Manuale d’uso / di manutenzione del prodotto DVD R/RW del fabbricante Addonics Technologies
Vai alla pagina of 17
Addonics TECHNOLOGIES DVD±R/RW DigiCopier Users Guide Revision 1.0.
FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonabl e protection against harmful interference in a residential installa tion.
Contents FCC Warning .............................................................................. 1 Contents ...................................................................................... 2 Chapter 1 Prefac e ................................
Chapter 1 Preface This is a Preliminary version of the manual intended to provide advance information on the Addonics Technologies’ external DVD DigiCopier drive. The information is as complete and as accurate as possible as of the publication date, but will be superseded and updated periodically by revised manuals.
Chapter 2 Getting Started Make sure that you have the following items: For DVD±R/RW DigiCopier with USB2.0 Cable ! One DVD±R/RW DigiCopier main unit ! USB2.
Chapter 3 Switch Settings on back of unit Figure 1 S3 S2 S1 C2 C1 C1 – Analog audio connectors C2 – Interface cable connector S1 – Duplicator and External switch Up position = Duplicator Center .
DVD DigiCopier Switch Settings description # Copy, Test, Test and Copy - after placing the source CD and a Blank Disc into the target DVD±R/ RW drive, the copy controller will detect if the disc in the writer is a blank one. If it is a blank disc, the copy controller will aut omatically begin copying after 5 seconds.
Chapter 4 Using the DVD±R/RW DigiCopier as a Stand Alone DVD±R/RW Copier # Connect the power cable to the back of the DVD DigiCopier. # Plug in the Power Cord to the AC Power Source (+90~+250VAC) # Set the switch (S1 on figure 1, page 6) at the back to Duplicator position.
length DVD movie may take 30 minutes to copy onto a 2X certified DVD±R Addonics Technologies – DVD±R/RW Di giCopier Users Guide v1.0 8.
Chapter 5 Using DVD DigiCopier as an external DVD±R/RW on your PC Installation # Connect the power cable to the back of the DVD DigiCopier. # Plug in the Power Cord to the AC Power Source (+90~+250VAC) # Connect the Interface cable to the back of the DVD DigiCopier and the other end to your computer or Notebook interface port.
USB 2.0 interface cable # The USB model comes with High Speed USB2.0 cable, which is capable of burning or copying DVD or CD at the maximum speed of the drive. # Since USB 2.0 Hi-Speed is an evol ution of the existing USB 1.1 specification, it is fully forw ard and backward compatible with current USB systems.
USB driver installation For Win98 and Win98SE 1. Make sure your computer is up and running. 2. Insert the USB cable to the USB Port. 3. A "New Hardware Found" message shall pops up. 4. Follow the ON SCREEN wizard and point to the location of A:USBWIN98 for the driver.
Firewire interface cable installation Attach the Firewire interface cable to the computer connector (C2, figure 1 on Page 6) at the back of the DVD DigiCopier firm and securely – you should not be able to disconnect the c able without pressing the release notch.
Serial ATA Cable Installation Attach the USB-IDE cable’s “ MC 36 Connector ” to your Addonics Mobile Drive firm and securely – you should not be able to disconnect the cable without pressing the release notch.
Chapter 6 Software Installation CD Mastering Software installation: 1. Load the CD Mastering Disc onto the DVD±R/RW drive of the DVD DigiCopier (make sure you set the unit to operate as an External DVD±R/RW Burner – re fer to Chapter 5, page 8). 2.
Chapter 7 Playing Audio CDs You can use the Addonics DVD DigiCopi er drive to play regular music CDs. • Place the audio disc onto the bottom DVD±R/RW drive • To listen or Play audio CD’s throug.
Technical Support If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Addonics Technologies DVD R/RW è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Addonics Technologies DVD R/RW - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Addonics Technologies DVD R/RW imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Addonics Technologies DVD R/RW ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Addonics Technologies DVD R/RW, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Addonics Technologies DVD R/RW.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Addonics Technologies DVD R/RW. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Addonics Technologies DVD R/RW insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
