Manuale d’uso / di manutenzione del prodotto THE DCN del fabbricante Bosch Appliances
Vai alla pagina of 31
SC & SI Remote Interface Description en SC & SI Remote Interface Description.
SC & SI Remote Interface Description en | 2 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Table of Contents 1 Introduction ...................................................................................
SC & SI Remote Interface Description en | 3 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 1 Introduction 1.1 Purpose The purpose of this document is to describe the remote interface for system conf iguration and system installation.
SC & SI Remote Interface Description en | 4 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 2 System configuration and system installation 2.
SC & SI Remote Interface Description en | 5 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Some remote functions are supp orte d in more than one system mode, or in an other mode than the congress system mode.
SC & SI Remote Interface Description en | 6 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 3 System Configuration Functions 3.1 Introduction The system configuration functio ns d escribed in this section are needed to query the set-up of the DCN- system from the CCU.
SC & SI Remote Interface Description en | 7 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Response structure from the function The function returns the fol.
SC & SI Remote Interface Description en | 8 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description about the environment the CCU is functioning.
SC & SI Remote Interface Description en | 9 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 3.6 SC_C_GET_CCU_CONFIG Purpose Retrieve information about all units connected to the congress network. This func tion returns for each unit connected its unit-number and type.
SC & SI Remote Interface Description en | 10 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description • DCNC_UNIT_CHAIRMA N • DCNC_UNIT_DELEGATE _CARD • DCNC_UN.
SC & SI Remote Interface Description en | 11 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 3.8 SC_C_STOP_DQS Purpose Indicate the CCU that the remote controller n o long er requires to access the databa se inside the CC U.
SC & SI Remote Interface Description en | 12 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 1..MAX_CARD_CODE. This is the numeric code present on the identification card hande d over to the delegate and which is to be used in combination with attendance registration and access control.
SC & SI Remote Interface Description en | 13 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Availability This function is available in CCU system mode congress.
SC & SI Remote Interface Description en | 14 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Related functions SC_C_START_DQS SC_C_MAINT_CCU_DB SC_C_DOWN LOAD_CCU_DB SC_C_CCU_ APPLY_ONE 3.
SC & SI Remote Interface Description en | 15 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 4 System Configuration notifications 4.1 Introduction This chapter defines the set of update notifi cations co ncerning SC send by the CCU.
SC & SI Remote Interface Description en | 16 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Single-Multi System , i.
SC & SI Remote Interface Description en | 17 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 4.2 SC_C_CCU_REBOOT Purpose Notifies the remote controller that the CCU has restarted.
SC & SI Remote Interface Description en | 18 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 4.6 SC_C_DISCONNECT_SLAVE_CCU Purpose Notifies the remote controller that the master-CCU ha s lost connection to one of his sl ave-CCU’s.
SC & SI Remote Interface Description en | 19 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 5 System Installation Functions 5.1 Introduction The system installation functions p rovi de functionalit y to connect unit identification with the seat numbers used within the congress-hall.
SC & SI Remote Interface Description en | 20 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Note that: Upon communication loss this function will be activa ted, if SI_C_START_INSTALL was activated. Availability This function is available in CCU syste m mode config.
SC & SI Remote Interface Description en | 21 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Error codes returned SI_E_NOERROR SI_E_FAILED SI_E_INVALID_UNITTYPE Related functions SI_C_START_INSTALL SI_C_STOP_INSTALL 5.
SC & SI Remote Interface Description en | 22 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description 6 System Installation notifications 6.1 Introduction This chapter defines the set of update notification s co ncerning SI send by the CCU.
SC & SI Remote Interface Description en | 23 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX A. V ALUES OF THE DEFINES In this document a lot of definitions are given, whic h have values connected to them.
SC & SI Remote Interface Description en | 24 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description #define SC_C_SINGLETRUNC 0x04 #define SC_C_MULTITRUNC 0x08 #defi.
SC & SI Remote Interface Description en | 25 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX B. ERROR CODES Responses returned up on a remote function request contain an error field (‘wError’). In this appendix an overview is given of the possible erro rs and their values.
SC & SI Remote Interface Description en | 26 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Database Query Ser vices Error code Value Explanation The use of function SC_C_CCU_APPLY_ONE is not possible, because currently there is no database present in the CCU.
SC & SI Remote Interface Description en | 27 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX C. EXAMPLES In the examples below the remote functi ons.
SC & SI Remote Interface Description en | 28 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description if (error != SI_E_NOERROR) { /* do error handling */ } This ends the global seat assi gnm ent. The remote controller has now a complete list of all seats and thei r correspondi n g unit-numbers.
SC & SI Remote Interface Description en | 29 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description After this sequence handling the ne wly added units are again assigned to seats. This also finished the operational installation mo de, so we can leave the installation mode.
SC & SI Remote Interface Description en | 30 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description APPENDIX D. ERROR CODES Responses returned up on a remote function request contain a error field (‘wErro r’). In this app endix an overview is given of the possible erro rs and their values.
For more information please visit www.bosc hsecuritysystems.com © 2003 Bosch Security Systems B.V. Data subject to ch ange without notice December 2003 | SC & SI Remote Interface Desc ription.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Bosch Appliances THE DCN è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Bosch Appliances THE DCN - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Bosch Appliances THE DCN imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Bosch Appliances THE DCN ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Bosch Appliances THE DCN, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Bosch Appliances THE DCN.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Bosch Appliances THE DCN. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Bosch Appliances THE DCN insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
