Manuale d’uso / di manutenzione del prodotto 98-0917/02-10 del fabbricante Bushnell
Vai alla pagina of 21
U ser Manual Model#: 118326 LIT. #: 98-0917/02-10 DIGIT AL CAMERA BINOCULAR V ersion 2.0.
2 Camera and Binocular Parts Guide (I) USB Port (H) Remote Jack (J) Card Slot (G) Battery Compartment (M) Camera Lens (L) SNAP Button (K) Binocular Focus (A) LCD Displa y (D) 5-way Keypad w/ “Enter.
3 1) T he S yncFocus is pow ered by two AAA ba tteries (not included). Insert batt eries int o the compartment (G) , using the polarity marks inside for refer ence. A power met er in the lower left corner of the display indicates battery condition. 2) Insert an SD or SDHC card into slot (J) if g reater storage is desired.
4 T o stop recording the video, press the SNAP button again. By default, videos are recorded as a 15 second loop (“instant replay”). T o change this, press MENU -the rst item is “Resolution” . Pr ess Enter , then selec t “Video Size ” .
5 Loading Batteries T urn the SyncFocus over , slide open the batt ery cover as indicated by the arrow, remove and set aside. Insert 2 AAA Alkaline or Lithium batteries into the compartment (G) in the direction indicated inside, then replace the cover , sliding it back into place until it clicks.
6 BASIC SETUP Setting the Date and Time/Date Stamp F eature Y ou may want to go into the main options menu and set the correct date and time before beginning to take photos (or turn o the date stamp featur e, as the default setting is “ on”). T o set date and time: Raise the LCD displa y and press the 1.
7 Setting the Reticle Focus and Diopter A djustment Before you begin taking photos, a few simple, one -time adjustments should be made to ensure that you can get sharp photos of any subject by just using the main focus knob on the binoculars.
8 Once set, note the number on the left and right binocular tubes that the index mark on each eyecup is lined up with. With the reticle f ocus and diopter adjustment set to these positions , you shoul.
9 T AKING STILL PHOTOS After completing the basic and Syncfocus setups as described in the previous pages, you are ready to take a photo: Raise the L CD display 1. (A) and briey press and release the ON/OFF button-the startup screen will appear , followed by the live image from the camera lens.
10 The “r emaining photos ” 4-digit counter in the low er left corner of the displa y abov e the battery indicator 5. will drop by one number af ter each photo (or two , depending on your subject and settings) is taken.
11 SHOOTING VIDEOS SETTING/USING VIDEO MODE T o switch from still photo to video mode, press the Right arrow key 3 times, until the red movie camera icon is display ed at the t op right area of the LCD (see “L CD P review Displa y Icons ” , #10 ).
12 L CD Preview Displa y Icons # Icon 1 Battery Indicator (full battery shown) 2 # of Photos Remaining (based on unused internal or card memory) 3 Internal or Card Memory 4 White Balance Setting ( A u.
13 Using the Main Menu- Options and Settings As mentioned ear lier in this manual, your SyncFocus is already set for high resolution and quality right out of the box.
14 OPTION SETTINGS DESCRIPTION Resolution ( Video Size) 640x480 30F Loop , 640x480 30F Norm, 640x480 15F Loop , 640x480 15F Norm, 320x240 30F Loop , 320x240 30F Norm, 320x240 15F Loop , 320x240 15F Norm “640x480” or “320x240”=r esolution in pix els per video frame.
15 OPTION SETTINGS DESCRIPTION White Balance Auto , Dayligh t, Cloudy , Fluoresc ent, T ungsten Sets the referenc e for neutral white, so that colors are reproduced correctly . I f “ Auto” does not provide good results, try the setting that matches the light source .
16 OPTION SETTINGS DESCRIPTION Date Stamp MM/DD/YY , YY/MM/DD, OFF Use the rst two settings if you want the dat e and time imprinted in the lower right corner of all y our photos-you have the option of month rst or y ear rst formats. The time will also be included-only 24 hr format is available.
17 OPTION SETTINGS DESCRIPTION Delete One OK , Cancel Highlight “OK” and press Ent er to delete the currently displayed photo or video . If pressed accidently, highlight “CANCEL ” and press Enter . Format OK, Canc el Same as above except deletes entir e contents of internal or card memory.
18 1. T urn on the S yncFocus (press ON/OFF ). C onnect the supplied cable to the USB port (I) below the SD card slot on the SyncF ocus ( pull down the rubber cover ap-please refer to the “Camera.
19 5. After the photos are transferred to your computer , you can disconnect the SyncF ocus. W indows 2000 may produce a screen warning that you have disconnected a USB device without stopping or ejecting the “ disk ” rst (your photo les will not be harmed).
Specifi cations and designs are subject to change without any notice or obliga tion on the part of the manufacturer. FCC Compliance Statement: is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
©2010 Bushnell Outdoor Products For further qu estions or additional information please contact: Bushnell Outdoor Products 9200 Cody , Overland Park, Kansas 66214 (800) 423-3537 • www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bushnell 98-0917/02-10 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bushnell 98-0917/02-10 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bushnell 98-0917/02-10 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bushnell 98-0917/02-10 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bushnell 98-0917/02-10, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bushnell 98-0917/02-10.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bushnell 98-0917/02-10. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bushnell 98-0917/02-10 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
