Manuale d’uso / di manutenzione del prodotto DX ZAP del fabbricante Zap
Vai alla pagina of 22
Patent #5,491,390 #5,671,821 • Other Patents Pending ZAPWORLD.COM where transportation is going One ZAP Drive •117 Morris Street • Sebastopol California 95472 U.S.A. tel (707) 824-4150 • fax (707) 824-4159 e-mail: zap@zapworld.com • Stock Symbol:ZAPP ©2001 ZAPWORLD.
YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS BICYCLE. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.
STOP STOP BEFORE YOU ZAP YOUR BIKE! IMPORTANT! PLEASE READ CAREFUL LY: SINCE YOUR EXISTING INSURANCE POLICY M AY NOT PROVIDE COVERAGE FOR ELECTRIC BICYCLES, YOU SHOULD CON TACT YOUR INSURANCE COM PANY OR INSURANCE AGENT TO DETERMINE IF COVERAGE IS PROVIDED.
ongratulations on your purchase of a ZAP Electric Bike or Power System. In the com - ing years you will find many ways to use your ZAP — commuting, exercise, errands, or simply for fun! Welcome to the world of ZAP electric Bikes! - Is clean, non-polluting and in traffic, faster than your car.
3 Table of Contents BEFORE YOU BEGIN ..................................................................................................................................1 INTRODUCTION .....................................................................
1 2 3 4 5 6 7 8 10 18 13 11 12 1) ZAP Motor Unit 2) Battery Pack 3) Throttle Switch Assembly 4) Battery Tray 5) Main Power Switch 6) Motor / Controller Leads 7) Controller Power Connector 8) Auxiliary.
SEAT STAYS DOWN TUBE CRANK BATTERY TRAY CHAIN STAYS TOP TUBE SEAT TUBE BATTERY PACK THROTTLE SWITCH Detail of ZAP PowerBike ® MINIMUM FIT DIMENSIONS FOR ZAP POWER SYSTEM (TRAY MODEL) Do not use ZAP System on bikes without metal seat stays!!! 13” 5” -- DX DRIVE SYSTEMS (4.
INTRODUCTION Welcome electric bicycle owner! Thank you for pur - chasing your ZAP Electric Bicycle - we are confident that you will love it. The innovative ZAP Power System you have pur - chased will bring you many hours of fun and enjoyment. However, before you start enjoying your bike, some assembly is required.
7) CONNECTING THE REAR BRAKE CABLE Step 1) At the rear brake assembly, located at the back wheel, unhook the rear brake cable barrel end. This made easier by squeezing the cantilever brakes towards the rim to decrease the cable tension in order to unhook the rear brake cable barrel end from the brake unit.
IMPORTANT! PLEASE READ CAREFUL LY: Along with your kit, we’ve included an invoice, owner’s manual, and a warranty form. Please read the warranty carefully and fill out the form on the back. You must return the warranty form within 10 days of receiving your ZAP Power System in order to activate the warranty.
• T ake the Bridge Mount and position it on the seat stay bridge, centered and aligned with the seat stays. • Insert one of the motor mount bolts through the bottom hole of the Bridge Mount and finger-tighten it into the bottom hole of the Threaded Plate.
Engagement Lever Operation Rider Power Only The engagement cam is in the “up” position, and the motors are off and hang free, just clearing the tire. This mode is for riding when power is not needed and allows the rider to pedal without any drag from the motor.
Speed Selection Your ZAP Power System is equipped with a 2-speed controller. This controller has speeds of Low (10 mph maximum) and High (18 mph maximum). You must pedal to start. Your actual speed depends on a number of variables such as how much you pedal, rider weight, tire pressure, incline angle, wind resistance, etc.
PRE-OPERATIONAL SAFETY WARN - INGS 1. Read and understand this owner’s manual carefully before using this unit. Be thoroughly familiar with the proper use of your ZAP Power System. 2. Thoroughly inspect your ZAP Power System for loose or damaged parts before each use.
9. Do not disassemble the charger. The charger is not serviceable; disassembly may result in a risk of electric shock or fire. 10. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any cleaning of the charger. 11.
It is a good idea to periodically go through this checklist to make sure that your ZAP Power System and your bike are in proper adjustment for safety and optimal performance.
Battery Care To ensure your new ZAP battery gives its best performance, these following suggestions must be followed. 1) Your ZAP Power System should be stored and charged at temperatures between 50° F (10° C) and 100° F (38° C). 2) Keep your battery charged.
16 Troubleshooting Guide Read the following section carefully. This guide will help your ZAP Power System achieve maximum performance. If you cannot adjust your electric bike using this guide, call ZAP at (707) 824-4150. Our customer service representatives will be glad to help you.
ALW AYS WEAR A HELMET WHEN RIDING Pedals 350 in. lbs. Seat Post Bolt Clamp 75-100 in. lbs. Seat Clamp Single Bolt 120-145 in. lbs. Double Bolt 72-96 in. lbs. Headset Topnut 300 in. lbs. Handlebar Binder Bolt 175-260 in. lbs. Hub Axle Locknut 88-220 in.
ZAPWORLD.COM • One ZAP Drive 117 Morris Street, Sebastopol CA 95472 USA tel (707) 824-4150 fax (707) 824-4159 e-mail: zap@zapworld.com • Stock Symbol:ZAPP ZAP is a Publicly Traded Company ZAPWORLD.COM where transportation is going ©2001 ZAPWORLD.
ZAP BUYER’S CHECKLIST As members of a new transportation industry, our staff and management would like to thank you for purchasing your ZAP electric bicycle from us. As in many recreational activities, accidents can and do occa - sionally occur. It is for this reason that we specifically bring the following points to your attention.
FROM : ZAPWORLD.COM One ZAP Drive 117 Morris Street Sebastopol California 95472 USA ATTN: Warranty Department ZERO AIR POLLUTIO N ® PLACE FIRST CLASS POSTAGE HERE ò FOLD HERE ò ZAP® warrants each new ZAP product for three (3) months according to the following terms.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Zap DX ZAP è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Zap DX ZAP - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Zap DX ZAP imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Zap DX ZAP ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Zap DX ZAP, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Zap DX ZAP.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Zap DX ZAP. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Zap DX ZAP insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.