Manuale d’uso / di manutenzione del prodotto 7C03 MMAC del fabbricante Cabletron Systems
Vai alla pagina of 16
7C03 MMAC SmartSWITCH ™ Installation Guide 9031699-01.
Notice i NOTICE Cabletron Systems r eserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made.
Notice ii FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesired operation.
Notice iii VCCI NOTICE This equipment is in the 1st Class Category (information equipment to be used in commercial and/or industrial ar eas) and conforms to the standards set by the V oluntary Control Council for Interference (VCCI) by Information T echnology Equipment aimed at preventing radio interfer ence in commercial and/or industrial areas.
Notice iv DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer ’s Name: Cabletron Systems, Inc. Manufacturer ’s Addr ess: 35 Industrial Way PO Box 5005 Rochester , NH 03886-5005 European Repr esentative Name: Mr.
v CONTENTS CHAPTER 1 INTRODUCTION 1.1 USING THIS MANUAL ......................................................................... 1-1 1.2 USING THE SMARTSWITCH MANUAL SET ................................... 1-1 1.3 7C03 MMAC SMARTSWITCH OVERVIEW .....
1-1 CHAPTER 1 INTRODUCTION W elcome to Cabletron Systems 7C03 MMAC SmartSwitch Installation Guide . This manual is a simple installation and refer ence guide. The 7C03 MMAC SmartSwitch is a unique self-contained module that can be placed into an MMAC series chassis 1 .
1-2 Introduction In addition, any local management information that is specific to a particular SmartSwitch interface module is described in a module specific local management appendix.
Introduction 1-3 Figure 1-1. 7C03 MMA C Smar tSwitch Because the 7C03 MMAC SmartSwitch does not attach to the data channels on the backplane of an MMAC chassis, data can not be transmitted internally from SmartSwitch interface modules to the other modules in the MMAC chassis.
1-4 Introduction 1.3.1 7X00 SmartSwitch Controller Module The 7X00 SmartSwitch Controller Module is the only pr ocessing and management element in the 7C03 MMAC SmartSwitch. The 7X00 Module has no front panel data ports. All data enters and exits the 7X00 Module via the SmartSwitch Bus on the 7C03 MMAC SmartSwitch’s backplane.
Introduction 1-5 1.3.3 Operations Data packets entering through the fr ont panel of a SmartSwitch interface module in the 7C03 MMAC SmartSwitch are converted by the module’s hardwar e into frames that have a common “canonical” format. Canonical frames are forwar ded along the 7C03’s SmartSwitch Bus to the 7X00 Module in slot one.
1-6 Introduction 1.4 RELATED MANUALS The following manuals supplement the procedur es and other technical data provided in this manual. The pr ocedures will be refer enced where appr opriate, but will not be repeated. Cabletron Systems SmartSwitch Interface Module User’ s Guides (module specific).
2-1 CHAPTER 2 INSTALLATION This chapter contains instructions for unpacking and installing the 7C03 MMAC SmartSwitch in an MMAC chassis. The 7C03 MMAC SmartSwitch can be installed in an MMAC-M5FNB or in an MMAC-M8FNB chassis.
2-2 Installation 2.2 INSTALLING THE 7C03 MMA C SMAR TSWITCH Prior to installing the 7C03 MMAC SmartSwitch, please read the note that appears on page 2-1. T o install the 7C03 MMAC SmartSwitch in an MMAC-M5FNB or MMAC-M8FNB chassis, use the following steps and refer to Figure 2-1.
Installation 2-3 Figure 2-1. Installing the 7C03 MMA C Smar tSwitch in an MMA C-M8FNB card guide plastic rail.
3-1 CHAPTER 3 TECHNICAL SPECIFICATIONS This chapter includes the technical specifications for Cabletron Systems 7C03 MMAC SmartSwitch. Cabletron Systems r eserves the right to change these specifications at any time without notice. 3.1 SERVICE MTBF: >200,000 hours MTTR: <0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cabletron Systems 7C03 MMAC è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cabletron Systems 7C03 MMAC - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cabletron Systems 7C03 MMAC imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cabletron Systems 7C03 MMAC ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cabletron Systems 7C03 MMAC, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cabletron Systems 7C03 MMAC.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cabletron Systems 7C03 MMAC. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cabletron Systems 7C03 MMAC insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
