Manuale d’uso / di manutenzione del prodotto ANS-24RV del fabbricante Advantek Networks
Vai alla pagina of 28
24 Port Fast Ethernet Switch with VLAN and Trunking User Manual Model # ANS-24RV.
2 FCC Warning This equipment has been tested and found to comply with the limits for a Class A dig ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 Contents 1 Introduction ....................................................................................................... 5 1.1 General Description .................................................................................... ..5 1.2 Product Features.
4 2.8.2 Cla ss of Service Configuration ........................................................... 21 2.9 MAC Ad dress .............................................................................................. 22 2.9.1 MAC Address Configuration .
5 1 . I n t r o d u c t i o n 1.1 General Description The device is a powerful, h igh-performance Fast Ethernet swit ch, with all 24 ports capable of 10 or 100Mbps auto-n egotiation operation (Nway) which means the switch co uld automatically negotiate with the connected partn ers on the net work speed and duplex mo de.
6 -- Eight Screws *If any of the items is damaged or missing, please contact your retai ler immediately. 1.4 Front panel LED indicators After installing the switch, you can check its st atus from the LED indicators on the front panel shown be low.
7 cable. When using the uplink po rt, you can extend the distance to 100m for linking anothe r switch or hub. 1.9 To prolong the operational life of your units *Never stac k units more than eight hig .
8 2. Installing the Fast Ethernet Switch 2.1 Configure system network The switching hub offers a Web ba sed management software to manag e and monitor the switching hub. Before ru nning the management so ftware, you have to configure your system network setup.
9 Step 3: Select “ Use the following IP address ”, and enter “ IP address ”, “ Subnet mask ”, and “ Default gate way ” fields, and then click “ OK ”. 2.2 Login the Web Step 1: Enter IP address Æ http://192.168.2.1 in the web browser URL field.
10 2.3 The SmartSwitch Home overview The window below shows the Home p age of SmartSwitch: Administrator Æ 1 ) Authentication Configuration 2) System IP configuration.
11 3) System status 4) Load Default Setting 5) Firmware update Port Management Æ 1) Port Configurati on 2) Port Mirroring 3) Bandwidth Control 4) Broadcast Storm Control VLAN Setting Æ 1) Group VLAN.
12 2.4.2 System IP Configuration In this page, you can set and update the IP Address, Subnet Mask, and Gateway setting. After filling up the dat a t hat you want to change, click “ Up date ” to process the dat a changed immediately . 2.4.3 System Status Click on “ System S tatus ” to present the current system statu s on this screen.
13 2.4.4 Load Default Setting This option help s you to reset the devic e back to the default setting from the factory . Be aware that the entire configurati on will be reset, the IP address of the device will be set to default setting 192.168.2.1. Just simply click “ Load ” to reset the default setting.
14 2.4.5 Firmware update Before updating the firmware, you sho uld check whether your mana gement station provides TFTP server and DHCP server . If these 2 services exit on your manag ement station, y.
15 This program can be downloaded from t he web site. http://tf tpd32.jounin.net/ .Y ou don’t need to install this program. T o run TFTPD32 just launch the execut able file tftpd32.exe. Th e configuration procedur e for DHCP/BootP server is illust rated as the following figures.
16 (5) Press the “ Up date ” button which is shown on the W eb page. After you press the “ up date ” button, the TFTP procedure st arts and the program shows the throughput of the dat a transfer as s hown below . If no throughput can be seen on this program, there may be something wrong with your settings.
17 2.5.2 Port Mirroring Port Mirroring is a method of monitoring network traffic that fo rward s a copy of each incoming and/or outgoing p acket from one port of a network switch to another port where the packet can be studi ed. It enables the manager to keep Close track of switch perfo rmance and alter it if necessary .
18 TX (T ransmit) Rate : to duplicate the rate of data transmit from the sou rce port and forward to the sniffer port. RX (Receive) Rate: to duplicate the rat e of data that send to the source and forward to the sniffer po rt 2.5.4 Broadcast Storm Control Y ou can enable Broadcast S torm Control to configure the advanced switch function.
19 2.6 VLAN Setting 2.6.1 Group VLAN Setting This page allows use r to define Virtual LAN (V LAN) membership by group of device’ s ports. Any individual port can be a member of a VLAN group. A VLAN group is basically a broadcast domain, but any port is not limited to belong to only one VLAN group.
20 2.7 Trunk Setting 2.7.1 Trunk Configuration Port trunk setting. The trunk hash algorithm can select “ Port ID ”, “ Source address ”, “ Destination address ” or “ SD &DA ”.
21 2.8 QoS Setting In some port s that need to have a high priority to manage the dat a transfer , QoS should be changed. Set the port’ s QoS to high to determine the port will alway s transfer their data first.
22 Default: All ports in T OS priority recognition disabled. VLAN tagging base (T CI) priority recognition: Maki ng a check mark in front of port ID indicates this port is T CI priority enabled. Default: All ports in TCI pri ority recognition disabled.
23 2.10 Configuration 2.10.1 Configuration Backup/Re covery This function allows you to backup or re covery the latest switch settings. Just simply enter your password and cli ck “ Up date ” button.
24 3. Console User Interface 3.1 Connecting to the Switch Console Port User can configure the switch syste m vi a terminal emulation program through RS-232 port with baud rate 19200-8-n-1. The RS-232 con ne ctor is on the back panel of the switching hub; make sure you connect the other end of se rial port to COM1 of PC.
25 S tep 2: The Connection windows will appea r . Enter terminal “ Name ”, select correct icon, and then click “ Ok ” button. S tep 3: Select “ COM1 ” in the “ Connect using ” field and then click “ OK ”.
26 S tep 4: Select “ 19200 ” in Bits per second field and cli ck “ Apply ” & “ OK ” buttons to s ave the settings. S tep 5: Reset or pull out the switch power . And then the HyperT erminal screen will appear . W ait for a while for system checking and then press “ s ” to enter the console.
27 3.3 Configure Switching Hub via COM1 Port 3.3.1 Switch Main Menu After you enter the Modular Con sole, the Switch Main Menu will appear . 3.3.2 Load Default Setting This page allows user to restore default port settings.
28 In the 1 st option to 3 rd option ( 1. Restore switch default setting / 2. Restore IP default Setting / 3. Restore Login defa ult Setting ), just simply press number to restore the default settings.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Advantek Networks ANS-24RV è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Advantek Networks ANS-24RV - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Advantek Networks ANS-24RV imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Advantek Networks ANS-24RV ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Advantek Networks ANS-24RV, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Advantek Networks ANS-24RV.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Advantek Networks ANS-24RV. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Advantek Networks ANS-24RV insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.