Manuale d’uso / di manutenzione del prodotto GS-1008 del fabbricante ZyXEL Communications
Vai alla pagina of 32
Dimension GS-1008/GS-1016 Gigabit Ethernet Switch User’s Guide Version 1.0 May 2003.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch ii Copyright Copyright Copyright © 2003 by Zy XEL Communications Corporation The contents of this publ ication m ay not be repro duced in any pa rt .
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch ZyXEL Limited Warranty iii ZyXEL Limited W arranty ZyXEL warrants to the original end user (pur chaser) that this product is free from any defects in m aterials or workm anship for a peri od of up to two (2) years from the dat e of purchase.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch iv Interference Statements and Warnings Interference Statements and Warnings FCC Interference S tatement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This devi ce may not cause ha rmful inte rference.
Dimension GS-1008 Giga bit Ethernet Switch Interference Statements and Warnings v Certifications Refer to the product page at www.zyxel.com ..
.
Dimension GS-1008 Giga bit Ethernet Switch Customer Support vii Customer Support If you have questions a bout your Zy XEL product or desire assistance, contact Zy XEL Communications Corporation office.
.
Dimension GS-1008 Giga bit Ethernet Switch Table of Contents ix T able of Content s Copyright ...................................................................................................................... ... ii ZyXEL Limited War ranty .......
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch x Table of Contents 2.4.4 Front P anel LEDs.................................................................................. 2-6 Chapter 3 Trouble shooting ...........................................
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch List of Figures/Tables xi List of Figures Figure 1-1 GS-1008 ...................................................................................................... 1-1 Figure 1-2 Backbone Sw itch Applica tion .
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch xii Preface Preface Congratulations on your purchase of the Dimension GS-1008 /GS-1016 Gigabit Ethernet Switch. This preface introduces you to the Dim e nsion GS-1008/GS-1016 Gigabit Ethernet Switch and discusses the organizat ion and co nventions of this User ’s Guide.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Getting to Know the 1-1 Chapter 1 Getting to Know the GS-1008/ GS-1016 This chapter describes the key features, benefits and appli cations of the GS- 1008/GS-1016. The GS-1008/ GS-1016 is designe d for the campus or build ing envir onment as a high bandwidth backbon e.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch 1-2 Getting to Know the • 16 1000Base -T Ethernet po rts on the GS -1016 • Auto-sensing (auto MDI/MDI X) for all ports • Embedded MAC address t.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Getting to Know the 1-3 Figure 1-2 Backbone S w itch Application.
.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Hardware Description and Installation 2-1 Chapter 2 Hardware Description and Installation This section shows two switch installa tions, describes the switch hardware and gives a functional overview of the switch.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch 2-2 Hardware Description and Installation Figure 2-1 Attaching Rubber Feet Do not block the ventilation holes. Le ave sp ace between switches when st acking. 2.2 Rack-mounted Inst allation The switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with othe r equipm ent.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Hardware Description and Installation 2-3 Figure 2-2 Attaching Mounting Bracke t s and Screws 2. After attaching both mounting brackets, position the switch in the rack by lining up the holes in the brackets with the ap propriate holes on the rac k.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch 2-4 Hardware Description and Installation 2.3 Rear Panel The ventilation fan and th ree-pronged power receptacle are located on the rear panel of the switch. Figure 2-4 GS-1008 Rear Panel Figure 2-5 GS-1016 Rear Panel 2.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Hardware Description and Installation 2-5 Figure 2-7 GS-1016 Front Panel 2.4.1 100/1000Mbp s RJ-45 Auto-negotiating Ports The GS-1016 has 16 1000Mbps RJ-45 ports. The GS-1008 has eight 100/1 000Mbps RJ-45 ports.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch 2-6 Hardware Description and Installation 2.4.4 Front Panel LEDs The LEDs give real-time status informat ion.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Hardware Description and Installation 2-7 Table 2-2 Front Panel LED Descriptions LED COLOR STATUS DESCRIPTION On The switch is turned on and receiving p ower. PWR Green Off The switch is off or not receiving power.
.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Troubleshooting 3-1 Chapter 3 Troubleshooting This section describes common problems you may encounter with the switch in your network and possible solutions. 3.1 Introduction Troubleshoot the switch using th e LEDs to detect problems.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch 3-2 Troubleshooting Table 3-2 Troubleshooting LK/ACT L ED STEPS CORRECTIVE ACTION 2 Make sure the Ethernet adapters ar e working on the attached devices. 3 Verify that proper network cable type is used and its length does not exc eed 100 meters.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Troubleshooting 3-3 Table 3-5 Troubleshooting Improper Net w ork Cabling and Topology DESCRIPTION PROBLEMS AND CORRECTIVE ACTION Faulty cables Using faulty network cables may affect data rates and have an impact on your net work performance.
.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Product Specifications A Appendix A Product S pecifications This section provides the specifications of the switch. GENERAL Standards IEEE802.3u 100Base-TX Fast Et hernet (twisted-pair copper) ANSI/IEEE802.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch B Product Specifications LED Per Port (GS-1008: (4 LEDs) 100, 1000, LK/ACT (Link/Activity), FD (Full-duplex) Per Port (GS-1016: (3 LEDs) 1000, LNK/AC.
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch Index C Index 1 1000Base-T ..................................... 1-1, 1-2 8 802.3....................................................... 1-1 802.3ab ...................................................
Dimension GS-1008/GS-1 016 Gigabit Ethernet Switch D Index Non-standard netw ork cab les .................. 3-3 P Package Cont ents.................................... 1-2 Plug-and-Pl ay .........................................1-2 Power Connec tion..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ZyXEL Communications GS-1008 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ZyXEL Communications GS-1008 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ZyXEL Communications GS-1008 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ZyXEL Communications GS-1008 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ZyXEL Communications GS-1008, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ZyXEL Communications GS-1008.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ZyXEL Communications GS-1008. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ZyXEL Communications GS-1008 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
