Manuale d’uso / di manutenzione del prodotto BJC-5100 del fabbricante Canon
Vai alla pagina of 110
BJC-5100 USER MANUAL Canon.
ii Copyright This manual is co pyrig hted by Canon Comput er S ystems, Inc. (CCSI) with all r ights reser ved. U nder the c opyright laws, this manual may not be repr oduced in an y form, in whole or par t, w ithout the prior w ritten consent of CCSI.
iii Using Y our Documentation The following documentation is supplied with the Canon BJC-5100 Series Color Bubble J et™ Printer t o help you efficiently use y our new printer . Quick Start Guide This booklet describes the steps you follo w to unpack and set up y our printer and install the BJC-5100 Series Printer Driver for W indo ws ® .
iv Distinctiv e ty pefaces identify the printer buttons y ou press, the lights on the operator panel, and any c ommands you ent er at y our comput er . ❍ The buttons y ou press appear in this typeface: POWER button. ❍ The lights on your printer appear in this ty peface: POWER/ERROR light.
v 1 Introduction ...................................................................................................... 1-1 Supplies and A cc essories .................................................................................... 1-2 BJ Cart ridges and BJ T anks .
vi 4 Maintaining the Printer ................................................................................ 4-1 Printer G uidelines .............................................................................................. 4-1 Cleaning the Printer .
Chapter 1 Introduction 1-1 Introduction Congratulations on your purc hase of the Canon BJC-5100 Series Color Bubble J et™ Printer . W e appreciate y ou choosing this printer to meet your printing needs.
1-2 Introduction Chapter 1 Supplies and Accessories Y our BJC-5100 Series printer suppor ts ex cellent and unique print media options that will allow you t o produc e dazzling, pr ofessional, and fun presentations.
Chapter 1 Introduction 1-3 Introduction N Canon has more engineers dedicated to cr eating quality ink for providing the best results for output fr om Bubble J et printers than any other organization. Canon does not prohibit the use of third-part y inks, and the use of third-part y inks does not invalidat e the product ’ s limited warrant y .
1-4 Introduction Chapter 1 Canon Customer Care Center Canon Computer S ystems, Inc. offers a full range of customer technical support* options including: ❍ 24-hour , 7-da y-a-week, toll-free aut oma.
Chapter 1 Introduction 1-5 Introduction Servicing the Printer The Canon BJC-5100 Series Color Bubble J et Printer is designed with the latest tec hnology to provide trouble-free operation. The W arr anty Card that c omes with the pr inter describes Canon ’ s limited warr anty for your Bubble J et printer .
1-6 Introduction Chapter 1 ❍ Do not use the printer near water . If you spill liquid on or into the printer , unplug it immediately and call the C ustomer Car e Center (see page 1-4). ❍ Slots and openings in the printer and on the back or bottom are pro vided for ventilation.
Chapter 1 Introduction 1-7 ❍ U nplug the printer fr om the wall outlet and call the C ustomer Car e Center (see page 1-4) if any of the following conditions exist: • The powe r cor d or plug is damaged or fray ed. • Liquid is spilled into the printer , or if the printer is exposed to rain or water .
1-8 Introduction Chapter 1.
Chapter 2 Using the Printer With Windows 2-1 Y ou can use the BJC-5100 Series printer w ith all your W indo ws 98, W indo ws 95, and W indo ws NT 4.0 software applications. This chapter describes ho w to use the printer with your W indo ws applications.
2-2 Using the Printer With Windows Chapter 2 Printing a Document This proc edure describes the general steps requir ed for printing from various W indo ws applications. The exact steps for printing a document may vary depending on the application program you are using.
Chapter 2 Using the Printer With Windows 2-3 Using the Printer Driver in Windows Y ou use the printer driver to define the type of printing you plan to do .
2-4 Using the Printer With Windows Chapter 2 BJC-5100/V000/02-99 N For detailed information on an y of the printing options, y ou can use the W indo ws on-line Help in the follo wing ways: ❍ U se the right mouse button to click an item on the scr een; then click the W hat’ s This? command.
Chapter 2 Using the Printer With Windows 2-5 Using the Printer With Windows Custom Settings If you click the C ustomiz e button on the Settings tab , you see another dialog bo x, called Cust om Settings, on which you can specify additional color settings.
2-6 Using the Printer With Windows Chapter 2 The T roubleshooting T ab The selections on this tab help you analyz e common printing problems and rec ommend correcti ve actions. This tab also includes the A bout button, which displa ys version and c opyright infor mation about the dev ice.
Chapter 2 Using the Printer With Windows 2-7 Using the Printer With Windows The Maintenance T ab The selections on this tab allows y ou to perform r outine Maint enance tasks to k eep your printer operating at optimum efficiency . See the information star ting on page 4-4 for complet e details on using these proc edures.
2-8 Using the Printer With Windows Chapter 2 The Windows 98 and Windows 95 T abs Y ou see the tabs described here when you open the Canon BJC-5100 Pr operties dialog box fr om the Printers folder . Y ou also see the Settings, T roubleshooting, and Maint enance tabs described previously .
Chapter 2 Using the Printer With Windows 2-9 Using the Printer With Windows The Details T ab This tab allows y ou to specify printer port settings, spool setting s, and time-out settings. ( Y ou see this tab when you open the Pr operties dialog bo x from the P rinters folder , not from within a W indo ws application.
2-10 Using the Printer With Windows Chapter 2 The Color Management T ab This tab allows y ou to add and r emov e pr ofile associations for your printer . (Y ou see this tab when you open the Pr operties dialog box fr om the Printers folder , not from within a W indo ws application.
Chapter 2 Using the Printer With Windows 2-11 Using the Printer With Windows The Windows NT 4.0 T abs Y ou see the tabs described here when you open the Canon BJC-5100 Pr operties dialog box fr om the Printers folder . Y ou also see the T roubleshooting and Maintenanc e tabs described previously .
2-12 Using the Printer With Windows Chapter 2 The P orts Tab This tab allows y ou to select the port to which y ou want to print documents. Y ou can also enable or disable bidirectional support and printer pooling. (Y ou see this tab when you open the Pr operties dialog bo x from the P rinters folder , not from within a W indo ws applications.
Chapter 2 Using the Printer With Windows 2-13 Using the Printer With Windows The Scheduling T ab This tab allows y ou to specify the sc heduling features of your printer . (Y ou see this tab when you open the Pr operties dialog box fr om the Printers folder , not from within a W indo ws applications.
2-14 Using the Printer With Windows Chapter 2 The Sharing T ab This tab allows y ou to mak e y our printer available t o network users. (Y ou see this tab when you open the Pr operties dialog box fr om the Printers folder , not from within a W indo ws applications.
Chapter 2 Using the Printer With Windows 2-15 Using the Printer With Windows The Security T ab This tab allows y ou to specify security features for your printer . (Y ou see this tab when you open the P roperties dialog bo x from the P rinters folder , not from within a W indows applications.
2-16 Using the Printer With Windows Chapter 2 Specifying Y our Printing Options on the Windows T abs Be sure to use y our on-line help t o find out about the settings available for each printing option. ❍ T o mov e between the W indo ws tabs, click on any of the tabs.
Chapter 2 Using the Printer With Windows 2-17 Using the Printer With Windows W ays to Improve Print Speed in Windows T o impro ve printing speed, you can tr y the following: ❍ Set the parallel port to ECP T o achieve the optimum performanc e from y our printer , the par allel port must be set to ECP .
2-18 Using the Printer With Windows Chapter 2.
Chapter 3 P aper Handling 3-1 Paper Handling This chapter describes ho w to use the printer for all y our printing operations. It includes: ❍ Selecting paper ❍ Summary of printer settings for vari.
3-2 P aper Handling Chapter 3 High Gloss Photo Film The Canon High Gloss Photo Film features a bright white finish that lends striking v isual power t o charts, g raphs, and photographic images. U se this film t o make y our presentation mat erials and gr aphics look professional.
Chapter 3 P aper Handling 3-3 Paper Handling High Resolution P aper The Canon High R esolution P aper is designed to produc e photo-r ealistic quality output w ith sharp and v ivid g raphics.
3-4 P aper Handling Chapter 3 Transparencies T r ansparencies fr om Canon are r ecommended. These transparencies produc e ex cellent c ontrast, shar pness, and color . Assorted P aper Starter Kit If you w ould like t o tr y some of the papers descr ibed above, look for Canon ’ s Starter Kit.
Chapter 3 P aper Handling 3-5 Paper Handling P aper Sizes The BJC-5100 Series printer suppor ts these page sizes: P aper Size Measurements Feed Method Letter 8.
3-6 P aper Handling Chapter 3 Media T ypes The BJC-5100 Series printer suppor ts these media ty pes: P aper Feed Media Method Limit (Sheets) Plain P aper A ut o Appr o x.
Chapter 3 P aper Handling 3-7 Paper Handling Loading P aper Y ou can stack paper in the sheet feeder to load it auto matically , or you can manually feed one sheet at a time through the manual feed slot on the back of the pr inter . Y ou can place appr o ximately 130 sheets of plain paper (20 lb or 64 g /m 2 ) in the sheet feeder at a time.
❍ For best r esults, fan the paper before loading it. ❍ Alwa ys fan a stack of paper along the edge that w ill feed into the printer first. ❍ Align the edge of the paper with the rig ht edge of the sheet feeder and secure the stack with the paper guide.
Chapter 3 P aper Handling 3-9 Paper Handling Auto Feed Guidelines W hen automatically feeding stacks of paper , follo w these guidelines: ❍ Do not open the front c ov er while printing. ❍ Do not leav e paper stack ed in the printer for long periods of time; longer sheets of paper may become bent or curled o ver time.
3-10 P aper Handling Chapter 3 Manually Feeding P aper Y ou use the manual feed function when printing on heavier -weight print media (17 lb to 146 lb , 64 g/ m 2 to 550 g/ m 2 , or paper thickness up to 0.8 mm). N Y ou must use manual feed for tabloid (11 × 17 in) paper .
Chapter 3 P aper Handling 3-11 Paper Handling ❍ If you ha ve just turned on the printer , or not used the printer for awhile, the sheet may aut omatically eject. Simply feed the sheet again. ❍ On the Settings tab, click the F eed paper manually box so that a check mark appears.
3-12 P aper Handling Chapter 3 Printing on Envelopes Y ou can stack up to 15 en v elopes in the sheet feeder or you can man ually feed en velopes one at a time. U .S. Commer cial number 10 (COM10) en v elopes and E uropean DL en velopes are r ecommended.
Chapter 3 P aper Handling 3-13 Paper Handling ❍ T o remo ve curling fr om en velopes, hold the edges of the en velopes diagonally and bend gently . ❍ Mak e sure an y curls ar e remo v ed from the flap of each en velope. ❍ Slide a stack of env elopes into the sheet feeder until it stops.
3-14 P aper Handling Chapter 3 ❍ On the Settings tab, select 10 En velope or DL Env elope in the Size bo x. ❍ N ow y ou can start the print oper ation from y our W indo ws application.
Chapter 3 P aper Handling 3-15 Paper Handling ❍ Allow the printed sheets of film, paper , or fabric to dry completely before storing them. P aper type Drying time (approx.
3-16 P aper Handling Chapter 3 Canon’ s High Resolution P aper Canon ’ s High R esolution P aper is designed for high qualit y printing . This paper is specially coated t o produc e delicate c olor output.
Chapter 3 P aper Handling 3-17 Paper Handling ❍ Mak e sure the printer is on. ❍ Open a wor d proc essing program (such as N otepad) and print a blank page. ❍ The printer feeds the cleaning sheet and then ejects it. ❍ U se a cleaning sheet onc e only .
3-18 P aper Handling Chapter 3 ❍ Insert the sheet w ith the cloth side out (to ward y ou) and the open end up (awa y fr om the sheet feeder). ❍ A djust the paper guide to the edge of the fabric sheet.
Chapter 3 P aper Handling 3-19 Paper Handling ❍ In the Settings tab , select Fabric Sheet for the Media and Fabric Size for Size . ❍ N ow y ou can start the print oper ation from y our W indo ws application. ❍ Let the printed fabric sheet set for about one hour to allow the ink t o complet ely dr y .
3-20 P aper Handling Chapter 3 Printing on Banner P aper Y ou load banner paper through the manual feed slot on the back of the printer . For best r esults, use Canon Banner P aper . T o set up a print job on banner paper , y ou must decide on the number of sheets you need.
Chapter 3 P aper Handling 3-21 Paper Handling ❍ The maximum length y ou can use is six sheets (66 inches or 1676 mm). ❍ Alwa ys leav e an extra sheet at the end of the banner—just in case the ty pe or gr aphics runs over at the end of the banner .
3-22 P aper Handling Chapter 3 ❍ Clear space in front of the paper output slot of the printer for at least one sheet. Make sure the paper exit area is clear .
Chapter 3 P aper Handling 3-23 Paper Handling ❍ In the Settings tab , select Letter Banner for the Size . ❍ Mak e sure the F eed paper manually bo x is check ed. ❍ N ow y ou can start the print oper ation from y our W indo ws application. ❍ Do not allow the paper t o hang ov er the edge of the desk or work table.
3-24 P aper Handling Chapter 3.
Chapter 4 Maintaining the Printer 4-1 Maintaining the Printer This chapter c ov ers the car e required for y our Canon BJC-5100 Series Color Bubble J et Printer .
4-2 Maintaining the Printer Chapter 4 ❍ Do not unplug the printer unnecessarily . ❍ Do not unplug the printer or turn off a power strip to which the printer is attached when the printer’ s power is turned on.
Chapter 4 Maintaining the Printer 4-3 Maintaining the Printer Clean especially well around the plat en area. Be careful not t o touch the film cable. Clean the exterior of the pr inter with a soft cloth moistened with water . Clean awa y smudges and dust.
4-4 Maintaining the Printer Chapter 4 N The pattern on the left shows the no zzle pattern for the cart ridge in Holder 2 and the patt ern on the rig ht is for the cart ridge in Holder 1. ❍ On the General tab in the BJC-5100 Series Printer Driver , click the Print T est Page button.
Chapter 4 Maintaining the Printer 4-5 Maintaining the Printer Aligning the Print Heads W hen you click on the Start A ut o Head Alignment box, you see this screen: N Mak e sure y ou ha ve lett er -size plain paper loaded. The printer outputs a one-page pattern.
4-6 Maintaining the Printer Chapter 4 Cleaning the Print Heads Y our printer is equipped with a pr int head cleaning function to ensure constant high quality printing . W hen you turn the printer on, it automatically performs print head cleaning (if necessar y).
Chapter 4 Maintaining the Printer 4-7 Maintaining the Printer Saving P ower T o sav e pow er , you can automatically turn off the printer if it is idle for a specified period of time.
4-8 Maintaining the Printer Chapter 4 BJ Cartridge Guidelines Y ou can use these cartr idges w ith the printer: ❍ BC-2 1e Color BJ Cartridge Contains the print head unit and two r eplaceable BJ tanks—the BCI-21 Color BJ T ank contains c olor ink (cyan, magenta, yellow) and the BCI-21 Black BJ T ank contains black ink.
Chapter 4 Maintaining the Printer 4-9 Maintaining the Printer N ❍ For optim um use of the BJC-5100 Series pr inter , be sure t o install two cartr idges. ❍ If you install the BC-23 Enhanc ed Black BJ Cart ridge in Holder 1, the printer will pr int black ink only regardless of the cart ridge in Holder 2.
4-10 Maintaining the Printer Chapter 4 N Canon has more engineers dedicated to cr eating quality ink for providing the best results for output on Bubble J et printers than an y other organization. Canon does not prohibit the use of third-part y inks and the use of third-part y inks does not invalidat e the product ’ s limited warrant y .
Chapter 4 Maintaining the Printer 4-11 Maintaining the Printer ❍ Mak e sure both BJ tanks ar e installed in the BC-21e Color BJ Cart ridge. Att empting to use the BC-21e C olor BJ Cart ridge with one BJ tank only may cause ink clogging. ❍ If spilled, the ink is difficult to remov e.
4-12 Maintaining the Printer Chapter 4 ❍ Lift the co ver fr om the cent er . ❍ W henever y ou open the printer cov er , the car tr idge holder mov es to the cent er of the pr inter . ❍ The POWER/ERROR light blinks while the car tridge holder is positioned in the cent er of the pr inter .
Chapter 4 Maintaining the Printer 4-13 Maintaining the Printer ❍ If you ar e replacing an old BJ cartridge, dispose of the old cart ridge properly . ❍ If you ar e switching cartr idges, store the cartr idge in the Ink Cartr idge Storage Bo x. ❍ P eel off the prot ectiv e foil.
4-14 Maintaining the Printer Chapter 4 ❍ Lift off the orange cap from the print head and then remo ve the orange tape. ❍ Gently press the cartridge cover until it snaps int o place. Close the blue cartridge holder cover . Gently set the BJ cartridge into the cartridge holder .
Chapter 4 Maintaining the Printer 4-15 Maintaining the Printer C Do not manually mov e the mechanism that houses the BJ cart ridges. Att empting to mo ve the BJ cartridge holders will damage the pr inter . N W henever y ou turn off the printer , the BJ cartr idges move t o the home position on the rig ht and the print heads are capped.
4-16 Maintaining the Printer Chapter 4 Replacing a BJ Tank in the BC-2 1e Color BJ Cartridge If you ar e using a BC-21e Color BJ Cartr idge and you perform a print operation correctly but either the color or black output is blank, a BJ tank may be out of ink.
Chapter 4 Maintaining the Printer 4-17 Maintaining the Printer ❍ The color BJ tank is on the left; the black BJ tank is on the rig ht. ❍ Grasp the tab on the top of the tank and pull forward to release the BJ tank. ❍ Then lift the BJ tank up and out of the BJ car tr idge unit.
4-18 Maintaining the Printer Chapter 4 ❍ If you ar e replacing both tanks, repeat st eps 4 through 6 for the other BJ tank. ❍ Mak e sur e each BJ tank is c orrectly seated in its r espectiv e slot. Close the blue cartridge holder cover . Press firmly on the tab on the top of the BJ tank until it snaps into place.
Chapter 4 Maintaining the Printer 4-19 Maintaining the Printer ❍ The printer mov es the cart ridge holder to the home position on the rig ht of the pr inter .
4-20 Maintaining the Printer Chapter 4 ❍ Y ou must insert the car tridge correctly or the storage bo x will not close. ❍ The prot ectiv e cap must be remo ved fr om the cartr idge before y ou set it in the storage bo x. ❍ Be sure the lid snaps closed.
Chapter 4 Maintaining the Printer 4-21 Maintaining the Printer If you ha ve mor e than one Ink Cartridge Storage Box, you can hook them together . Simply connect them by the slides and groo ves on the sides of the containers.
4-22 Maintaining the Printer Chapter 4 ❍ P ack the printer in its original box with the packing suppor ts. ❍ Mak e sure the bo x is mar ked FRA GILE or HANDLE WITH CARE. ❍ Do not remo ve the BJ cartr idges from the printer or ship a BJ cart r idge or a BJ tank from which you ha v e remo ved the prot ective cap .
T roubleshooting Chapter 5 Troubleshooting 5-1 Due to toda y’ s rapidly changing computer en vironment, we ha ve plac ed troubleshooting information in a variet y of places to ensure that the most accurate information possible is available.
5-2 Troubleshooting Chapt er 5 The serial number is located on the label on the back of the printer (lowe r rig ht side near the powe r cable): N Att empting to r epair the printer yourself may void the limit ed warrant y as to that re pair . See the limited warranty infor mation that came with your printer for details.
Chapter 5 Troubleshooting 5-3 Cannot Install the Printer Driver Cause Solution Installation was Install the printer driver interrupted R efer to the Quick S tart Guide and install the printer driver using the correct pr ocedur e.
5-4 Troubleshooting Chapt er 5 P aper Does Not Feed From Sheet Feeder Cause Solution P aper is too thick Feed manually P aper within the range of 17 to 28 lb (64 t o 105 g/m 2 ) can be loaded in the sheet feeder . Thick er paper must be fed manually one at a time from the back of the pr inter .
Chapter 5 Troubleshooting 5-5 T roubleshooting An Error Message Appears Printing does not star t due to an er ror wr iting to LPT1 Cause Solution Printer is not on Check the POWER/ERROR light The POWER/ERROR light should be green. If the lig ht is flashing, the printer is warming up .
5-6 Troubleshooting Chapt er 5 Cause Solution Printer port LPT1: fault Check the status of the printer port LPT1 Click on Start , Sett ings , and Control P anel . Double-click on the Syst em icon. On the Device Manager tab , double- click Po r t s ( COM & LPT ).
Chapter 5 Troubleshooting 5-7 T roubleshooting Printing does not star t due to an application er ror or General Protection F ault Cause Solution M ultiple softwar e Quit other programs applications running Quit an y other application programs you are running and tr y printing again.
5-8 Troubleshooting Chapt er 5 Printing Halts Cause Solution The print job may Check the POWER/ERROR light be a finely detailed If the POWER/ERROR light is slowly flashing, then the photograph or printer is operating normally . The printer requires mor e illustration time to proc ess a finely detailed illustration or photogr aph.
Chapter 5 Troubleshooting 5-9 The last part of print job is not pr inting Cause Solution P aper used for printing Specify the paper size you are using in the driver Paper differs from the paper Size s.
5-10 Troubleshooting Chapt er 5 Printed and on-screen colors do not mat ch The color r eproduction methods used b y monitors differ fr om those used by printers.
Chapter 5 Troubleshooting 5-11 T roubleshooting Error Conditions W hen the POWER/ERROR light is orange, a printer error has occurred. The printer beeps to alert you to the type of error co ndition as follows: ❍ T wo beeps—An error co ndition exists, such as paper is out or jammed.
5-12 Troubleshooting Chapt er 5 ❍ If the paper tears off inside the pr inter , open the pr inter’ s co ver and r emov e an y paper left inside the printer . ❍ If necessar y , tur n the printer off before r emoving the jammed paper . When y ou turn the printer back on, star t the print operation again.
Specifications Appendix A Specifications A-1 Printing Specifications Printing Method Bubble J et ink-on-demand P aper Handling A ut omatic feed (17 to 28 lb) Letter 130 sheets Legal 100 sheets T r ansparencies 30 sheets En velopes 15 env elopes Man ual feed (17 to 146 lb) One sheet only ; thickness = 0.
A-2 Specifications Appendix A Recommended P aper T ypes Canon High Gloss Photo Film Canon Glossy Photo P aper Canon Glossy Photo Cards Canon Banner P aper Canon Brilliant W hit e P aper Canon High Res.
Appendix A Specifications A-3 Print Resolution Black only 360 × 360 dpi on plain paper 720 × 720 dpi on plain paper 1440 × 720 dpi on special paper Color 360 × 360 dpi on plain paper 720 × 720 dp.
A-4 Specifications Appendix A BJ Cartridges BC-2 1e Color BJ Cartridge Print head 64 nozzles for black 24 nozzles for each c olor (cyan, magenta, yel low ) Print head life Appr o ximately 2,000 c olor.
Appendix A Specifications A-5 Specifications General Interface IEEE 1284 ECP -compatible parallel interface Acoustic Noise Level Appr o x. 48 dB(A) Operating Environment T emperature 41° F to 95° F .
A-6 Specifications Appendix A.
Glossar y G-1 Automatic feed R efers to one wa y in which paper can be fed into the printer when the sheet feeder is used. BJ cartridge The printing mechanism that contains the print head unit and BJ tanks. Bubble Jet printing An ink jet ty pe of pr inting that heats the ink to a boiling point in a nozzle to form a bubble.
G-2 Glossar y ECP Extended Capability P ort. ECP is a protocol that pr ovides for a high performance bi-directional c ommunication path between the host adapter and the peripheral.
Glossar y G-3 High Speed Error Diffusion Halft oning method best suited for most printing and the default setting for the BJC-5100. The High Speed ED setting prints faster than Error Diffusion with slig htly less quality . Hue A color in the c olor spectrum.
G-4 Glossar y Noise level See dB(A). P age orientation R efers to the direction of pr int on the page. Printing across the width of a page is called port rait orientation.
Glossar y G-5 Printable area The area of a sheet of paper on which a printer can reproduc e text or graphics (the pr inting area is smaller than the paper). On this printer , the printing area varies depending on the t ype of paper being used. Printer driver Software that sends printing instructions to a printer .
G-6 Glossar y.
Index I-1 Index A A cc essories: 1-2–3 A coustic noise lev el: A-5 Align print heads: 2-7, 4-3–5, 5-2 Application err or: 5-7 Assorted P aper Starter Kit: 3-4 A uditing, printer: 2-15 A uthorized .
I-2 Index Canon (continued) engineers: 1-3 , 4-10 Fax R etrieval System: 1-4, 5-1 help: 1-4, 5-1 Re ferr al Serv ice: 1-2 Specialty Papers: 1-3, 3-1–6, 3-14–23 Capping, BJ cartr idges: 4-15 Cart r.
Index I-3 G Gamma setting: 2-5 General Prot ection Fault: 5-7 General specifications: A-5 General tab W indo ws 98/95: 2-8, 4-4 W indo ws NT : 2-11, 4-4 Glossar y : G-1–5 Glossy Photo Cards: 1-3, 3-.
I-4 Index N N ozzle pattern: 4-3–4 O Online Help , W indows: 2-4 support: 1-4, 5-1 Operating environment: A -5 Orientation setting: 2-4 Ownership, printer: 2-14 P Pa p e r does not feed: 5-4 fanning.
Index I-5 Printed page curled/warped/w rinkled: 5-10 smeared: 5-10 Printer auditing: 2-15 availability: 2-13 beeping: 2-6, 5-11 cable, fault: 5-9 cleaning: 4-2–3 does not print: 2-6, 5-5–9 guideli.
I-6 Index Serv icing, pr inter: 1-5, 5-11 Settings tab: 2-4, 3-4, 3-10, 3-14, 3-19, 3-23 Seven-c olor printing: 4-8 Sharing tab: 2-3, 2-14 Sheet feeder: 3-8, 3-11 capacity : A-1 Size setting, print me.
FCC Regulations FCC-1 FCC Regulations Bubble Jet Printer Model K1 0902 This device complies with P art 15 of the FCC R ules. Operation is subject to the follo wing two conditions: (1) This de vice may.
FCC-2 FCC Regulations Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interferenc e-causing equipment standard entitled “Dig ital A pparatus, ” ICES-003 of the Industr y Canada.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Canon BJC-5100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Canon BJC-5100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Canon BJC-5100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Canon BJC-5100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Canon BJC-5100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Canon BJC-5100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Canon BJC-5100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Canon BJC-5100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
