Manuale d’uso / di manutenzione del prodotto CDC A01 del fabbricante Blaupunkt
Vai alla pagina of 17
Changer CDC A01 Operating and Installation Instructions http://www .blaupunkt.com.
2 Thank you for choosing this Blaupunkt product. We hope that you will enjoy it for a long time to come. Please read these Operating Instruc- tions before using the product for the first time. Our editors constantly strive to make our Operating Instructions clear and easy- to-understand.
3 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS SAF ET Y IN STR U C TION S Safet y Instruc t ions When carrying out installation work and making connections please observe the following safety instructions: - Electronic vehicle systems may fail if they are incorrectly installed or ser- viced.
4 B efore I nst alling t he Equipment T ransport Locking S crews The mechanism in the CD changer is “locked” by the transport screws during shipping. Make certain to remove these screws before installing the changer . Note: After removing the transport locking screws, place the enclosed seals over the screw holes.
5 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS P osit ion of t he Built-in Ant i- Vibrat ion Armature This device can be installed horizontally (suspended), vertically , or at a 45 ° ang- le. Once you have chosen an installation procedure, you have to set the position of the built-in anti-vibration armature accordingly .
6 US I N G TH E CHANG E R For vertical installation: The built-in anti-vibration armature should be set to the “90” position. For installation at a 45 ° angle: The built-in anti-vibration armature should be set to the “45” position. Using t he Changer Loading a CD 1.
7 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS Y ou can load up to ten CDs. Inst alling t he Magazine 1. Slide the cover to the right. 2. First make certain that the magazine is oriented so that the CD labels face up and so that the magazine faces in the proper direction for installation.
8 Handling CDs New CDs The following symptoms often occur when using new CDs: - The CD does not play evenly after being inserted . - The changer changes to the next CD before it has finished playing the first CD. - The changer plays the same CD over and over again.
9 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS 4. After use, return the CDs to their pro- tective cases to avoid major scratches that can lead to skipping on playback. 5. Never store CDs where they are ex- posed to direct sunlight, high humid- ity , or high temperatures over long periods.
10 8-pin DIN cable 1 x Seals 1 x Double-sided adhesive tape 2 x PARTS US E D I N IN ST ALL A TION W iring Reset F unct ion Y ou must use a ballpoint pen or a thin piece of metal to press the reset but- ton. It should be pressed in the follow- ing situations: - During initial installation of the unit, after wiring has been completed.
11 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS Inst allation Procedure for Inst allat ion on Carpet ( Horizont al P osition ) 1. - Make certain that the built-in anti-vi- bration armature has been set to the “0” position on both the right and left sides.
12 I N ST ALL A TIO N 4. - Using a knife, cut through the carpet directly above the bolts of the mount- ing bracket (B). - Replace the carpet in its original po- sition, so that the bolts poke through the carpet. 5. - Using the hex bolts again, refasten the changer on top of the carpet.
13 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS I N ST ALL A TIO N 2. - Lift up the carpet and decide where you want to mount the unit. - Fasten the double-stick tape sup- plied to the bottoms of the brackets (B) and remove the protective back- ing from the tape.
14 I N ST ALLA TIO N Inst allation Procedure for Inst allat ion on Carpet ( at a 45 ° Angle) 1. - Set the built-in anti-vibration arma- ture to the 45 ° position “45” on both the right and left sides. - Using the hex bolts (M4 x 5), fasten the left and right brackets (A).
15 FRANÇAIS ENGLISH ESP AÑOL PORTUGUÊS I N ST ALL A TIO N 4. - Using a knife, cut through the carpet directly above the screws of the mounting bracket (B). - Replace the carpet in its original po- sition, so that the screws poke through the carpet.
16 2. - Determine where you want to install the unit and drill four mounting holes. 3. - Fasten the CD changer using the tap screws (M5 x 12). 3,6 ø I N ST ALLA TIO N.
Service numbers / Numéros du service après-vent e / Números de servicio / Números de serviço␣ Country: Phone: Fax: WWW: Germany (D) 0180-5000225 05121-49 4002 http://www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Blaupunkt CDC A01 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Blaupunkt CDC A01 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Blaupunkt CDC A01 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Blaupunkt CDC A01 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Blaupunkt CDC A01, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Blaupunkt CDC A01.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Blaupunkt CDC A01. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Blaupunkt CDC A01 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
