Manuale d’uso / di manutenzione del prodotto DG472500DI del fabbricante Campbell Hausfeld
Vai alla pagina of 18
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
2. This power tool is intended to function primarily as a cut-off tool or a light-duty angle grinder. Operations such as polishing, wire brushing, and long-duty grinding are not recommended with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.
3 DG472500DI e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool inunexpected situations. f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
4 w) Charge the battery pack in a well-ventilated area. Do not allow any object to cover the charger and/or battery pack while charging. x) Do not operate the charger if it has been dropped, received a sharp blow, or otherwise been damaged. If damaged, have it serviced by a qualified repair person.
d) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can fly apart. e) The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool.
8) Additional Safety Instructions for Grinding and Cutting off Operations a) Always use guard designed for the type of wheel you are using. The guard must be securely attached to the power tool and positioned for maximum safety, so the least amount of wheel is exposed towards the operator.
2) Areas where paint removal is occurring should be sealed with plastic sheeting of at least 4 mils thickness. 3) Sanding should be done in a manner to reduce tracing of paint dust outside the work area. C) CLEANING AND DISPOSAL 1) All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the project.
little or no side-by-side movement when trying to rotate this part on the spindle. If the flange continues to rotate on the spindle, then rotate it until it properly seats itself, that is, until it has little or no side-to-side movement.
• Once a cut is started and a notch has formed, continue cutting at the same angle until the desired cut is made. Changing the angle of the disc will cause the wheel to bend and possibly break. • Once the cutting operation is complete, remove the tool from the workpiece and allow the tool to stop rotating before laying it down.
• In order to get the most out of your battery pack, it is highly recommended that the packs not remain in the charger for more than 3 hours. So once fully-charged (indicated by the green charger light illuminating), it is best to remove the battery pack at or near that point.
11 DG472500DI Notes 26 Sp Manual de Instrucciones 2. Esta herramienta eléctrica está diseñada para funcionar principalmente como una herramienta de corte o una rectificadora de ángulo para trabajos livianos. No se recomienda el uso de esta herramienta eléctrica para trabajos largos de rectificación o brillo.
Limited W arranty 1. DURATION: One (1) Year from the date of purchase by the original purchaser on drill. Batteries are warranted for one (1) year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 424-8936 3.
24 Fr Garantie Limitée 1. DURÉE : Un (1) an à partir de la date d’achat par l’acheteur original de l’outil. Les batteries sont garanties pour un (1) an. 2. GARANTIE ACCORDÉE PAR (GARANT) : Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone: (800) 424-8936.
Pour Pièces de Rechange ou assistance technique, appeler 1-800-424-8936 S’il vous plaît fournir l’information suivante: - Numéro de Modèle - Numéro de série (si présent) - Description et nu.
22 Fr Instructions D’Utilisation la première fois, charger entièrement la batterie. Ceci s’accomplit en branchant d’abord le chargeur de batterie dans une source de courant de 120 V (60 Hz) et.
21 Fr (0,12 po) ou moins et doit donc être fixée avec la partie soulevée de l’écrou face à l’utilisateur. (Voir la figure 5.) • Lorsque l’écrou de serrage est resserré à la main, resse.
20 Fr Instructions D’Utilisation Les disques de coupe sont normalement plus minces que les disques de meulage et sont utilisés principalement pour couper à travers les objets d’acier comme les clous, les boulons, les clôtures, les rails, etc.
19 Fr e) Supporter les panneaux ou toute pièce de travail surdimensionnée pour réduire le risque de pincement de la meule et de recul. Les larges pièces de travail tendent à s’affaisser sous leurs propres poids.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Campbell Hausfeld DG472500DI è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Campbell Hausfeld DG472500DI - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Campbell Hausfeld DG472500DI imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Campbell Hausfeld DG472500DI ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Campbell Hausfeld DG472500DI, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Campbell Hausfeld DG472500DI.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Campbell Hausfeld DG472500DI. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Campbell Hausfeld DG472500DI insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
