Manuale d’uso / di manutenzione del prodotto ZWF 91483 WR LINDO 300 del fabbricante Zanussi
Vai alla pagina of 20
EN ZWF 91483WH ZWF 91483WR User Manual Washing Machine.
Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programme Chart 6 Consumption values 7 Options 8 Settings 9 Before first use 9 Daily use 9 Hints and tips 12 Care and cleaning 13 Troubleshooting 15 Technical Data 17 Subject to change without notice.
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets.
• The first time you use the appliance, make sure that there is no leakage. Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging.
Control panel Control panel description Quick 1400 90° 60° 40° 30° 1200 800 Intensive Easy Iron Rinse Only Drain & Spin Cottons Synthetics Delicates Wool/Handwash Duvets Mix 20° Cotton ECO P .
Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) 30' @ 30° 30 °C 3 kg 800 rpm A short cycle for synthetics and delicate items with light soil level or for items to freshen up.
Pro- gramme Quick 1) In- ten- sive Easy Iron Rinse Only Drain & Spin Delicates ■ ■ ■ ■ ■ ■ ■ ■ ■ Wool/Hand- wash ■ ■ ■ ■ ■ ■ Duvets ■ ■ ■ ■ ■ ■ Mix 20° ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Off Mode (W) Left On Mode (W) 0,48 0,48 The information given in the chart above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. Options Temperature With this option you can change the default temperature.
The display shows the number of hours and the indicator above the button is on. Extra Rinse With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on.
Make sure not to put too much laundry in the drum. Refer to max. loads indicated in "Programme chart". 4. Close the door. CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.
A tune sounds when the appliance is activated. The appliance performs a start up animation. The animation quickly shows each washing programme and the default temperature and spin settings. The display shows the word On. Setting a programme 1. Touch the programme button and set the programme: • The indicator of the button flashes.
CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. To open the door during the first minutes of the cycle (or when the operates) : 1. Touch the button to pause the appliance. 2. Wait until the indicator goes off.
• Remove hard stains. • Wash with a special detergent heavy soil stains. • Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase. • Do not wash in the appliance laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.
Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this: • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent.
WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. Troubleshooting WARNING! Refer to Safety chapters. Introduction The start of the appliance does not occur or it stops during operation.
Problem Possible solution The appliance does not drain the water. • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. • Make sure that the connection of the drain hose is correct. • Set the drain option if you set a programme without drain phase.
If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. Service We recommend the use of original spare parts. When contacting the Authorised Service Centre, make sure that these data are available.
18 www.zanussi.com.
www.zanussi.com 19.
www .zanussi.com/shop 192974980-B-242014.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Zanussi ZWF 91483 WR LINDO 300 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Zanussi ZWF 91483 WR LINDO 300 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Zanussi ZWF 91483 WR LINDO 300 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Zanussi ZWF 91483 WR LINDO 300 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Zanussi ZWF 91483 WR LINDO 300, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Zanussi ZWF 91483 WR LINDO 300.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Zanussi ZWF 91483 WR LINDO 300. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Zanussi ZWF 91483 WR LINDO 300 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
