Manuale d’uso / di manutenzione del prodotto IMAGE FORMULA DR-6010C del fabbricante Canon
Vai alla pagina of 142
User Manual Please read this manual bef ore operati ng this scanner. After you finish reading this manual, store it in a safe place for future reference.
International ENERGY ST AR Program As an EN ERGY ST AR ® Part ner , CANON ELECTRONI CS INC., has deter mined th at this machine meets the E NERGY ST AR ® Program g uidelines for en er gy effi ciency .
INTRODUCTION i INTR ODUCTION Thank you for purchasin g the Canon DR-6010C Do cument Sc anner . P lease read thi s manual thorou ghly before using the scan ner to familiar ize yourself with it s capabil ities, and to make the most of its many funct ions.
INTRODUCTION ii Symbols Used in This Manual The following symbo ls are us ed in this manual to explain procedures, rest ricti ons, handling preca utions, and in struc tions that should b e obser ved for saf ety . W ARNING Indicates a warning concerning operations that ma y lead to death or injur y to per sons if not pe rf ormed corr ectly .
User Man ual Har d ware.
ii Contents Chapter1 Before Usi ng the Scanner .............. ................... .................... ................... 1-1 1-1 Import ant Safety Instructions ..................... ................... .................... ...... 1-1 Installati on Location .
iii 4-2 Removing and Attaching the Rollers ................ .................... ................... 4-5 Roller Replacem ent Cycle ........... ................... ................... .................... ...... 4-5 Resettin g the Counter .............
1-1 Chapter 1 Bef ore Using the Scanner 1-1 Impor tant Sa fe ty Instructions T o ensur e the safe operation of this scanne r , be sure to read th e safety warnings an d precau tions descr ibed below . Installation Location The perfor mance of this scann er is affected by the environme nt in whic h it is ins talled.
Chapter 1 Before Using the S canner 1-2 • A v oid exposing the s canner to ra pid chang es in temperat ure. If the room i n which th e scanner is instal led is col d but r apidly heated, water droplets (co ndensation) ma y f or m inside th e scanner .
Chapter 1 Before Using the S canner 1-3 Handling W ARNING Note the following precautions wh enever using the scanner . Failure to do so may result in a fire or electric shock. ■ Never use alcohol, benzene, paint thinner , aerosol sprays, or an y other highly flammable substance near t he scanner .
Chapter 1 Before Using the S canner 1-4 ■ Do not place objects on top of the scanner . Suc h objects may tip or fall ov er , resulting in personal injury .
Chapter 1 Before Using the S canner 1-5 1-2 Feat ures of the DR-6010C Do cument Scanner The ma in f e atures o f the DR-6010C d ocument sc anner are d escribed below . • Fast Document Feedin g The scan ner can scan a maximum of 60 document s per minute in a range of sizes from business cards t o L TR/A4 s ize.
Chapter 1 Before Using the S canner 1-6 • T ext Enhancement Mode This mo de enables you to sca n documen ts with da rk backgrounds or docu ments with f a int text writte n in pencil clear ly . Note This m ode may not function e ffectively , depen ding on the docu ment type.
Chapter 1 Before Using the S canner 1-7 1-3 Name s and Funct ions of P ar ts This section de scr ibes the nam e and func tion of eac h par t. Make sure to re ad this sec tion and familiarize yoursel f with the par ts of t he scanner bef or e using the scanner.
Chapter 1 Before Using the S canner 1-8 ■ Ba ck V i ew ■ Inter faces (See “2-4 Conne cting the Scanner to the Computer , ” on p. 2- 11.) CA UTION • Do no t bloc k the ventilation openings. Doing so could cause the scanner to o verheat, creating a risk of fi re.
2-1 Chapter 2 Setup 2-1 Setup Pr ocedure In order to prepar e the scanne r f or use, read and follow the instr uct ions in eac h sectio n below . Installation Requirements Installin g the Softw are Co.
Chapter 2 S etup 2-2 2-2 Installat ion Requirements T o use th e DR-6010C scanner, y ou r compu ter must sa tisfy the following sy stem req uirements. • One of the f ollo wing opera ting s ystems: -.
Chapter 2 S etup 2-3 • If the CPU , memor y , interface card, a nd other spe cificat ions do n ot satisfy the i nstalla tion requiremen ts, the scann ing spee d ma y be greatly reduce d and transmis sion may take a long time.
Chapter 2 S etup 2-4 2-3 Ins tallin g the Software This section descr ibes how to i nstall th e required software. Setup Disc When you inse r t the Setup dis c supplied with the scan ner into the CD-ROM dr ive of y ou r computer , the menu shown below shou ld appear.
Chapter 2 S etup 2-5 Software Installation Instal l the software before con necting t he scanner to t he compute r . 1 Log ont o Windows with an account that has A dministrator pr ivile ges. IMPOR T ANT • Be sure to l og on as a n Administ rator . • Close all oth er appli cations be f o re insta lling the so ftware.
Chapter 2 S etup 2-6 4 Click [Install]. Installa tion of the DR-6010C dri v e r begins. 5 Click [Ne xt]. The soft w a re licens e agreement appears. 6 Read the license agr eement and click [Y es] t o accept it.
Chapter 2 S etup 2-7 Nex t, the job tool soft w are is installed . 7 The DR-6 010C dri v e r installa tion is com plete. 8 Clic k [Fin ish]. Installa tion of Captu reP erfect 3.
Chapter 2 S etup 2-8 9 Click [Ne xt]. The soft w a re licens e agreement appears. 10 Read the license agr eement and click [Y es] t o accept it. The ins tallation locatio n screen appears. 11 Click [Ne xt]. CaptureP e rf ect is installed. 12 The Captu reP erfect inst allation is complete.
Chapter 2 S etup 2-9 13 Clic k [Fin ish]. Installa tion of the User Manual star ts. 14 Click [Ne xt]. The User M anual is i nstalled . 15 The User M anual insta llation is complete.
Chapter 2 S etup 2-10 17 Click [E xit]. Click [Back] to retu rn to the menu s creen. 18 After the software inst allation is comple te, y ou can con nect the sca nner to th e computer . (See “2-4 Con necting t he Scanner to the Compu ter , ” o n p .
Chapter 2 S etup 2-11 2-4 Conn ecting the Scanner to the Comput er There ar e two methods f or connectin g the DR-60 10C scanner to a computer : USB con nection, which m akes use of a standar d USB por t on th e computer, and SCSI connect ion, which makes use of a SCSI card ins talled in an e xpansion slot of th e compute r .
Chapter 2 S etup 2-12 3 Connect the power cord into a n A C outlet. b 4 Use the supplie d USB ca b l e to conne ct the sc anner to the comput er . Using a SCSI Connection IMPOR T ANT • Mak e sure th at the compu ter is tur ned O FF before connect ing the SCS I cable.
Chapter 2 S etup 2-13 1 Shut down Win dows and tur n the computer O FF . 2 V er ify that the p ower s wit ch of the sc anner is O FF . If the power switch is in the O N position, push the switch to s et it to OFF . 3 Plug the s upplied pow er co rd into th e power connector on the rear of t he unit .
Chapter 2 S etup 2-14 2-5 T urning th e P o wer ON When you tur n the compu ter and the s canner ON, the Plug a nd Play function of Windows recog nizes the sca nner and auto maticall y insta lls the req uired device dr iver .
Chapter 2 S etup 2-15 Note • In Windows Vis ta and Windows X P , a me ssage ap pears when i nstallat ion is com plete. • In Windows 2000, n o messa ge appear s when ins tallatio n is compl ete. • The DR-6010C is install ed in Device Ma nager und er [Imaging D e v ices] as [ CANON DR- 6010C USB] or [CANON DR-60 10C SCSI].
3-1 Chapter 3 Basic Ope ration 3-1 Doc uments The s canner can scan docum ents ranging i n size from business cards an d checks to A4 si ze docu ments. It can als o scan lon g documen ts up t o 39.2” (100 0 mm). The doc ument si zes that this scanne r can sca n are sh own below .
Chapter 3 Basic Operation 3-2 IMPOR T ANT A docume nt must meet t he follo wing cr iter ia to be scannable: • When scanning a multiple p age docum ent, pages of the sam e size, thickness, and weight must be groupe d together . Scannin g different sizes and t ypes of p aper toge ther can ca use the scann er to jam.
Chapter 3 Basic Operation 3-3 3-2 Doc ument T ra y and Eject T ra y Prepa re the docum ent f eed tray and document e ject tra y accordin g to the pape r size and f eed/ejec t method. Preparing the Document Feed T ray 1 Grasp the mi ddle of the document feed tra y and slowly open it toward you.
Chapter 3 Basic Operation 3-4 Note • The U-tur n path i s used to sc an docum ents on paper of nor mal weight. Scanned documents are ejecte d to the doc ument eje ct tra y . • The straight path is used to scan doc uments on thin pape r , thick paper a nd business car ds that canno t be scan ned throug h the U-tur n pat h.
Chapter 3 Basic Operation 3-5 3-3 Pla cing Docume nts There ar e two methods f or f eeding doc uments, the Page Separation mode and B ypass mode. Feeding pages continuousl y from a sta ck of documen ts pla ced in th e f eed tra y is call ed the Page Separation mode.
Chapter 3 Basic Operation 3-6 CA UTION ■ Do not place the documents on top of the scanner to align them. Doing so ma y cause a malfunction. ■ When placing documents into the f eed tray , take care not to cut your hands on the edges of the paper . 3 Adjust th e documen t guid es so tha t they are wider t han the doc ument to be scanned .
Chapter 3 Basic Operation 3-7 5 Adjust th e documen t guides to fi t the width of the doc ument. Note Before scanning, make sure tha t the document is not curl ed or creas ed, and that it is placed in the feed tra y c orrectly . Scann ing an improper ly plac ed, cur led, or c reased doc ument may damage the document or caus e a paper ja m.
Chapter 3 Basic Operation 3-8 Note F or more i nf or mat ion on pla cing docum ents, see “Feeding in the P age Separa tion Mode, ” on p. 3 - 5 . 3 Star t s canning.
Chapter 3 Basic Operation 3-9 3-4 Job Func tion In add ition to using scanning app lication s, such as Capture P erfect 3.0 to perform s canning, the DR- 6010C is equipped wi th the Job Func tion. The Job F unction enables you to sc an simply b y touchi ng a job button o n the sca nner .
Chapter 3 Basic Operation 3-10 Job Registration T ool The J ob Regist r ation T oo l is a TW A IN-comp atible applicati on that is in stalled with the ISI S/TW AIN dr iver , an d launche s from the Programs menu. Use the Job Re gistration T ool to program functions in the job b uttons.
Chapter 3 Basic Operation 3-11 Scanning With the Job Function T o scan using th e job func tion, use the f o llowing proc edure. 1 Place th e documen ts into the feed tra y . (See “ 3-3 Placi ng Documents, ” on p. 3-5.) 2 Press the job button c to star t the j ob .
Chapter 3 Basic Operation 3-12 About Launcher T o use the Launc her feature, it is necess ary to fir st change the Win dows e vent settings as desc ribed below , and s pecify a n applicati on f or eac h job button. Note • By def au lt, all ap plications suppor ti ng the ev ent function are enabled.
Chapter 3 Basic Operation 3-13 2. Click [Hardware and Sound]. Note Under Wi ndows XP , cl ick [Printer s and Other Hardware]. 3. Click [Scanner s and Cameras].
Chapter 3 Basic Operation 3-14 4. Select [ CANON DR -6010C USB] or [CANON DR- 6010C SCSI] an d click [Proper ties]. The [CANO N DR-6010C US B Proper ties] or [CANON DR- 6010C SCSI P roper ties] window appe ars. 5. Click the [Ev ents] tab. 2 Under [Scan ner ev ents ], select the button who se setting you want to change (Bu tton No .
Chapter 3 Basic Operation 3-15 3 By default, all appl ications li sted under [S end to this ap plication] are s elected. Select only o ne applica tion (des elect the check bo xes for all othe r appli cations.) The n click [Apply ]. IMPOR T ANT If the [Disa b le device ev en ts] check box is selected, the Job F unction can not be used.
Chapter 3 Basic Operation 3-16 3-5 Cap tureP erfect 3.0 This section de scr ibes the flow of the Captur eP erfect 3.0 app licatio n. For more informati on on C aptureP erfect 3.0, see the Captu reP erfect 3.0 Opera tion Guide a nd the Captu reP erfect 3.
Chapter 3 Basic Operation 3-17 Scan Job The s canning con ditions and scan mod e (Scan Batch to File, Scan Batc h to Pr int, or Sc an Batch to Ma il) are regi stered in a dvance as a jo b . The scan jo b can then be perfor med by selectin g the register ed job from the drop- down list ( a ) or by pre ssing (S can Job) o n the to olbar ( b ).
Chapter 3 Basic Operation 3-18 Using CaptureP erfect 3.0 This section de scr ibes how to st ar t up Cap tureP erf e ct 3.0, select the scan ner , and s can docume nts. The Sca n Batch to Fil e function is used he re as an example. For details, see th e CapturePerf ect 3.
Chapter 3 Basic Operation 3-19 2. Select [ Canon DR-60 10C] Æ clic k [OK]. Note If [Canon DR- 6010C] is not display ed in the l ist of sca nners, re-install the ISIS/TWA IN dr iver . (See “2- 3 Installing the Software, ” on p. 2-4.) 3. Set the Default Page Size and click [OK ].
Chapter 3 Basic Operation 3-20 4 Set the sc an settings. F or mor e informat ion on sc an settin gs, see Chapte r 7, “ISIS/ TW AIN Dr iver Settings. ” 5 Place your doc ument. (See “3 -3 P lacing Docu ments, ” on p . 3 -5.) 6 On the [S can] menu, s elect [Scan Batch to File].
Chapter 3 Basic Operation 3-21 8 When t here are no more page s of the do cument to scan, sc anning st ops. Scanning resume s or ends according to the Feeding O ption set ting in the scanner setu p . • F eedin g Option is set to “ Standard Feeding”: The Conti nue dialog box is display ed.
Chapter 3 Basic Operation 3-22 Scan P anel Functions The S can P a nel has the following functi ons. a Start button If F e eding Op tion is set to “P a nel-Feeding, ” clicking th is button star ts scanning.
Chapter 3 Basic Operation 3-23 3-6 Using P atchc ode Sheets The DR-60 10C ISI S driver and Cap tureP er f e ct 3.0 both suppor t the aut omatic file separation functi on with patchc ode sheets. P atchcode patter ns are pr inte d on patchc ode shee ts, which are us ed to auto matically separate fil es.
Chapter 3 Basic Operation 3-24 P a tchcode P attern Function There ar e two type s of patchc odes and their functi on change s acco rding to t heir patter n. ■ P A TCH T (FILE A) P A TCH II (FILE B) How to Use P atchc ode Sheets 1 Pri nt patchcode shee ts on a printer .
Chapter 3 Basic Operation 3-25 3 On the [Othe r] tab of th e ISIS dr iver proper ties, set th e batch sepa ration setting to “P atc hcode. ” 4 F rom t he applic ation, perfor m scanning with batch s eparation e nabled.
Chapter 3 Basic Operation 3-26 3-7 Cl earin g a P aper J am When pa per jams o ccur dur ing sca nning, use the f ollowing pro cedure to c lear them. CA UTION When removing jamme d paper , take care not t o cut your hands on the edges of the paper . 1 Remov e any documents that have been left in the eject tray , and close the ej ect tra y guide.
Chapter 3 Basic Operation 3-27 3 Remov e the jammed docum ent. ■ If the jam occurred in the feed section ■ If the jam occurred in the eject section IMPOR T ANT Make sure to pull the d ocument out c arefully , witho ut applyi ng too much force.
Chapter 3 Basic Operation 3-28 • If a paper jam occurs w hen “Rapid r ecov e r system” is enabled in th e ISIS/TW A IN driver settin gs, the image data of the d ocument is n ot sav e d and scanni ng stops. This allows you to continue s canning from the doc ument that c aused the pa per jam after the pape r jam is fix ed.
Chapter 3 Basic Operation 3-29 3-8 Other Functions This scanner als o suppor ts the scanni ng functions descr ibed bel ow . • Folio Scan Documen ts larg er than A4 ( up to A3) c an be scanne d by f oldi ng them fir st. • Double Feed Detection Function The s canner wil l detect a dou ble f eed and stop scannin g.
Chapter 3 Basic Operation 3-30 Double Feed De tection Function The s canner is equipped with a [Double Feed Detecti on] functi on that autom atically detects wh en two or mor e pages a re fed at the same time (double feed) while s canning con tinuously .
Chapter 3 Basic Operation 3-31 • When scannin g in the Long Docum ent mode, if the docume nt is place d on the scanner in a ske wed positio n, it may be damage d.
Chapter 3 Basic Operation 3-32 3. Click [Scanner s and Cameras]. Note Under Wi ndows 2000, do ub l e click [Sca nners and Ca meras]. 4. Select [ CANON DR -6010C USB] or [CANON DR- 6010C SCSI] an d click [Proper ties]. The [CANO N DR-6010C US B Proper ties] or [CANON DR- 6010C SCSI P roper ties] window appe ars.
Chapter 3 Basic Operation 3-33 2 Click the [Mai ntenance] tab . 3 Click [Long Do cument mo de (1,000 mm)]. 4 Click [OK] to close [CANON DR-601 0C USB Proper ti es]. 5 T ur n the scanne r OFF and th en ON aga in. IMPOR T ANT • If y ou are using a SCSI conne ction, tur n OFF the computer and then tur n the sc anner OFF and then O N again.
Chapter 3 Basic Operation 3-34 MultiStream Function If the applicatio n that you are usi ng suppor ts the MultiStream function, the n it is p ossible to scan a docume nt once an d simultane ously outpu t two types of images ( Prima r y image and Seco ndar y image .
4-1 Chapter 4 Maintenance 4-1 Regular Maintenanc e Clean the scanner on a regul ar basis a s descr ibed be low to maintai n peak scan ning qual ity . CA UTION ■ When cle aning the scanner , turn OFF the pow er switch and disconnect the po wer cord fr om the power outlet.
Chapter 4 Ma intenance 4-2 Cleani ng the Sensor G lass a nd the Rolle rs If sca nned image s hav e e xtraneou s mark s, or if the sc anned doc uments are d ir ty , the sens or glass or ro llers ins ide the sca nner may be dir t y . Cl ean them pe riodic ally .
Chapter 4 Ma intenance 4-3 3 Use a cl ean dr y cloth to wipe dir t off the sensor glas s. Wipe both the top and bottom sensor gla sses. IMPOR T ANT Scratche s on the s ensor glas s may cause mar ks on the image s and co uld caus e f eeding errors.
Chapter 4 Ma intenance 4-4 6 Wipe the r emoved rollers with a c loth that ha s been mo istened with wa ter and thor oughly wrung out. 7 Attach the rollers that were removed. ( See “ Att achi ng t he Ro ller Uni t, ” on p . 4-10 , and “At tac h in g the Ret ard Roll er , ” on p .
Chapter 4 Ma intenance 4-5 4-2 Remo ving and Attac hing the Roller s T o clea n or replac e the rolle r unit or reta rd roller , remove and then attac h the par ts as des cribe d in each r espective section . IMPOR T ANT F ee d rollers are consu mable par ts.
Chapter 4 Ma intenance 4-6 Resetting the Counter After replacing the f ee d rollers, op en the [Coun ter setup ] dialog box and reset the counte r . 1 Open the [ Event settings ] dialog b o x. 1. Click [Star t] - [Control Panel] to ope n the Control P ane l.
Chapter 4 Ma intenance 4-7 3. Click [Scanner s and Cameras]. Note Under Wi ndows 2000, do ub l e click [Sca nners and Ca meras]. 4. Select [ CANON DR -6010C USB] or [CANON DR- 6010C SCSI] an d click [Proper ties]. The [CANO N DR-6010C US B Proper ties] or [CANON DR- 6010C SCSI P roper ties] window appe ars.
Chapter 4 Ma intenance 4-8 2 Click the [Mai ntenance] tab . 3 Click the [Res et] button, and the n make sure that t he counter for the rol ler being us ed is set to 0.
Chapter 4 Ma intenance 4-9 Remo ving/Attach ing the Roller Unit T o remove or attach the roller uni t, proceed a s f ollows. CA UTION Use cautio n when removing or attaching the r o ller unit. U sing too much for ce may lead to damage or personal injury .
Chapter 4 Ma intenance 4-10 4 Mov e the roller unit to th e right a and then p ull it out b . Att achi ng the R olle r Unit 1 Align the cutout on the roller unit with the s haft pin o n the main unit. Note If the cutou t and pin d o not fit, rota te the rolle r until the p ar ts are proper ly matched.
Chapter 4 Ma intenance 4-11 4 Carefull y lower the upper unit. Final ly , push t he uppe r unit down with bo th hands a t the sides until the unit clicks into p lace. V er ify that th e upper u nit is prop erly c losed. CA UTION When cl osing the upper unit, be careful not to get your fingers caught, as this may result in personal injury .
Chapter 4 Ma intenance 4-12 2 Inser t a finger of ea ch hand i nto the grooves on both end s of the rol ler cover and remove the cover . 3 Mov e the roller l ock le ver down and forward ( a ,) and th en slide it to the r ight ( b .) 4 Shift the r etard rol ler to the r ight to r emov e i t.
Chapter 4 Ma intenance 4-13 2 Slide the roller l ock le ver to t he left, and inser t it into th e retard r oller slo t. 3 Push the roller lo ck le ver towards the back of the scanner to lock the reta rd roller into place. 4 Replace th e roller cover .
Chapter 4 Ma intenance 4-14 6 Close the u pper unit slowly . Make sure tha t the uppe r unit is complete ly closed by pus hing on both edges with both h ands unti l you hear a cl ic k. CA UTION When cl osing the upper unit, be careful not to get your fingers caught, as this may result in personal injury .
5-1 Chapter 5 T r oubleshooting 5-1 T r oubleshooting This sec tion descr ibes the pos sible problems that might occur during us e of the scanner an d how to solve them. The Scan ner Does Not T ur n ON .. .................... ................... .....
Chapter 5 T roubleshoot ing 5-2 Prob lem The USB hub is not compatible with th e scanner . Solution Remov e the USB hub . ✘ The PC Does Not Recognize the Scanner (Connecting via SCSI) The following are poss ible causes of the PC failing to r ecognize t he scanner .
Chapter 5 T roubleshoot ing 5-3 IMPOR T ANT • If documen ts are not scanned nor mally e ven if the scanner setup is OK, a p robable cause is that the sc anner dr iver or appli cation s oftware is not r unnin g correct ly . Re- install the scanner driver or app licatio n software.
Chapter 5 T roubleshoot ing 5-4 Pr oblem Attempting to scan a document of a size, thic kne ss, or weight t ha t the scanner cannot scan. Solution Check the size, thickness, and weight of the d ocument. For precau tions co ncer ning documents, s ee “3-1 Documents, ” on p .
Chapter 5 T roubleshoot ing 5-5 Symptoms T ext or images on the r ear side of y our document appear in the scanned image . Problem The [B rightne ss] setting is too low , or th e paper i s too thin . Solution Set a hi gher [Br ightnes s] settin g. If the pap er is too th in, make a copy of the docume nts and the n scan the c op y .
Chapter 5 T roubleshoot ing 5-6 5-2 Uninstallin g Software If the IS IS/TW AIN driver , and “C aptureP er f ect 3.0” are no t operating nor ma lly , follow the procedure below to uni nstall them. Then, re-install the s oftware from the DR-6010C setu p disc.
Chapter 5 T roubleshoot ing 5-7 The [Unin stall or c hange a pr ogram] dialog box appea rs. Note F or Windows XP , the [Add or Remov e Programs] dia log box appears. 3 F rom t he list in th e dialog bo x, select th e applic ation you want to delete Æ click [Uninstal l].
Chapter 5 T roubleshoot ing 5-8 The unin stall pr ocedure i s carri ed out. 3 After uni nstall is complete, click th e [Finish] b utton to exit the u ninstall er . Uninstalling the Job Registration T oo l 1 F rom t he Programs list in the dialog box, select [DR-6010C Job T ool] and cli ck [Uninstall].
Chapter 5 T roubleshoot ing 5-9 2 The confir m file dele tion screen ap pears. Click the [Y es] button. Note Under Wi ndows XP , the [Add/Remove Programs] dialo g bo x appea rs. 3 Click the [Y es] button. The uninstall p rocedure is carri ed out. 4 After uni nstall is complete, click th e [Finish] b utton to exit the u ninstall er .
Chapter 5 T roubleshoot ing 5-10 Uninstalling CaptureP erfect 3.0 1 Select [C aptureP erfect 3.0] from the list in the dia log box Æ click the [Uninstall] button. 2 The file delete c onfir mation scr een appear s. Click the [Y es] button. Uninstal lation st ar ts.
Chapter 5 T roubleshoot ing 5-11 3 After uni nstallatio n is comple te, click the [Finish] button to ex it the un installer ..
6-1 Chapter 6 Appendix 6-1 Sp ecific ations Specifications T ype Desktop sheetf ed s canner Scanning Document Specific ations Width: Length: 2.08" to 8.
Chapter 6 A ppendix 6-2 • The fun ctions d escribed abov e can be used if t hey are suppo r ted by the appli cation soft ware. • Some fun ctions ma y not be available , dependi ng on the p erf or mance of your PC and on your softw are.
Chapter 6 A ppendix 6-3 Ex tern al D imen sion s 21.4" (544 mm) (Document Feed T ra y Ex tension is open) 12.5" (318 mm) 8.9" ( 225 mm ) 19.3" (4 91 mm) (Document Feed T ra y is open) 5.2" (131 mm) 10.9" (278 mm) 7.3" (185.
Index 6-4 Inde x B batch separation ............................................ ................ 3-23 Bypass M ode ..................................................... .............. 3-7 C CapturePer fect 3.0 ...... ........... ........ .... ..... .
User Manual Softwa re.
Contents ii Contents Chapter7 ISIS/TWAIN Driver Set tings ...... ................... ................... ............. ............. 7-1 7-1 Before Use .................... ................... ................... .................... .................
7-1 Chapter 7 ISIS/TW AIN Driver Settings This ch apter des cribe s the dialog box es of the ISIS a nd TW AIN drivers. Please read this chapter and the IS IS/TW A IN driver’ s Hel p bef ore ma king dr iver settings. 7-1 Bef ore Use This sc anner can scan doc uments rangin g in size from business car ds and c hecks to A4 size docu ments.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-2 2 On the [S can] menu, click [Select S canner]. 3 Select [C anon DR-60 10C] Æ click the [O K] button. Note If [Canon DR- 6010C] is not displayed in the list o f scanners, re-in stall the ISI S/TW AIN dr iver .
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-3 7-2 ISIS/TW AIN Driver Pr oper ties Dialog Bo x The IS IS/TW AIN dr iver proper ties d ialog box consis ts of four tabs: Basic, Br igh tness, Image proce ssing and Oth ers. See the des cript ion of eac h tab sheet for detail s .
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-4 Basic T ab Sheet This [Basic] ta b sheet is di splay ed when the dr iver is call ed dire ctly and not from anoth er settings dialog bo x.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-5 ☞ Refer to the descr iptions of t he f ollowing functio n for details about “ Skip Blank Page, ” “Auto Color Detect ion, ” “ Detect Page Size, ” “T ext Enhanced E nhanceme nt Mode” a nd “Margi n.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-6 ☞ Documents with low-contrast te xt can be made more r eadable by adjusting Contrast on t he [Br ightness] ta b sheet. ☞ If the background i s non-unifor m, such a patter n, the ba ckgr ound r emains vis ible in the image, and text ma y be hard to read.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-7 Mode-Dependent F unction Limit ations The following tab she et functio ns are par tially disabled accordi ng to the s elected mod e. Ref er to “[Br ightne ss] T ab Shee t, ” on p. 7-13 f o r the [Brightn ess] tab sheet set tings.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-8 Dots per inch Selec t the scanni ng resoluti on. ☞ Higher res olutions p rovide clear er image s, b ut produce larger fi les. ☞ When the selected resolu tion is 300 d pi or le ss, the [Moire Reduction ] setting i s enabled to allow reducti on of Moir e patter ns in scan ned image s.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-9 [Folio] Docume nts that ar e nor mally folded in half are sc anned on b oth sides a nd compos ed into on e image . (See “F olio Scan , ” on p . 3- 29. ) ☞ [F o lio] is not displayed if [P atch code] is s elected as the Batch Separation setting o n the [Other s] tab sheet .
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-10 [Speed Pr iority ] This mode gives pri ority t o scanning speed, and generates 400 or 600 dpi images fr om images scann ed at 300 dp i. Althou gh scann ing speed is fast, image q uality is sli ghtly r educed.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-11 ☞ Changing these set tings is not nor mally nec essar y . Change them only if you w an t a docume nt of light co lors to be judged to be a black-and-white document. ☞ Select [24-bit Co lor] if col or document s are ju dged to be blac k -and-white documents wi th the default settings.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-12 Scan A rea Dial og Bo x (TW AIN Dr iver) This dialog box appears wi th applicat ion programs th at display the [Sca n] button in the P roper ties dial og bo x.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-13 ☞ When [Des ke w] i s enabled on the [Basic] ta b sheet, the specified area may be displ aced when scanning. Area Window The s ize indicated f o r the Area w indow corresp onds to th e page si ze setting, and th e area wi thin the panel i ndicates th e current s canning ar ea.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-14 The availability of br ightness an d contrast settings are as follows accordi ng to the mo de settin g on the [ Basic] tab she et.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-15 [Gamma Setting s] Dialog Box Use the [Gamma S ettings] dial og box to adjust the gamma c orrection value.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-16 ☞ Y ou ca n also move the gamm a cur ve b y dragging i t with the m ouse. [Fre ehand] The ou tput value for a par ticular i nput value in the ga mma table can b e specified with the mo use. ☞ Click any point in the Gamma Cur v e Graph to s et that poi nt as an output v alue.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-17 [Image processi ng] T ab Sheet The [Im age proces sing] tab sheet pr ovides setting s affecting process ing of sc anned ima ges. Some settin gs may be disabled de pending on the mode s ettings on th e [Basic ] tab she et.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-18 [T ext Orient ation Recognit i on] Ch eck Bo x Selec t this ch eck bo x to d etect text or ientation in scan ned images, an d rotate ima ges in 90º increme nts as ne eded to nor ma lize orie ntation.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-19 ☞ The co lor range with in the sha ded (cros s-hatched ) area is dr opped out o r enhanced. ☞ Y ou ca n mov e the sha ded area b y dragging with the mouse. ☞ Y ou ca n change t he speci fied color range by dragging the edges of the s haded ar ea.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-20 [Other s] T a b Sheet (T W AIN driver) [Reve rse si de] Scann ing occu rs as follows dependi ng on the s canning side se ttings. ☞ When thi s check box is select ed and th e scanning s ide is se t to [Simpl e x] , only the back of each page is scanned.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-21 Double Feed Detect ion This function st ops docu ment transp or t when d ouble f eeding of d ocument p ages is detected, a nd provides s election of the dete ction meth od to suit the document s to be scanned.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-22 With the [Standar d Feeding] Feeding Option With the [A utomatic Feeding] or [P anel Feeding] Feeding Option [A uto] Each b atch of do cument s is saved with different file names. [P anel] Docume nt batches are se parated when the [Batch Se paration] button o n the Sca n P a nel is pre ssed.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-23 [Barcode s] Button This is enabled wh en the optio nal barcod e module i s install ed: click it to o pen the Ba rcode di alog box and make settings aff ecting b arcode detec tion in doc uments. F or deta ils, see the ISIS /TW AIN dr iver Help , or contact y o ur supp lier .
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-24 Addon Dialog Bo x The [A ddon] dialog bo x provides acc ess to the following dialo g bo x es, where you can m ak e settin g for adding text or bit map image s to sca nned docu ment image s.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-25 [Addon] Chec k Bo x Selec t this ch eck bo x to apply te xt or bitmap images t o scanne d documen t image s. Imprinter Side Selec t the side on which to appl y your text or images. [Enable] Chec k Box Selec t this ch eck bo x to enable the app licatio n of add-o n te xt.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-26 [Down arrow] abbre v iation: <D> Inser ts a down arrow ( ) symbol. [Left arrow] abbreviation: <L > Inserts a left arro w ( ) symbol. [Right arr ow] abbre v iation: <R > Inser ts a right ar row ( ) symbol.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-27 ☞ When add -on text is applie d to an ima ge, the size of the characters dep ends o n the scan resolut ion. [Enable] Chec k Box Selec t this ch eck bo x to enable appli cation o f bitmap im ages to s canned imag es.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-28 [Horizontal Off set] Enter the desired offset from t he edge of t he docume nt f eeder i nlet. ☞ When app lying an add-on to the front si de, enter the o ffset from the left side of the feeder inlet.
Chap ter 7 I SIS/TW AIN Driv er Set tings 7-29 Sta r t V al ue Enter the star t value for the coun ter . Increment This is the coun ter incre ment value. The counte r increme nts by the value entere d here. Increment T rigger Speci fies the t ype of ev en t that tr iggers a counter increment.
8-1 Chapter 8 Job Re gistration T ool Se ttings This ch apter des cribe s Job Reg istration T ool settings f o r job funct ions. Ref er to S ection “3-4 Job Funct ion, ” on p.
Chapter 8 J ob Registratio n T ool Sett ings 8-2 8-2 Job Regist ration T ool Settings Dialog Bo x The J ob Registratio n T ool Sett ings dialog bo x provides acces s to the [N e w /Editing ] dialog box and the [ Admin] dialo g bo x, and t he New/Edit dialog b ox pro v ides acc ess to funct ion setting d ialog bo xe s.
Chapter 8 J ob Registratio n T ool Sett ings 8-3 Job Registration T ool Dialog Box This dialog box appears wh en the Job Registration T ool is star te d from the Programs menu. Job Button Setti ngs List The di splay ed job buttons cor respond to th ose on the scanner, showing their cu rrently a ssigned settin gs.
Chapter 8 J ob Registratio n T ool Sett ings 8-4 [New/Editing] Dialog Bo x The [New/Edit ing] dialo g bo x appears when you click a Job button in the Job Regi stration T ool di alog bo x. The [New/Edi ting] dialog bo x appears as follows depending on the func tion setting s registe red to the Job b uttons .
Chapter 8 J ob Registratio n T ool Sett ings 8-5 Job title Enter the job tit le to be disp la yed in the Jo b Button Setti ngs list. ☞ Job titl es may consist of up to 29 al phanumer ic charact ers. Function Select th e function to register to this job.
Chapter 8 J ob Registratio n T ool Sett ings 8-6 Save in f older When the [Sav e to Pictu res f older] check box is not se lected, thi s is enabled for y ou to enter a f older name in which to save scanned images. Y o u can also s elect a folder by clicking the [Browse] button.
Chapter 8 J ob Registratio n T ool Sett ings 8-7 PDF Settings Dialog Bo x Compression ra te Selec t the compre ssion rate for PDF files. • Select [No rm al] to sav e with stand ard compr ession. • Selec t [High Comp ression] t o sav e fi les with high com pression.
Chapter 8 J ob Registratio n T ool Sett ings 8-8 Setting to Print Scanned Ima g es (Functi on: Print) [Printer] Shows th e printe r to use f or prin ting imag es. Click the [Pri nter sett ing] button to ch ange pr inter settings . [Print f ormat] Selec t whether to r esize images f o r prin ting.
Chapter 8 J ob Registratio n T ool Sett ings 8-9 Settings f or Monitoring the Folder for Saved Images [Capacity W arning Settings] The Capa city W ar ning Sett ings allow you to specify in advance the folder for sa v ing image files, and the spa ce to be available f o r saving files.
Chapter 8 J ob Registratio n T ool Sett ings 8-10 ☞ The maximum size of attached fil es must not exceed the limi t deter mined by the mail s er v er. Ask your e-mail sy stem admini strator for the attachmen t size limit of the mail ser ver . [Back Up / Restore] Settings [Back Up] Butt on Wr ites a backup fi le (*.
9-1 Chapter 9 Practical Examples This chapte r provides examples of setti ngs for the DR-6010C ISIS /TW AIN dr iver . Refer to the se examples when makin g ISIS/TW AIN driver setting s. F or descr iptio ns of par ticula r setting item s, see “ISIS/ TW AIN Dr iver Settings, ” on p.
Chapte r 9 Practical Exam ples 9-2 • T o sca n long -pag e doc um ent s Set the scanning m ode to L ong Document m ode, and se lect [Auto-detecti on] as the [P age S ize] in the Pr oper tie s dialog box. Docum ent pages may be up to one meter long. (See “Long Docum ent Mode, ” on p.
Chapte r 9 Practical Exam ples 9-3 • T o av oid losing the edges of an image due to shifting of the document pa g e, or to remove black frames from around images Adjust th e scan are a using the [M argin] sli der in the S can Area d ialog box. If the edges a re missing from the image, move the slider to the right to e xpand the s canning are a.
Chapte r 9 Practical Exam ples 9-4 • T o scan a batch of documents on e page at a time Set the [F e eding Option ] to either [Automatic Feeding] or [Panel Feeding], and sca n each pa ge. After sc anning ea ch page, the s canner re turn s to the waiting state.
Chapte r 9 Practical Exam ples 9-5 Scanned im ages are r otated as follows accordi ng to the orien tation of loaded docu ments and the selected angle. • T o rota te images to matc h document te xt Select [T ext Ori entation Rec ognition ] on the [Image p rocessin g] tab sheet.
Chapte r 9 Practical Exam ples 9-6 • T o skip or enhance a custom color Select [Dro p-out color Custom] o r [Custom co lor Enh ance] in the [ Color drop- out] list on the [Image pro cessing] tab s heet to ope n the [Colo r Settings] dialog box. Here you can spec ify the range of color s to be dro pped out or enhance d.
Chapte r 9 Practical Exam ples 9-7 Prescan • T o confirm images before scanning Select th e [Prescan] c heck bo x on the [Other s] tab shee t, and scan. W hen scanni ng is firs t star ted , the firs t documen t page is prescanne d and dis pla yed in the Pres can pane l.
PUB. CE-IE -727 © CANON EL ECTRONICS INC. 20 09 CANON ELECTRONICS INC. 1248, S HIMOKAGEMO RI, CHICHIBU-S HI, SAITAMA 3 69-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 110 42, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONT ARIO L5T 1P7, CANADA CANON EUROPA N.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Canon IMAGE FORMULA DR-6010C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Canon IMAGE FORMULA DR-6010C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Canon IMAGE FORMULA DR-6010C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Canon IMAGE FORMULA DR-6010C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Canon IMAGE FORMULA DR-6010C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Canon IMAGE FORMULA DR-6010C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Canon IMAGE FORMULA DR-6010C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Canon IMAGE FORMULA DR-6010C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
