchback) on page 3 ‑ 10 or T runk on page 3 ‑ 8 . Hatchback Sedan 2.
License Plate Lamp T o replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps. 2. T urn and pull the license plate lamp toward you through the opening. 3. T urn the bulb socket counterclockwise and pull the bulb straight out of the socket.
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See “ Wiper Blade Check ” for more information. Replacement blades come in different types and are removed in different ways. For the proper type, see Maintenance Replacement Parts on page 7 ‑ 13 .
Tires Y our new vehicle comes with high-quality tires made by a leading tire manufact urer . If you ever have questions about your tire warranty and where to obtain service, see your vehicle W arranty booklet for details. For additional information refer to the tire manufacturer .
Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger car tire and a compact spare tire sidewall. Passenger Car Tire Example (A) Tire Size : The tire size is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type and service description.
(F) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load. For information on recommen ded tire pressure see Inflation - Tire Pressure on page 6 ‑ 58 and Loading the V ehicle on page 5 ‑ 15 .
(D) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load. See Compact Spare Tire on page 6 ‑ 78 and Loading the V ehicle on page 5 ‑ 15 . (E) Tire Inflation : The temporary use tire or compact spare tire should be inflated to 60 psi (420 kPa).
(C) Aspect Ratio : A two ‐ digit number that indicates the tire height ‐ to ‐ width measurem ents. For example, if the tire size aspect ratio is 70, as shown in item C of the illustration, it would mean that the tire's sidewall is 70% as high as it is wide.
Cold Tire Pressure : The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving. See Inflation - Tire Pressure on page 6 ‑ 58 . Curb Weight : The weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, but without passengers and cargo.
Occupant Distribution : Designated seating positions. Outward Facing Sidewall : The side of an asymmetrical tire that has a particula r side that faces outward when mounted on a vehicle. The side of the tire that contains a whitewall, bears white lettering, or bears manufacture r , brand, and/or model name molding that is higher or deeper than the same moldings on the other sidewall of the tire.
V ehicle Maximum Load on the Tire : Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight. V ehicle Placard : A label permanently attached to a vehicle showing the vehicle's capacity weight and the original equipment tire size and recommended inflation pressure.
When to Check Check your tires once a month or more. Do not forget to check the compact spare tire, it should be at 60 psi (420 kPa). For additional information regarding the compact spare tire, see Compact Spare Tire on page 6 ‑ 78 . How to Check Use a good quality pocket-type gauge to check tire pressure.
Accordingly , when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under ‐ inflated tire causes the tire to overheat and can lead to tire failure.
When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light on the instrument panel cluster . The low tire pressure warning light comes on at each ignition cycle until the tires are inflated to the correct inflation pressure.
. Replacement tires or wheels do not match your vehicle's original equipment tires or wheels. T ires and wheels other than those recommended for your vehicle could prevent the TPMS from functioning properly . See Buying New Tires on page 6 ‑ 64 .
When rotating your tires, always use the correct rotation pattern shown here. Do not include the compact spare tire in the tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the tire and loading information label.
When It Is Time for New T ires V arious factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions influence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.
GM recommends replacing tires in sets of four . This is because uniform tread depth on all tires will help keep your vehicle performing most like it did when the tires were new . Replacing less than a full set of tires can affect the braking and handling performance of your vehicle.
Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, including its braking, ride and handling characteristics, stability , and resistance to rollover .
T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1½) times as well on the government course as a tire graded 100.
Wheel Alignment and Tire Balance The tires and wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis.
Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. See Changing a Flat Tire on page 6 ‑ 70 for more information.
Get the vehicle under control by steering the way you want the vehicle to go. It may be very bumpy and noisy , but you can still steer . Gently brake to a stop, well off the road if possible. { W ARNING: Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training.
When the vehicle has a flat tire (B), use the following example as a guide to assist you in the placement of wheel blocks (A). A. Wheel Block B. Flat T ire The following information explains how to use the jack and change a tire. Removing the Spare Tire and T ools The compact spare tire and tools you will need are located in the trunk.
3. Remove the foam tray . 4. Remove the jack, the jack handle and the wheel wrench from the foam tray . 5. T urn the retainer counterclockwise and remove it from the compact spare. 6. Remove the compact spare tire. See Compact Spare Tire on page 6 ‑ 78 for more information.
Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See Changing a Flat Tire on page 6 ‑ 70 . 2. If your vehicle has wheel covers, turn the four plastic caps counterclockwise by hand or by using the wheel wrench.
Hatchback Sedan 5. Locate the notch in the frame near each wheel which the jack head fits in. 6. Position the jack and raise the jack head until it fits firmly into the notch in the vehicle's frame nearest the flat tire. 7. Put the compact spare tire near you.
8. Insert the jack handle into the jack and the wheel wrench onto the end of the jack handle. { W ARNING: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack.
10. T urn the wheel nuts counterclockwise to remove them. 1 1. Remove the flat tire. { W ARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident.
14. Install the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut by hand clockwise until the wheel is held against the hub. 15. Lower the vehicle by turning the wheel wrench counterclockwise. Lower the jack completely . { W ARNING: Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off.
Storing a Flat or Spare Tire and T ools { W ARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury . In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Notice: When the compact spare is installed, do not take the vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails which can damage the tire, wheel and other parts of the vehicle. Do not use your compact spare on other vehicles.
Products that remove odors from the vehicle's upholstery and clean the vehicle's glass can be obtained from your dealer/retailer . Do not clean the vehicle using: . A knife or any other sharp object to remove a soil from any interior surface.
If any of the soil remains, a commercial fabric cleaner or spot lifter may be necessary . When a commercial upholstery cleaner or spot lifter is to be used, test a small hidden area for colorfastness first. If the locally cleaned area gives any impression that a ring formation may result, clean the entire surface.
Care of Safety Belts Keep belts clean and dry . { W ARNING: Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water . Weatherstrips Silicone grease on weatherstrips will make them last longer , seal better , and not stick or squeak.
Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer/retailer . If the vehicle has a basecoat/clearcoat paint finish, the clearcoat gives more depth and gloss to the colored basecoat.
Aluminum Wheels Notice: Using strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels, could damage the surface of the wheel(s). The repairs would not be covered by the vehicle warranty .
Finish Damage Any stone chips, fractures or deep scratches in the finish should be repaired right away . Bare metal will corrode quickly and may develop into major repair expense. Minor chips and scratches can be repaired with touch-up materials available from your dealer/retailer .
V ehicle Identification V ehicle Identification Number (VIN) This legal identifier is in the front corner of the instrument panel, on the driver side. It can be seen through the windshield from outside. The VIN also appears on the V ehicle Certification and Service Parts labels and certificates of title and registration.
The vehicle has an airbag system. Before attempting to add anything electrical to the vehicle, see Servicing Y our Airbag-Equipped Vehicle on page 2 ‑ 70 and Adding Equipment to Y our Airbag-Equipped Vehicle on page 2 ‑ 71 . Headlamp Wiring The headlamp wiring is protected by fuses in the fuse block.
Instrument Panel Fuse Block The instrument panel fuse block is located on the end of the instrument panel on the driver side of the vehicle. T o access the fuses, open the fuse panel door by pulling the door out. T o reinstall the door, first insert the rear edge of the fuse panel door , then push the front of the door into the end of the instrument panel to secure it.
Fuses Usage CLUSTER Brake Switch, TPMS, Anti ‐ Theft Module DEFOG MIRROR Power Mirror Unit, A/C Switch RR DEFOG Rear Defog DOOR LOCK Door Lock NA DRL NA DRL Circuit MIRROR/ SUNROOF Mirror Control Switch, Room Lamp, A/C Switch EMS 1 Engine Room Fuse Block, TCM, VSS, Fuel Pump EMS 2 Stoplamp Switch HORN Horn OBD DLC, Immobilizer CLUSTER/ ROOM LAMP T runk Room Lamp, Trunk Open Switch, IPC, Room Lamp SDM Sensing and Diagnostic Module Fuses Usage SOKET Power Jack STOP LAMP Brake Switch SUNROOF Sunroof Module (Option) T/SIG Hazard Switch WIPER Wiper Switch, Wiper Motor Engine Compartment Fuse Block The engine compartment fuse block is located on the driver side of the vehicle, near the battery .
Fuses Usage F AN HI Cooling Fan HI Relay ABS ‐ 1 EBCM ABS ‐ 2 EBCM Fuses Usage SJB BA TT Instrument Panel Fuse Block ACC/IG1 IGN1 Relay IG2/ST IGN2 Relay , Starter Relay 6-90.
Fuses Usage ACC/RAP Instrument Panel Fuse Block P/WINDOW ‐ 2 Power Window Switch P/W WINDOW ‐ 1 Power Window Switch F AN LOW Cooling Fan LOW Relay A/CON A/C Compressor Relay PKLP LH T ail Lamp (LH.
Relays Usage F/PUMP RELA Y Fuel Pump ST ARTER RELA Y Starter P ARK LAMP RELA Y Park Lamp FRONT FOG RELA Y Fog Lamp HDLP HIGH RELA Y Head Lamp High HDLP LOW RELA Y Head Lamp Low F AN HIGH RELA Y Cooling Fan High Relays Usage F AN LOW RELA Y Cooling Fan Low A/CON RELA Y Air Conditioner ENGINE MAIN RELA Y Main Power ACC/RAP RELA Y I/P Fuse Block IGN ‐ 2 RELA Y Ignition Misc.
Capacities and Specifications The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 for more information. Application Capacities English Metric Air Conditioning Refrigerant R134a For the air conditioning system refrigerant charge amount, see the refrigerant caution label located under the hood.
2 NOTES 6-94.
Section 7 Maintenance Schedule Maintenance Schedule .. ........... .............. . 7-2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Scheduled Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Owner Checks and Services .
Maintenance Schedule Introduction Notice: Maintenance intervals, checks, inspections, recommended fluids, and lubricants are necessary to keep this vehicle in good working condition. Damage caused by failure to follow scheduled maintenance might not be covered by the vehicle warranty .
At your dealer/retailer , you can be certain that you will receive the highest level of service available. Y our dealer/retailer has specially trained service technicians, uses genuine replacement parts, as well as, up to date tools and equipment to ensure fast and accurate diagnostics.
When the change engine oil light displays, certain services, checks, and inspections are required. The services described for Maintenance I should be performed at every engine oil change. The services described for Maintenance II should be performed when: .
. Body hinges and latches, key lock cylinders, and trunk lid hinges and latches lubrication. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 . More frequent lubrication may be required when vehicle is exposed to a corrosive environment. Applying silicone grease on weatherstrips with a clean cloth makes them last longer , seal better , and not stick or squeak.
Once a Month . T ire inflation check. See Inflation - Tire Pressure on page 6 ‑ 58 . . T ire wear inspection. See Tire Inspection and Rotation on page 6 ‑ 62 . Once a Y ear . Starter switch check. See Owner Checks and Services on page 7 ‑ 9 . . Parking brake and automatic transmission P (Park) mechanism check.
First Engine Oil Change After Every 80 000 km/50,000 Miles . Automatic transmission fluid and filter change (severe service only) for vehicles mainly driven in heavy city traffic in hot weather , in hilly or mountainous terrain, when frequently towing a trailer , or used for taxi, police, or delivery service.
Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and filter . Reset oil life system. • • Engine coolant level check. • • Windshield washer fluid level check. • • T ire inflation pressures check. • • T ire wear inspection.
Owner Checks and Services Starter Switch Check { W ARNING: When you are doing this inspection, the vehicle could move suddenly . If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle.
Automatic T ransmission Shift Lock Control System Check { W ARNING: When you are doing this inspection, the vehicle could move suddenly . If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle.
Parking Brake and Automatic T ransmission P (Park) Mechanism Check { W ARNING: When you are doing this check, the vehicle could begin to move. Y ou or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll.
Usage Fluid/Lubricant Automatic T ransmission Use only T -IV Automatic T ransmission Fluid (GM Part No. U.S. 88900925, in Canada 22689186). Manual T ransmission Manual Transmission Fluid (GM Part No. U.S. 89021806, in Canada 89021807). Key Lock Cylinders Multi-Purpose Lubricant, Superlube (GM Part No.
Maintenance Replacement Parts Replacement parts identified below by name, part number , or specification can be obtained from your dealer/retailer . Maintenance Replacement Parts Part GM Part Number A.
Engine Drive Belt Routing 7-14.
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided.
Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-16.
Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-17.
Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-18.
Section 8 Customer Assistance Information Customer Assistance and Information . . . . . . . . . . . 8-2 Customer Satisfaction Procedure . . . . . . . . . . . . . . . 8-2 Online Owner Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Customer Assistance for T ext T elephone (TTY) Users .
Customer Assistance and Information Customer Satisfaction Procedure Y our satisfaction and goodwill are important to your dealer and to Chevrolet. Normally , any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer's sales or service departments.
STEP THREE — U.S. Owners: Both General Motors and your dealer are committed to making sure you are completely satisfied with your new vehicle. However , if you continue to remain unsatisfied after following the procedure outlined in Steps One and T wo, you can file with the Better Business Bureau (BBB) Auto Line Program to enforce your rights.
STEP THREE — Canadian Owners: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps 1 and 2, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/Arbitration Program.
Online Owner Center Online Owner Center (U.S.) — www .gmownercenter .com/chevrolet Information and services customized for your specific vehicle — all in one convenient place. . Digital owner manual, warranty information, and more . Online service and maintenance records .
Customer Assistance for T ext T elephone (TTY) Users T o assist customers who are deaf, hard of hearing, or speech-impaired and who use T ext T elephones (TTYs), Chevrolet has TTY equipment available at its Customer Assistance Center . Any TTY user in the U.
Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V . Customer Assistance Center Paseo de la Reforma # 2740 Col. Lomas de Bezares C.P .
. Model, year , color , and license plate number of the vehicle . Odometer reading, V ehicle Identification Number (VIN), and delivery date of the vehicle . Description of the problem Coverage Services are provided up to 5 years/100,000 miles (160 000 km), whichever comes first.
Services Not Included in Roadside Assistance . Impound towing caused by violation of any laws. . Legal fines. . Mounting, dismounting or changing of snow tires, chains, or other traction devices. . T owing or services for vehicles driven on a non-public road or highway .
Scheduling Service Appointments When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer/retailer can help minimize your inconvenience.
T ransportation Options W arranty service can generally be completed while you wait. However , if you are unable to wait, GM helps to minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Shuttle Service Shuttle service is the preferred means of offering Courtesy Transportation.
Additional Program Information All program options, such as shuttle service, may not be available at every dealer . Please contact your dealer for specific information about availability . All Courtesy T ransportation arrangements will be administered by appropriate dealer personnel.
Aftermarket collision parts are also available. These are made by companies other than GM and may not have been tested for your vehicle. As a result, these parts may fit poorly , exhibit premature durability/corrosion problems, and may not perform properly in subsequent collisions.
If a Crash Occurs Here is what to do if you are involved in a crash. . Check to make sure that you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured. . If there has been an injury , call emergency services for help.
Managing the V ehicle Damage Repair Process In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair . If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there.
Reporting Safety Defects to the Canadian Government If you live in Canada, and you believe that your vehicle has a safety defect, notify Transport Canada immediately , in addition to notifying General Motors of Canada Limited. Call them at 1-800-333-0510 or write to: T ransport Canada Road Safety Branch 2780 Sheffield Road Ottawa, Ontario K1B 3V9 Reporting Safety Defects to General Motors In addition to notifying NHTSA (or T ransport Canada) in a situation like this, please notify General Motors.
Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body , etc. Service Bulletins Service Bulletins give additional technical service information needed to knowledgeably service General Motors cars and trucks.
V ehicle Data Recording and Privacy Y our GM vehicle has a number of sophisticated computers that record information about the vehicle ’ s performance and how it is driven. For example, your vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy airbags in a crash and, if so equipped, to provide antilock braking to help the driver control the vehicle.
Important: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender , age, and crash location) is recorded. However , other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
Radio Frequency Identification (RFID) RFID technology is used in some vehicles for functions such as tire pressure monitoring and ignition system security , as well as in connection with conveniences such as key fobs for remote door locking/unlocking and starting, and in-vehicle transmitters for garage door openers.
A Accessories and Modifications . . . . . . . . . . . . . . . . . . . . . . .6-4 Accessory Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Add-On Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . 6-86 Additives, Fuel .
Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39 Audio Steering Wheel Controls . . . . . . . . . . . . . . . . . . . 4-64 Radio Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-65 Radio with CD .
Care of Safety Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-82 CD, MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61 Center High-Mounted Stoplamp (CHMSL) . . . . . . . .
Coolant Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25 Engine T emperature Gauge . . . . . . . . . . . . . . . . . . . . . . 4-30 Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . .
E EDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Electrical Equipment, Add-On . . . . . . . . . . . . . . . . . . . . . 6-86 Electrical System Engine Compartment Fuse Block . . . . . . . . . . . .
Fuel (cont.) Gasoline Octane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Gasoline Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I Ignition Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 Immobilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 Inadvertent Power Battery Saver . . . . . . . . . . . . . . .
Lights (cont.) Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Fog Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 High/Low Beam Changer . . . . . . . . . . . . . .
N New V ehicle Break-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 O Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 T rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R Radio Frequency Identification (RFID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Radios AM-FM Radio . . . . . . . . . . . . . . . . .
Safety Defects Reporting Canadian Government . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 General Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 U.S. Government . . . . . . . . . . . . . . . . . . . .
T T achometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 T aillamps T urn Signal, Sidemarker , Stoplamps, and Back-Up Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48 T ext T elephone (TTY) Users .
T ransmission Operation, Manual . . . . . . . . . . . . . . . . . . 3-26 T ransportation Program, Courtesy . . . . . . . . . . . . . . . . . 8-10 T rip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 T rip Odometer .
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 Power . . . . . . . . . . . . . . . . . . . . . . . . . .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Chevrolet 2010 Aveo Sedan è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Chevrolet 2010 Aveo Sedan - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Chevrolet 2010 Aveo Sedan imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Chevrolet 2010 Aveo Sedan ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Chevrolet 2010 Aveo Sedan, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Chevrolet 2010 Aveo Sedan.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Chevrolet 2010 Aveo Sedan. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Chevrolet 2010 Aveo Sedan insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
