Manuale d’uso / di manutenzione del prodotto 810-5600-0 del fabbricante Brinkmann
Vai alla pagina of 16
OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS OUTDOOR GAS COOKER W ARNING READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL TO A VOID PERSONAL INJURY OR PROPER TY DAMAGE.
• Use smoker only on a hard, level, noncombustible, stable surface (concrete, ground, etc.). Never use on wooden or other surface that can burn. • Always use a drip pan/ash guard under smoker to protect surface from heat damage and/or discoloration and to catch ashes, embers and drippings.
• Use a sufficient amount of flavoring wood to avoid having to remove smoker body from base pan during the cooking process. This will limit the danger of spilling hot liquid from the water pan which could cause serious bodily injury .
ASSEMBL Y INSTRUCTIONS READ ALL WARNINGS AND INSTRUCTIONS CAREFULL Y BEFORE ASSEMBLING OR OPERA TING YOUR COOKER. FOR MISSING P ARTS, PLEASE CALL CUSTOMER SERVICE A T 1-800-527-0717. (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged.
STEP 1: a. T urn base pan upside down to assemble. Attach leg brackets to base pan with 10-24 x s " screws and square nuts. NOTE: The two screw holes in tube portion of leg bracket must align to point to center of base pan. b. Insert end of leg with two holes into leg bracket and align holes.
STEP 3: a. Install control panel assembly to front of base pan by inserting end of brass extension tube through elongated hole in base pan. Attach control panel to base pan using two 10-24 x s " screws and square nuts. Elongated Hole Base Pan Square Nuts Control Panel 10-24 x s " screws Brass Extension T ube Electrode Wire STEP 4: a.
STEP 5: a. T urn burner assembly over in base pan. Insert the end of brass extension tube (that extends inside the base pan) into the head of burner mixer tube. b. Position burner assembly in center of base pan and push tab on bottom of burner bracket through slot in bottom of base pan.
STEP 7: a. Attach wooden handle halves to metal brackets using 8-32 x w " screws and nuts as illustrated. b. Attach two handles to sides of smoker body using 10-24 x s " screws and square nuts.
GAS LEAK TESTING THE GAS LEAK TESTING PROCEDURE MUST BE PERFORMED EVERY TIME THE T ANK IS CONNECTED TO SMOKER. W ARNING • Gas leak testing must be performed outdoors in a well ventilated area. • During the gas leak testing procedure, always keep unit away from open flames, sparks or lit cigarettes.
OPERA TING INSTRUCTIONS PLACE THE SMOKER OUTDOORS ON A HARD, LEVEL, NON-COMBUSTIBLE SURF ACE AW A Y FROM ROOF OVERHANG OR ANY COMBUSTIBLE MA TERIAL. PLACE THE SMOKER AW A Y FROM OPEN WINDOWS OR DOORS TO PREVENT SMOKE FROM ENTERING YOUR HOUSE. IN WINDY WEA THER, PLACE THE SMOKER IN AN OUTDOOR AREA THA T IS PROTECTED FROM THE WIND.
1. Remove dome lid and smoker body from base pan. 2. Light the burner following “Lighting Instructions” section of this manual. 3. Place a cooking grill on the 10-24 x w " screws in the base pan. Place the dome lid on the base pan and preheat grill for 5 minutes on MEDIUM flame.
1. Follow instructions in the “Smoking” section of this manual to set up the smoker . Light burner following “Lighting Instructions” section in this manual. Place on “LOW” setting. 2. Place empty water pan inside smoker body on the lower support brackets.
Adding Wood During Cooking Additional flavoring wood should not have to be added during the cooking process, however , it may be necessar y when cooking ver y large pieces of meat. Follow the instructions and warnings below to avoid injury while adding wood.
W ARNING • Allow liquid in water pan to cool before handling to avoid being burned or scalded. • Always allow the smoker and all components to cool completely before handling. • Before smoker can be left unattended, remaining embers and ashes must be removed.
• In some parts of the country, spiders have been found to create flashback problems or improper operation of the burner by spinning webs in the mixer tube. The webs may block the gas flow which results in a flashback ( a fire in the burner mixer tube).
140-7047-0 12/98 Owner’ s Manual for Model Smoke’N Grill Gas 810-5600-0 For one year from date of purchase, The Brinkmann Corporation warrants the Smoke’N Grill Gas Smoker against defects due to workmanship or materials to the original purchaser .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Brinkmann 810-5600-0 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Brinkmann 810-5600-0 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Brinkmann 810-5600-0 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Brinkmann 810-5600-0 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Brinkmann 810-5600-0, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Brinkmann 810-5600-0.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Brinkmann 810-5600-0. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Brinkmann 810-5600-0 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
