Manuale d’uso / di manutenzione del prodotto 29055 del fabbricante Cables to Go
Vai alla pagina of 21
1 U SER G UIDE 2-P ORT USB 3.0 S UPER S PEED PCI E XPRESS C ARD Model: 29055.
1 Introduction .................................................................................................................. ...................................................... 2 Features .......................................................
2 Thank you for purchasing the 2-Port USB 3.0 Supe rSpeed PCI Express Card. The 2-Port USB 3.0 SuperSpeed PCI Express Card adds SuperSpeed USB cap abilities to your computer. Simply install this card into an available PCI slot on your computer to add two USB 3.
3 Adds two USB 3.0 A-Male ports to a computer Connects internally via the PCI-e connector 5 Gbps signaling rate- 10X faster than USB 2.0 Backwards compatible with USB 2.
4 Operating System: Windows 7, XP, or Vista™ S YSTEM R EQUIREMENTS.
5 2-Port USB 3.0 SuperSpeed PCI Express Card Driver CD User Guide P ACKAGE C ONTENTS.
6 D EVICE O VERVIEW USB 3.0 Ports.
7 Before you install the device in your computer, you will need to install the necessary driver for proper operation. Please follow the procedure below. For Windows XP, Vista, Windows 7 Note: The following setup is an example shown using a Windows XP operating system.
8 Step 2 After reading the End-User License Agreement, please select “I accept the terms in the License Agreement” and click Next . Step 3 Please click Browse to choose the destination folder, and then click Next .
9 Step 4 Click Install to begin driver installation. The driver installation may take a few minutes. You may also get a software installation Windows security pop-up during this time. Click Continue Anyway when it appears to complete the installation.
10 Step 5 When the installation has completed, click Finish to exit the setup wizard. D RIVER I NSTALLATION.
11 Step 1 Turn off your computer and remove th e cover/panel to expose the PCI slot. Step 2 Plug the 2-Port USB 3.0 Card into the PCI slot on the computer. Step 3 Replace the cover/panel and turn on your computer. When your computer starts up, a Found New Hardware Wizard will appear.
12 Step 4 When the Found New Hardware Wizard appears, select Yes, this time only , and click Next . Step 5 Choose Install the software autom atically and click Next . The Windows security pop-up may appear during this process. Click Continue Anyway to continue with the installation.
13 Step 6 Click Finish to complete the installation and exit the wizard. Step 7 The Found New Hardware Wizard will appear aga in. Repeat steps 4-6 for second USB 3.
14 After you have completed the driver and device installation, you can go to the Device Manager to verify the product is installed and recognized properly.
15 Product No. 29055 Complies USB Rev. Ver. 3.0 PCI Express Base Specification Revision 2.0; PCI Bus Power Management Interface Specification: Revision 1.
16 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience proble ms due to workmanship or material defect for the duration of this warranty, we will repair or repl ace this device.
17 ! Do not plug the unit in any outlet that does not have en ough current to allow the device to function. Refer to the specifications in this manual fo r power level of the unit. ! Liquid: If this unit or its corresponding powe r adapter has had liquid sp illed on or in it, do not attempt to use the unit.
18 FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received.
19.
20 For more information on this produc t or to check for updated drivers, manuals or frequently asked questi ons please visit our website. www.cablestogo.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cables to Go 29055 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cables to Go 29055 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cables to Go 29055 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cables to Go 29055 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cables to Go 29055, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cables to Go 29055.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cables to Go 29055. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cables to Go 29055 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
