Manuale d’uso / di manutenzione del prodotto P420 del fabbricante Zebra
Vai alla pagina of 54
Part Number No. 980292-001 Re v . A Use r ' s Manual P420 Zeb r a T echnologies Corporation.
.
RETURN MA TERIALS AUTHORIZA TION COPYRIGHT NOTICE This document contains infor mation proprietary to Zebra T echnologies Corporation . This document and the infor mation contained within are copyrighted by Zebra T echnologies Cor- poration and may not be duplicated in full or in part by any person without written approval from Zebra .
iv DECLARA TIONS OF CONFORMITY Model: P420 conforms to the following specification: FCC Part 15, Subpart A, Section 15.107(a) and Section 15.109(a) Class A digital device Supplemental Information: This device complies with Part 15 of the FCC Rules.
v INTRODUCTION Thank you for choosing the Eltron P420 Plastic Card Printer . These printers produce cards ideal for personalised identification, access control, visitor , membership, promotion and luggage card, badges and tags. This manual guides you to efficient start up and operation of your new Card Printer .
vi Important general information Mechanical hazard, such as one associated with moving parts, capable of resulting in equipment damage or personal injury. Electrical hazard, such as an exposed voltage point, capable of causing electrical shock and personal injury.
4 3 2 1 vii T able of Contents PRINTING A SAMPLE CARD ............................................ 19 A- Install Driver on windows 95/98 ...................................... 20 B- Install Driver on windows NT4 . 0 ...................................
APPENDIX A - MAGNETIC CARD STRIPE ENCODER ......... 39 Introduction .................................................................. 39 A- Media Loading Orientation ............................................... 40 B- Magnetic Encoder Cleaning ....
Y our P420 printer ships in a carton and protective anti-static bag. Keep all packing material in case you need to move or re-ship the printer . While unpacking, inspect the carton to ensure that no damage occured during shipping. Please ensure that you have a clean and nearly dust free environment for proper operation and storage of the printer .
If any items are missing, please contact your dealer . 2 In addition to user documentation, make sure the following items are included with your P420 printer: T o reorder , please refer to Appendix C of this manual.
Y our P420 printer has an LCD Display, two LED's and two Panel Buttons. 3 The 16 character LCD Display is used for : Showing the printer's current status Providing operator and servi.
4 The following will guide you through the installation of your P420 printer . CAUTION : Limit AC power supplied to the P420 Printer to 110 - 230 V AC, 60 - 50 Hz for an associated 680 mA - 310 mA. Limit excess current draw to 16 amps or less, using an associated cir- cuit breaker or other such device.
5 O PERA TION The following shows the features found on your P420 Printer: 2.1 Printer Features PLEASE NOTE : Any blue items inside the printer can be operated by the user . ST ANDARD FEA TURES 1. Print Head 2. Print Head Unlock lever 3. Manual Holder 4.
6 The P420 Printer requires approved ribbons (See Appendix C). The Resin Ther mal T ransfer and Dye Sublimation ribbons are specifically designed for your P420 Printer . For optimum per for- mance and printer life (Print Head), always use approved ribbons.
7 3. Load ribbon onto the supply spindle (under print head carriage) and empty core (with tape attached) onto the take- up spindle. Make sure the ribbon comes off the top of the supply spindle and feeds to the top of the take-up spindle. 4. Push down on the Print Head Lock Le- ver until an audible 'click' signals the locked-down position.
T o help you load, print, and collect cards, the P420 has the following items: 1. Open Card Feeder Cover by putting your fingers on both sides and rotating the cover in a clockwise direction to the open position. 2. Install cards into Feeder* as shown.
9 * See Chapter 6, T echnical Specifications, for card requirements and capacities. DO NOT bend cards or touch print surfaces as this can reduce print quality. The sur- face of the cards must remain clean and dust free. Always store cards in an enclosed container .
B - INST ALL CARD CLEANING CARTRIDGE 1. Remove Card Cleaning Cartridge from packaging. 3. Make sure the arrow on top of the assembly is facing toward the rear of the printer . Hook assembly into slot on printer and rotate down. Ensure the assembly locks in place.
C - CARD THICKNESS CONTROL LEVER This item is operated by the user to prevent more than one card feeding into the printer at the same time and causing a jam. D - CARD OUTPUT HOPPER This item is used for collecting printed cards. I nstall Card Output Hopper onto printer by hooking over bottom edge of card exit aperture.
The P420 Printer is equipped with a Rejected Card Box. When an encoding can not be completed, the card is ejected into the Rejected card box. The P420 Printer counts the number of cards which go into the Rejected Card Box.
3. Swing up the Rejected Card Box Door and press the top. An audible "click" signals the locked position. 4. Press the Clear Button on the front panel to re-start the current printer job and to clear the rejected cards counter .
14 A Manual Feed Slot is available on the side of the Card Feeder cover for feeding single cards. Cleaning Cards are fed manually through this slot. The Feeder must be empty for manual card feeding to work properly. For one-at-a-time printing, feed cards through slot on side of Feeder .
15 With ribbon and cards loaded, your P420 printer is ready to print. T o check the operation of the printer you should print a test card. 1. Press the Menu Button until the LCD screen shows "SELF TEST" 3. A test card will print after a few seconds.
16 The printer is equipped with a LCD Display and two key buttons which gives access to printer menus. When the Menu button to enter the Menu Mode. The top line display shows menu information. The second line of display clarifies the function of the two [NEXT] and [SELECT] key buttons relative to the current menu item.
CLEAN PRINT HEAD T o clean the Ther mal Print Head and card transport system CLEAN MAG.HEAD* T o clean the magnetic Encoder Head GO TO MAIN MENU TEST P A TERN T o print a printer test card PRINT P ARA.
18.
19 P RINTING A SAMPLE CARD Printing with the P420 Printer requires the Windows Printer Driver , your card design/issuing software or printer command level programming through the printer interface. The P420 Card Printer can be used with any Windows 95/98 or Windows NT 4.
The Printer Wizard will copy the necessary files to the PC for you and the P420 printer driver installation will be completed. 20 This installation uses floppy drive 'A' or from CD Rom as the installation drive with the printer used as stand alone.
Once the printer driver has been successfully installed, you will need to configure it for your printer . This driver provides control of several printer features when printing from Windows applications. These features are accessed through the P420 Plastic Card Printer Pr operties .
22 ° Once you are ready to print, go to File and point Print ° The printer will feed in a card and start printing ( the data download time will vary depending on the complexity of the card design and the processing speed of your computer). ° Once the printing job is achieved the card is ejected from the printer .
23 C LEANING PROTECT YOUR F ACTOR Y W ARRANTY ! The recommended maintenance procedures must be performed to maintain your factory warranty. Other than the recommended cleaning procedures described in this manual, allow only Zebra authorised technicians to service the P420 Printer .
24 Y our P420 Printer includes a simple cleaning system using the Pre-Saturated Cleaning Cards provided. The regular use of these cards will clean and maintain important parts of your printer: including the Print Head, and T ransport Rollers. WHEN TO CLEAN When LCD screen reports message.
25 1. Raise Print Head and remove the Ribbon. 2. Clean Print Head by moving alcohol- moistened swab tip side-to-side across Print Head elements. Only use moderate force. (T o reorder swabs see Appendix C). Never use a sharp object to scrape deposits from the print head.
26 Y our P420 Printer also has a Card Cleaning Cartridge. This item cleans the cards entering the printer . T o ensure print quality, the cleaning roller requires periodic replacements. WHEN TO MAINT AIN When LCD screen reports message. Run a printer cleaning first .
27 * See Appendix C for replacement Cleaning Rollers. SLOT Although the CLEAN PRINTER message is displayed until maintenance has been performed, the printer will continue to operate. 5. Carefully peel off wrapper from new Cleaning Roller while in Cartridge.
T ROUBLESHOOTING This section offers solutions to potential problems you may experience with your P420 printer . The table below lists the screen messages that will be displayed on the printer's LCD, both during normal operation and to alert operator of any error conditions.
SCREEN MESSAGE ACTION PRINTING BLACK PRINTING V ARNISH PRINT HOLOGRAM CLEAN PRINTER CLEAN MAG HEAD CLEANING REMOVE RIBBON OUT OF RIBBON MECHANICAL ERROR OUT OF CARD ROT A TION ERROR COVER OPEN HEAD OP.
31 SCREEN MESSAGE MEANING ACTION ENCODING ERROR READING ERROR REJECT BOX FULL MAGNETIC ERROR FLASH ERROR NO ACCESS Data cannot be written or read from the card's magnetic stripe Data cannot be read from the card's magnetic stripe The reject box is full The printer cannot detect a magnetic stripe on the card.
32 5.2 Print Quality Issues TROUBLESHOOTING Solution A1. Check that cards are stored in a dust free environment A2.Use a different supply of cards. B1.Perform a Cleaning of the printer (see Cleaning section). B2.Replace Cleaning Roller (see Cleaning section).
33 TROUBLESHOOTING Possible Cause A .Ribbon may ha ve been stored improperly or is damaged. B.Cards may not meet specifications. C.Contrast and/or Intensity may be set to values which are too high. D.Dust or embedded contamination on elements of the Print Head.
34 TROUBLESHOOTING Possible Cause A.Ribbon may not be installed in the printer B.Cards may not meet specifications. C.Cable on Print Head may be disconnected. D.Print Head elements may be scratched or burnt. Solution A1.Check for ribbon in the printer .
35 T ECHNICAL SPECIFICA TIONS General Colour Printing High speed printing, over 102 cards/hour edge to edge in full color (YMCKOK) throughput Small footprint Windows Drivers for 95/98 and NT 4.
36 ISO ST ANDARD DIMENSIONS FOR PLAIN CARD ISO ST ANDARD DIMENSIONS FOR MAGNETIC STRIPE CARD CHIP POSITION FOR SMART CARD CARD DIMENSIONS TECHNICAL SPECIFICA TIONS.
37 Ribbons * Monochrome: 1500 cards/roll Monochrome colors: black, red, blue, green, yellow, silver , gold, white. K-resin + O: 800 cards/roll K-dye + O: 800 cards/roll YMCKO: 350 .
38 Options Centronics Cable RS-232C serial port USB port Smart Card Contact Station (0.76mm cards only) Magnetic Encoder (0.76mm cards only) Cleaning supplies Service Manual *Use only Zebra-approved card and ribbon media. Using non-approved card or ribbon media can void your warranty .
39 A PPENDIX A Operation and maintenance requirements for the P420 Printer with the optional magnetic card stripe encoder . (See Chapter 2 for location).
40 APPENDIX A ONL Y USE cards that comply with ISO 7810 & 7811 standards for magnetic stripe cards. The magnetic stripe must be flush to the surface of the card to work properly.
ISO ST ANDARD ENCODING * Bit per inch Except the '?' character Including Start, Stop and LRC characters. Also note that these 3 characters are automatically managed by the magnetic encoder according to the ISO Standard Norms. NOTE: Refer to the Card Printer Programmer's Manual for complete programming information.
42 A PPENDIX B This section contains information on the additional operations of the P420 Printers with Smart Card Contact Stations. (See Chapter 2 for location.) Smart Cards can have a built-in microcomputer and a battery. Card Memory can store fingerprints, voice recognition patterns, medical records and other such data.
43 Position the cards with the Smart Card Chip at the top of the card and towards the printer . When a command to the parallel printer interface sends a card to the Smart Card Contact Station, the printer connects the Smart Card Contact Station to the female DB-9 connector on the rear of the printer .
800015-101 800015-102 800015-103 800015-104 800015-106 800015-107 800015-109 800015-185 800015-301 800015-302 800015-303 800015-304 800015-305 800015-306 800015-307 800015-309 Black 1000 images Re d 1.
45 The following plain white plastic cards are available for use in the P420 printers: CARDS Many other card types are also available; ask your dealer for more information. APPENDIX C Notes : 10mil = 0.254mm; 30mil = 0.762mm 10 mil cards are recommended for single side printing and monochrome only.
46 Accessories available for P420 Printers appear below. Always refer to the part number when placing an order . ACCESSORIES APPENDIX C 300320-001 206851-001 105909-112 Centronics Parallel Cable (36 p.
980292-001A Zebra T echnologies Corporation Eltron Card Printer Products 1001 Flynn Road Camarillo, CA. 93012-8706.USA Phone:+1 (805) 579 1800 Fax.:+1 (805) 579 1808 T oll Free in US: (800) 452-4056 e-mail:cards@eltron.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Zebra P420 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Zebra P420 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Zebra P420 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Zebra P420 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Zebra P420, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Zebra P420.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Zebra P420. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Zebra P420 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
