Manuale d’uso / di manutenzione del prodotto 2868B002 del fabbricante Canon
Vai alla pagina of 37
Getting Started Make sure to read this manual before using the printer . Please keep it in hand for future reference. iP3600 =Read Me First= Photo Printer series.
Symbols ■ The following symbols are used to mark important instructions. Observe these instructions. Additional explanations. Instructions that, if ignored, could result in personal injury or material damage. Instructions that must be observed for safe operation.
1 Contents Check the Included Items T urn the Power On Install the Print Head Install the Ink T anks Install the Software Loading Paper 1 2 3 4 5 6 After Installing the Printer.
2 1 2 3 4 5 6 1 Check the Included Items Before turning on the printer , remove all the orange tapes and the protective sheets. • power cord Print Head ink tank Manuals Setup CD-ROM (containing the drivers, applications and on-screen manuals) W arranty • • • A USB cable is necessary to connect the printer with your computer .
3 1 2 3 4 5 6 (1) (2) (A) (B) 2 2 3 1 T urn the Power On Plug in the power cord on the left side at the back of the printer and connect the other end to the wall outlet. Press the ON button (A) to turn on the printer . Confirm that the POWER lamp (B) lights green.
4 (B) (A) (C) (D) 3 1 2 Install the Print Head Open the Paper Output T ray (A) and the T op Cover (B). Raise the Print Head Lock Lever (D). Firmly raise the Print Head Lock Lever until it stops. (The Print Head Lock Lever may feel heavy .) • If the Print Head Holder does not move, make sure that the printer is turned on.
5 1 2 3 456 (D) 4 5 3 Remove the Print Head from the silver package. Remove and discard the orange protective cap. T ilt the Print Head and set it in place.
6 (1) (2) (A) 4 1 2 Install the Ink T anks Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely . Do not hold the sides of the ink tank; ink may splash. • Do not handle the ink tanks roughly such as applying them excessive pressure or dropping them.
7 5 6 1 2 3 4 4 3 Install all the other ink tanks in the same way . Install all the ink tanks . Make sure all the Ink lamp lights red. • Once you have installed the ink tanks , do not remove them unnecessarily . • Press the PUSH mark on the ink tank until it clicks into place.
8 5 6 1 2 3 4 (B) (C) 5 6 4 W ait until the POWER lamp lights green (about 4 minutes) and go to the next step. The printer may make some operating noises when preparing to print. This is normal operation. • • Close the T op Cover . If an Alarm lamp (B) ashes orange, make sure that the Print Head and the ink tanks are correctly installed.
9 6 1 2 3 5 4 5 Install the Software T o use the printer by connecting it to a computer , software including the drivers needs to be copied (installed) to the computer's hard disk. The screens below are based on Windows Vista operating system Ultimate Edition (hereafter referred to as " Windows Vista ") and Mac OS X v .
10 (A) (B) 1 5 If the Found New Hardware or Found New Hardware Wizard screen appears: Windows Press the ON button (A) to TURN OFF THE PRINTER and turn on the computer , then insert the Setup CD-ROM into the CD-ROM drive. The setup program should run automatically .
11 6 1 2 3 5 4 3 2 Windows Vista Windows Vista AutoPlay screen appears, click Run Msetup4.exe . User Account Control screen appears, click Continue . If the same screen reappears in subsequent steps, click Continue .
12 6 5 4 5 Click Install . Move the cursor over items to display explanations. Installation starts. Follow any on-screen instructions to install the software. • Read the License Agreement screen carefully and click Y es . Click Easy Install . The drivers, application software, and on-screen manuals are installed automatically .
13 6 1 2 3 5 4 USB 8 7 The USB port is located on the right side at the back of the printer. • It takes about 20 seconds for the POWER lamp to light green. When the printer is recognized by the computer , a message appears on the screen. If you cannot go to the next procedure after 10 minutes, click Help and con rm the message.
14 1 0 5 9 For details, refer to "6 Loading Paper" on page 22. • When the Load plain paper into the cassette screen appears, load plain paper in the Cassette and click Next . Click Next . It may take a while for the next screen to appear .
15 6 1 2 3 5 4 Serial Number * * * * * * * 1 1 Click Next . If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your product. Y ou will need your product serial number , which is located on the inside of the printer .
16 1 2 1 3 5 Click Exit . If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart . After restarting the computer , remove the Setup CD-ROM and keep it in a safe place.
17 6 1 2 3 5 4 USB 2 3 1 Connect one end of the USB cable to the computer and the other to the printer , then turn on the computer and insert the Setup CD-ROM into the CD-ROM drive. Double-click the Setup icon. If the CD-ROM folder does not open automatically , double-click the CANON_IJ icon on the desktop .
18 5 4 5 Click Easy Install . The drivers, application software, and on-screen manuals are installed automatically . Click Install . Move the cursor over items to display explanations. If you want to select particular items to install, click Custom Install and follow the on- screen instructions to proceed with the installation.
19 6 1 2 3 5 4 7 6 Click Next . Read the License Agreement screen carefully and click Yes . Installation starts. Follow any on-screen instructions to install the software. • For better print results, it is recommended that you align the Print Head before printing photos.
20 5 8 9 Click Next . Macintosh For details, refer to " 6 Loading Paper " on page 22. • When the Load plain paper into the cassette screen appears, load plain paper in the Cassette and click Next .
21 6 1 2 3 5 4 Serial Number * * * * * * * 1 1 1 0 Click Restart . Click Restart to restart the computer . After restarting the computer , remove the Setup CD-ROM and keep it in a safe place. Next, read " 6 Loading Paper " on page 22! Click Next .
22 (A) (E) (F) (D) (C) (B) (A) (G) (H) 6 2 1 3 This section explains how to load paper in the Cassette (A) and Rear T ray (B). The Cassette (A) supports plain paper (C) only . T o print on Photo Paper / Hagaki (D), be sure to load it in the Rear T ray (B).
23 6 1 2 3 4 5 (E) (H) (G) (I) 4 5 6 7 T o print on speciality paper , be sure to load it in the Rear T ray . • Load paper . Do not exceed the Load Limit Mark (I). Slide the Paper Guide (G) against left edge of the paper . Attach the Cover (E) and insert the Cassette into the printer until it clicks into place.
24 6 1 2 3 4 5 (K) (J) (L) (L) (L) (L) (M) 9 8 1 0 1 1 6 Printer installation is now complete! Open the Rear T ray Cover (J), and pull up the Paper Support (K).
25 Safety Precautions Fo r p r o p e r u s e, r e a d s a f et y p r e c a u t i o n s b e f o r e u s i n g t h e p r o d u c t . Safety and Environment Information After Installing the Printer Manuals ■ Getting Started (this manual) D e s c r ib e s h o w t o s e t u p a n d u s e yo u r p r i n t e r .
26 Solution Menu ■ Solution Menu is a gateway to functions and information that allow you to make full use of the printer! Open various applications and on-screen manuals with a single click. Y ou can start Solution Menu from the Solution Menu icon on the desktop (Windows) or on the Dock (Macintosh).
27 Using Y our Printer ■ Now let’s use the printer! This printer allows you to print in various ways using the printer driver and application software installed on the computer . For example, you can print borderless photos, and create your own calendar etc.
28 (A) 2 1 3 4 Print Photos from a Computer In Solution Menu, click One- Click to Photo Print . Easy-PhotoPrint EX allows you to print photos easily . This section explains how to print borderless photos using 4" x 6" size Photo Paper Plus Glossy II.
29 (A) 1 2 3 1 2 1 2 3 Aligning the Print Head Windows Macintosh Windows Macintosh Load three or more sheets of A4 or Letter-sized plain paper into the Cassette (A). This section explains how to align the Print Head . The screens are based on Windows V ista .
30 (B) (C) 4 5 Confirm the displayed message and click Align Print Head . When a message appears after clicking Align Print Head , click OK . Printing of the first pattern starts. After the pattern is printed, click Y es . Do not open the T op Cover while printing.
31 7 6 Confirm the displayed message and click OK . Click OK in the subsequent message. Printing of the second pattern starts. Look at the first printout and enter the number of the pattern that has the least noticeable vertical or horizontal streaks for columns A to G, then click OK ( Send for Macintosh).
32 8 9 Look at the second printout and enter the number of the pattern that has the least noticeable vertical streaks for columns H to Q, then click OK ( Send for Macintosh). Less noticeable vertical white streaks More noticeable vertical white streaks Confirm the displayed message and click OK .
33 1 0 1 1 Look at the third printout and enter the number of the pattern that has the least noticeable horizontal stripes for columns a to j, then click OK ( Send for Macintosh). Less noticeable horizontal white stripes More noticeable horizontal white stripes Click OK ( Quit for Macintosh).
34 Specifications Minimum System Requirements Conform to the operating system’s requirements when higher than those given here. Operating System Processor RAM Windows Vista 1 GHz processor 512 MB Wi.
QT5-1602-V01 XXXXXXXX ©CANON INC.2008 PRINTED IN VIETNAM www .usa.canon.com Email T ech Support — www .canontechsupport.com The following ink tanks are compatible with this product.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Canon 2868B002 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Canon 2868B002 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Canon 2868B002 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Canon 2868B002 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Canon 2868B002, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Canon 2868B002.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Canon 2868B002. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Canon 2868B002 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
