Manuale d’uso / di manutenzione del prodotto Baby Accessories del fabbricante Britax
Vai alla pagina of 21
Baby Safe User Guide P2410_R01i.qxd 11/1/2004 10:51 AM Page 1.
T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 W ARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Notes .
3 2 • Never use the adjuster strap to lift or carry this child restraint. Doing so could cause damage to the harness adjuster and webbing. Always carry a child restraint by the handle or shell. • This child restraint must not be used in boats, or other non-certified applications.
5 4 Safety Information Safety Information Important Notes • V erify that the child restraint is secure and that the harness is properly adjusted around the child each time the child r estraint is used. • Adjust the harness to fit the clothes the child is wearing.
7 6 Features Features 1 2 3 9 8 7 6 5 4 13 12 11 10 25 16 23 21 20 19 18 17 15 14 5 26 10 24 22 13 27 28 29 1 Canopy 2 Handle 3 Cover 4 Head Support Pillow 5 Harness 6 Comfort Pad 7 Chest Clip 8 Buckl.
Basic Carrier Functions 9 Harness T o loosen harness, press and hold harness adjuster lever , while pulling harness straps away from carrier . ( fig. D ). T o tighten harness, pull harness adjuster strap away from carrier ( fig. E ). 8 Basic Carrier Functions Buckle T o fasten buckle, fit the two buckle tongues together ( fig.
Handle The handle is designed to be adjusted to one of three positions: Sitting, In-V ehicle, or Carrying ( fig. C ). T o adjust, press both handle release buttons while rotating handle into desired position. IMPORTANT: Always adjust handle to In- V ehicle position while using in vehicle.
13 Using the Carrier 10 Slowly pull the harness adjuster strap to tighten harness for a snug fit ( fig. D ). 11 Position the chest clip at the center of the child’ s chest, level with the child’ s armpits. ( fig. E ) . 12 V erify that harness is not twisted and all connections are secure.
15 Using the Carrier Harness Height Adjustment 1 Loosen harness completely . 2 From the rear of the carrier , unhook the harness straps from the yoke ( fig. A ). 3 Lean head support pillow forward, then pull straps through the shell and cover . • It is not necessary to pull straps through slots in the head support pillow .
17 V ehicle Compatibility V ehicle Seating Positions WARNING: • Forward facing vehicle seats MUST be used with this child carrier . Side facing or rear facing vehicle seats CANNOT be used. • DO NOT place a child carrier in the front seat of a vehicle with a passenger air bag, unless the air bag is turned off.
V ehicle Belt Installation Spacers Due to varying locations of vehicle belt anchor points, the V ehicle Belt Installation Spacers must be used for a secure vehicle belt installation. T o use spacers, insert one spacer on each side of anti-rebound bar ( fig.
Using Carrier with Base T o attach, line up carrier with base, rear facing, then push down until positive click confirms correct attachment ( fig. D ). Check installation by lifting carrier from both ends to verify that both attachment rods are engaged with the base.
23 Base Installation 5 Adjust foot prop so that it is against the vehicle floor . WARNING: Never use foot prop to raise base above vehicle seat surface. Doing so will reduce the stability of the base. 6 Attach carrier to base. • V erify that the green indicator band on the release button is fully visible.
25 Base Installation 8 Press the base firmly into the seat while removing slack from the lap portion of the vehicle belt, then the shoulder portion ( fig. E ). 9 Close the lock-off over the vehicle belt ( fig. F ), then slide clip in to secur e. 10 V erify that vehicle belt is tight and that the base is stable.
8 Press the base firmly into the seat while removing slack from the vehicle belt, ( fig. E ). 9 Close the lock-off over the vehicle belt ( fig. F ), then slide clip in to secur e. 10 V erify that vehicle belt is tight and that the base is stable. • Base is tight when it cannot be moved more than 1” (2.
Carrier Only Installation 29 4 Push the carrier firmly into the vehicle seat while removing slack from the lap portion of the vehicle belt, then the shoulder portion ( fig. D ). 5 V erify that vehicle belt is tight and that the carrier is stable. • Base is tight when it cannot be moved more than 1” (2.
5 Adjust carrier handle to In-V ehicle position. 6 V erify that vehicle belt is tight and that the carrier is stable. • Base is tight when it cannot be moved more than 1” (2.5 cm) at the belt path • V erify that the red line on carrier is level with the ground.
33 Care and Maintenance 32 Care and Maintenance Cleaning the Buckle If a child eats and drinks while in the carrier , the buckle may need to be periodically checked and cleaned of any accumulated debris or dried liquids. • THOROUGHL Y RINSE, using warm water ( fig.
35 Care and Maintenance 34 Care and Maintenance Cleaning the Cover , Belly pad & Head Support Pillow • HAND W ASH, using cold water and mild soap. • LINE DRY , to pr event shrinkage. • DO NOT : Bleach, machine wash, machine dry , or iron. Cleaning the Shell & Harness • BRUSH A W A Y LOOSE DEBRIS, using a soft bristled brush.
36 W arranty This child restraint was manufactured by Britax. Britax Child Safety , Inc. (“Britax”) warrants this product to the original retail purchaser as follows: LIMITED ONE-YEAR W ARRANTY This product is warranted against defective materials or workmanship for one year from the date of original purchase.
P2410_R01i.qxd 11/1/2004 10:54 AM Page 40.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Britax Baby Accessories è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Britax Baby Accessories - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Britax Baby Accessories imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Britax Baby Accessories ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Britax Baby Accessories, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Britax Baby Accessories.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Britax Baby Accessories. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Britax Baby Accessories insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
