Manuale d’uso / di manutenzione del prodotto MDX-E100 del fabbricante Yamaha
Vai alla pagina of 24
/ INPUT ANALOG DIGIT AL REC LEVEL MIN MAX REC/P AUSE – + MDX-E100 O WNER’S MANU AL MODE D’EMPLOI BEDIENUNGSANLEITUNG BR UKSANVISNING MANU ALE DELL ’UTENTE MANU AL DE INSTR UCCIONES GEBR UIKSAA.
E-2 CA UTION: READ THIS BEFORE OPERA TING Y OUR UNIT . 1. This unit is a sophisticated mini disc recorder. To ensure proper operation for the best possible performance, please read this manual carefully. 2. Install your unit in a cool, dry, clean place with good ventilation.
E-3 English CONTENTS Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully.
E-4 FRONT PANEL ~ STANDBY/ON (P.7) Ÿ Disc insertion slot (P.7) ! (P.7) ⁄ & (P.7) @ # / * (P.7) ¤ REC/PAUSE (P.11) P ART DESCRIPTIONS / STANDBY/ON NATURAL SOUND MINIDISC RECORDER MDX-E100 INPUT ANALOG DIGITAL REC LEVEL MIN MAX REC/PAUSE – + # Remote control sensor (P.
E-5 English • You can also use the remote control supplied with the YAMAHA receiver RX-E100 to execute main operations of this unit. (Refer to the owner’s manual of RX-E100/CDX-E100.) REMOTE CONTROL ~ DELETE/CANCEL (P.19) Ÿ TITLE (P.19) ! CHAR (P.
E-6 75 Ω UNBAL. FM ANT ANALOG DIGITAL OPTICAL SYSTEM CONNECTOR IN L D OUT 1 IN 2 OUT MAINS R C IN IN 6 Ω MIN./SPEAKER SPEAKER SUBWOOFER OUT SYSTEM CONNECTOR GND AM ANT L D OUT TAPE MD CD AUX MAINS.
E-7 English PLA YB A CK Preparations • Press STANDBY/ON ( POWER on the remote) to turn this unit on. • Set the RX-E100 receiver to MD. To pause Press # / * ( * on the remote). Press again to resume playback (or press # on the remote). To stop Press & .
E-8 During playback Press DISPLAY repeatedly to display the following information. 1 Current track number and elapsed time 2 Time remaining on the current track 3 Track title If the track has not been given a name, “No Title” is displayed.
E-9 English RANDOM PLAY You can have the unit play all the tracks on a disc in random order. To start random playback Press RANDOM . The RANDOM indicator lights up and “- - - - - : - - ” appears in the display while the unit selects a track. Playback starts automatically.
E-10 4 Press PROGRAM to confirm the program. 5 Press # to start program playback. To check the programmed data 1 Stop or pause program playback. 2 Press $ or › to skip through the step information (or use the jog dial on the front panel). To change a step 1 Stop program playback.
E-11 English RECORDING This unit allows you to make recordings from a wide variety of program sources (both analog and digital). When recording an analog source (such as an FM broadcast or cassette) this unit converts the analog signals to a 44.1 kHz digital signal before recording them onto the MD.
E-12 6 Adjust the recording levels. (See “Adjusting Recording Levels” on this page.) Before proceeding to the next step, be sure to reset the source to be recorded to the beginning. 7 Press # / * ( # on the remote) to start recording. The TOC indicator lights up.
E-13 English SYNCHRO RECORDING The synchronized recording function lets you set this unit to start recording automatically when a sound signal is input. 1 Load the sound source into the source component. If necessary, program, or select the track you want to start recording from before proceeding to the next step.
E-14 MONITOR OUT When a disc is not loaded, you can use the monitor out function to monitor the sound of the input source. 1 Press to remove the disc. 2 Press INPUT repeatedly to select the input connected to the sound source you want to monitor. 3 Press REC/PAUSE .
E-15 English EDITING One of the main advantages of MD is its editing capabilities. You can remove the commercials from a radio broadcast, reorder songs into the order you want, remove songs, combine songs, and even remove part of a song. This unit offers the following editing operations.
E-16 ERASE The ability to erase sound without having to re-record is a convenient function of MD. You can erase the entire disc, a single track, or just part of a track. Disc Erase This operation lets you erase all audio and title (character) data to create a blank MD.
E-17 English MOVE This function lets you change the position of any track. When you move tracks, all tracks are automatically renumbered. Example: Moving track 2 to the track number 4 1 Use $ or › to select the track you want to move. 2 Press EDIT repeatedly to display “Move ?”, then press SET/ENTER .
E-18 DIVIDE This function lets you divide one track into two separate tracks by adding a new track number to a specified point in the track. Example: Dividing track 3 1 Play the track you want to divide. 2 Use ! or ⁄ to locate the point where you want to divide the track, then press * to pause at that position.
E-19 English This function lets you title recorded MDs and the individual tracks. Titles may consist of uppercase and lowercase letters, numbers, and symbols for a maximum of up to 250 characters for each title. TITLING 1 To title a disc Press & to stop playback.
E-20 MD SYSTEM LIMIT A TIONS The recording system in your MD recorder is radically different from those used in cassette and DAT decks and is characterized by the limitations described below. Note, however, that these limitations are inherent to the MD recording system and are not a result of mechanical trouble.
E-21 English COPY PRO TECTION (SCMS) As a digital audio component, this MD recorder conforms with the Serial Copy Management System (SCMS) standards. The Serial Copy Management System restricts copies made by recording digital signals to first-generation copies only.
E-22 TROUBLESHOOTING If your MD recorder fails to operate normally, check the following table. It lists common operating errors and simple measures which you can take to correct the problem.
E-23 English SPECIFICA TIONS Inputs LINE IN (REC) Type: pin jack Standard input level (50 k-ohms): 300 mV DIGITAL IN (OPTICAL) (2) Type: square optical connector jack Outputs LINE OUT (REC) Type: pin jack Standard output level (1 kHz, 0 dB): 2.0 ± 0.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Yamaha MDX-E100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Yamaha MDX-E100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Yamaha MDX-E100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Yamaha MDX-E100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Yamaha MDX-E100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Yamaha MDX-E100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Yamaha MDX-E100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Yamaha MDX-E100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
