Manuale d’uso / di manutenzione del prodotto VEZ del fabbricante Bosch Appliances
Vai alla pagina of 144
AutoDome Easy II IP VEZ Series en Installation Manual.
.
AutoDome Easy II IP Table of Cont ents | en 3 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 T able of Contents 1S a f e t y 7 1.1 Important Safety Instructions 7 1.2 Safety Precautions 10 1.3 Important Notices 10 1.4 Customer Support and Service 17 2 Unpacking 18 2.
4 en | Table of Cont ents Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 7 Installing a Pipe Mount 52 7.1 Description 52 7.1.1 Tools/Supplies Required 53 7.1.2 Preparing the Ceiling for Installation 53 7.
AutoDome Easy II IP Table of Cont ents | en 5 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 12 Configuring the AutoDome Easy II IP 86 12.1 Basic Mode: Device A ccess 87 12.2 Basic Mode: Date/Time 88 12.3 Basic Mode: Network 89 12.
6 en | Table of Cont ents Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 15 Keyboard Commands by Number 122 16 Preventive Maintenance 127 17 Troubleshooting 128 17.1 AutoDome Easy II IP Operation and Control 129 18 BVIP Firmware Updates 132 18.
AutoDome Easy II IP Safety | en 7 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 1S a f e t y 1.1 Impor tant Safety Instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all wa rnings on the unit and in the operating instructions be fore operating the unit.
8 en | Saf e ty Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 7. Control adjustment - Adjust only those controls specif ied in the operating instructions . Improper adjustment of other controls may cause damage to the unit.
AutoDome Easy II IP Safety | en 9 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 12. Damage requiring service - Unplug the unit from the main AC power source and refer.
10 en | Saf e ty Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 1.2 Safety Precautions 1.3 Impor tant Notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to persons and/or severe damage to the unit.
AutoDome Easy II IP Safety | en 11 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 switch as the main disconnect device for switch ing off the voltage to the unit.
12 en | Saf e ty Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Environmental statement - Bosch has a strong commitment to the environment. This unit has been designed to respect the environment as much as possible.
AutoDome Easy II IP Safety | en 13 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring. Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
14 en | Saf e ty Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. FCC & ICES INFORMATION (U.S.A.
AutoDome Easy II IP Safety | en 15 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 INFORMATIONS FCC ET ICES (modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux norm es FCC partie 15.
16 en | Saf e ty Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product.
AutoDome Easy II IP Safety | en 17 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 1.4 Customer Suppor t and Ser vice If this unit needs service, contact the nearest Bosch Security Systems Service Center for author ization to return and shipping instructions.
18 en | Unpac king AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 2 Unpacking This equipment should be unpack ed and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.
AutoDome Easy II IP Unpac king | en 19 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 2.2 Safety Rules To ensure safety, the following warnings are spe cified: – The device must be installed and maintained by skilled technical personnel.
20 en | Descript ion AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 3 Description The AutoDome Easy II is part of a larger building block for any surveillance/security system. By using multiple keyboard controllers and multiple dome cameras, no place is too large for monitoring.
AutoDome Easy II IP Description | en 21 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Refer to Section 11 Using the AutoDome Easy II IP, page 74 for software and infrastructure requirements for an AutoDome Easy II IP installation.
22 en | Installing a Surface Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 4 Installing a Sur face Mount 4.1 Descrip tion This chapter details how to moun t the AutoDome Easy II to a hard surface.
AutoDome Easy II IP Installing a Surface Mount | en 23 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 4.1.1 Additional Tools Required – Appropriate straight s lot screwdrivers – No. 2 Phillips screwdr iver – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – 4 in.
24 en | Installing a Surface Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 2. Install a 4 in. gang box or sq uare metal junction box (not supplied). Ensure junction box and mounting screws are capable of supporting a maximum load of 11.
AutoDome Easy II IP Installing a Surface Mount | en 25 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 4.1.3 Preparing the Surface Mo unt for an Outdoor Installation Th.
26 en | Installing a Surface Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 3. Drill the four (4) holes in th e installation location. Use a minimum screw length of 10 mm (.39 in.). 4. Prepare the surfac e so that it can support a maximum load of 11.
AutoDome Easy II IP Installing a Surface Mount | en 27 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 7. Attach the retaining ring wi th gasket (item 2, below) to the Surface Mount Junction Box. These parts are supplied with the AutoDome Easy II Outd oor Camera.
28 en | Installing a Surface Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 10. Attach the Surface Mount Ju nction Box to the surface using four (4) user-supplied M4 or #10 pan head screws (screws not supplied).
AutoDome Easy II IP Installing a Surface Mount | en 29 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 12. Secure the mounting plate to the Surface Mount Juncti on Box with the three (3) M4 – .7 x 8 Ph illips pan head machine screws.
30 en | Installing a Surface Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 5. Unlock the single safety locking screw on the base of the unit using the user-supplied Allen wrench. Figu re 4.9 Unlock Safety Locking Screw 6.
AutoDome Easy II IP Installing a Surface Mount | en 31 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8. Attach the camera to the mounting plate by inserting the vertical tab into the recessed slot on the top of the camera dome to the right of th e safety locking screw.
32 en | Installing a Surface Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 10. Outdoor Installation : Thread the 2.89 mm I.D. by Ø1.78 mm O-ring (item 1, below) onto the Safety Screw. 11. Secu re the safety loc king sc rew with the user supplied locking torx wrench (T-10).
AutoDome Easy II IP Installing a W all Mount | en 33 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 5 Installing a W all Mount 5.
34 en | Installing a W all Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 5.1.1 Additional Tools Required – Appropriate stra ight slot screwdrivers – No.
AutoDome Easy II IP Installing a W all Mount | en 35 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 3. Attach a grounded metal co nduit to the junction box clamp. Figure 5. 2 Metal Conduit 4. Feed the wires through the conduit.
36 en | Installing a W all Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 8. Secure with the appropriate user-provided SEMS scr ews that have an integral lock wa sher to dig through the paint and ensure an electrical gr ound connection to the arm housing or ground lug.
AutoDome Easy II IP Installing a W all Mount | en 37 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 2. Use the four (4) holes at the end of the Wall Mount as a template to mark the position where the holes should be drilled to secure the mount.
38 en | Installing a W all Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 6. Attach the mounting cap to the arm. Using the AutoDome Easy II Outdoor Installation Ki t, apply the following O-ring and the retaining ring to the locations specified below: Figu re 5.
AutoDome Easy II IP Installing a W all Mount | en 39 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8. Place the Wall Mount flat gask et (item 1, below), between the surface and Wall Mount; then secure the mount using four (4) appropriate user-p rovid ed fasteners such as Moly or Toggle bolts.
40 en | Installing a W all Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 5.1.4 Installing the Camera to the Mounting Plate To install the camera to the mounting plate, do the following: 1.
AutoDome Easy II IP Installing a W all Mount | en 41 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 6. Unlock the single safety locking screw on the base of the unit using the user-supplied Allen wrench. Figure 5. 8 Unlock Safety Locking Screw 7.
42 en | Installing a W all Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 9. Attach the camera to the mounting plate by inserting the vertical tab into the recessed slot on the top of the camer a dome to the right of th e safety locking scre w.
AutoDome Easy II IP Installing a W all Mount | en 43 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 11. Outdoor Installation : Thread the 2.8 9 mm I.D. by Ø1.78 mm O-ring (item 1, below) onto the Safety Screw. 12. Secure the safety locking screw with the user supplied locking torx wrench (T-10).
44 en | Installing a Recessed Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 6 Installing a Recesse d Mount 6.
AutoDome Easy II IP Installing a Recessed Mount | en 45 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 6.1.2 Preparing the Ceiling for Installation To mount to a recess mo unt, do the following: 1. Determine a secure location for the recessed mount (supplied separately).
46 en | Installing a Recessed Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 4. Align holes of mounting plate (supplied with dome) with mounting bracket and attach with screws.
AutoDome Easy II IP Installing a Recessed Mount | en 47 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 6. For AutoDome Easy II IP models : Adjust the clamping plate so that the bracket with plate is in the upper position.
48 en | Installing a Recessed Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 6.1.3 Installing the Camera to the Mounting Plate To install the base to a surfac e or suspended ceiling using the supplied mounting plate, do the following: 1.
AutoDome Easy II IP Installing a Recessed Mount | en 49 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8. Plug the matching connectors from the camera into the mating connectors from the ceiling. Figure 6. 6 Match Connectors 9.
50 en | Installing a Recessed Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 11. Rotate the camera approxim ately 15 degrees to the right and lock firmly into place, as shown i n the next illustration.
AutoDome Easy II IP Installing a Recessed Mount | en 51 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 12. Ensure unit is centered. Figure 6. 9 Align T rim Ring 13. Align trim ring so screws align with off center holes.
52 en | Installing a Pipe Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 7 Installing a Pipe Mount 7.
AutoDome Easy II IP Installing a Pipe Mount | en 53 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 7.1.1 Tools/Supplies Required – Appropriate straight s lot screwdrivers – No.
54 en | Installing a Pipe Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 2. Use the four (4) holes in the flange as a template to mark the position where the holes should be drilled to secure the mount.
AutoDome Easy II IP Installing a Pipe Mount | en 55 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Figure 7. 3 Location of O-rings for an outdoor installation a. Thread a 21.82 mm I.D. by Ø3.00 mm O-ring (item 1, above) between the flange threads and the upper coupler threads.
56 en | Installing a Pipe Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 6. Outdoor Installation : Ensure that the gasket is attached to the retaining ring. If the gask et and the retaining ring are separate: a.
AutoDome Easy II IP Installing a Pipe Mount | en 57 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Figure 7. 4 O-ring and retaining ring for outdoor installation a. Thread the 21.82 mm I. D. by Ø3.00 mm O-ring (item 1, above) onto the lower pipe threads.
58 en | Installing a Pipe Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 9. Pull the wires from the pipe, starting at the flange end. Figu re 7.5 At tach Pendant Pipe Mount to Ceiling 10. Attach user supplied ground lug.
AutoDome Easy II IP Installing a Pipe Mount | en 59 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 11. Align holes of mounting pl ate (supplied with dome) with dome mounting cap and attach with the three (3) screws supplied (Figure 1 .
60 en | Installing a Pipe Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 7.1.3 Installing the Camera to the Mounting Plate To install the camera to a ceiling mount using the supplied mounting plate, do the following: 1.
AutoDome Easy II IP Installing a Pipe Mount | en 61 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8. Attach the camera to the mounting plate by inserting the vertical tab into the recessed slot on the top of the camera dome to the right of th e safety locking screw.
62 en | Installing a Pipe Mount AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 10. Outdoor Installation : Thread the 2.89 mm I.D. by Ø1.78 mm O-ring (item 1, below) onto the Safety Screw. 11. Secu re the safety loc king sc rew with the user supplied locking torx wrench (T-10).
AutoDome Easy II IP Preparing the Wiring | en 63 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8 Preparing the Wiring The wiring requirements for th e various AutoDo me Easy II models differ slightly.
64 en | Preparing t he Wiring AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 8.2 Connecting the P owe r The AutoDome Easy II IP is avai lable as an indoor or as an outdoor model.
AutoDome Easy II IP Preparing the Wiring | en 65 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8.2.1 Power Connections to Indoor Cameras Figu re 8.
66 en | Preparing t he Wiring AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 8.2.2 Power Conn ection s to Outdoor Cameras Figure 8.
AutoDome Easy II IP Preparing the Wiring | en 67 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 8.2.3 Power Connections to Heater (all outdoo r models) Figu re 8.3 Powe r C a bl e To connect the power to outdoor heaters: 1.
68 en | Preparing t he Wiring AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. WARNING! The indoor camera models can accept power from the 24 VAC power input or from the Ethern et input. Ensure that the camera receives power from only one source .
AutoDome Easy II IP Alarms and Relay Connections | en 69 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 9 Alarms and Rela y Connections 9.
70 en | Alarms and Relay Connections AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 9.2 Connecting Alarms (inputs 1 through 2) You can configure alarms 1 throug h 2 as Normally Open (N.O.) or Normally Closed (N.
AutoDome Easy II IP Alarms and Relay Connections | en 71 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 9.2.2 Connecting a Normally Closed Alarm 1. Connect the alarm to the appr opriate input (1 through 2) and ground at the AutoDome Easy II.
72 en | Alarms and Relay Connections AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 9.3 Alarm Outputs The AutoDome Easy II incorpor ates one (1) alarm output: a dry contact relay. Figure 9.4 N.O. - Normally Open 9.
AutoDome Easy II IP G et ting Star ted | en 73 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 10 G e t ting Star te d Once the installation is complete , the AutoDome Easy II can be programmed. A typical system includes a keyboard, matrix switcher, monitor, and appropriate wiring connections.
74 en | Using the A uto Dome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 11 Using the AutoDome Easy II IP The AutoDome Easy II IP tran smits PTZ control commands and images over a TCP/IP network.
AutoDome Easy II IP Using the Aut oDome Easy II IP | en 75 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 11.1 Overview of F eatures The AutoDome Easy II IP mo dule includes the following functionality: Function Description Video Encoding The camera uses the H.
76 en | Using the A uto Dome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 11.2 Syst em Requirements The AutoDome Easy II IP requires spe cific software and hardware to allow a user to view live images and to configure camera settings over a TCP/IP network.
AutoDome Easy II IP Using the Aut oDome Easy II IP | en 77 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 11.3 Connecting the AutoDo me Easy II IP to the PC 1. Install the AutoDome Easy II IP according to the instructions in this manual.
78 en | Using the A uto Dome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 11.4 Configuring the Au toDome Easy II IP Camera To operate the camera in your network you must assign it a valid network IP address.
AutoDome Easy II IP Using the Aut oDome Easy II IP | en 79 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 11.5 The LIVEP A G E Once the connection is established, the Web browser displays the LIVEPAGE . It shows the live video image on the right of the browser window.
80 en | Using the A uto Dome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Image Selection You can view the image of the camera in diff erent displays.
AutoDome Easy II IP Using the Aut oDome Easy II IP | en 81 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 1. To control a peripheral, cl ick the appropriate controls. 2. Move the mouse curs or over the video image. Additional options for controlling peripherals ar e displayed with the mouse cursor.
82 en | Using the A uto Dome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. System Log / Event Log The Syste m Log field contains information about the operating status of the AutoDome Easy II IP and the connection.
AutoDome Easy II IP Using the Aut oDome Easy II IP | en 83 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Aux Control Tab The Aux Control tab is used to enter p re-programmed keyboard control commands. See Section 15 Keyboard Commands by Number, page 12 2 , for a list of all commands.
84 en | Using the A uto Dome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. To Enter a Keyboard Control Command: 1. Place the cursor in th e Command Number field. 2. Click the desired command number via the on -screen keypad.
AutoDome Easy II IP Using the Aut oDome Easy II IP | en 85 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 11.6 Saving Snapsho ts You can save individual imag es from the video sequence currently shown on the LIVEPAGE in JPEG format on your computer's hard drive.
86 en | Configuring the Aut oDome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 12 Configuring the AutoDome Easy II IP The SETTINGS page provides access to the configuration menu, which contains all the unit's pa rameters arranged in groups.
AutoDome Easy II IP Configuring the AutoDome Easy II IP | en 87 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Making Changes Each configuration screen shows the current settings. You can change the settings by entering new values or by selecting a predefined value from a list field.
88 en | Configuring the Aut oDome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. With the user authorization level, you can operate the unit and also control cameras, for example, but you cannot change the configuration.
AutoDome Easy II IP Configuring the AutoDome Easy II IP | en 89 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Time server IP address The AutoDome Easy II IP can rece ive the time signal from a time server using various time server protocols, and then use it to set the internal clock.
90 en | Configuring the Aut oDome Easy II IP Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. that, once an IP addre ss is assigned, it is retained each time the system is reb ooted. IP address Enter the desired IP address for the AutoDome Easy II IP in this field.
AutoDome Easy II IP Configuring the AutoDome Easy II IP | en 91 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 – ISDN (2B) ISDN connections via two B -channels, reso.
92 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 13 On-Scre en Displa y Menu Navigation The AutoDome Easy II is programmed through the on-screen display (OSD) menus.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 93 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Setup Menu Choices: Setup Menu Exit.
94 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 13.2 Camera Se tup Menu The Camera Setup Menu provides access to camera settings that can be changed or customized.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 95 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Camera Setup Menu Choices: Menu Description Sub-menu / Description Default Setting Exit Exits the menu. White Balance Maintains proper color reproduction as the color temperature of a scene changes.
96 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Synch Mode Sets the type of synchronization mode for the camera. INTERNAL : Synchronizes camera to an internal crystal.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 97 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 13.3 Lens Setup The Lens Setup Menu provides access to lens settings that can be changed or customized. Menu items marked with an asterisk ( * ) are the default settings.
98 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Lens Setup Menu Choices: Menu Description Sub-menu / Description Default Setting Exit Saves and exits the menu.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 99 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 13.4 PTZ Setup Menu The PTZ Menu provides access to pan/tilt/zoom settings th at can be changed or customized.
100 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Menu Description Sub-menu / Description Default Setting Exit Exits the menu. AutoPan Adjusts speed of camera during AutoPan and AutoScan.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 101 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 AutoPivot Automatically rotates the camera 180º when following a subject traveling directly beneath the camera.
102 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 13.5 Display Setup Menu Provides access to display setti ngs that can be changed or customized. Menu items with an * are the default settings.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 103 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Camera OSD Controls how the OSD displays camera response information, such as Digital Zoom, Iris open/close, and Focus near/far.
104 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Privacy Masking Allows masking of sensitive areas. Up to 12 privacy masks are available, with a maximum limit of eight (8) to a scene.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 105 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 13.5.1 Specifying a Shot or a Sector Title The AutoDome Easy II provides an alphanumeric character palette used to specify a title fo r a shot (scene) or for a sector (zone).
106 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 13.6 Communication Setup Menu The Communication Setup Menu provides access to baud rate and Bilinx control settings.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 107 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Baud Rate Manually se ts the baud rate when AutoBaud is set to OFF. Choices are 2400, 4800, 9600, 19200, 38400, and 57600.
108 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 13.7 Alarm I/O Se tup The Alarm Setup Menu provides access to the Alarm I/O Setup Menu to establish the alarm inputs and outputs and to configure alarm rules.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 109 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Alarm Setup Menu Choices: Outputs Setup Menu Menu Description S ub-menu / Description Default Setting Exit Saves and exits the menu.
110 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Outputs Setup Menu Choices Menu Description Sub-menu / Description Default Setting Exit Saves and exits the menu.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 111 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 13.8 Alarm I/O Rule Setup Menu The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an existi ng rule.
112 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Rule Setup Menu Choices Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows you to configure a rule from previously defined alarm inpu ts and outputs.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 113 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Input Toggles through a list of valid inputs set in the Alarm I/O Setup > Inputs Setup Menu that define the rule's inputs.
114 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 13.9 Language Menu The Language Menu provides access to a list of languages to display the on-screen menus. Language Menu Choices: Language Exit.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 115 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 13.10 Diagnostics Menu The Diagnostics menu provides acce ss to a list of diagnostic tools and events. Diagnostic Events Diagnostics Exit.
116 en | On-Screen Display Menu Navigation AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. BIST Enters the Perform Built-in Self Tests menu. If confirmed, the BIST tests start and the results are displayed.
AutoDome Easy II IP On-Screen Displa y Menu Navigation | en 117 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Video Loss Events Displays the number of time that video was lost. Total Time On Displays the total of time that the video was on.
118 en | Common User Commands (unlo ck ed) AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 14 Common User Commands (unlock ed) This chapter details the commonly used Bosch keyboard setup commands. See Section 15 Keyboard Commands by Number , page 122 , for a complete list of commands.
AutoDome Easy II IP Common User Commands (unloc ke d) | en 119 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 14.2 Set ting Preset Shots Preset shots are saved camera position s. Shots are saved as scenes, therefore, the terms SHOT and SCENE are used interchangeably.
120 en | Common User Commands (unlo ck ed) AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. To add or remove scenes to Preposition Tour: 1. Press SHOT-900-ENTER to access the Add/Remove Scenes Menu . 2.
AutoDome Easy II IP Common User Commands (unloc ke d) | en 121 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 To Record Tour B: 1. Press ON-101-ENTER to start recording the tour. 2. Press OFF-101-ENTER to stop the tour.
122 en | K eyboard Commands by Num ber Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 15 K eyboard Commands b y Number Locked Alarm Rule Output Function Key Comm No.
AutoDome Easy II IP K eyboard Com mands by Number | en 123 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 YO n / O f f 3 5 W h i t e Balance Mode Enters White Balance .
124 en | K eyboard Commands by Num ber Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. YO n 6 1 D i s p l a y Adjust Adjust On-screen Display On 62 Pre-position Title menu Enters Pre-position Title menu.
AutoDome Easy II IP K eyboard Com mands by Number | en 125 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Y On/Of f 90* Command Lock/Unlock On–lock on Off–lock off.
126 en | K eyboard Commands by Num ber Auto Dome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Set 110 Factory P/T home position Set–recalibrate home pos.
AutoDome Easy II IP Prev entive Maint enance | en 127 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 16 Preve nt i ve M ai n ten an ce The following preventive maintenance s chedule allows detection and correction of mino r faults before they become serious and cause equipment failure .
128 en | T roubleshooting Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 17 T roubleshoo ting If you experience difficulties op erating your AutoDome Easy II camera, refer to the following. If the guidelines do not enable you to solve the problem, con tact an authorized technician.
AutoDome Easy II IP T roubleshoot ing | en 129 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 17.1 AutoDome Easy II IP Operation and Control Malfunction Possible causes Recommended solution No connection between the unit and terminal program.
130 en | T roubleshooting Aut oDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. No connection established, no image transmission. The unit's configuration. Check all configuration parameters. Faulty installation.
AutoDome Easy II IP T roubleshoot ing | en 131 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 Control of cameras or other units is no t possible. The cable connection between the serial interface and the connected unit is not correct.
132 en | BVIP F irmw are Updat es AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. 18 BVIP Firmwar e Update s The AutoDome Easy II IP incorp orates a network video server in the IP module.
AutoDome Easy II IP BVIP F irmwar e Updates | en 133 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 7. Click OK to the warning message to continue the firmware upload, or Cancel to stop the upload. The page displays a progress bar as the firmware is uploaded.
134 en | Index AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. Inde x A adjusting AutoDome orientation 101 brightness 103 vertical position 103 AES .
AutoDome Easy II IP Index | en 135 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 commands autopan 118 Aux Off 82 Aux On 82 clear 119 inactivity operation 120 keyboard.
136 en | Index AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. E encoding 75 video 75 event log 82 extended AT W 95 F files JPEG 75 MPEG-4 76 focus .
AutoDome Easy II IP Index | en 137 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 M manual iris 98 maximum zoom speed 98 menus Alarm Setup 108 Camera Setup 94 Communic.
138 en | Index AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc. PTZ Setup menu 99 AutoDome orientation 101 autopan 100 AutoPivot 101 AutoScan 100 fre.
AutoDome Easy II IP Index | en 139 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03 synchronization mode 96 crystal 96 line lock 96 synchronize 88 system log 82 T TCP/IP.
140 en | Index AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc..
AutoDome Easy II IP Index | en 141 Bosch Security Systems, Inc. Installation Manual F .01U.164.576 | 2.0 | 2010.03.
142 en | Index AutoDome Easy II IP F .01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc..
.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2010; Data subject to change.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bosch Appliances VEZ è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bosch Appliances VEZ - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bosch Appliances VEZ imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bosch Appliances VEZ ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bosch Appliances VEZ, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bosch Appliances VEZ.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bosch Appliances VEZ. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bosch Appliances VEZ insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.